WebSVN – MLAB – /Modules/PowerSupply/THERMOGEN01A/CAD/src Rev 4142 and /Modules/PowerSupply/THERMOGEN01A/CAD/src Rev 4143 – Path Comparison

 /Modules/PowerSupply/THERMOGEN01A/CAD/src/THERMOGEN_heat_reservoir.scad
 ,97 → 15,108
 height = heatsink_zsize + TEG_zsize+volume_encore;
+module box () {
-difference () {
-    union (){
-        cube([heatsink_xsize+2*wall_thickness+volume_encore,heatsink_ysize+2*wall_thickness+volume_encore,height]);          // overal plastic brick
-//            cube([heatsink_xsize+2*wall_thickness,heatsink_ysize+2*wall_thickness,heatsink_zsize+wall_thickness]);          // overal plastic brick
-    }
+    difference () {
+        union (){
+            cube([heatsink_xsize+2*wall_thickness+volume_encore,heatsink_ysize+2*wall_thickness+volume_encore,height]);          // overal plastic brick
+    //            cube([heatsink_xsize+2*wall_thickness,heatsink_ysize+2*wall_thickness,heatsink_zsize+wall_thickness]);          // overal plastic brick
+        }
-    translate ([wall_thickness-clearance+volume_encore/2, wall_thickness-clearance+volume_encore/2, TEG_zsize-clearance])
-        cube([heatsink_xsize+2*clearance, heatsink_ysize+2*clearance, heatsink_xsize+2*clearance]);          // hollow for heat sink
-    translate ([wall_thickness, wall_thickness, TEG_zsize+heatsink_thickness])
-        cube([heatsink_xsize+2*clearance+volume_encore, heatsink_ysize+2*clearance+volume_encore, heatsink_xsize+2*clearance+volume_encore]);          // hollow for heat storage liquid.
+        translate ([wall_thickness-clearance+volume_encore/2, wall_thickness-clearance+volume_encore/2, TEG_zsize-clearance])
+            cube([heatsink_xsize+2*clearance, heatsink_ysize+2*clearance, heatsink_xsize+2*clearance]);          // hollow for heat sink
+        translate ([wall_thickness, wall_thickness, TEG_zsize+heatsink_thickness])
+            cube([heatsink_xsize+2*clearance+volume_encore, heatsink_ysize+2*clearance+volume_encore, heatsink_xsize+2*clearance+volume_encore]);          // hollow for heat storage liquid.
-    translate ([((heatsink_xsize+2*wall_thickness+volume_encore)-TEG_xsize)/2 - clearance, ((heatsink_ysize+2*wall_thickness+volume_encore)-TEG_ysize)/2 - clearance, 0])
-        cube([TEG_xsize+2*clearance, TEG_ysize+2*clearance, wall_thickness]);          // hollow for the thermoelectric generator
+        translate ([((heatsink_xsize+2*wall_thickness+volume_encore)-TEG_xsize)/2 - clearance, ((heatsink_ysize+2*wall_thickness+volume_encore)-TEG_ysize)/2 - clearance, 0])
+            cube([TEG_xsize+2*clearance, TEG_ysize+2*clearance, wall_thickness]);          // hollow for the thermoelectric generator
-    translate ([((heatsink_xsize+2*wall_thickness+volume_encore)-TEG_xsize)/2, 0, 0])
-        cube([4, wall_thickness+volume_encore, TEG_zsize-1]);          // hollow for the thermoelectric generator
-    translate ([((heatsink_xsize+2*wall_thickness+volume_encore)-TEG_xsize)/2 +TEG_xsize-4, 0, 0])
-        cube([4, wall_thickness+volume_encore, TEG_zsize-1]);          // hollow for the thermoelectric generator
-    translate ([wall_thickness, wall_thickness, height-sealing_ring_width])
-    union () {
-        difference () {
-            minkowski() {
-                cube([heatsink_xsize+volume_encore, heatsink_xsize+volume_encore, sealing_ring_width]);          // Rib for o-ring.
-                cylinder(r=wall_thickness/2,h=0.1);
-            }
+        translate ([((heatsink_xsize+2*wall_thickness+volume_encore)-TEG_xsize)/2, 0, 0])
+            cube([4, wall_thickness+volume_encore, TEG_zsize-1]);          // hollow for the thermoelectric generator
+        translate ([((heatsink_xsize+2*wall_thickness+volume_encore)-TEG_xsize)/2 +TEG_xsize-4, 0, 0])
+            cube([4, wall_thickness+volume_encore, TEG_zsize-1]);          // hollow for the thermoelectric generator
+        translate ([wall_thickness, wall_thickness, height-sealing_ring_width])
+        union () {
+            difference () {
+                minkowski() {
+                    cube([heatsink_xsize+volume_encore, heatsink_xsize+volume_encore, sealing_ring_width]);          // Rib for o-ring.
+                    cylinder(r=wall_thickness/2,h=0.1);
+                }
-            translate ([sealing_ring_width/2, sealing_ring_width/2, 0])
-            minkowski() {
-                cube([heatsink_xsize-sealing_ring_width+volume_encore, heatsink_ysize-sealing_ring_width+volume_encore, sealing_ring_width]);          // Rib for o-ring.
-                cylinder(r=wall_thickness/2,h=0.1);
+                translate ([sealing_ring_width/2, sealing_ring_width/2, 0])
+                minkowski() {
+                    cube([heatsink_xsize-sealing_ring_width+volume_encore, heatsink_ysize-sealing_ring_width+volume_encore, sealing_ring_width]);          // Rib for o-ring.
+                    cylinder(r=wall_thickness/2,h=0.1);
+                }
             }
         }
-    }
-    translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, heatsink_xsize+2*wall_thickness+volume_encore-wall_thickness/3, height-wall_thickness/2])
-    {
-            translate([-6, -3, -1.5])
-            cube([wall_thickness, 6, 3], center = false); // hole for top part mounting nut
-            cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
-    }
+        translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, heatsink_xsize+2*wall_thickness+volume_encore-wall_thickness/3, height-wall_thickness/2])
+        {
+                translate([-4, -3, -1.5])
+                cube([wall_thickness, 6, 3], center = false); // hole for top part mounting nut
+                translate([0, 0, 1.8])
+                cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+        }
-    translate ([wall_thickness/3, wall_thickness/3, height-wall_thickness/2])
-    {
-            translate([-6, 0, -1.5])
-            cube([wall_thickness-3, 6, 3], center = true); // hole for top part mounting nut
-            cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
-    }
-    translate ([wall_thickness/3, heatsink_xsize+2*wall_thickness+volume_encore-wall_thickness/3, height-wall_thickness/2])
-    {
-            translate([-6, 0, -1.5])
-            cube([wall_thickness-3, 6, 3], center = true); // hole for top part mounting nut
-            cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
-    }
+        translate ([wall_thickness/3, wall_thickness/3, height-wall_thickness/2])
+        {
+                translate([-8, -3, -1.5])
+                cube([wall_thickness, 6, 3], center = false); // hole for top part mounting nut
+                translate([0, 0, 1.8])
+                cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+        }
+        translate ([wall_thickness/3, heatsink_xsize+2*wall_thickness+volume_encore-wall_thickness/3, height-wall_thickness/2])
+        {
+                translate([-8, -3, -1.5])
+                cube([wall_thickness, 6, 3], center = false); // hole for top part mounting nut
+                translate([0, 0, 1.8])
+                cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+        }
-    translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, wall_thickness/3,height-wall_thickness/2])
-    {
-            translate([6, 0, -1.5])
-            cube([wall_thickness-3, 6, 3], center = true); // hole for top part mounting nut
-            cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+        translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, wall_thickness/3,height-wall_thickness/2])
+        {
+                translate([-4, -3, -1.5])
+                cube([wall_thickness, 6, 3], center = false); // hole for top part mounting nut
+                translate([0, 0, 1.8])
+                cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+        }
     }
 }
 // Heat reservoir cover
-translate ([0, 0, 3*height])
-{
-        difference () {
+module cover (){
+    translate ([0, 0, 3*height])
+    {
+            difference () {
-            cube([heatsink_xsize+2*wall_thickness+volume_encore,heatsink_ysize+2*wall_thickness+volume_encore,wall_thickness]);
-            translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, wall_thickness/3,0])
-            {
-                    cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+                cube([heatsink_xsize+2*wall_thickness+volume_encore,heatsink_ysize+2*wall_thickness+volume_encore,wall_thickness]);
+                translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, wall_thickness/3,0])
+                {
+                        cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+                }
+                translate ([wall_thickness/3, wall_thickness/3,0])
+                {
+                        cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+                }
+                translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, heatsink_ysize+2*wall_thickness-wall_thickness/3+volume_encore,0])
+                {
+                        cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+                }
+                translate ([wall_thickness/3, heatsink_ysize+2*wall_thickness-wall_thickness/3+volume_encore,0])
+                {
+                        cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
+                }
             }
-            translate ([wall_thickness/3, wall_thickness/3,0])
-            {
-                    cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
-            }
-            translate ([ heatsink_xsize+2*wall_thickness-wall_thickness/3+volume_encore, heatsink_ysize+2*wall_thickness-wall_thickness/3+volume_encore,0])
-            {
-                    cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
-            }
-            translate ([wall_thickness/3, heatsink_ysize+2*wall_thickness-wall_thickness/3+volume_encore,0])
-            {
-                    cylinder (h = wall_thickness, r= mount_hole/2, $fn=20); // hole for top part mounting screw.
-            }
-        }
+    }
 }
+cover ();

/Modules/PowerSupply/THERMOGEN01A/CAD/src/config.ini
1,9 → 1,9
# generated by Slic3r 1.2.8 on Tue Jun 16 17:54:14 2015
avoid_crossing_perimeters = 0
# generated by Slic3r 1.2.8 on Thu Jun 18 01:43:16 2015
avoid_crossing_perimeters = 1
bed_shape = 0x0,180x0,180x180,0x180
bed_temperature = 50
before_layer_gcode =
bottom_solid_layers = 3
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_fan_speed = 100
bridge_flow_ratio = 1
32,7 → 32,7
filament_colour = #FFFFFF
filament_diameter = 1.75
fill_angle = 45
fill_density = 20%
fill_density = 15%
fill_pattern = concentric
first_layer_acceleration = 500
first_layer_bed_temperature = 60
93,7 → 93,7
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_every_layers = 35
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 55

Subversion Repositories – MLAB

/Modules/PowerSupply/THERMOGEN01A/CAD/src @ 4142 → /Modules/PowerSupply/THERMOGEN01A/CAD/src @ 4143

Compare Path:	Rev
With Path:	Rev