WebSVN – MLAB – /Modules/Mechanical Rev 4452 and /Modules/Mechanical Rev 4462 – Path Comparison

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R04.scad
 ,0 → 1,47
+$fn=40; // model faces resolution.
+include <../configuration.scad>
+//kryt_rotoru
+//dutinka pro upevneni rotoru
+module WINDGAUGE02A_R04 (sila_pod_loziskem,delka_hridele,lozisko_prumer_vnitrni,lozisko_prekryv)
+    {
+    difference()
+        {
+    //dotahovací kroužek
+    translate([0,0,0])
+        cylinder (h = sila_pod_loziskem+delka_hridele+2, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv)/2, center = true, $fn=100);
+    cylinder (h = sila_pod_loziskem+delka_hridele+2+0.1, r=((lozisko_prumer_vnitrni+0.2)/2), center = true, $fn=100);
+        }
+    }
+module WINDGAUGE02A_R05(vyska_pod_magnetem,magnet_zapusteni,magnet_prumer,vyska_hlavy_sroubu,prumer_hlavy_sroubu,prumer_sroubu)
+    {
+        difference()
+        {
+        //segment pro sroub a magnet
+            translate([0,0,0])
+                cylinder (h = vyska_pod_magnetem+magnet_zapusteni, r=(magnet_prumer+5)/2, center = true, $fn=100);
+        //otvor pro magnet
+            translate([0,0,vyska_pod_magnetem/2+0.1])
+                cylinder (h = magnet_zapusteni, r=((magnet_prumer+0.2)/2), center = true, $fn=100);
+        //zapusteni uchytného sroubu
+            translate([0,0,(vyska_pod_magnetem-vyska_hlavy_sroubu-1)/2+0.1])
+                cylinder (h = vyska_hlavy_sroubu+1, r=((prumer_hlavy_sroubu+0.2)/2), center = true, $fn=100);
+        //otvor pro sroub
+            cylinder (h = vyska_pod_magnetem+magnet_zapusteni+0.1, r=(prumer_sroubu)/2, center = true, $fn=100);
+        }
+    }
+//WINDGAUGE02A_R03(R03_sila_materialu,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,R01_sila_materialu_pro_prekriti,R02_sila_mateiralu_pod_lopatkami,S01_sila_materialu);

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
16,8 → 16,12
{
cylinder (h = S01_vyska_zuzene_casti, r=(R02_vzdalenost_mezi_uchyty_lopatek+2L01_sila_zapusteni_drzaku+2L01_hloubka_zapusteni+2vule_mezi_statorem_rotorem+2S01_sila_materialu)/2, center = true, $fn=100);


cylinder (h = S01_vyska_zuzene_casti+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2L01_sila_zapusteni_drzaku+2L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100);
translate([0,0,S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko])

screw_thread((R02_vzdalenost_mezi_uchyty_lopatek+2L01_sila_zapusteni_drzaku+2L01_hloubka_zapusteni+2vule_mezi_statorem_rotorem+2S01_sila_materialu),S01_hloubka_zavitu,55,S01_vyska_zuzene_casti+0.01,PI/2,2);

translate([0,0,-(S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko)/2])
cylinder (h = S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2L01_sila_zapusteni_drzaku+2L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100);


//translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2])

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad
 ,55 → 6,79
 PI=3.141592;
-module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka)
+module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit)
     {
+union()
+  {
+//valec se zavitem
 difference()
         {
-//translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2-10])
-//metric_thread (diameter=S01_prumer_zavitu-0.3, pitch=1, length=S01_vyska_komponentu_na_lozisko, internal=false, n_starts=6);
+ screw_thread(S01_prumer_zavitu-S01_tolerance_zavit,S01_hloubka_zavitu,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
+ translate([0,0,S01_sila_materialu+S01_vyska_komponentu_na_lozisko/2])
+    cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=((S01_prumer_zavitu-S01_sila_materialu)-S01_tolerance_zavit)/2-S01_hloubka_zavitu/2, center = true, $fn=100);
- screw_thread(S01_prumer_zavitu-2.5,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
-//otvory na ložisko
-translate([0,0,lozisko_vyska/2])
- cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
- translate([0,0,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
-//otvor na šroub 1
-translate([-senzor_delka/2,-senzor_sirka/2,vyska_matky/2])
- cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
+  //otvor na pruchod hridelky
+  translate([0,0,S01_sila_materialu/2])
+  cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
+  //otvor na šroub 1
  translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
   cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
-//otvor na šroub 2
-translate([senzor_delka/2,-senzor_sirka/2,vyska_matky/2])
- cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
+//otvor na šroub 2
  translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
   cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
 //otvor na šroub 3
-translate([senzor_delka/2,senzor_sirka/2,vyska_matky/2])
- cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
  translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
   cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
 //otvor na šroub 4
-translate([-senzor_delka/2,senzor_sirka/2,vyska_matky/2])
- cylinder (h = vyska_matky+0.01, r=(prumer_orechu+0.2)/2, center = true, $fn=100);
  translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+            }
+//otvory na ložisko
+translate([0,0,lozisko_vyska/2+S01_sila_materialu])
+   difference()
+  {
+ cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
+ cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
+}
+  }
  }
-    }
 ,4 → 86,4
-WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka);
+WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit);

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S03.scad
 ,60 → 6,39
 PI=3.141592;
-module WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu)
+module WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu,S01_tolerance_zavit,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,S01_sila_materialu,S01_hloubka_zavitu)
     {
+union()
+  {
+//valec se zavitem
 difference()
         {
-//translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2-10])
-//metric_thread (diameter=S01_prumer_zavitu-0.3, pitch=1, length=S01_vyska_komponentu_na_lozisko, internal=false, n_starts=6);
+ screw_thread((R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)-S01_tolerance_zavit,S01_hloubka_zavitu,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
+ translate([0,0,S01_sila_materialu+S01_vyska_komponentu_na_lozisko/2])
+    cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=((R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)-S01_tolerance_zavit/2)/2-S01_hloubka_zavitu/2-S01_sila_materialu, center = true, $fn=100);
- screw_thread(S01_prumer_zavitu-0.5,4,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
+  //otvor na pruchod hridelky
+  translate([0,0,S01_sila_materialu/2])
+  cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
+            }
 //otvory na ložisko
-translate([0,0,lozisko_vyska/2])
+translate([0,0,lozisko_vyska/2+S01_sila_materialu])
+   difference()
+  {
+ cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
  cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
- translate([0,0,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(lozisko_prumer_vnitrni+2*lozisko_prekryv+0.2)/2, center = true, $fn=100);
-//otvor na šroub 1
-translate([-senzor_delka/2,-senzor_sirka/2,vyska_hlavy_sroubu/2])
- cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
- translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
-//otvor na šroub 2
-translate([senzor_delka/2,-senzor_sirka/2,vyska_hlavy_sroubu/2])
- cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
- translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
-//otvor na šroub 3
-translate([senzor_delka/2,senzor_sirka/2,vyska_hlavy_sroubu/2])
- cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
- translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+}
+  }
+}
-//otvor na šroub 4
-translate([-senzor_delka/2,senzor_sirka/2,vyska_hlavy_sroubu/2])
- cylinder (h = vyska_hlavy_sroubu+0.01, r=(prumer_hlavy_sroubu+0.2)/2, center = true, $fn=100);
- translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
- }
-    }
- WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu);
+ WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu,S01_tolerance_zavit,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,S01_sila_materialu,S01_hloubka_zavitu);

/Modules/Mechanical/WINDGAUGE02A/CAD/configuration.scad
8,7 → 8,7
prumer_osicky=3;
prumer_pomocne_trubicky=8;
zapusteni_pomocne_trubicky=3;
vule_mezi_statorem_rotorem=2; //vůle mezi statorem a rotorem + sila materialu statoru
vule_mezi_statorem_rotorem=3; //vůle mezi statorem a rotorem + sila materialu statoru

//rozmery modulu se senzorem
senzor_delka=20.32;
21,7 → 21,14
lozisko_vyska=5;
lozisko_prekryv=1.5;

//magnet
magnet_prumer=6.3;
magnet_vyska=5;
magnet_zapusteni=2;
vyska_pod_magnetem=5;
magnet_tolerance_prumeru=0.2;


//parametry sroubu
prumer_sroubu=3.2;
prumer_hlavy_sroubu=6;
84,12 → 91,14


//WINDGAUGE02A_S01 //stator
S01_sila_materialu=2;
S01_sila_materialu=1.3;
S01_vyska_zuzene_casti=20;
S01_vyska_komponentu_na_lozisko=7;
S01_vyska_zavitu_na_nasroubovani_drzaku=15;
S01_vyska_na_elektroniku=50;
S01_prumer_zavitu=70;
S01_vyska_na_elektroniku=35;
S01_prumer_zavitu=64;
S01_tolerance_zavit=1.5;
S01_hloubka_zavitu=4;
S01_vyska_prechodu=20;

Subversion Repositories – MLAB

/Modules/Mechanical @ 4452 → /Modules/Mechanical @ 4462

Compare Path:	Rev
With Path:	Rev