| 0,0 → 1,56 |
|---|
| Generated by EAGLE CAM Processor 6.4.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/PowerSupply/BATPOWER04A/SCH&PCB/bot.gpi |
| |
| Date : 26.8.2013 14:20:04 |
| Plotfile : D:/Honza/MLAB/Modules/PowerSupply/BATPOWER04A/SCH&PCB/bot.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0030inch 37 |
| D11 rectangle 0.0350inch x 0.0165inch 8 |
| D12 square 0.0650inch 28 |
| D13 rectangle 0.1004inch x 0.0984inch 6 |
| D14 rectangle 0.0512inch x 0.0591inch 2 |
| D15 rectangle 0.0591inch x 0.0512inch 16 |
| D16 rectangle 0.2165inch x 0.1181inch 2 |
| D17 square 0.0700inch 3 |
| D18 rectangle 0.0394inch x 0.0551inch 3 |
| D19 rectangle 0.0669inch x 0.0709inch 2 |
| D20 rectangle 0.0709inch x 0.0669inch 2 |
| D21 round 0.2540inch 4 |
| D22 square 0.1500inch 8 |
| D23 draw 0.0160inch 2015 |
| D24 draw 0.0660inch 44 |
| D25 draw 0.0560inch 6 |
| D26 draw 0.0320inch 1 |
| D27 draw 0.0240inch 7 |
| D28 round 0.0357inch 98 |
| D29 draw 0.0400inch 26 |
| |