| 0,0 → 1,63 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/PowerSupply/LION1CELL01A/SCH_PCB/smb.gpi |
| |
| Date : 19.3.2013 16:29:31 |
| Plotfile : D:/Honza/MLAB/Modules/PowerSupply/LION1CELL01A/SCH_PCB/smb.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 rectangle 0.0384inch x 0.0128inch 4 |
| D11 rectangle 0.1220inch x 0.0827inch 1 |
| D12 draw 0.0055inch 80 |
| D13 rectangle 0.0079inch x 0.0287inch 16 |
| D14 rectangle 0.0287inch x 0.0079inch 4 |
| D15 square 0.0730inch 30 |
| D16 rectangle 0.2245inch x 0.1261inch 2 |
| D17 square 0.1655inch 4 |
| D18 round 0.2620inch 6 |
| D19 square 0.1582inch 3 |
| D20 rectangle 0.1080inch x 0.0580inch 2 |
| D21 rectangle 0.0592inch x 0.0671inch 30 |
| D22 rectangle 0.0671inch x 0.0592inch 38 |
| D23 square 0.1025inch 2 |
| D24 rectangle 0.0671inch x 0.0493inch 16 |
| D25 round 0.1143inch 8 |
| D26 rectangle 0.0580inch x 0.1080inch 2 |
| D27 rectangle 0.0434inch x 0.0218inch 14 |
| D28 rectangle 0.0300inch x 0.0860inch 14 |
| D29 square 0.0740inch 4 |
| D30 rectangle 0.0474inch x 0.0631inch 3 |
| D31 rectangle 0.0867inch x 0.1332inch 2 |
| D32 rectangle 0.0356inch x 0.0198inch 6 |
| D33 rectangle 0.0474inch x 0.0710inch 1 |
| D34 rectangle 0.1419inch x 0.0828inch 2 |
| D35 square 0.1580inch 4 |
| D36 rectangle 0.0631inch x 0.0789inch 2 |
| |