| 0,0 → 1,57 |
|---|
| Generated by EAGLE CAM Processor 6.4.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/PowerSupply/TPS63060V01A/SCH&PCB/bot.gpi |
| |
| Date : 15.12.2013 17:04:00 |
| Plotfile : D:/Honza/MLAB/Modules/PowerSupply/TPS63060V01A/SCH&PCB/bot.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0040inch 65 |
| D11 rectangle 0.0510inch x 0.0390inch 12 |
| D12 square 0.0650inch 25 |
| D13 rectangle 0.1000inch x 0.0550inch 2 |
| D14 rectangle 0.0394inch x 0.0551inch 3 |
| D15 rectangle 0.1339inch x 0.0748inch 2 |
| D16 rectangle 0.0709inch x 0.0669inch 2 |
| D17 round 0.2540inch 4 |
| D18 rectangle 0.0390inch x 0.0510inch 6 |
| D19 rectangle 0.0850inch x 0.1000inch 2 |
| D20 rectangle 0.0335inch x 0.0110inch 10 |
| D21 rectangle 0.0669inch x 0.0846inch 1 |
| D22 rectangle 0.0098inch x 0.0276inch 8 |
| D23 round 0.0318inch 5 |
| D24 rectangle 0.1181inch x 0.2165inch 2 |
| D25 square 0.1500inch 4 |
| D26 draw 0.0120inch 2588 |
| D27 round 0.0357inch 76 |
| D28 draw 0.0100inch 533 |
| D29 draw 0.0320inch 8 |
| D30 draw 0.0760inch 1 |
| |