Problem with comparison.
/Modules/Sensors/LTS01A/SW/LTS01.c |
---|
0,0 → 1,16 |
float LTS01_get_temp() |
{ |
int8 MSB, LSB; |
i2c_start(); |
I2C_Write(LTS01A_address); |
I2C_write(0x00); |
i2c_stop(); |
i2c_start(); |
I2C_Write(LTS01A_address+1); |
MSB=i2c_read(1); |
LSB=i2c_read(0); |
i2c_stop(); |
return (MAKE16(MSB,LSB) * 0.00390625 ); |
} |
/Modules/Sensors/LTS01A/SW/LTS01.h |
---|
0,0 → 1,6 |
//Adresa pro VDD, VDD, VDD W 0x9E R 0x9F |
//Adresa pro GND GND GND W 0x90 R 0x91 |
#define LTS01A_address 0x90 |
#include "LTS01.c" |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.c |
---|
0,0 → 1,31 |
#include "main.h" |
#define S_SDA PIN_C4 |
#define S_SCL PIN_C3 |
#use i2c(master, sda=S_SDA, scl=S_SCL) |
#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8) |
#include "../LTS01.h" |
void main() |
{ |
setup_adc_ports(NO_ANALOGS|VSS_VDD); |
setup_adc(ADC_CLOCK_DIV_2); |
setup_spi(SPI_SS_DISABLED); |
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
setup_timer_1(T1_DISABLED); |
setup_timer_2(T2_DISABLED,0,1); |
setup_ccp1(CCP_OFF); |
setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
printf("Simple Thermomether with LTS01A sensor \r\n",); |
printf("(c) MLAB.cz 2013 JACHO \r\n",); |
while(TRUE) |
{ |
printf("T: %f\r\n", LTS01_get_temp()); |
delay_ms(500); |
} |
} |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.cof |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.err |
---|
0,0 → 1,2 |
Memory usage: ROM=13% RAM=3% - 10% |
0 Errors, 0 Warnings. |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.esym |
---|
0,0 → 1,417 |
D G "__PCM__" 0 33 ""4.106"" |
D G "__DEVICE__" 0 33 "887" |
D G "__DATE__" 0 33 ""26-VIII-13"" |
D G "__TIME__" 0 33 ""18:26:57"" "Standard Header file for the PIC16F887 device ////////////////" |
d G "PIN_A0" 2 20 "40" |
d G "PIN_A1" 2 21 "41" |
d G "PIN_A2" 2 22 "42" |
d G "PIN_A3" 2 23 "43" |
d G "PIN_A4" 2 24 "44" |
d G "PIN_A5" 2 25 "45" |
d G "PIN_A6" 2 26 "46" |
d G "PIN_A7" 2 27 "47" |
d G "PIN_B0" 2 29 "48" |
d G "PIN_B1" 2 30 "49" |
d G "PIN_B2" 2 31 "50" |
d G "PIN_B3" 2 32 "51" |
d G "PIN_B4" 2 33 "52" |
d G "PIN_B5" 2 34 "53" |
d G "PIN_B6" 2 35 "54" |
d G "PIN_B7" 2 36 "55" |
d G "PIN_C0" 2 38 "56" |
d G "PIN_C1" 2 39 "57" |
d G "PIN_C2" 2 40 "58" |
d G "PIN_C3" 2 41 "59" |
d G "PIN_C4" 2 42 "60" |
d G "PIN_C5" 2 43 "61" |
d G "PIN_C6" 2 44 "62" |
d G "PIN_C7" 2 45 "63" |
d G "PIN_D0" 2 47 "64" |
d G "PIN_D1" 2 48 "65" |
d G "PIN_D2" 2 49 "66" |
d G "PIN_D3" 2 50 "67" |
d G "PIN_D4" 2 51 "68" |
d G "PIN_D5" 2 52 "69" |
d G "PIN_D6" 2 53 "70" |
d G "PIN_D7" 2 54 "71" |
d G "PIN_E0" 2 56 "72" |
d G "PIN_E1" 2 57 "73" |
d G "PIN_E2" 2 58 "74" |
d G "PIN_E3" 2 59 "75" |
d G "FALSE" 2 62 "0" |
d G "TRUE" 2 63 "1" |
d G "BYTE" 2 65 "int8" |
d G "BOOLEAN" 2 66 "int1" |
d G "getc" 2 68 "getch" |
d G "fgetc" 2 69 "getch" |
d G "getchar" 2 70 "getch" |
d G "putc" 2 71 "putchar" |
d G "fputc" 2 72 "putchar" |
d G "fgets" 2 73 "gets" |
d G "fputs" 2 74 "puts" |
d G "WDT_FROM_SLEEP" 2 79 "3" |
d G "WDT_TIMEOUT" 2 80 "11" |
d G "MCLR_FROM_SLEEP" 2 81 "19" |
d G "MCLR_FROM_RUN" 2 82 "27" |
d G "NORMAL_POWER_UP" 2 83 "25" |
d G "BROWNOUT_RESTART" 2 84 "26" |
d G "T0_INTERNAL" 2 91 "0" |
d G "T0_EXT_L_TO_H" 2 92 "32" |
d G "T0_EXT_H_TO_L" 2 93 "48" |
d G "T0_DIV_1" 2 95 "8" |
d G "T0_DIV_2" 2 96 "0" |
d G "T0_DIV_4" 2 97 "1" |
d G "T0_DIV_8" 2 98 "2" |
d G "T0_DIV_16" 2 99 "3" |
d G "T0_DIV_32" 2 100 "4" |
d G "T0_DIV_64" 2 101 "5" |
d G "T0_DIV_128" 2 102 "6" |
d G "T0_DIV_256" 2 103 "7" |
d G "T0_8_BIT" 2 106 "0" |
d G "RTCC_INTERNAL" 2 108 "0" "The following are provided for compatibility" |
d G "RTCC_EXT_L_TO_H" 2 109 "32" "with older compiler versions" |
d G "RTCC_EXT_H_TO_L" 2 110 "48" |
d G "RTCC_DIV_1" 2 111 "8" |
d G "RTCC_DIV_2" 2 112 "0" |
d G "RTCC_DIV_4" 2 113 "1" |
d G "RTCC_DIV_8" 2 114 "2" |
d G "RTCC_DIV_16" 2 115 "3" |
d G "RTCC_DIV_32" 2 116 "4" |
d G "RTCC_DIV_64" 2 117 "5" |
d G "RTCC_DIV_128" 2 118 "6" |
d G "RTCC_DIV_256" 2 119 "7" |
d G "RTCC_8_BIT" 2 120 "0" |
d G "WDT_18MS" 2 132 "8" |
d G "WDT_36MS" 2 133 "9" |
d G "WDT_72MS" 2 134 "10" |
d G "WDT_144MS" 2 135 "11" |
d G "WDT_288MS" 2 136 "12" |
d G "WDT_576MS" 2 137 "13" |
d G "WDT_1152MS" 2 138 "14" |
d G "WDT_2304MS" 2 139 "15" |
d G "WDT_ON" 2 143 "0x4100" |
d G "WDT_OFF" 2 144 "0" |
d G "WDT_DIV_16" 2 145 "0x100" |
d G "WDT_DIV_8" 2 146 "0x300" |
d G "WDT_DIV_4" 2 147 "0x500" |
d G "WDT_DIV_2" 2 148 "0x700" |
d G "WDT_TIMES_1" 2 149 "0x900" "Default" |
d G "WDT_TIMES_2" 2 150 "0xB00" |
d G "WDT_TIMES_4" 2 151 "0xD00" |
d G "WDT_TIMES_8" 2 152 "0xF00" |
d G "WDT_TIMES_16" 2 153 "0x1100" |
d G "WDT_TIMES_32" 2 154 "0x1300" |
d G "WDT_TIMES_64" 2 155 "0x1500" |
d G "WDT_TIMES_128" 2 156 "0x1700" |
d G "T1_DISABLED" 2 162 "0" |
d G "T1_INTERNAL" 2 163 "5" |
d G "T1_EXTERNAL" 2 164 "7" |
d G "T1_EXTERNAL_SYNC" 2 165 "3" |
d G "T1_CLK_OUT" 2 167 "8" |
d G "T1_DIV_BY_1" 2 169 "0" |
d G "T1_DIV_BY_2" 2 170 "0x10" |
d G "T1_DIV_BY_4" 2 171 "0x20" |
d G "T1_DIV_BY_8" 2 172 "0x30" |
d G "T1_GATE" 2 174 "0x40" |
d G "T1_GATE_INVERTED" 2 175 "0xC0" |
d G "T2_DISABLED" 2 180 "0" |
d G "T2_DIV_BY_1" 2 181 "4" |
d G "T2_DIV_BY_4" 2 182 "5" |
d G "T2_DIV_BY_16" 2 183 "6" |
d G "CCP_OFF" 2 189 "0" |
d G "CCP_CAPTURE_FE" 2 190 "4" |
d G "CCP_CAPTURE_RE" 2 191 "5" |
d G "CCP_CAPTURE_DIV_4" 2 192 "6" |
d G "CCP_CAPTURE_DIV_16" 2 193 "7" |
d G "CCP_COMPARE_SET_ON_MATCH" 2 194 "8" |
d G "CCP_COMPARE_CLR_ON_MATCH" 2 195 "9" |
d G "CCP_COMPARE_INT" 2 196 "0xA" |
d G "CCP_COMPARE_RESET_TIMER" 2 197 "0xB" |
d G "CCP_PWM" 2 198 "0xC" |
d G "CCP_PWM_PLUS_1" 2 199 "0x1c" |
d G "CCP_PWM_PLUS_2" 2 200 "0x2c" |
d G "CCP_PWM_PLUS_3" 2 201 "0x3c" |
d G "CCP_PWM_H_H" 2 206 "0x0c" |
d G "CCP_PWM_H_L" 2 207 "0x0d" |
d G "CCP_PWM_L_H" 2 208 "0x0e" |
d G "CCP_PWM_L_L" 2 209 "0x0f" |
d G "CCP_PWM_FULL_BRIDGE" 2 211 "0x40" |
d G "CCP_PWM_FULL_BRIDGE_REV" 2 212 "0xC0" |
d G "CCP_PWM_HALF_BRIDGE" 2 213 "0x80" |
d G "CCP_SHUTDOWN_ON_COMP1" 2 215 "0x100000" |
d G "CCP_SHUTDOWN_ON_COMP2" 2 216 "0x200000" |
d G "CCP_SHUTDOWN_ON_COMP" 2 217 "0x300000" |
d G "CCP_SHUTDOWN_ON_INT0" 2 218 "0x400000" |
d G "CCP_SHUTDOWN_ON_COMP1_INT0" 2 219 "0x500000" |
d G "CCP_SHUTDOWN_ON_COMP2_INT0" 2 220 "0x600000" |
d G "CCP_SHUTDOWN_ON_COMP_INT0" 2 221 "0x700000" |
d G "CCP_SHUTDOWN_AC_L" 2 223 "0x000000" |
d G "CCP_SHUTDOWN_AC_H" 2 224 "0x040000" |
d G "CCP_SHUTDOWN_AC_F" 2 225 "0x080000" |
d G "CCP_SHUTDOWN_BD_L" 2 227 "0x000000" |
d G "CCP_SHUTDOWN_BD_H" 2 228 "0x010000" |
d G "CCP_SHUTDOWN_BD_F" 2 229 "0x020000" |
d G "CCP_SHUTDOWN_RESTART" 2 231 "0x80000000" |
d G "CCP_PULSE_STEERING_A" 2 233 "0x01000000" |
d G "CCP_PULSE_STEERING_B" 2 234 "0x02000000" |
d G "CCP_PULSE_STEERING_C" 2 235 "0x04000000" |
d G "CCP_PULSE_STEERING_D" 2 236 "0x08000000" |
d G "CCP_PULSE_STEERING_SYNC" 2 237 "0x10000000" |
d G "SPI_MASTER" 2 245 "0x20" |
d G "SPI_SLAVE" 2 246 "0x24" |
d G "SPI_L_TO_H" 2 247 "0" |
d G "SPI_H_TO_L" 2 248 "0x10" |
d G "SPI_CLK_DIV_4" 2 249 "0" |
d G "SPI_CLK_DIV_16" 2 250 "1" |
d G "SPI_CLK_DIV_64" 2 251 "2" |
d G "SPI_CLK_T2" 2 252 "3" |
d G "SPI_SS_DISABLED" 2 253 "1" |
d G "SPI_SAMPLE_AT_END" 2 255 "0x8000" |
d G "SPI_XMIT_L_TO_H" 2 256 "0x4000" |
d G "UART_ADDRESS" 2 262 "2" |
d G "UART_DATA" 2 263 "4" |
d G "UART_AUTODETECT" 2 264 "8" |
d G "UART_AUTODETECT_NOWAIT" 2 265 "9" |
d G "UART_WAKEUP_ON_RDA" 2 266 "10" |
d G "UART_SEND_BREAK" 2 267 "13" |
d G "NC_NC_NC_NC" 2 273 "0x00" |
d G "NC_NC" 2 274 "0x00" |
d G "CP1_A0_A3" 2 277 "0x00090080" |
d G "CP1_A1_A3" 2 278 "0x000A0081" |
d G "CP1_B3_A3" 2 279 "0x00880082" |
d G "CP1_B1_A3" 2 280 "0x00280083" |
d G "CP1_A0_VREF" 2 281 "0x00010084" |
d G "CP1_A1_VREF" 2 282 "0x00020085" |
d G "CP1_B3_VREF" 2 283 "0x00800086" |
d G "CP1_B1_VREF" 2 284 "0x00200087" |
d G "CP1_OUT_ON_A4" 2 286 "0x00000020" |
d G "CP1_INVERT" 2 287 "0x00000010" |
d G "CP1_ABSOLUTE_VREF" 2 288 "0x20000000" |
d G "CP2_A0_A2" 2 291 "0x00058000" |
d G "CP2_A1_A2" 2 292 "0x00068100" |
d G "CP2_B3_A2" 2 293 "0x00848200" |
d G "CP2_B1_A2" 2 294 "0x00248300" |
d G "CP2_A0_VREF" 2 295 "0x00018400" |
d G "CP2_A1_VREF" 2 296 "0x00028500" |
d G "CP2_B3_VREF" 2 297 "0x00808600" |
d G "CP2_B1_VREF" 2 298 "0x00208700" |
d G "CP2_OUT_ON_A5" 2 300 "0x00002000" |
d G "CP2_INVERT" 2 301 "0x00001000" |
d G "CP2_ABSOLUTE_VREF" 2 302 "0x10000000" |
d G "CP2_T1_SYNC" 2 305 "0x01000000" |
d G "CP2_T1_GATE" 2 306 "0x02000000" |
d G "VREF_LOW" 2 315 "0xa0" |
d G "VREF_HIGH" 2 316 "0x80" |
d G "OSC_31KHZ" 2 322 "1" |
d G "OSC_125KHZ" 2 323 "0x11" |
d G "OSC_250KHZ" 2 324 "0x21" |
d G "OSC_500KHZ" 2 325 "0x31" |
d G "OSC_1MHZ" 2 326 "0x41" |
d G "OSC_2MHZ" 2 327 "0x51" |
d G "OSC_4MHZ" 2 328 "0x61" |
d G "OSC_8MHZ" 2 329 "0x71" |
d G "OSC_INTRC" 2 330 "1" |
d G "OSC_NORMAL" 2 331 "0" |
d G "OSC_STATE_STABLE" 2 333 "4" |
d G "OSC_31KHZ_STABLE" 2 334 "2" |
d G "ADC_OFF" 2 342 "0" "ADC Off" |
d G "ADC_CLOCK_DIV_2" 2 343 "0x100" |
d G "ADC_CLOCK_DIV_8" 2 344 "0x40" |
d G "ADC_CLOCK_DIV_32" 2 345 "0x80" |
d G "ADC_CLOCK_INTERNAL" 2 346 "0xc0" "Internal 2-6us" |
d G "sAN0" 2 350 "1" "| A0" |
d G "sAN1" 2 351 "2" "| A1" |
d G "sAN2" 2 352 "4" "| A2" |
d G "sAN3" 2 353 "8" "| A3" |
d G "sAN4" 2 354 "16" "| A5" |
d G "sAN5" 2 355 "32" "| E0" |
d G "sAN6" 2 356 "64" "| E1" |
d G "sAN7" 2 357 "128" "| E2" |
d G "sAN8" 2 358 "0x10000" "| B2" |
d G "sAN9" 2 359 "0x20000" "| B3" |
d G "sAN10" 2 360 "0x40000" "| B1" |
d G "sAN11" 2 361 "0x80000" "| B4" |
d G "sAN12" 2 362 "0x100000" "| B0" |
d G "sAN13" 2 363 "0x200000" "| B5" |
d G "NO_ANALOGS" 2 364 "0" "None" |
d G "ALL_ANALOG" 2 365 "0x1F00FF" "A0 A1 A2 A3 A5 E0 E1 E2 B0 B1 B2 B3 B4 B5" |
d G "VSS_VDD" 2 368 "0x0000" "| Range 0-Vdd" |
d G "VSS_VREF" 2 369 "0x1000" "| Range 0-Vref" |
d G "VREF_VREF" 2 370 "0x3000" "| Range Vref-Vref" |
d G "VREF_VDD" 2 371 "0x2000" "| Range Vref-Vdd" |
d G "ADC_START_AND_READ" 2 375 "7" "This is the default if nothing is specified" |
d G "ADC_START_ONLY" 2 376 "1" |
d G "ADC_READ_ONLY" 2 377 "6" |
d G "L_TO_H" 2 389 "0x40" |
d G "H_TO_L" 2 390 "0" |
d G "GLOBAL" 2 392 "0x0BC0" |
d G "INT_RTCC" 2 393 "0x000B20" |
d G "INT_RB" 2 394 "0x01FF0B08" |
d G "INT_EXT_L2H" 2 395 "0x50000B10" |
d G "INT_EXT_H2L" 2 396 "0x60000B10" |
d G "INT_EXT" 2 397 "0x000B10" |
d G "INT_AD" 2 398 "0x008C40" |
d G "INT_TBE" 2 399 "0x008C10" |
d G "INT_RDA" 2 400 "0x008C20" |
d G "INT_TIMER1" 2 401 "0x008C01" |
d G "INT_TIMER2" 2 402 "0x008C02" |
d G "INT_CCP1" 2 403 "0x008C04" |
d G "INT_CCP2" 2 404 "0x008D01" |
d G "INT_SSP" 2 405 "0x008C08" |
d G "INT_BUSCOL" 2 406 "0x008D08" |
d G "INT_EEPROM" 2 407 "0x008D10" |
d G "INT_TIMER0" 2 408 "0x000B20" |
d G "INT_OSC_FAIL" 2 409 "0x008D80" |
d G "INT_COMP" 2 410 "0x008D20" |
d G "INT_COMP2" 2 411 "0x008D40" |
d G "INT_ULPWU" 2 412 "0x008D04" |
d G "INT_RB0" 2 413 "0x0010B08" |
d G "INT_RB1" 2 414 "0x0020B08" |
d G "INT_RB2" 2 415 "0x0040B08" |
d G "INT_RB3" 2 416 "0x0080B08" |
d G "INT_RB4" 2 417 "0x0100B08" |
d G "INT_RB5" 2 418 "0x0200B08" |
d G "INT_RB6" 2 419 "0x0400B08" |
d G "INT_RB7" 2 420 "0x0800B08" |
D G "S_SDA" 0 3 "PIN_C4" |
D G "S_SCL" 0 4 "PIN_C3" |
D G "LTS01A_address" 3 4 "0x90" |
F G "LTS01_get_temp" 4 1 "float()" |
V L "MSB" 4 3 "int8" |
V L "LSB" 4 3 "int8" |
F G "MAIN" 0 10 "void()" |
C L "MAIN" 0 20 1 "FUNCTION" |
F B "reset_cpu" 0 0 |
F B "abs" 1 0 |
F B "sleep_ulpwu" 1 0 |
F B "sleep" 0 0 |
F B "delay_cycles" 1 0 |
F B "read_bank" 2 0 |
F B "write_bank" 3 0 |
F B "shift_left" 2 2 |
F B "shift_right" 2 2 |
F B "rotate_left" 2 0 |
F B "rotate_right" 2 0 |
F B "_mul" 2 0 |
F B "memset" 3 0 |
F B "isamoung" 2 0 |
F B "isamong" 2 0 |
F B "bit_set" 2 0 |
F B "bit_clear" 2 0 |
F B "bit_test" 2 0 |
F B "toupper" 1 0 |
F B "tolower" 1 0 |
F B "swap" 1 0 |
F B "printf" 1 255 |
F B "fprintf" 1 255 |
F B "sprintf" 1 255 |
F B "make8" 2 0 |
F B "make16" 2 0 |
F B "make32" 1 255 |
F B "label_address" 1 1 |
F B "goto_address" 1 0 |
F B "_va_arg" 1 0 |
F B "offsetofbit" 2 2 |
F B "enable_interrupts" 1 0 |
F B "disable_interrupts" 1 0 |
F B "interrupt_active" 1 0 |
F B "clear_interrupt" 1 0 |
F B "jump_to_isr" 1 0 |
F B "ext_int_edge" 1 2 |
F B "read_eeprom" 1 0 |
F B "write_eeprom" 2 0 |
F B "read_program_eeprom" 1 0 |
F B "write_program_eeprom" 2 0 |
F B "write_program_memory" 4 0 |
F B "write_program_memory8" 4 0 |
F B "read_program_memory" 4 0 |
F B "read_program_memory8" 4 0 |
F B "erase_program_eeprom" 1 0 |
F B "strcpy" 2 0 |
F B "memcpy" 3 0 |
F B "strstr100" 2 0 |
F B "output_high" 1 0 |
F B "output_low" 1 0 |
F B "input" 1 0 |
F B "input_state" 1 0 |
F B "output_float" 1 0 |
F B "output_drive" 1 0 |
F B "output_bit" 1 1 |
F B "output_toggle" 1 0 |
F B "output_a" 1 0 |
F B "output_b" 1 0 |
F B "output_c" 1 0 |
F B "output_d" 1 0 |
F B "output_e" 1 0 |
F B "input_a" 0 0 |
F B "input_b" 0 0 |
F B "input_c" 0 0 |
F B "input_d" 0 0 |
F B "input_e" 0 0 |
F B "set_tris_a" 1 0 |
F B "set_tris_b" 1 0 |
F B "set_tris_c" 1 0 |
F B "set_tris_d" 1 0 |
F B "set_tris_e" 1 0 |
F B "get_tris_a" 0 0 |
F B "get_tris_b" 0 0 |
F B "get_tris_c" 0 0 |
F B "get_tris_d" 0 0 |
F B "get_tris_e" 0 0 |
F B "input_change_a" 0 0 |
F B "input_change_b" 0 0 |
F B "input_change_c" 0 0 |
F B "input_change_d" 0 0 |
F B "input_change_e" 0 0 |
F B "port_b_pullups" 1 0 |
F B "setup_counters" 2 0 |
F B "setup_wdt" 1 0 |
F B "restart_cause" 0 0 |
F B "restart_wdt" 0 0 |
F B "get_rtcc" 0 0 |
F B "set_rtcc" 1 0 |
F B "get_timer0" 0 0 |
F B "set_timer0" 1 0 |
F B "setup_comparator" 1 0 |
F B "setup_port_a" 1 0 |
F B "setup_adc_ports" 1 0 |
F B "setup_adc" 1 0 |
F B "set_adc_channel" 1 0 |
F B "read_adc" 0 1 |
F B "adc_done" 0 0 |
F B "setup_timer_0" 1 0 |
F B "setup_vref" 1 0 |
F B "setup_timer_1" 1 0 |
F B "get_timer1" 0 0 |
F B "set_timer1" 1 0 |
F B "setup_timer_2" 3 0 |
F B "get_timer2" 0 0 |
F B "set_timer2" 1 0 |
F B "setup_ccp1" 1 2 |
F B "set_pwm1_duty" 1 0 |
F B "setup_ccp2" 1 0 |
F B "set_pwm2_duty" 1 0 |
F B "setup_oscillator" 1 2 |
F B "setup_spi" 1 0 |
F B "spi_read" 0 1 |
F B "spi_write" 1 0 |
F B "spi_data_is_in" 0 0 |
F B "setup_spi2" 1 0 |
F B "spi_read2" 0 1 |
F B "spi_write2" 1 0 |
F B "spi_data_is_in2" 0 0 |
F B "brownout_enable" 1 0 |
F B "delay_ms" 1 0 |
F B "delay_us" 1 0 |
F B "i2c_read" 0 2 |
F B "i2c_write" 1 2 |
F B "i2c_start" 0 2 |
F B "i2c_stop" 0 1 |
F B "i2c_isr_state" 0 1 |
F B "putchar" 1 2 |
F B "puts" 1 2 |
F B "getch" 0 1 |
F B "gets" 1 3 |
F B "kbhit" 0 1 |
F B "set_uart_speed" 1 3 |
F B "setup_uart" 1 3 |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.hex |
---|
0,0 → 1,133 |
:1000000003308A005C2B0000D3346D38EC32202A98 |
:10001000E832F236EF36653AE8327210F73474346B |
:100020002026D429B0184110F332EE396F39A006DA |
:100030000A00A83129104D264121AE317A1032181C |
:10004000B1192025C121C82720100D0500018316F4 |
:1000500003178C170C140000000083120C087F3962 |
:1000600003196D280313A10003170D080313A20041 |
:1000700003170F080313A30021080C1E3D28990045 |
:10008000220803178D000313230803178F0083161C |
:100090008C170C140000000083120C0D0E0D7F391C |
:1000A00003196D280313A10003170D080313A20001 |
:1000B00003170F080313A30021080C1E5D289900E5 |
:1000C000220803178D000313230803178F008D0ADE |
:1000D00003198F0A03132728031703130800083096 |
:1000E000F80000008711A011200883168700000087 |
:1000F0008312A30D0712031C8328201620088316E1 |
:1001000087008728831220122008831687000000AA |
:100110008312A0152008831687008312871D8E285E |
:10012000F80B712800008711A011200883168700A2 |
:1001300000008312201620088316870000000000AC |
:100140008312A0152008831687008312871DA62816 |
:10015000F8010000071A78148711A01120088316EF |
:10016000870083120712201220088316870083124B |
:1001700008000830A4007708A50020162008831680 |
:10018000870000008312A0152008831687008312C1 |
:10019000871DC828071A0314071E0310F80D000056 |
:1001A000A01120088316870083128711A40BBD2895 |
:1001B00020162008831687000000831207122508E6 |
:1001C0000319E728201220088316870083120000F5 |
:1001D000A0152008831687008312871DED280000D4 |
:1001E0008711A011200883168700000083120712D0 |
:1001F0002012200883168700831208003208031992 |
:100200006E29BA00360803196E29BA0703180F2998 |
:100210007F30BA02031C6E2903196E29132981301D |
:10022000BA0703186E293A08F700F801F901FA0134 |
:100230003308BE00BE173408BD003508BC001830B6 |
:10024000BA00BB013C1C3C293908FA07031C2E29C3 |
:10025000F90A031D2E29F80A0319BB173808F907F4 |
:10026000031C3529F80A0319BB173708B400B41763 |
:100270003408F8070318BB17BB0DF80CF90CFA0C7F |
:10028000BE0CBD0CBC0C0310BA0B21290130F707C2 |
:1002900003186E29F81B5329BE0DFA0DF90DF80D40 |
:1002A000F70303196E29BE1F6429FA0A031D642986 |
:1002B000F90A031D6429F80A031D6429F80CF90CD6 |
:1002C000FA0CF70A03196E293308BB003708BB067E |
:1002D000BB1F6C29F8177229F8137229F701F8016E |
:1002E000F901FA0108002016200883168700000093 |
:1002F0008312A015200883168700000083120712BE |
:100300002012200883168700000083128711A01195 |
:1003100020088316870090308312A3006F20A3016A |
:100320006F20201220088316870000008312A0157A |
:100330002008831687008312871D9C290000A029AE |
:100340000000201620088316870000008312201664 |
:1003500020088316870000008312A015200883164A |
:1003600087000000831207122012200883168700DE |
:10037000000083128711A011200883168700913096 |
:100380008312A3006F200130F700B9207808A10084 |
:10039000F701B9207808A2002012200883168700F0 |
:1003A00000008312A0152008831687008312871D82 |
:1003B000D7290000DB2900002016200883168700BB |
:1003C000000083122108A4002208A3002408A6002C |
:1003D0002308A5008E30F7002608F8002508F9004C |
:1003E000FA01F808031DFE297908F800F901083020 |
:1003F000F702F808031DFE29F701062A0310F81B6F |
:10040000052AF90DF80DF703FE29F8137A08B5004F |
:100410007908B4007808B3007708B200B901B801D0 |
:10042000B7017730B600FE208A110A12D32BF701EC |
:10043000F801F901FA01BA01BB01BC01BD0139089B |
:100440003804370436040319552A2030BE0003103F |
:10045000B20DB30DB40DB50DBA0DBB0DBC0DBD0D78 |
:1004600039083D02031D3E2A38083C02031D3E2A7E |
:1004700037083B02031D3E2A36083A02031C4F2A66 |
:100480003608BA023708031C370FBB023808031CB2 |
:10049000380FBC023908031C390FBD020314F70DD5 |
:1004A000F80DF90DFA0DBE0B272A3A30840083139C |
:1004B00008000408AA002908AC000319782A2808B3 |
:1004C000B5002708B4002608B3002508B200B9011A |
:1004D000B8012030B7008230B600FE207A08A800AC |
:1004E0007908A7007808A6007708A500AC0B5F2A5A |
:1004F0002808B5002708B4002608B3002508B20074 |
:100500003208B63CB200FA013308B600B317031044 |
:10051000B30CB40CB50CFA0CF90CF80CF70CB20BCC |
:10052000872AB61F9E2AF709F809F909FA09F70A76 |
:100530000319F80A0319F90A0319FA0A7A08A80034 |
:100540007908A7007808A6007708A500A81FB52A93 |
:10055000AA03AA16A509A609A709A809A50A0319A5 |
:10056000A60A0319A70A0319A80A3B30B1009A305A |
:10057000B000CA30AF00AE010A30AC002908031940 |
:10058000AA0A2808B5002708B4002608B3002508E1 |
:10059000B2003108B9003008B8002F08B7002E08A3 |
:1005A000B60017220008A500840A0008A600840AE5 |
:1005B0000008A700840A0008A800FD308407F70897 |
:1005C000031DF52A290A2C020319F52A2A08031902 |
:1005D000F72A0F392C020319EF2A03182B2BAA1B19 |
:1005E0002B2B2A1BF72A2030262B2030AA05AA1EE7 |
:1005F000062BAA122908031DAA037708AA002D308A |
:100600000C1E002B99002A08F700AA0129082C02C9 |
:10061000031D152B7708AA002E300C1E0D2B9900F8 |
:100620002A08F7002030AA0500303030AA1E262BF9 |
:10063000AA122908031DAA037708AA002D300C1E50 |
:100640001F2B99002A08F700AA013030F707770816 |
:100650000C1E282B99003108B5003008B4002F0873 |
:10066000B3002E08B200B901B801B7010A30B600D4 |
:1006700017227A08B1007908B0007808AF0077082F |
:10068000AE00AC0BC12A8A110A12F42B223084006E |
:10069000831300080319592B0230F800F701F70BF8 |
:1006A0004F2BF80B4E2B9730F700F70B552B800B89 |
:1006B0004C2B8A110A12012C840183131F308305ED |
:1006C000713083168F000F08031787110C30031346 |
:1006D0009900A23098009030831298008316031777 |
:1006E0000908C039890003131F129F120030031735 |
:1006F00088008312870188018901FF300313A0005D |
:10070000831603170908C039890003131F129F12AB |
:10071000003003178800831203131F139F138316DF |
:100720009F1383121F149412A012200883168700AF |
:10073000831220162008831687008312A011200838 |
:1007400083168700013083129400003083169400D2 |
:100750000108C73908388100831290010030F80081 |
:100760009200003083169200831220152008831611 |
:1007700087008312970183169B019C0101309D0025 |
:100780008312031787018801890104308D0000302E |
:100790008F0003132720193003178D0000308F00BE |
:1007A0000313272073297708A1007808A20079088D |
:1007B000A3007A08A40054300C1EDC2B99003A30B8 |
:1007C0000C1EE02B990020300C1EE42B9900893080 |
:1007D00084002408A8002308A7002208A6002108F6 |
:1007E000A5000230A900592A0D300C1EF52B9900E6 |
:1007F0000A300C1EF92B99000230A100FA30A20039 |
:0A080000462BA10BFE2BD22B630048 |
:04400E00F52CFF3F4F |
:00000001FF |
;PIC16F887 |
;CRC=8F98 CREATED="26-VIII-13 18:26" |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.lst |
---|
0,0 → 1,572 |
CCS PCM C Compiler, Version 4.106, 47914 26-VIII-13 18:26 |
Filename: Z:\home\kaklik\svnMLAB\Modules\Sensors\LTS01A\SW\PIC16F887\main.lst |
ROM used: 1029 words (13%) |
Largest free fragment is 2048 |
RAM used: 10 (3%) at main() level |
36 (10%) worst case |
Stack: 2 locations |
* |
0000: MOVLW 03 |
0001: MOVWF 0A |
0002: GOTO 35C |
0003: NOP |
.................... #include "main.h" |
.................... #include <16F887.h> |
.................... //////// Standard Header file for the PIC16F887 device //////////////// |
.................... #device PIC16F887 |
.................... #list |
.................... |
.................... #device adc=8 |
.................... |
.................... #FUSES NOWDT //No Watch Dog Timer |
.................... #FUSES INTRC //Internal RC Osc |
.................... #FUSES NOPUT //No Power Up Timer |
.................... #FUSES MCLR //Master Clear pin enabled |
.................... #FUSES NOPROTECT //Code not protected from reading |
.................... #FUSES NOCPD //No EE protection |
.................... #FUSES NOBROWNOUT //No brownout reset |
.................... #FUSES IESO //Internal External Switch Over mode enabled |
.................... #FUSES FCMEN //Fail-safe clock monitor enabled |
.................... #FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O |
.................... #FUSES NODEBUG //No Debug mode for ICD |
.................... #FUSES NOWRT //Program memory not write protected |
.................... #FUSES BORV40 //Brownout reset at 4.0V |
.................... |
.................... #use delay(clock=8000000) |
* |
0346: MOVLW 22 |
0347: MOVWF 04 |
0348: BCF 03.7 |
0349: MOVF 00,W |
034A: BTFSC 03.2 |
034B: GOTO 359 |
034C: MOVLW 02 |
034D: MOVWF 78 |
034E: CLRF 77 |
034F: DECFSZ 77,F |
0350: GOTO 34F |
0351: DECFSZ 78,F |
0352: GOTO 34E |
0353: MOVLW 97 |
0354: MOVWF 77 |
0355: DECFSZ 77,F |
0356: GOTO 355 |
0357: DECFSZ 00,F |
0358: GOTO 34C |
0359: BCF 0A.3 |
035A: BCF 0A.4 |
035B: GOTO 401 (RETURN) |
.................... |
.................... |
.................... |
.................... #define S_SDA PIN_C4 |
.................... #define S_SCL PIN_C3 |
.................... #use i2c(master, sda=S_SDA, scl=S_SCL) |
* |
006F: MOVLW 08 |
0070: MOVWF 78 |
0071: NOP |
0072: BCF 07.3 |
0073: BCF 20.3 |
0074: MOVF 20,W |
0075: BSF 03.5 |
0076: MOVWF 07 |
0077: NOP |
0078: BCF 03.5 |
0079: RLF 23,F |
007A: BCF 07.4 |
007B: BTFSS 03.0 |
007C: GOTO 083 |
007D: BSF 20.4 |
007E: MOVF 20,W |
007F: BSF 03.5 |
0080: MOVWF 07 |
0081: GOTO 087 |
0082: BCF 03.5 |
0083: BCF 20.4 |
0084: MOVF 20,W |
0085: BSF 03.5 |
0086: MOVWF 07 |
0087: NOP |
0088: BCF 03.5 |
0089: BSF 20.3 |
008A: MOVF 20,W |
008B: BSF 03.5 |
008C: MOVWF 07 |
008D: BCF 03.5 |
008E: BTFSS 07.3 |
008F: GOTO 08E |
0090: DECFSZ 78,F |
0091: GOTO 071 |
0092: NOP |
0093: BCF 07.3 |
0094: BCF 20.3 |
0095: MOVF 20,W |
0096: BSF 03.5 |
0097: MOVWF 07 |
0098: NOP |
0099: BCF 03.5 |
009A: BSF 20.4 |
009B: MOVF 20,W |
009C: BSF 03.5 |
009D: MOVWF 07 |
009E: NOP |
009F: NOP |
00A0: BCF 03.5 |
00A1: BSF 20.3 |
00A2: MOVF 20,W |
00A3: BSF 03.5 |
00A4: MOVWF 07 |
00A5: BCF 03.5 |
00A6: BTFSS 07.3 |
00A7: GOTO 0A6 |
00A8: CLRF 78 |
00A9: NOP |
00AA: BTFSC 07.4 |
00AB: BSF 78.0 |
00AC: BCF 07.3 |
00AD: BCF 20.3 |
00AE: MOVF 20,W |
00AF: BSF 03.5 |
00B0: MOVWF 07 |
00B1: BCF 03.5 |
00B2: BCF 07.4 |
00B3: BCF 20.4 |
00B4: MOVF 20,W |
00B5: BSF 03.5 |
00B6: MOVWF 07 |
00B7: BCF 03.5 |
00B8: RETURN |
00B9: MOVLW 08 |
00BA: MOVWF 24 |
00BB: MOVF 77,W |
00BC: MOVWF 25 |
00BD: BSF 20.4 |
00BE: MOVF 20,W |
00BF: BSF 03.5 |
00C0: MOVWF 07 |
00C1: NOP |
00C2: BCF 03.5 |
00C3: BSF 20.3 |
00C4: MOVF 20,W |
00C5: BSF 03.5 |
00C6: MOVWF 07 |
00C7: BCF 03.5 |
00C8: BTFSS 07.3 |
00C9: GOTO 0C8 |
00CA: BTFSC 07.4 |
00CB: BSF 03.0 |
00CC: BTFSS 07.4 |
00CD: BCF 03.0 |
00CE: RLF 78,F |
00CF: NOP |
00D0: BCF 20.3 |
00D1: MOVF 20,W |
00D2: BSF 03.5 |
00D3: MOVWF 07 |
00D4: BCF 03.5 |
00D5: BCF 07.3 |
00D6: DECFSZ 24,F |
00D7: GOTO 0BD |
00D8: BSF 20.4 |
00D9: MOVF 20,W |
00DA: BSF 03.5 |
00DB: MOVWF 07 |
00DC: NOP |
00DD: BCF 03.5 |
00DE: BCF 07.4 |
00DF: MOVF 25,W |
00E0: BTFSC 03.2 |
00E1: GOTO 0E7 |
00E2: BCF 20.4 |
00E3: MOVF 20,W |
00E4: BSF 03.5 |
00E5: MOVWF 07 |
00E6: BCF 03.5 |
00E7: NOP |
00E8: BSF 20.3 |
00E9: MOVF 20,W |
00EA: BSF 03.5 |
00EB: MOVWF 07 |
00EC: BCF 03.5 |
00ED: BTFSS 07.3 |
00EE: GOTO 0ED |
00EF: NOP |
00F0: BCF 07.3 |
00F1: BCF 20.3 |
00F2: MOVF 20,W |
00F3: BSF 03.5 |
00F4: MOVWF 07 |
00F5: NOP |
00F6: BCF 03.5 |
00F7: BCF 07.4 |
00F8: BCF 20.4 |
00F9: MOVF 20,W |
00FA: BSF 03.5 |
00FB: MOVWF 07 |
00FC: BCF 03.5 |
00FD: RETURN |
.................... #use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8) |
.................... |
.................... #include "../LTS01.h" |
.................... //Adresa pro VDD, VDD, VDD W 0x9E R 0x9F |
.................... //Adresa pro GND GND GND W 0x90 R 0x91 |
.................... |
.................... #define LTS01A_address 0x90 |
.................... |
.................... #include "LTS01.c" |
.................... float LTS01_get_temp() |
.................... { |
.................... int8 MSB, LSB; |
.................... |
.................... i2c_start(); |
* |
0173: BSF 20.4 |
0174: MOVF 20,W |
0175: BSF 03.5 |
0176: MOVWF 07 |
0177: NOP |
0178: BCF 03.5 |
0179: BSF 20.3 |
017A: MOVF 20,W |
017B: BSF 03.5 |
017C: MOVWF 07 |
017D: NOP |
017E: BCF 03.5 |
017F: BCF 07.4 |
0180: BCF 20.4 |
0181: MOVF 20,W |
0182: BSF 03.5 |
0183: MOVWF 07 |
0184: NOP |
0185: BCF 03.5 |
0186: BCF 07.3 |
0187: BCF 20.3 |
0188: MOVF 20,W |
0189: BSF 03.5 |
018A: MOVWF 07 |
.................... I2C_Write(LTS01A_address); |
018B: MOVLW 90 |
018C: BCF 03.5 |
018D: MOVWF 23 |
018E: CALL 06F |
.................... I2C_write(0x00); |
018F: CLRF 23 |
0190: CALL 06F |
.................... i2c_stop(); |
0191: BCF 20.4 |
0192: MOVF 20,W |
0193: BSF 03.5 |
0194: MOVWF 07 |
0195: NOP |
0196: BCF 03.5 |
0197: BSF 20.3 |
0198: MOVF 20,W |
0199: BSF 03.5 |
019A: MOVWF 07 |
019B: BCF 03.5 |
019C: BTFSS 07.3 |
019D: GOTO 19C |
019E: NOP |
019F: GOTO 1A0 |
01A0: NOP |
01A1: BSF 20.4 |
01A2: MOVF 20,W |
01A3: BSF 03.5 |
01A4: MOVWF 07 |
01A5: NOP |
.................... i2c_start(); |
01A6: BCF 03.5 |
01A7: BSF 20.4 |
01A8: MOVF 20,W |
01A9: BSF 03.5 |
01AA: MOVWF 07 |
01AB: NOP |
01AC: BCF 03.5 |
01AD: BSF 20.3 |
01AE: MOVF 20,W |
01AF: BSF 03.5 |
01B0: MOVWF 07 |
01B1: NOP |
01B2: BCF 03.5 |
01B3: BCF 07.4 |
01B4: BCF 20.4 |
01B5: MOVF 20,W |
01B6: BSF 03.5 |
01B7: MOVWF 07 |
01B8: NOP |
01B9: BCF 03.5 |
01BA: BCF 07.3 |
01BB: BCF 20.3 |
01BC: MOVF 20,W |
01BD: BSF 03.5 |
01BE: MOVWF 07 |
.................... I2C_Write(LTS01A_address+1); |
01BF: MOVLW 91 |
01C0: BCF 03.5 |
01C1: MOVWF 23 |
01C2: CALL 06F |
.................... MSB=i2c_read(1); |
01C3: MOVLW 01 |
01C4: MOVWF 77 |
01C5: CALL 0B9 |
01C6: MOVF 78,W |
01C7: MOVWF 21 |
.................... LSB=i2c_read(0); |
01C8: CLRF 77 |
01C9: CALL 0B9 |
01CA: MOVF 78,W |
01CB: MOVWF 22 |
.................... i2c_stop(); |
01CC: BCF 20.4 |
01CD: MOVF 20,W |
01CE: BSF 03.5 |
01CF: MOVWF 07 |
01D0: NOP |
01D1: BCF 03.5 |
01D2: BSF 20.3 |
01D3: MOVF 20,W |
01D4: BSF 03.5 |
01D5: MOVWF 07 |
01D6: BCF 03.5 |
01D7: BTFSS 07.3 |
01D8: GOTO 1D7 |
01D9: NOP |
01DA: GOTO 1DB |
01DB: NOP |
01DC: BSF 20.4 |
01DD: MOVF 20,W |
01DE: BSF 03.5 |
01DF: MOVWF 07 |
01E0: NOP |
.................... |
.................... return (MAKE16(MSB,LSB) * 0.00390625 ); |
01E1: BCF 03.5 |
01E2: MOVF 21,W |
01E3: MOVWF 24 |
01E4: MOVF 22,W |
01E5: MOVWF 23 |
01E6: MOVF 24,W |
01E7: MOVWF 26 |
01E8: MOVF 23,W |
01E9: MOVWF 25 |
* |
0206: MOVF 7A,W |
0207: MOVWF 35 |
0208: MOVF 79,W |
0209: MOVWF 34 |
020A: MOVF 78,W |
020B: MOVWF 33 |
020C: MOVF 77,W |
020D: MOVWF 32 |
020E: CLRF 39 |
020F: CLRF 38 |
0210: CLRF 37 |
0211: MOVLW 77 |
0212: MOVWF 36 |
0213: CALL 0FE |
.................... } |
0214: BCF 0A.3 |
0215: BCF 0A.4 |
0216: GOTO 3D3 (RETURN) |
.................... |
.................... |
.................... |
.................... |
.................... void main() |
.................... { |
* |
035C: CLRF 04 |
035D: BCF 03.7 |
035E: MOVLW 1F |
035F: ANDWF 03,F |
0360: MOVLW 71 |
0361: BSF 03.5 |
0362: MOVWF 0F |
0363: MOVF 0F,W |
0364: BSF 03.6 |
0365: BCF 07.3 |
0366: MOVLW 0C |
0367: BCF 03.6 |
0368: MOVWF 19 |
0369: MOVLW A2 |
036A: MOVWF 18 |
036B: MOVLW 90 |
036C: BCF 03.5 |
036D: MOVWF 18 |
036E: BSF 03.5 |
036F: BSF 03.6 |
0370: MOVF 09,W |
0371: ANDLW C0 |
0372: MOVWF 09 |
0373: BCF 03.6 |
0374: BCF 1F.4 |
0375: BCF 1F.5 |
0376: MOVLW 00 |
0377: BSF 03.6 |
0378: MOVWF 08 |
0379: BCF 03.5 |
037A: CLRF 07 |
037B: CLRF 08 |
037C: CLRF 09 |
.................... |
.................... setup_adc_ports(NO_ANALOGS|VSS_VDD); |
* |
0380: BSF 03.5 |
0381: BSF 03.6 |
0382: MOVF 09,W |
0383: ANDLW C0 |
0384: MOVWF 09 |
0385: BCF 03.6 |
0386: BCF 1F.4 |
0387: BCF 1F.5 |
0388: MOVLW 00 |
0389: BSF 03.6 |
038A: MOVWF 08 |
.................... setup_adc(ADC_CLOCK_DIV_2); |
038B: BCF 03.5 |
038C: BCF 03.6 |
038D: BCF 1F.6 |
038E: BCF 1F.7 |
038F: BSF 03.5 |
0390: BCF 1F.7 |
0391: BCF 03.5 |
0392: BSF 1F.0 |
.................... setup_spi(SPI_SS_DISABLED); |
0393: BCF 14.5 |
0394: BCF 20.5 |
0395: MOVF 20,W |
0396: BSF 03.5 |
0397: MOVWF 07 |
0398: BCF 03.5 |
0399: BSF 20.4 |
039A: MOVF 20,W |
039B: BSF 03.5 |
039C: MOVWF 07 |
039D: BCF 03.5 |
039E: BCF 20.3 |
039F: MOVF 20,W |
03A0: BSF 03.5 |
03A1: MOVWF 07 |
03A2: MOVLW 01 |
03A3: BCF 03.5 |
03A4: MOVWF 14 |
03A5: MOVLW 00 |
03A6: BSF 03.5 |
03A7: MOVWF 14 |
.................... setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
03A8: MOVF 01,W |
03A9: ANDLW C7 |
03AA: IORLW 08 |
03AB: MOVWF 01 |
.................... setup_timer_1(T1_DISABLED); |
03AC: BCF 03.5 |
03AD: CLRF 10 |
.................... setup_timer_2(T2_DISABLED,0,1); |
03AE: MOVLW 00 |
03AF: MOVWF 78 |
03B0: MOVWF 12 |
03B1: MOVLW 00 |
03B2: BSF 03.5 |
03B3: MOVWF 12 |
.................... setup_ccp1(CCP_OFF); |
03B4: BCF 03.5 |
03B5: BSF 20.2 |
03B6: MOVF 20,W |
03B7: BSF 03.5 |
03B8: MOVWF 07 |
03B9: BCF 03.5 |
03BA: CLRF 17 |
03BB: BSF 03.5 |
03BC: CLRF 1B |
03BD: CLRF 1C |
03BE: MOVLW 01 |
03BF: MOVWF 1D |
.................... setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
03C0: BCF 03.5 |
03C1: BSF 03.6 |
03C2: CLRF 07 |
03C3: CLRF 08 |
03C4: CLRF 09 |
.................... |
.................... printf("Simple Thermomether with LTS01A sensor \r\n",); |
03C5: MOVLW 04 |
03C6: MOVWF 0D |
03C7: MOVLW 00 |
03C8: MOVWF 0F |
03C9: BCF 03.6 |
03CA: CALL 027 |
.................... printf("(c) MLAB.cz 2013 JACHO \r\n",); |
03CB: MOVLW 19 |
03CC: BSF 03.6 |
03CD: MOVWF 0D |
03CE: MOVLW 00 |
03CF: MOVWF 0F |
03D0: BCF 03.6 |
03D1: CALL 027 |
.................... |
.................... while(TRUE) |
.................... { |
.................... printf("T: %f\r\n", LTS01_get_temp()); |
03D2: GOTO 173 |
03D3: MOVF 77,W |
03D4: MOVWF 21 |
03D5: MOVF 78,W |
03D6: MOVWF 22 |
03D7: MOVF 79,W |
03D8: MOVWF 23 |
03D9: MOVF 7A,W |
03DA: MOVWF 24 |
03DB: MOVLW 54 |
03DC: BTFSS 0C.4 |
03DD: GOTO 3DC |
03DE: MOVWF 19 |
03DF: MOVLW 3A |
03E0: BTFSS 0C.4 |
03E1: GOTO 3E0 |
03E2: MOVWF 19 |
03E3: MOVLW 20 |
03E4: BTFSS 0C.4 |
03E5: GOTO 3E4 |
03E6: MOVWF 19 |
03E7: MOVLW 89 |
03E8: MOVWF 04 |
03E9: MOVF 24,W |
03EA: MOVWF 28 |
03EB: MOVF 23,W |
03EC: MOVWF 27 |
03ED: MOVF 22,W |
03EE: MOVWF 26 |
03EF: MOVF 21,W |
03F0: MOVWF 25 |
03F1: MOVLW 02 |
03F2: MOVWF 29 |
03F3: GOTO 259 |
03F4: MOVLW 0D |
03F5: BTFSS 0C.4 |
03F6: GOTO 3F5 |
03F7: MOVWF 19 |
03F8: MOVLW 0A |
03F9: BTFSS 0C.4 |
03FA: GOTO 3F9 |
03FB: MOVWF 19 |
.................... delay_ms(500); |
03FC: MOVLW 02 |
03FD: MOVWF 21 |
03FE: MOVLW FA |
03FF: MOVWF 22 |
0400: GOTO 346 |
0401: DECFSZ 21,F |
0402: GOTO 3FE |
.................... } |
0403: GOTO 3D2 |
.................... } |
.................... |
0404: SLEEP |
Configuration Fuses: |
Word 1: 2CF5 INTRC NOWDT NOPUT MCLR NOPROTECT NOCPD NOBROWNOUT IESO FCMEN NOLVP NODEBUG |
Word 2: 3FFF NOWRT BORV40 |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.pjt |
---|
0,0 → 1,28 |
[PROJECT] |
Target=main.hex |
Development_Mode= |
Processor_Text=PIC16F887 |
ToolSuite=CCS |
Processor=0x887F |
[main] |
Type=4 |
Path= |
FileList= |
BuildTool= |
OptionString= |
AdditionalOptionString= |
[mru-list] |
1=main.c |
[Windows] |
0=0000 %S 0 0 796 451 3 0 |
[Opened Files] |
1=main.c |
2= |
3=C:\Program Files (x86)\PICC\devices\16F887.h |
4= |
[Target Data] |
OptionString=-p +FM |
FileList=Z:\home\kaklik\svnMLAB\Modules\Sensors\LTS01A\SW\PIC16F887\main.c |
[Units] |
Count=1 |
1=main (main) |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.sta |
---|
0,0 → 1,60 |
ROM used: 1029 (13%) |
1029 (13%) including unused fragments |
2 Average locations per line |
43 Average locations per statement |
RAM used: 10 (3%) at main() level |
36 (10%) worst case |
Stack used: 2 worst case (out of 8 total available) |
Lines Stmts % Files |
----- ----- --- ----- |
32 14 58 main.c |
20 0 0 main.h |
423 0 0 C:\Program Files (x86)\PICC\devices\16F887.h |
8 0 0 ..\LTS01.h |
17 10 42 ..\LTS01.c |
----- ----- |
500 24 Total |
Page ROM % RAM Vol Diff Functions: |
---- --- --- --- --- ---- ---------- |
0 22 2 1 @delay_ms1 |
0 69 7 3 @I2C_READ_1 |
0 74 7 1 @I2C_WRITE_1 |
0 164 16 4 282 3.6 LTS01_get_temp |
Inline 2 @ITOF |
0 117 11 13 799 4.4 @MULFF |
0 169 16 4 354 2.7 MAIN |
0 21 2 0 @const83 |
0 72 7 3 @PSTRINGC7_9600_62_63 |
0 14 1 0 @const85 |
Inline 5 @FTOSD |
0 66 6 13 @DIV3232 |
0 237 23 13 @PRINTF_L32D_9600_62_63FPFPF |
Program metrics: |
Functions 3 |
Statements 24 |
Comments 88 |
Volume (V) 1834 |
Difficilty (D) 10.0 |
Effort to implement (E) 18371 |
Time to implement (T) 17 minutes |
Est Delivered Bugs (B) 0 |
Cyclomatic Complexity 1 |
Maintainability (MI) 147 |
Segment Used Free |
----------- ---- ---- |
00000-00003 4 0 |
00004-007FF 1025 1019 |
00800-00FFF 0 2048 |
01000-017FF 0 2048 |
01800-01FFF 0 2048 |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.sym |
---|
0,0 → 1,114 |
004 @WRITE_PROGRAM_MEMORY8.P1 |
004-005 @READ_PROGRAM_MEMORY8.P2 |
015 CCP_1_LOW |
015 CCP_1 |
016 CCP_1_HIGH |
01B CCP_2 |
01B CCP_2_LOW |
01C CCP_2_HIGH |
020 @TRIS_C |
021 LTS01_get_temp.MSB |
021 MAIN.@SCRATCH1 |
021 @PSTRINGC7_9600_62_63.@SCRATCH1 |
022 @delay_ms1.P1 |
022 LTS01_get_temp.LSB |
022 MAIN.@SCRATCH2 |
022 @PSTRINGC7_9600_62_63.@SCRATCH2 |
023 @I2C_WRITE_1.P1 |
023 @I2C_READ_1.P2 |
023 LTS01_get_temp.@SCRATCH1 |
023 MAIN.@SCRATCH3 |
023 @PSTRINGC7_9600_62_63.@SCRATCH3 |
024 @I2C_READ_1.@SCRATCH1 |
024 LTS01_get_temp.@SCRATCH2 |
024 MAIN.@SCRATCH4 |
025-026 @ITOF.P1 |
025-028 @PRINTF_L32D_9600_62_63FPFPF.P2 |
025 @I2C_READ_1.@SCRATCH2 |
029 @PRINTF_L32D_9600_62_63FPFPF.P1 |
02A @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH1 |
02B @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH2 |
02C @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH3 |
02D @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH4 |
02E @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH5 |
02F @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH6 |
030 @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH7 |
031 @PRINTF_L32D_9600_62_63FPFPF.@SCRATCH8 |
032-035 @MULFF.P1 |
032-035 @DIV3232.P2 |
032-035 @FTOSD.P3 |
036-039 @MULFF.P1 |
036-039 @DIV3232.P2 |
036 @FTOSD.@SCRATCH1 |
03A @MULFF.@SCRATCH1 |
03A @DIV3232.@SCRATCH1 |
03B @MULFF.@SCRATCH2 |
03B @DIV3232.@SCRATCH2 |
03C @MULFF.@SCRATCH3 |
03C @DIV3232.@SCRATCH3 |
03D @MULFF.@SCRATCH4 |
03D @DIV3232.@SCRATCH4 |
03E @MULFF.@SCRATCH5 |
03E @DIV3232.@SCRATCH5 |
077 @SCRATCH |
078 @SCRATCH |
078 _RETURN_ |
079 @SCRATCH |
07A @SCRATCH |
107.6 C1OUT |
108.6 C2OUT |
10D-10E @READ_PROGRAM_MEMORY8.P1 |
10D-10E @WRITE_PROGRAM_MEMORY8.P2 |
ROM Allocation: |
0346 @delay_ms1 |
00B9 @I2C_READ_1 |
006F @I2C_WRITE_1 |
0173 LTS01_get_temp |
01EA @ITOF |
00FE @MULFF |
035C MAIN |
0004 @const83 |
0027 @PSTRINGC7_9600_62_63 |
0019 @const85 |
0280 @FTOSD |
0217 @DIV3232 |
0259 @PRINTF_L32D_9600_62_63FPFPF |
035C @cinit |
User Memory space: |
User Memory space: |
Project Directory: |
Z:\home\kaklik\svnMLAB\Modules\Sensors\LTS01A\SW\PIC16F887\ |
Project Files: |
main.c |
main.h |
C:\Program Files (x86)\PICC\devices\16F887.h |
..\LTS01.h |
..\LTS01.c |
Units: |
Z:\home\kaklik\svnMLAB\Modules\Sensors\LTS01A\SW\PIC16F887\main (main) |
Compiler Settings: |
Processor: PIC16F887 |
Pointer Size: 16 |
ADC Range: 0-255 |
Opt Level: 9 |
Short,Int,Long: UNSIGNED: 1,8,16 |
Float,Double: 32,32 |
Output Files: |
Errors: main.err |
Ext Symbols: main.esym |
INHX8: main.hex |
Symbols: main.sym |
List: main.lst |
Debug/COFF: main.cof |
Project: main.PJT |
Call Tree: main.tre |
Statistics: main.sta |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.tre |
---|
0,0 → 1,19 |
ÀÄmain |
ÀÄMAIN 0/169 Ram=4 |
ÃÄ??0?? |
ÃÄ@PSTRINGC7_9600_62_63 0/72 Ram=3 |
ÃÄ@PSTRINGC7_9600_62_63 0/72 Ram=3 |
ÃÄLTS01_get_temp 0/164 Ram=4 |
³ ÃÄ@I2C_WRITE_1 0/74 Ram=1 |
³ ÃÄ@I2C_WRITE_1 0/74 Ram=1 |
³ ÃÄ@I2C_WRITE_1 0/74 Ram=1 |
³ ÃÄ@I2C_READ_1 0/69 Ram=3 |
³ ÃÄ@I2C_READ_1 0/69 Ram=3 |
³ ÃÄ@ITOF (Inline) Ram=2 |
³ ÀÄ@MULFF 0/117 Ram=13 |
ÃÄ@PRINTF_L32D_9600_62_63FPFPF 0/237 Ram=13 |
³ ÃÄ@MULFF 0/117 Ram=13 |
³ ÃÄ@FTOSD (Inline) Ram=5 |
³ ÃÄ@DIV3232 0/66 Ram=13 |
³ ÀÄ@DIV3232 0/66 Ram=13 |
ÀÄ@delay_ms1 0/22 Ram=1 |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.bak |
---|
0,0 → 1,50 |
#include "D:\Honza\MLAB\Modules\Sensors\LTS01A\SW\PIC16F887\main.h" |
#define S_SDA PIN_C3 |
#define S_SCL PIN_C4 |
#use i2c(master, sda=S_SDA, scl=S_SCL) |
#use rs232(baud=9600,parity=N,xmit=PIN_B3,rcv=PIN_B2,bits=8) //rcv TXD xmit RXD |
void main() |
{ |
setup_adc_ports(NO_ANALOGS|VSS_VDD); |
setup_adc(ADC_CLOCK_DIV_2); |
setup_spi(SPI_SS_DISABLED); |
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
setup_timer_1(T1_DISABLED); |
setup_timer_2(T2_DISABLED,0,1); |
setup_ccp1(CCP_OFF); |
setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
printf("Simple Thermomether \r\n",); |
printf("(c) MLAB 2013 JACHO \r\n",); |
signed int8 MSB; |
byte LSB; |
float t; |
while(TRUE) |
{ |
i2c_start(); |
I2C_Write(0x9E); |
I2C_write(0x00); |
i2c_stop(); |
i2c_start(); |
I2C_Write(0x9F); |
MSB=i2c_read(1); |
LSB=i2c_read(0); |
i2c_stop(); |
t = (float)(LSB)/256.0; |
t = (float)(MSB+t); |
printf("Teplota: %f (C)\r\n", t); |
delay_ms(500); |
} |
} |
/Modules/Sensors/LTS01A/SW/PIC16F887/main.h |
---|
0,0 → 1,19 |
#include <16F887.h> |
#device adc=8 |
#FUSES NOWDT //No Watch Dog Timer |
#FUSES INTRC //Internal RC Osc |
#FUSES NOPUT //No Power Up Timer |
#FUSES MCLR //Master Clear pin enabled |
#FUSES NOPROTECT //Code not protected from reading |
#FUSES NOCPD //No EE protection |
#FUSES NOBROWNOUT //No brownout reset |
#FUSES IESO //Internal External Switch Over mode enabled |
#FUSES FCMEN //Fail-safe clock monitor enabled |
#FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O |
#FUSES NODEBUG //No Debug mode for ICD |
#FUSES NOWRT //Program memory not write protected |
#FUSES BORV40 //Brownout reset at 4.0V |
#use delay(clock=8000000) |