Problem with comparison.
| /Modules/Sensors/MAG01A/CAM_PROFI/V2.gpi |
|---|
| 0,0 → 1,48 |
| Generated by EAGLE CAM Processor 6.1.0 |
| Photoplotter Info File: D:/Honza/MLAB/Modules/Sensors/MAG01A/CAM_PROFI/V2.gpi |
| Date : 2.10.2012 18:16:37 |
| Plotfile : D:/Honza/MLAB/Modules/Sensors/MAG01A/CAM_PROFI/V2.PHO |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| Parameter settings: |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| Plotfile Info: |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| Apertures used: |
| Code Shape Size used |
| D10 draw 0.0039inch 2 |
| D11 draw 0.0040inch 21 |
| D12 rectangle 0.0110inch x 0.0256inch 8 |
| D13 rectangle 0.0256inch x 0.0110inch 8 |
| D14 rectangle 0.0512inch x 0.0591inch 8 |
| D15 rectangle 0.0591inch x 0.0512inch 2 |
| D16 square 0.0650inch 10 |
| D17 round 0.2540inch 4 |
| D18 rectangle 0.0710inch x 0.0630inch 2 |
| D19 draw 0.0100inch 711 |
| D20 draw 0.0120inch 7 |
| D21 draw 0.0160inch 13 |