| 0,0 → 1,48 |
|---|
| Generated by EAGLE CAM Processor 6.4.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/PowerSupply/BATPOWER04B/SCH&PCB/smb.gpi |
| |
| Date : 15.12.2013 10:12:35 |
| Plotfile : D:/Honza/MLAB/Modules/PowerSupply/BATPOWER04B/SCH&PCB/smb.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 rectangle 0.0430inch x 0.0245inch 8 |
| D11 square 0.0730inch 28 |
| D12 rectangle 0.1084inch x 0.1064inch 6 |
| D13 rectangle 0.0470inch x 0.0590inch 6 |
| D14 rectangle 0.2245inch x 0.1261inch 2 |
| D15 rectangle 0.0590inch x 0.0470inch 12 |
| D16 rectangle 0.0749inch x 0.0789inch 2 |
| D17 rectangle 0.0789inch x 0.0749inch 2 |
| D18 round 0.2620inch 4 |
| D19 square 0.1580inch 8 |
| D20 rectangle 0.0860inch x 0.0300inch 8 |
| D21 round 0.0940inch 3 |
| |