| /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R01.scad |
|---|
| 0,0 → 1,70 |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| module WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti) |
| { |
| difference() |
| { |
| union() |
| { |
| cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2, center = true, $fn=100); |
| //tvorba prekryti statoru |
| difference() |
| { |
| translate([0,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2]) |
| cylinder (h = R01_vyska_preryti_statoru, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2, center = true, $fn=100); |
| translate([0,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2]) |
| cylinder (h = R01_vyska_preryti_statoru+0.1, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100); |
| } |
| } |
| //otvor pro lopatku 1 |
| rotate(a=[0,0,0]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2]) |
| cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true); |
| rotate(a=[0,0,0]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2+R01_sila_materialu_pro_prekriti,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2]) |
| cube([3*R01_sila_materialu_pro_prekriti+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,R01_vyska_preryti_statoru+L01_tolerance_drzaku],true); |
| //otvor pro lopatku 2 |
| rotate(a=[0,0,120]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2]) |
| cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true); |
| rotate(a=[0,0,120]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2+R01_sila_materialu_pro_prekriti,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2]) |
| cube([3*R01_sila_materialu_pro_prekriti+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,R01_vyska_preryti_statoru+L01_tolerance_drzaku],true); |
| //otvor pro lopatku 3 |
| rotate(a=[0,0,240]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2]) |
| cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true); |
| rotate(a=[0,0,240]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2+R01_sila_materialu_pro_prekriti,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2]) |
| cube([3*R01_sila_materialu_pro_prekriti+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,R01_vyska_preryti_statoru+L01_tolerance_drzaku],true); |
| //otvor na hřídelku |
| cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100); |
| } |
| } |
| WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti); |
| /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R02.scad |
|---|
| 0,0 → 1,46 |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| module WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky) |
| { |
| difference() |
| { |
| cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2, center = true, $fn=100); |
| //otvor pro lopatku 1 |
| rotate(a=[0,0,0]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2]) |
| cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true); |
| //otvor pro lopatku 2 |
| rotate(a=[0,0,120]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2]) |
| cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true); |
| //otvor pro lopatku 3 |
| rotate(a=[0,0,240]) |
| translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2]) |
| cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true); |
| //otvor na hřídelku |
| cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100); |
| //otvor pro pomocnou trubicku |
| translate([0,0,-(((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-zapusteni_pomocne_trubicky/2)]) |
| cylinder (h = zapusteni_pomocne_trubicky, r=prumer_pomocne_trubicky/2, center = true, $fn=100); |
| } |
| } |
| WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky); |
| /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R03.scad |
|---|
| 0,0 → 1,43 |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| //kryt_rotoru |
| module WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti, |
| R02_sila_mateiralu_pod_lopatkami) |
| { |
| //kopule |
| difference() |
| { |
| sphere(r = (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)/2, $fn=100); |
| sphere(r = (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2+0.1, $fn=100); |
| translate([0,0,-(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)/2]) |
| cube(size = [(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu), (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu), (R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)], center = true); |
| } |
| //válcová část krytu |
| difference() |
| { |
| //zakladni valec |
| translate([0,0,- |
| R02_sila_mateiralu_pod_lopatkami/2]) |
| cylinder (h = |
| R02_sila_mateiralu_pod_lopatkami, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*R03_sila_materialu)/2, center = true, $fn=100); |
| //válec pro vykrojení |
| translate([0,0,-R02_sila_mateiralu_pod_lopatkami/2]) |
| cylinder (h = R02_sila_mateiralu_pod_lopatkami+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti)/2+0.01, center = true, $fn=100); |
| } |
| } |
| WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti, |
| R02_sila_mateiralu_pod_lopatkami); |
| /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad |
|---|
| 0,0 → 1,112 |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| use <zavity.scad> |
| module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti) |
| { |
| difference() |
| { |
| cylinder (h = S01_vyska_zuzene_casti, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100); |
| cylinder (h = S01_vyska_zuzene_casti+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100); |
| //translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2]) |
| } |
| difference() |
| { |
| cylinder (h = S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, r=(S01_prumer_zavitu+2*S01_sila_materialu)/2, center = true, $fn=10); |
| metric_thread (diameter=S01_prumer_zavitu, pitch=1, length=S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, internal=true, n_starts=6); |
| } |
| } |
| module stator3(stator3_vyska,prumer_rotoru1,lozisko_vyska,sila_pod_loziskem,sila_materialu,vule1,stator3_sila_steny, |
| stator3_vyska_prekryti,prumer_hlavy_sroubu,stator3_vzdalenost_od_steny,lozisko_vyska,prumer_sroubu,roztec_sroubu,uchyt_prumer_sroubu,vyska_stator4,kabel_prumer) |
| { |
| difference() |
| { |
| cylinder (h = stator3_vyska, r=(prumer_rotoru1)/2, center = true, $fn=100); |
| translate([0,0,(stator3_vyska-lozisko_vyska-sila_pod_loziskem)/2]) |
| cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-stator3_sila_steny)/2, center = true, $fn=100); |
| cylinder (h = stator3_vyska+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-1)/2, center = true, $fn=100); |
| translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2]) |
| difference() |
| { |
| cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1+0.1)/2, center = true, $fn=100); |
| cylinder (h = stator3_vyska_prekryti+0.1, r=(prumer_rotoru1-2*sila_materialu-2*vule1)/2, center = true, $fn=100); |
| } |
| //otvory pro uchyceni stator 3 |
| //otvor pro sroub 1 |
| translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0]) |
| cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
| translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2]) |
| cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100); |
| //otvor pro sroub 2 |
| translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0]) |
| cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
| translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,2]) |
| cylinder (h = lozisko_vyska+sila_pod_loziskem+0.1, r=prumer_hlavy_sroubu/2, center = true, $fn=100); |
| } |
| //dno stator3 |
| translate([0,0,-(stator3_vyska-stator3_sila_steny)/2]) |
| difference() |
| { |
| cylinder (h = stator3_sila_steny, r=(prumer_rotoru1)/2, center = true, $fn=100); |
| //otvory pro uchyceni stator 3 |
| //otvor pro sroub 1 |
| translate([0,(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0]) |
| cylinder (h = stator3_sila_steny+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
| //otvor pro sroub 2 |
| translate([0,-(prumer_rotoru1-2*sila_materialu-2*vule1-2*stator3_sila_steny-prumer_hlavy_sroubu-2*stator3_vzdalenost_od_steny)/2,0]) |
| cylinder (h = stator3_sila_steny+0.1, r=prumer_sroubu/2, center = true, $fn=100); |
| //srouby pro uchycení anemometru |
| translate([roztec_sroubu/2,roztec_sroubu/2,0]) |
| cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100); |
| translate([-roztec_sroubu/2,roztec_sroubu/2,0]) |
| cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100); |
| translate([roztec_sroubu/2,-roztec_sroubu/2,0]) |
| cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100); |
| translate([-roztec_sroubu/2,-roztec_sroubu/2,0]) |
| cylinder (h = stator3_sila_steny+0.1, r=uchyt_prumer_sroubu/2, center = true, $fn=100); |
| //dira na kabel |
| cylinder (h = vyska_stator4+0.1, r=(kabel_prumer/2+0.1), center = true, $fn=100); |
| } |
| } |
| WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti); |
| /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/lopatky.scad |
|---|
| 1,96 → 1,50 |
| $fn=40; // model faces resolution. |
| //include <../configuration.scad> |
| //lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu); |
| /* |
| hloubka_uchytu - fefinuje delku zapusteni uchytu lopatky do rotorové casti |
| sila_uchytu - sirka drzaku lopatky zapustene do rotoru |
| vyska_uchytu - definuje vysku drzaku lopatky zapustene do rotoru |
| tolerance_uchytu - mezera pro snadnějsi zasunuti do rotoru |
| prumer_lopatky - prumer lopatky vnejsi |
| sila_materialu_lopatky |
| delka_uchytu_lopaty - delky tycky mezi uchytem do rotoru a lopatkou |
| hrana_uchytu_lopatky - hrana ctvercoveho profilu tycky mezi uchytem do rotoru a lopatkou |
| prumer_rotoru1 - |
| prumer_sroubu - odava prumer sroubu pro uchyceni lopatky |
| */ |
| module lopatka(hloubka_uchytu,sila_uchytu,vyska_uchytu,tolerance_uchytu,prumer_lopatky,sila_materialu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky,prumer_rotoru1,prumer_sroubu) |
| { |
| union() |
| { |
| //prechod lopatka drzak |
| difference() |
| { |
| translate([-hrana_uchytu_lopatky/2,prumer_lopatky/4,0]) |
| cube([hrana_uchytu_lopatky,(prumer_lopatky/2)+5,hrana_uchytu_lopatky],center=true); |
| sphere(d = prumer_lopatky, $fn=100); |
| } |
| difference() |
| { |
| //lopatka |
| sphere(d = prumer_lopatky, $fn=100); |
| sphere(d = prumer_lopatky-2*sila_materialu_lopatky, $fn=100); |
| translate([0,-prumer_lopatky/2,-prumer_lopatky/2]) |
| cube(size = prumer_lopatky); |
| } |
| //uchyt_lopatky - tycka |
| translate([-hrana_uchytu_lopatky/2,prumer_lopatky/2+delka_uchytu_lopatky/2,0]) |
| cube([hrana_uchytu_lopatky,delka_uchytu_lopatky,hrana_uchytu_lopatky],center=true); |
| //uchyt lopatky cast v rotoru |
| translate([-sila_uchytu/2,prumer_lopatky/2+delka_uchytu_lopatky+hloubka_uchytu/2,0]) |
| difference() |
| { |
| cube([sila_uchytu,hloubka_uchytu,vyska_uchytu],center=true); |
| //otvor pro sroub |
| translate([0,0,0]) |
| cylinder(h=vyska_uchytu+1, r=prumer_sroubu/2, center=true, $fn=100); |
| //zaobleni |
| translate([0,+prumer_rotoru1/2-hloubka_uchytu/2,0]) |
| difference() |
| { |
| cylinder(h=vyska_uchytu+1, r=prumer_rotoru1/2+2, center=true, $fn=100); |
| cylinder(h=vyska_uchytu+2, r=prumer_rotoru1/2, center=true, $fn=100); |
| } |
| } |
| //vyrovnávací úsek mezi úchytem v rotoru a úchytem loplatky (tyčkou) |
| translate([0,prumer_lopatky/2+delka_uchytu_lopatky+5/2,0]) |
| difference() |
| { |
| translate([-hrana_uchytu_lopatky/2,0,0]) |
| cube([hrana_uchytu_lopatky,10,hrana_uchytu_lopatky],center=true); |
| translate([-sila_uchytu,+prumer_rotoru1/2-5/2,0]) |
| cylinder(h=vyska_uchytu+1, r=prumer_rotoru1/2, center=true, $fn=100); |
| } |
| } |
| } |
| $fn=40; // model faces resolution. |
| include <../configuration.scad> |
| //Model lopatky |
| module WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky) |
| union() |
| { |
| //prechod lopatka drzak |
| difference() |
| { |
| translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/4,0]) |
| cube([L01_hrana_drzaku_a,(L01_prumer_lopatky/2)+5,L01_hrana_drzaku_b],center=true); |
| sphere(d = L01_prumer_lopatky, $fn=100); |
| } |
| difference() |
| { |
| //lopatka |
| sphere(d = L01_prumer_lopatky, $fn=100); |
| sphere(d = L01_prumer_lopatky-2*L01_sila_materialu_lopatky, $fn=100); |
| translate([0,-L01_prumer_lopatky/2,-L01_prumer_lopatky/2]) |
| cube(size = L01_prumer_lopatky); |
| } |
| //uchyt_lopatky - tycka |
| translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu/2,0]) |
| cube([L01_hrana_drzaku_a,L01_delka_uchytu,L01_hrana_drzaku_b],center=true); |
| //uchyt_lopatky - tycka v rotoru |
| translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu+L01_hloubka_zapusteni/2,0]) |
| cube([L01_hrana_drzaku_a,L01_hloubka_zapusteni,L01_hrana_drzaku_b],center=true); |
| //uchyt_lopatky - v rotoru |
| translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu+L01_hloubka_zapusteni+L01_sila_zapusteni_drzaku/2,0]) |
| cube([L01_hrana_drzaku_a,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_b+2*L01_hloubka_zapusteni_drzaku],center=true); |
| } |
| WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky); |
| /Modules/Mechanical/WINDGAUGE02A/CAD/configuration.scad |
|---|
| 1,117 → 1,152 |
| $fn=40; // model faces resolution. |
| //OBECNE PARAMETRY |
| //---------------------------------------------------------------- |
| //---------------------------------------------------------------- |
| //WINDGAUGE02A_S01 |
| S01_vyska |
| prumer_rotoru1=70; |
| vyska_rotoru1=5; |
| vyska_rotoru2=5; |
| prumer_sroubu=3.2; |
| prumer_hlavy_sroubu=6; |
| vyska_hlavy_sroubu=4; |
| vyska_matky=3; |
| sirka_matky=6.6; |
| sirka_matky_tol=0.175; |
| prumer_orechu=10; |
| sila_materialu=2; |
| sila_materialu_vule=0.2; |
| hloubka_prekryti=0; |
| //lozisko |
| lozisko_prumer_vnitrni=5; |
| lozisko_prumer_vnejsi=16; |
| lozisko_vyska=5; |
| lozisko_prekryv=1.5; |
| //kryt rotoru |
| sila_materialu_krytu=1; |
| //stator1 |
| stator1_sila=2; |
| //stator2 |
| sila_pod_loziskem=1; |
| //stator3 |
| stator3_sila_steny=2; |
| stator3_vzdalenost_od_steny=1; //definuje vzdalenost hlavy sroubu od steny statrou 4 |
| stator3_vyska=60; |
| stator3_vyska_prekryti=10; |
| //uchyt pro anemometr |
| uchyt_prumer_sroubu=3.2; |
| roztec_sroubu=10.16; |
| //nastevní rotoru2 |
| vzdalenost_rot_stat=2; //vzdálenost mezi statorem a rotorem uvnitř(osa Z) |
| vzdalenost_rot_stat2=1.5;//vzdálenost mezi statorem a rotorem (osa Z) |
| //lopatka |
| hloubka_uchytu=20; |
| sila_uchytu=12; |
| vyska_uchytu=10; |
| tolerance_uchytu=0.2; |
| delka_uchytu_lopatky=20; |
| hrana_uchytu_lopatky=4; |
| prumer_lopatky=50; |
| sila_materialu_lopatky=0.8; |
| //parametry uchytu senzoru |
| roztec_der=10.16; |
| vzdalenost_der_x=2*roztec_der; |
| vzdalenost_der_y=1*roztec_der; |
| //magnet |
| magnet_prumer=6.3; |
| magnet_vyska=5; |
| magnet_zapusteni=2; |
| vyska_pod_magnetem=5; |
| //rotor2 |
| delka_hridele=5; //delka hridele koukající ve statoru |
| //rotor2 |
| vyska_kryti=stator1_sila+vyska_matky+vzdalenost_rot_stat+stator3_vyska_prekryti-vzdalenost_rot_stat2; //udává výšku krycího prstence |
| vule1=1.5; //vůle mezi statorem a rotorem ze vnitř (z boku) |
| //uchyt pro anemometr |
| uchyt_prumer_sroubu=3.2; |
| roztec_sroubu=20; |
| //stator 4 |
| vyska_stator4=5; |
| uchyt_vyska_matky=3; |
| uchyt_prumer_orechu=10; |
| //parametr kabelu |
| kabel_prumer=10; |
| $fn=40; // model faces resolution. |
| //OBECNE PARAMETRY |
| //---------------------------------------------------------------- |
| //---------------------------------------------------------------- |
| //Obecné parametry |
| prumer_osicky=3; |
| prumer_pomocne_trubicky=8; |
| zapusteni_pomocne_trubicky=3; |
| vule_mezi_statorem_rotorem=2; //vůle mezi statorem a rotorem + sila materialu statoru |
| //WINDGAUGE02A_S01 |
| S01_vyska=5; |
| //WINDGAUGE02A_L01 //pro lopatku |
| L01_hloubka_zapusteni=3; |
| L01_hloubka_zapusteni_drzaku=5; |
| L01_sila_zapusteni_drzaku=5; //sila drzaku který je v rotoru |
| L01_hrana_drzaku_a=10; |
| L01_hrana_drzaku_b=3; |
| L01_tolerance_drzaku=0.1; |
| L01_delka_uchytu=20; |
| L01_prumer_lopatky=40; |
| L01_sila_materialu_lopatky=3; |
| //WINDGAUGE02A_R01 //rotor s prekritim statoru |
| R01_vyska_preryti_statoru=10; |
| R01_sila_materialu_pro_prekriti=2; |
| //WINDGAUGE02A_R02 //rotor spodni dil |
| R02_sila_mateiralu_pod_lopatkami=5; |
| R02_vzdalenost_mezi_uchyty_lopatek=10; |
| //WINDGAUGE02A_R03 //kryt rotoru |
| R03_sila_materialu=1.5; |
| //WINDGAUGE02A_S01 //stator |
| S01_sila_materialu=2; |
| S01_vyska_zuzene_casti=20; |
| S01_vyska_komponentu_na_lozisko=15; |
| S01_vyska_zavitu_na_nasroubovani_drzaku=15; |
| S01_vyska_na_elektroniku=50; |
| S01_prumer_zavitu=70; |
| prumer_rotoru1=70; |
| vyska_rotoru1=5; |
| vyska_rotoru2=5; |
| prumer_sroubu=3.2; |
| prumer_hlavy_sroubu=6; |
| vyska_hlavy_sroubu=4; |
| vyska_matky=3; |
| sirka_matky=6.6; |
| sirka_matky_tol=0.175; |
| prumer_orechu=10; |
| sila_materialu=2; |
| sila_materialu_vule=0.2; |
| hloubka_prekryti=0; |
| //lozisko |
| lozisko_prumer_vnitrni=5; |
| lozisko_prumer_vnejsi=16; |
| lozisko_vyska=5; |
| lozisko_prekryv=1.5; |
| //kryt rotoru |
| sila_materialu_krytu=1; |
| //stator1 |
| stator1_sila=2; |
| //stator2 |
| sila_pod_loziskem=1; |
| //stator3 |
| stator3_sila_steny=2; |
| stator3_vzdalenost_od_steny=1; //definuje vzdalenost hlavy sroubu od steny statrou 4 |
| stator3_vyska=60; |
| stator3_vyska_prekryti=10; |
| //uchyt pro anemometr |
| uchyt_prumer_sroubu=3.2; |
| roztec_sroubu=10.16; |
| //nastevní rotoru2 |
| vzdalenost_rot_stat=2; //vzdálenost mezi statorem a rotorem uvnitř(osa Z) |
| vzdalenost_rot_stat2=1.5;//vzdálenost mezi statorem a rotorem (osa Z) |
| //lopatka |
| hloubka_uchytu=20; |
| sila_uchytu=12; |
| vyska_uchytu=10; |
| tolerance_uchytu=0.2; |
| delka_uchytu_lopatky=20; |
| hrana_uchytu_lopatky=4; |
| prumer_lopatky=50; |
| sila_materialu_lopatky=0.8; |
| //parametry uchytu senzoru |
| roztec_der=10.16; |
| vzdalenost_der_x=2*roztec_der; |
| vzdalenost_der_y=1*roztec_der; |
| //magnet |
| magnet_prumer=6.3; |
| magnet_vyska=5; |
| magnet_zapusteni=2; |
| vyska_pod_magnetem=5; |
| //rotor2 |
| delka_hridele=5; //delka hridele koukající ve statoru |
| //rotor2 |
| vyska_kryti=stator1_sila+vyska_matky+vzdalenost_rot_stat+stator3_vyska_prekryti-vzdalenost_rot_stat2; //udává výšku krycího prstence |
| vule1=1.5; //vůle mezi statorem a rotorem ze vnitř (z boku) |
| //uchyt pro anemometr |
| uchyt_prumer_sroubu=3.2; |
| roztec_sroubu=20; |
| //stator 4 |
| vyska_stator4=5; |
| uchyt_vyska_matky=3; |
| uchyt_prumer_orechu=10; |
| //parametr kabelu |
| kabel_prumer=10; |