| 0,0 → 1,153 |
|---|
| |
| #include "main.h" |
| #define EEPROM_SDA PIN_C4 |
| #define EEPROM_SCL PIN_C3 |
| #use i2c(master, sda=EEPROM_SDA, scl=EEPROM_SCL) |
| #use rs232(baud=9600,parity=N,xmit=PIN_C7,rcv=PIN_C6,bits=8) //rcv TXD xmit RXD |
| |
| |
| void main() |
| { |
| |
| setup_adc_ports(NO_ANALOGS|VSS_VDD); |
| setup_adc(ADC_CLOCK_DIV_2); |
| setup_spi(SPI_SS_DISABLED); |
| setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
| setup_timer_1(T1_DISABLED); |
| setup_timer_2(T2_DISABLED,0,1); |
| setup_ccp1(CCP_OFF); |
| setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
| |
| printf("Simple Thermomether \r\n",); |
| unsigned int8 STAV1,STAV2; |
| |
| unsigned int16 SOUCET, SOUCET1; |
| unsigned int8 LSB=0,ZK,k=0; |
| //unsigned int8 |
| |
| while(TRUE) |
| { |
| |
| |
| |
| |
| i2c_start(); //blockdatacontrol |
| I2C_Write(0xAA); |
| I2C_write(0x61); |
| i2c_start(); |
| I2C_Write(0xAA); |
| i2c_write(0x00); |
| i2c_stop(); |
| delay_ms (1); |
| |
| |
| i2c_start();//dataflashclass |
| I2C_Write(0xAA); |
| I2C_write(0x3e); |
| |
| i2c_start(); |
| I2C_Write(0xAA); |
| i2c_write(0x40); |
| i2c_stop(); |
| delay_ms (1); |
| |
| |
| i2c_start();//dataflashblock |
| I2C_Write(0xAA); |
| I2C_write(0x3f); |
| |
| i2c_start(); |
| I2C_Write(0xAA); |
| I2C_write(0x00); |
| i2c_stop(); |
| |
| delay_ms (1); |
| |
| i2c_start();//blockdata |
| I2C_Write(0xAA); |
| I2C_write(0x44); |
| |
| i2c_start(); |
| I2C_Write(0xAB); |
| ZK=I2C_read(0); |
| i2c_stop(); |
| |
| delay_ms (1); |
| |
| printf("LED %lX \r\n", ZK); |
| |
| if(ZK==0x73) |
| { |
| LSB=LSB-1; |
| printf("Vysledne LSB %lX \r\n", LSB); |
| while(TRUE) |
| { |
| } |
| } |
| |
| else |
| { |
| i2c_start();//blockdata |
| I2C_Write(0xAA); |
| I2C_write(0x44); |
| |
| i2c_start(); |
| I2C_Write(0xAA); |
| I2C_write(0x73); //pro 5LED 0x53 pro 7led 0x73 |
| i2c_stop(); |
| |
| |
| int i=64; |
| SOUCET=0; |
| SOUCET1=0; |
| |
| /* |
| for (i=64;i<96;++i) |
| { |
| printf("%u\r\n",i); |
| i2c_stop(); |
| |
| i2c_start();//blockdata |
| I2C_Write(0xAA); |
| I2C_write(i); |
| |
| i2c_start(); |
| I2C_Write(0xAB); |
| STAV1=I2C_read(0); |
| i2c_stop(); |
| |
| printf("STAV %lX \r\n", STAV1); |
| SOUCET=SOUCET+STAV1; |
| |
| |
| |
| |
| |
| } |
| printf("SOUCET: %lX (procenta)\r\n", SOUCET); |
| SOUCET1=SOUCET; |
| SOUCET1=SOUCET1>>8; |
| printf("Deleno 256: %lX (procenta)\r\n", SOUCET1); |
| SOUCET1=SOUCET-SOUCET1; |
| printf("Soucet - soucet/256: %lX \r\n", SOUCET1); |
| LSB=(unsigned int8)SOUCET1; |
| printf("LSB: %lX\r\n", LSB); |
| //printf("Stav: %X (procenta)\r\n", STAV2); |
| */ |
| |
| i2c_start();//blockdata |
| I2C_Write(0xAA); |
| I2C_write(0x60); |
| |
| i2c_start(); |
| I2C_Write(0xAA); |
| I2C_write(LSB); |
| i2c_stop(); |
| |
| } |
| |
| LSB=LSB+1; |
| |
| delay_ms (100); |
| } |
| } |