Problem with comparison.
/Modules/PowerSW/TRIACSHARP02A/CAD/TRIACSHARP02A_pedestal.scad |
---|
0,0 → 1,61 |
pedestal_height = 5; // designed for use the MLAB standard 12mm screws. |
mount_hole = 3.5; |
clear = 0.175; |
nut_size = 6.6; |
difference () { |
cube([50.292,70.612,pedestal_height]); |
translate ([1, 2, 2.5]) |
difference(){ |
cube([47.292,66.612,pedestal_height]); |
cube([8,8,pedestal_height]); |
translate ([47.292 - 8, 0, 0]) |
cube([8,8,pedestal_height]); |
translate ([47.292 - 8, 66.612 - 8, 0]) |
cube([8,8,pedestal_height]); |
translate ([0, 66.612 - 8, 0]) |
cube([8,8,pedestal_height]); |
//insulating wall |
translate ([20, 0, 0]) |
cube([1,70,pedestal_height]); |
translate ([22, 0, 0]) |
cube([1,70,pedestal_height]); |
} |
//////////////////////////////////////// |
// MLAB grid holes |
translate ([4.572, 4.572,0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([4.572, 4.572, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.572 + 4*10.16, 4.572,0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([4.572 + 4*10.16, 4.572, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.572, 4.572 + 6*10.16, 0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([4.572, 4.572 + 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
translate ([4.572 + 4*10.16, 4.572 + 6*10.16, 0]) |
cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
translate ([4.572 + 4*10.16, 4.572 + 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
} |