| 3,7 → 3,7 |
|---|
| |
| #FUSES NOWDT //No Watch Dog Timer |
| #FUSES WDT128 //Watch Dog Timer uses 1:128 Postscale |
| #FUSES HS //High speed Osc (> 4mhz for PCM/PCH) (>10mhz for PCD) |
| #FUSES INTRC_IO //Internal RC Osc, no CLKOUT |
| #FUSES NOPROTECT //Code not protected from reading |
| #FUSES NOBROWNOUT //No brownout reset |
| #FUSES BORV20 //Brownout reset at 2.0V |
| 25,11 → 25,11 |
|---|
| #FUSES MCLR //Master Clear pin enabled |
| #FUSES LPT1OSC //Timer1 configured for low-power operation |
| #FUSES NOXINST //Extended set extension and Indexed Addressing mode disabled (Legacy mode) |
| #FUSES PLL6 //Divide By 12(48MHz oscillator input) |
| #FUSES CPUDIV1 //System Clock by 4 |
| #FUSES PLL12 //Divide By 12(48MHz oscillator input) |
| #FUSES CPUDIV1 //System Clock by 1 |
| #FUSES USBDIV //USB clock source comes from PLL divide by 2 |
| #FUSES VREGEN //USB voltage regulator enabled |
| #FUSES ICPRT //ICPRT enabled |
| |
| #use delay(clock=20000000) |
| #use delay(clock=8000000) |
| |