0,0 → 1,48 |
Generated by EAGLE CAM Processor 6.1.0 |
|
Photoplotter Info File: D:/MLAB_E/Modules/PowerSupply/UNIPOWER02A/CAM_PROFI/M2.gpi |
|
Date : 26.4.2012 0:28:44 |
Plotfile : D:/MLAB_E/Modules/PowerSupply/UNIPOWER02A/CAM_PROFI/M2.PHO |
Apertures : generated: |
Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
|
Parameter settings: |
|
Emulate Apertures : no |
Tolerance Draw + : 0.00 % |
Tolerance Draw - : 0.00 % |
Tolerance Flash + : 0.00 % |
Tolerance Flash - : 0.00 % |
Rotate : no |
Mirror : no |
Optimize : yes |
Auto fit : yes |
OffsetX : 0inch |
OffsetY : 0inch |
|
Plotfile Info: |
|
Coordinate Format : 2.4 |
Coordinate Units : Inch |
Data Mode : Absolute |
Zero Suppression : None |
End Of Block : * |
|
Apertures used: |
|
Code Shape Size used |
|
D10 rectangle 0.1459inch x 0.0868inch 2 |
D11 square 0.1620inch 8 |
D12 round 0.0820inch 1 |
D13 square 0.0820inch 1 |
D14 rectangle 0.0789inch x 0.0829inch 2 |
D15 rectangle 0.0632inch x 0.0711inch 2 |
D16 square 0.1774inch 3 |
D17 round 0.2660inch 4 |
D18 square 0.0770inch 18 |
D19 rectangle 0.0711inch x 0.0632inch 6 |
D20 rectangle 0.1301inch x 0.0396inch 1 |
D21 square 0.1301inch 3 |
|