| 3,30 → 3,33 |
|---|
| mount_hole = 3.5; |
| clear = 0.175; |
| nut_size = 6.6; |
| mil = 25.4/1000; |
| MLAB_grid = 400*mil; |
| |
| |
| difference () { |
| translate ([-190*mil, -190*mil, 0]) |
| cube([50.292,70.612,pedestal_height]); |
| |
| translate ([1, 2, 2.5]) |
| difference(){ |
| cube([47.292,66.612,pedestal_height]); |
| translate ([-190*mil + 1.5, -190*mil + 2, 2.5]) |
| cube([46.792,66.612,pedestal_height]); |
| |
| cube([8,8,pedestal_height]); |
| translate ([-190*mil, -190*mil, 0]) |
| cube([MLAB_grid -10*mil,MLAB_grid -10*mil,pedestal_height]); |
| |
| translate ([47.292 - 8, 0, 0]) |
| cube([8,8,pedestal_height]); |
| translate ([4*MLAB_grid - 190*mil, -190*mil, 0]) |
| cube([MLAB_grid -10*mil ,MLAB_grid -10*mil,pedestal_height]); |
| |
| translate ([47.292 - 8, 66.612 - 8, 0]) |
| cube([8,8,pedestal_height]); |
| translate ([4*MLAB_grid - 190*mil, 6*MLAB_grid -190*mil, 0]) |
| cube([MLAB_grid -10*mil ,MLAB_grid -10*mil,pedestal_height]); |
| |
| translate ([0, 66.612 - 8, 0]) |
| cube([8,8,pedestal_height]); |
| translate ([-190*mil, 6*MLAB_grid -190*mil, 0]) |
| cube([MLAB_grid-10*mil,MLAB_grid-10*mil ,pedestal_height]); |
| |
| //insulating wall |
| translate ([20, 0, 0]) |
| translate ([20-190*mil, -190*mil, 0]) |
| cube([1,70,pedestal_height]); |
| translate ([22, 0, 0]) |
| translate ([22-190*mil, -190*mil, 0]) |
| cube([1,70,pedestal_height]); |
| |
| } |
| 35,25 → 38,25 |
|---|
| |
| // MLAB grid holes |
| |
| translate ([4.572, 4.572,0]) |
| translate ([0, 0, 0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572, 4.572, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| translate ([0, 0, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| translate ([4.572 + 4*10.16, 4.572,0]) |
| translate ([4*MLAB_grid, 0, 0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572 + 4*10.16, 4.572, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| translate ([4*MLAB_grid, 0, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| |
| translate ([4.572, 4.572 + 6*10.16, 0]) |
| translate ([0, 6*MLAB_grid, 0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572, 4.572 + 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| translate ([0, 6*MLAB_grid, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| translate ([4.572 + 4*10.16, 4.572 + 6*10.16, 0]) |
| translate ([4*MLAB_grid, 6*10.16, 0]) |
| cylinder (h = 3, r= (nut_size+clear)/2, $fn=6); |
| translate ([4.572 + 4*10.16, 4.572 + 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| translate ([4*MLAB_grid, 6*10.16, 3.2]) // one solid layer for slicer (the holes will be pierced on demand ) |
| cylinder (h = pedestal_height, r= mount_hole/2, $fn=10); |
| |
| } |