/Modules/Mechanical/WINDGAUGE01A/CAD/lopatky.scad
--- WINDGAUGE01A/CAD/rotor1.scad (nonexistent)
+++ WINDGAUGE01A/CAD/rotor1.scad (revision 4272)
@@ -0,0 +1,105 @@
+$fn=40; // model faces resolution.
+
+prumer_rotoru1=50;
+vyska_rotoru1=5;
+prumer_sroubu=3.2;
+vyska_matky=3;
+prumer_orechu=10;
+sila_materialu=3;
+sila_materialu_vule=0.2;
+hloubka_prekryti=2;
+
+
+//lopatka
+hloubka_uchytu=20;
+sila_uchytu=12;
+vyska_uchytu=10;
+tolerance_uchytu=0.1;
+
+difference()
+{
+union ()
+{
+
+ cylinder (h = vyska_rotoru1-hloubka_prekryti, r=prumer_rotoru1/2, center = true, $fn=100);
+
+
+ translate([0,0,vyska_rotoru1/2])
+
+ cylinder (h = hloubka_prekryti, r=(prumer_rotoru1/2) -sila_materialu-sila_materialu_vule, center = true, $fn=100);
+
+//otvory pro lopatky
+ translate([0,0,-(vyska_rotoru1-hloubka_prekryti)/2-(vyska_uchytu+tolerance_uchytu)/2])
+ komponent();
+
+ }
+
+//otvory pro uchyceni krytky rotoru
+ translate([0,0,hloubka_prekryti/2])
+cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
+
+translate([0,0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2])
+cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
+
+
+//otvor pro uchyceni prvni lopatky
+ translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,hloubka_prekryti/2])
+cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
+
+translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2])
+cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
+
+//otvor pro uchyceni druhe lopatky
+ rotate(a=[0,0,120])
+ translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,hloubka_prekryti/2])
+cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
+
+rotate(a=[0,0,120])
+translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2])
+cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
+
+//otvor pro uchyceni treti lopatky
+ rotate(a=[0,0,240])
+ translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,hloubka_prekryti/2])
+cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
+
+rotate(a=[0,0,240])
+translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2])
+cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
+
+}
+
+
+
+
+
+
+module komponent()
+ {
+ difference ()
+ {
+ cylinder (h = vyska_uchytu+tolerance_uchytu, r=(prumer_rotoru1/2), center = true, $fn=100);
+
+ cylinder (h = vyska_uchytu+2*tolerance_uchytu, r=(prumer_rotoru1/2-hloubka_uchytu+5), center = true, $fn=100);
+
+ //dira pro prvni uchyt lopatky
+ translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
+ cube([hloubka_uchytu,sila_uchytu+tolerance_uchytu,vyska_uchytu+2*tolerance_uchytu],true);
+
+ //dira pro druhy uchyt lopatky
+
+ rotate(a=[0,0,120])
+
+ translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
+ cube([hloubka_uchytu,sila_uchytu+tolerance_uchytu,vyska_uchytu+2*tolerance_uchytu],true);
+
+ //dira pro treti uchyt lopatky
+
+ rotate(a=[0,0,240])
+
+ translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
+ cube([hloubka_uchytu,sila_uchytu+tolerance_uchytu,vyska_uchytu+2*tolerance_uchytu],true);
+
+ }
+
+ }
\ No newline at end of file
/Modules/Mechanical/WINDGAUGE01A/CAD/rotor2.scad
0,0 → 1,95
$fn=40; // model faces resolution.
 
prumer_rotoru1=50;
vyska_rotoru1=5;
vyska_rotoru2=5;
prumer_sroubu=3.2;
vyska_matky=3;
prumer_orechu=10;
sila_materialu=3;
sila_materialu_vule=0.2;
hloubka_prekryti=2;
 
//lozisko
lozisko_prumer_vnitrni=5;
lozisko_prumer_vnejsi=16;
lozisko_prekryv=1.5;
 
//nastevní rotoru2
vyska_kryti=5;
 
//lopatka
hloubka_uchytu=20;
sila_uchytu=12;
vyska_uchytu=10;
tolerance_uchytu=0.1;
 
difference()
{
union ()
{
cylinder (h = vyska_rotoru2, r=prumer_rotoru1/2, center = true, $fn=100);
 
 
//kryci kroužek
translate([0,0,-(vyska_rotoru2)/2-(vyska_kryti)/2])
komponent2();
}
 
//otvory pro uchyceni krytky rotoru
translate([0,0,hloubka_prekryti/2])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([0,0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
//otvor pro uchyceni prvni lopatky
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
//otvor pro uchyceni druhe lopatky
rotate(a=[0,0,120])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
rotate(a=[0,0,120])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
 
//otvor pro uchyceni treti lopatky
rotate(a=[0,0,240])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
rotate(a=[0,0,240])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
}
 
 
 
 
 
 
module komponent2()
{
difference ()
{
cylinder (h = vyska_kryti, r=(prumer_rotoru1/2), center = true, $fn=100);
cylinder (h = vyska_kryti+0.1, r=(prumer_rotoru1/2-sila_materialu), center = true, $fn=100);
}
}
/Modules/Mechanical/WINDGAUGE01A/CAD/stator1.scad
0,0 → 1,96
$fn=40; // model faces resolution.
 
prumer_rotoru1=50;
vyska_rotoru1=5;
vyska_rotoru2=5;
prumer_sroubu=3.2;
vyska_matky=3;
prumer_orechu=10;
sila_materialu=3;
sila_materialu_vule=0.2;
hloubka_prekryti=2;
 
//lozisko
lozisko_prumer_vnitrni=5;
lozisko_prumer_vnejsi=16;
lozisko_vyska=5;
lozisko_prekryv=1.5;
 
//nastevní rotoru2
vyska_kryti=5;
 
//lopatka
hloubka_uchytu=20;
sila_uchytu=12;
vyska_uchytu=10;
tolerance_uchytu=0.1;
 
difference()
{
union ()
{
cylinder (h = vyska_rotoru2, r=prumer_rotoru1/2, center = true, $fn=100);
 
 
//kryci kroužek
translate([0,0,-(vyska_rotoru2)/2-(vyska_kryti)/2])
komponent2();
}
 
//otvory pro uchyceni krytky rotoru
translate([0,0,hloubka_prekryti/2])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([0,0,-(vyska_rotoru1-hloubka_prekryti)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
//otvor pro uchyceni prvni lopatky
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
//otvor pro uchyceni druhe lopatky
rotate(a=[0,0,120])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
rotate(a=[0,0,120])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
 
//otvor pro uchyceni treti lopatky
rotate(a=[0,0,240])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,0])
cylinder (h = vyska_rotoru1+0.1, r=prumer_sroubu/2, center = true, $fn=100);
 
rotate(a=[0,0,240])
translate([hloubka_uchytu/2+(prumer_rotoru1/2-hloubka_uchytu),0,-(vyska_rotoru2)/2+vyska_matky/2])
cylinder (h = vyska_matky+0.1, r=prumer_orechu/2, center = true, $fn=100);
}
 
 
 
 
 
 
module komponent2()
{
difference ()
{
cylinder (h = vyska_kryti, r=(prumer_rotoru1/2), center = true, $fn=100);
cylinder (h = vyska_kryti+0.1, r=(prumer_rotoru1/2-sila_materialu), center = true, $fn=100);
}
}
/Modules/Mechanical/WINDGAUGE01A/PrjInfo.txt
0,0 → 1,13
[InfoShortDescription.en]
Wind-gauge
 
[InfoShortDescription.cs]
Anemometr
 
[InfoLongDescription.en]
 
 
[InfoLongDescription.cs]
 
[End]
/Modules/Mechanical/WINDGAUGE01A/TODO.txt
0,0 → 1,0