| 0,0 → 1,54 |
|---|
| |
| pedestal_height = 5; // designed for use the MLAB standard 12mm screws. |
| mount_hole = 3.5; |
| clear = 0.175; |
| nut_size = 6.6; |
| |
| |
| difference () { |
| cube([50.292,70.612,pedestal_height]); |
| |
| translate ([1, 1,2.5]) |
| difference(){ |
| cube([48.292,68.612,pedestal_height]); |
| |
| cube([8,8,pedestal_height]); |
| |
| translate ([48.292 - 8, 0, 0]) |
| cube([8,8,pedestal_height]); |
| |
| translate ([48.292 - 8, 68.612 - 8, 0]) |
| cube([8,8,pedestal_height]); |
| |
| translate ([0, 68.612 - 8, 0]) |
| cube([8,8,pedestal_height]); |
| } |
| |
| //////////////////////////////////////// |
| |
| // MLAB grid holes |
| |
| translate ([4.572, 4.572,0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572, 4.572, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| translate ([4.572 + 4*10.16, 4.572,0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572 + 4*10.16, 4.572, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| |
| translate ([4.572, 4.572 + 6*10.16, 0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572, 4.572 + 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| translate ([4.572 + 4*10.16, 4.572 + 6*10.16, 0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572 + 4*10.16, 4.572 + 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| } |
| |
| |