| 0,0 → 1,52 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/PowerSupply/SOLARMINI01A/CAM_PROFI/T2.gpi |
| |
| Date : 22.4.2013 22:03:04 |
| Plotfile : D:/Honza/MLAB/Modules/PowerSupply/SOLARMINI01A/CAM_PROFI/T2.PHO |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : no |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0051inch 34 |
| D11 draw 0.0110inch 60 |
| D12 draw 0.0080inch 8 |
| D13 round 0.0256inch 1 |
| D14 draw 0.0040inch 251 |
| D15 draw 0.0050inch 38 |
| D16 rectangle 0.0295inch x 0.0571inch 4 |
| D17 rectangle 0.0571inch x 0.0295inch 2 |
| D18 draw 0.0060inch 16 |
| D19 rectangle 0.0256inch x 0.0551inch 4 |
| D20 rectangle 0.0551inch x 0.0256inch 8 |
| D21 rectangle 0.0860inch x 0.0210inch 2 |
| D22 rectangle 0.0690inch x 0.0290inch 4 |
| D23 rectangle 0.0500inch x 0.0313inch 2 |
| D24 rectangle 0.0875inch x 0.0125inch 2 |
| D25 rectangle 0.1125inch x 0.0312inch 1 |
| |