Problem with comparison.
/Modules/Sensors/IMU01A/CAM_PROFI/smb.gpi |
---|
0,0 → 1,45 |
Generated by EAGLE CAM Processor 6.1.0 |
Photoplotter Info File: D:/Honza/MLAB/Modules/Sensors/IMU01A/SCH_PCB/smb.gpi |
Date : 19.3.2013 16:08:29 |
Plotfile : D:/Honza/MLAB/Modules/Sensors/IMU01A/SCH_PCB/smb.gbr |
Apertures : generated: |
Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
Parameter settings: |
Emulate Apertures : no |
Tolerance Draw + : 0.00 % |
Tolerance Draw - : 0.00 % |
Tolerance Flash + : 0.00 % |
Tolerance Flash - : 0.00 % |
Rotate : no |
Mirror : no |
Optimize : yes |
Auto fit : yes |
OffsetX : 0inch |
OffsetY : 0inch |
Plotfile Info: |
Coordinate Format : 2.4 |
Coordinate Units : Inch |
Data Mode : Absolute |
Zero Suppression : None |
End Of Block : * |
Apertures used: |
Code Shape Size used |
D10 rectangle 0.0420inch x 0.0200inch 10 |
D11 rectangle 0.0200inch x 0.0420inch 6 |
D12 rectangle 0.0474inch x 0.0218inch 8 |
D13 rectangle 0.0218inch x 0.0474inch 8 |
D14 rectangle 0.0671inch x 0.0592inch 20 |
D15 square 0.0730inch 28 |
D16 rectangle 0.0592inch x 0.0671inch 8 |
D17 round 0.2620inch 4 |
D18 rectangle 0.0749inch x 0.0789inch 2 |