No changes between revisions
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.bak |
---|
0,0 → 1,20 |
#include "C:\Users\Honza\Documents\pic\I2C_vlhkost\main.h" |
void main() |
{ |
setup_adc_ports(NO_ANALOGS|VSS_VDD); |
setup_adc(ADC_CLOCK_DIV_2); |
setup_spi(SPI_SS_DISABLED); |
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
setup_timer_1(T1_DISABLED); |
setup_timer_2(T2_DISABLED,0,1); |
setup_ccp1(CCP_OFF); |
setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
//TODO: User Code |
} |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.c |
---|
0,0 → 1,81 |
#include "C:\Users\Honza\Documents\pic\I2C_vlhkost\main.h" |
#define EEPROM_SDA PIN_B0 |
#define EEPROM_SCL PIN_B1 |
#use i2c(master, sda=EEPROM_SDA, scl=EEPROM_SCL) |
#use rs232(baud=9600,parity=N,xmit=PIN_B3,rcv=PIN_B2,bits=8) //rcv TXD xmit RXD |
void main() |
{ |
setup_adc_ports(NO_ANALOGS|VSS_VDD); |
setup_adc(ADC_CLOCK_DIV_2); |
setup_spi(SPI_SS_DISABLED); |
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
setup_timer_1(T1_DISABLED); |
setup_timer_2(T2_DISABLED,0,1); |
setup_ccp1(CCP_OFF); |
setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
printf("Simple Thermomether \r\n",); |
int16 data1, data2, data3; |
int XL,XH,YL,YH,ZL,ZH; |
while(TRUE) |
{ |
data1=0; |
data2=0 ; |
//akcelerometr |
int1 ack; |
i2c_start(); // If the write command is acknowledged, |
ack = i2c_write(0x81);//hen the device is ready. |
i2c_stop(); |
ack=!ack; |
i2c_stop(); //T |
i2c_start(); |
I2C_Write(0x80); |
I2C_write(0xF3); |
// i2c_stop(); |
i2c_start(); |
I2C_Write(0x81); |
XH=i2c_read(0); |
XL=i2c_read(0); |
i2c_stop(); |
i2c_start(); //RH |
I2C_Write(0x80); |
I2C_write(0xF5); |
// i2c_stop(); |
i2c_start(); |
I2C_Write(0x81); |
YH=i2c_read(0); |
YL=i2c_read(0); |
i2c_stop(); |
data1 = (((unsigned int16) XH << 8) + XL>>2 ); |
data2 = (((unsigned int16) YH << 8) + YL>>2); |
printf("Stav: %d (procenta)\r\n", ack); |
printf("Stav: %Ld(procenta)\r\n", data1); |
printf("Stav: %Ld(procenta)\r\n", data2); |
delay_ms (2000); |
} |
} |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.cof |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.err |
---|
0,0 → 1,5 |
>>> Warning 202 "main.c" Line 23(21,26): Variable never used: data3 |
>>> Warning 202 "main.c" Line 25(17,19): Variable never used: ZL |
>>> Warning 202 "main.c" Line 25(20,22): Variable never used: ZH |
Memory usage: ROM=12% RAM=2% - 8% |
0 Errors, 3 Warnings. |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.esym |
---|
0,0 → 1,428 |
D G "__PCM__" 0 98 ""4.106"" |
D G "__DEVICE__" 0 98 "887" |
D G "__DATE__" 0 98 ""03-4-13"" |
D G "__TIME__" 0 98 ""09:45:34"" "Standard Header file for the PIC16F887 device ////////////////" |
d G "PIN_A0" 2 20 "40" |
d G "PIN_A1" 2 21 "41" |
d G "PIN_A2" 2 22 "42" |
d G "PIN_A3" 2 23 "43" |
d G "PIN_A4" 2 24 "44" |
d G "PIN_A5" 2 25 "45" |
d G "PIN_A6" 2 26 "46" |
d G "PIN_A7" 2 27 "47" |
d G "PIN_B0" 2 29 "48" |
d G "PIN_B1" 2 30 "49" |
d G "PIN_B2" 2 31 "50" |
d G "PIN_B3" 2 32 "51" |
d G "PIN_B4" 2 33 "52" |
d G "PIN_B5" 2 34 "53" |
d G "PIN_B6" 2 35 "54" |
d G "PIN_B7" 2 36 "55" |
d G "PIN_C0" 2 38 "56" |
d G "PIN_C1" 2 39 "57" |
d G "PIN_C2" 2 40 "58" |
d G "PIN_C3" 2 41 "59" |
d G "PIN_C4" 2 42 "60" |
d G "PIN_C5" 2 43 "61" |
d G "PIN_C6" 2 44 "62" |
d G "PIN_C7" 2 45 "63" |
d G "PIN_D0" 2 47 "64" |
d G "PIN_D1" 2 48 "65" |
d G "PIN_D2" 2 49 "66" |
d G "PIN_D3" 2 50 "67" |
d G "PIN_D4" 2 51 "68" |
d G "PIN_D5" 2 52 "69" |
d G "PIN_D6" 2 53 "70" |
d G "PIN_D7" 2 54 "71" |
d G "PIN_E0" 2 56 "72" |
d G "PIN_E1" 2 57 "73" |
d G "PIN_E2" 2 58 "74" |
d G "PIN_E3" 2 59 "75" |
d G "FALSE" 2 62 "0" |
d G "TRUE" 2 63 "1" |
d G "BYTE" 2 65 "int8" |
d G "BOOLEAN" 2 66 "int1" |
d G "getc" 2 68 "getch" |
d G "fgetc" 2 69 "getch" |
d G "getchar" 2 70 "getch" |
d G "putc" 2 71 "putchar" |
d G "fputc" 2 72 "putchar" |
d G "fgets" 2 73 "gets" |
d G "fputs" 2 74 "puts" |
d G "WDT_FROM_SLEEP" 2 79 "3" |
d G "WDT_TIMEOUT" 2 80 "11" |
d G "MCLR_FROM_SLEEP" 2 81 "19" |
d G "MCLR_FROM_RUN" 2 82 "27" |
d G "NORMAL_POWER_UP" 2 83 "25" |
d G "BROWNOUT_RESTART" 2 84 "26" |
d G "T0_INTERNAL" 2 91 "0" |
d G "T0_EXT_L_TO_H" 2 92 "32" |
d G "T0_EXT_H_TO_L" 2 93 "48" |
d G "T0_DIV_1" 2 95 "8" |
d G "T0_DIV_2" 2 96 "0" |
d G "T0_DIV_4" 2 97 "1" |
d G "T0_DIV_8" 2 98 "2" |
d G "T0_DIV_16" 2 99 "3" |
d G "T0_DIV_32" 2 100 "4" |
d G "T0_DIV_64" 2 101 "5" |
d G "T0_DIV_128" 2 102 "6" |
d G "T0_DIV_256" 2 103 "7" |
d G "T0_8_BIT" 2 106 "0" |
d G "RTCC_INTERNAL" 2 108 "0" "The following are provided for compatibility" |
d G "RTCC_EXT_L_TO_H" 2 109 "32" "with older compiler versions" |
d G "RTCC_EXT_H_TO_L" 2 110 "48" |
d G "RTCC_DIV_1" 2 111 "8" |
d G "RTCC_DIV_2" 2 112 "0" |
d G "RTCC_DIV_4" 2 113 "1" |
d G "RTCC_DIV_8" 2 114 "2" |
d G "RTCC_DIV_16" 2 115 "3" |
d G "RTCC_DIV_32" 2 116 "4" |
d G "RTCC_DIV_64" 2 117 "5" |
d G "RTCC_DIV_128" 2 118 "6" |
d G "RTCC_DIV_256" 2 119 "7" |
d G "RTCC_8_BIT" 2 120 "0" |
d G "WDT_18MS" 2 132 "8" |
d G "WDT_36MS" 2 133 "9" |
d G "WDT_72MS" 2 134 "10" |
d G "WDT_144MS" 2 135 "11" |
d G "WDT_288MS" 2 136 "12" |
d G "WDT_576MS" 2 137 "13" |
d G "WDT_1152MS" 2 138 "14" |
d G "WDT_2304MS" 2 139 "15" |
d G "WDT_ON" 2 143 "0x4100" |
d G "WDT_OFF" 2 144 "0" |
d G "WDT_DIV_16" 2 145 "0x100" |
d G "WDT_DIV_8" 2 146 "0x300" |
d G "WDT_DIV_4" 2 147 "0x500" |
d G "WDT_DIV_2" 2 148 "0x700" |
d G "WDT_TIMES_1" 2 149 "0x900" "Default" |
d G "WDT_TIMES_2" 2 150 "0xB00" |
d G "WDT_TIMES_4" 2 151 "0xD00" |
d G "WDT_TIMES_8" 2 152 "0xF00" |
d G "WDT_TIMES_16" 2 153 "0x1100" |
d G "WDT_TIMES_32" 2 154 "0x1300" |
d G "WDT_TIMES_64" 2 155 "0x1500" |
d G "WDT_TIMES_128" 2 156 "0x1700" |
d G "T1_DISABLED" 2 162 "0" |
d G "T1_INTERNAL" 2 163 "5" |
d G "T1_EXTERNAL" 2 164 "7" |
d G "T1_EXTERNAL_SYNC" 2 165 "3" |
d G "T1_CLK_OUT" 2 167 "8" |
d G "T1_DIV_BY_1" 2 169 "0" |
d G "T1_DIV_BY_2" 2 170 "0x10" |
d G "T1_DIV_BY_4" 2 171 "0x20" |
d G "T1_DIV_BY_8" 2 172 "0x30" |
d G "T1_GATE" 2 174 "0x40" |
d G "T1_GATE_INVERTED" 2 175 "0xC0" |
d G "T2_DISABLED" 2 180 "0" |
d G "T2_DIV_BY_1" 2 181 "4" |
d G "T2_DIV_BY_4" 2 182 "5" |
d G "T2_DIV_BY_16" 2 183 "6" |
d G "CCP_OFF" 2 189 "0" |
d G "CCP_CAPTURE_FE" 2 190 "4" |
d G "CCP_CAPTURE_RE" 2 191 "5" |
d G "CCP_CAPTURE_DIV_4" 2 192 "6" |
d G "CCP_CAPTURE_DIV_16" 2 193 "7" |
d G "CCP_COMPARE_SET_ON_MATCH" 2 194 "8" |
d G "CCP_COMPARE_CLR_ON_MATCH" 2 195 "9" |
d G "CCP_COMPARE_INT" 2 196 "0xA" |
d G "CCP_COMPARE_RESET_TIMER" 2 197 "0xB" |
d G "CCP_PWM" 2 198 "0xC" |
d G "CCP_PWM_PLUS_1" 2 199 "0x1c" |
d G "CCP_PWM_PLUS_2" 2 200 "0x2c" |
d G "CCP_PWM_PLUS_3" 2 201 "0x3c" |
d G "CCP_PWM_H_H" 2 206 "0x0c" |
d G "CCP_PWM_H_L" 2 207 "0x0d" |
d G "CCP_PWM_L_H" 2 208 "0x0e" |
d G "CCP_PWM_L_L" 2 209 "0x0f" |
d G "CCP_PWM_FULL_BRIDGE" 2 211 "0x40" |
d G "CCP_PWM_FULL_BRIDGE_REV" 2 212 "0xC0" |
d G "CCP_PWM_HALF_BRIDGE" 2 213 "0x80" |
d G "CCP_SHUTDOWN_ON_COMP1" 2 215 "0x100000" |
d G "CCP_SHUTDOWN_ON_COMP2" 2 216 "0x200000" |
d G "CCP_SHUTDOWN_ON_COMP" 2 217 "0x300000" |
d G "CCP_SHUTDOWN_ON_INT0" 2 218 "0x400000" |
d G "CCP_SHUTDOWN_ON_COMP1_INT0" 2 219 "0x500000" |
d G "CCP_SHUTDOWN_ON_COMP2_INT0" 2 220 "0x600000" |
d G "CCP_SHUTDOWN_ON_COMP_INT0" 2 221 "0x700000" |
d G "CCP_SHUTDOWN_AC_L" 2 223 "0x000000" |
d G "CCP_SHUTDOWN_AC_H" 2 224 "0x040000" |
d G "CCP_SHUTDOWN_AC_F" 2 225 "0x080000" |
d G "CCP_SHUTDOWN_BD_L" 2 227 "0x000000" |
d G "CCP_SHUTDOWN_BD_H" 2 228 "0x010000" |
d G "CCP_SHUTDOWN_BD_F" 2 229 "0x020000" |
d G "CCP_SHUTDOWN_RESTART" 2 231 "0x80000000" |
d G "CCP_PULSE_STEERING_A" 2 233 "0x01000000" |
d G "CCP_PULSE_STEERING_B" 2 234 "0x02000000" |
d G "CCP_PULSE_STEERING_C" 2 235 "0x04000000" |
d G "CCP_PULSE_STEERING_D" 2 236 "0x08000000" |
d G "CCP_PULSE_STEERING_SYNC" 2 237 "0x10000000" |
d G "SPI_MASTER" 2 245 "0x20" |
d G "SPI_SLAVE" 2 246 "0x24" |
d G "SPI_L_TO_H" 2 247 "0" |
d G "SPI_H_TO_L" 2 248 "0x10" |
d G "SPI_CLK_DIV_4" 2 249 "0" |
d G "SPI_CLK_DIV_16" 2 250 "1" |
d G "SPI_CLK_DIV_64" 2 251 "2" |
d G "SPI_CLK_T2" 2 252 "3" |
d G "SPI_SS_DISABLED" 2 253 "1" |
d G "SPI_SAMPLE_AT_END" 2 255 "0x8000" |
d G "SPI_XMIT_L_TO_H" 2 256 "0x4000" |
d G "UART_ADDRESS" 2 262 "2" |
d G "UART_DATA" 2 263 "4" |
d G "UART_AUTODETECT" 2 264 "8" |
d G "UART_AUTODETECT_NOWAIT" 2 265 "9" |
d G "UART_WAKEUP_ON_RDA" 2 266 "10" |
d G "UART_SEND_BREAK" 2 267 "13" |
d G "NC_NC_NC_NC" 2 273 "0x00" |
d G "NC_NC" 2 274 "0x00" |
d G "CP1_A0_A3" 2 277 "0x00090080" |
d G "CP1_A1_A3" 2 278 "0x000A0081" |
d G "CP1_B3_A3" 2 279 "0x00880082" |
d G "CP1_B1_A3" 2 280 "0x00280083" |
d G "CP1_A0_VREF" 2 281 "0x00010084" |
d G "CP1_A1_VREF" 2 282 "0x00020085" |
d G "CP1_B3_VREF" 2 283 "0x00800086" |
d G "CP1_B1_VREF" 2 284 "0x00200087" |
d G "CP1_OUT_ON_A4" 2 286 "0x00000020" |
d G "CP1_INVERT" 2 287 "0x00000010" |
d G "CP1_ABSOLUTE_VREF" 2 288 "0x20000000" |
d G "CP2_A0_A2" 2 291 "0x00058000" |
d G "CP2_A1_A2" 2 292 "0x00068100" |
d G "CP2_B3_A2" 2 293 "0x00848200" |
d G "CP2_B1_A2" 2 294 "0x00248300" |
d G "CP2_A0_VREF" 2 295 "0x00018400" |
d G "CP2_A1_VREF" 2 296 "0x00028500" |
d G "CP2_B3_VREF" 2 297 "0x00808600" |
d G "CP2_B1_VREF" 2 298 "0x00208700" |
d G "CP2_OUT_ON_A5" 2 300 "0x00002000" |
d G "CP2_INVERT" 2 301 "0x00001000" |
d G "CP2_ABSOLUTE_VREF" 2 302 "0x10000000" |
d G "CP2_T1_SYNC" 2 305 "0x01000000" |
d G "CP2_T1_GATE" 2 306 "0x02000000" |
d G "VREF_LOW" 2 315 "0xa0" |
d G "VREF_HIGH" 2 316 "0x80" |
d G "OSC_31KHZ" 2 322 "1" |
d G "OSC_125KHZ" 2 323 "0x11" |
d G "OSC_250KHZ" 2 324 "0x21" |
d G "OSC_500KHZ" 2 325 "0x31" |
d G "OSC_1MHZ" 2 326 "0x41" |
d G "OSC_2MHZ" 2 327 "0x51" |
d G "OSC_4MHZ" 2 328 "0x61" |
d G "OSC_8MHZ" 2 329 "0x71" |
d G "OSC_INTRC" 2 330 "1" |
d G "OSC_NORMAL" 2 331 "0" |
d G "OSC_STATE_STABLE" 2 333 "4" |
d G "OSC_31KHZ_STABLE" 2 334 "2" |
d G "ADC_OFF" 2 342 "0" "ADC Off" |
d G "ADC_CLOCK_DIV_2" 2 343 "0x100" |
d G "ADC_CLOCK_DIV_8" 2 344 "0x40" |
d G "ADC_CLOCK_DIV_32" 2 345 "0x80" |
d G "ADC_CLOCK_INTERNAL" 2 346 "0xc0" "Internal 2-6us" |
d G "sAN0" 2 350 "1" "| A0" |
d G "sAN1" 2 351 "2" "| A1" |
d G "sAN2" 2 352 "4" "| A2" |
d G "sAN3" 2 353 "8" "| A3" |
d G "sAN4" 2 354 "16" "| A5" |
d G "sAN5" 2 355 "32" "| E0" |
d G "sAN6" 2 356 "64" "| E1" |
d G "sAN7" 2 357 "128" "| E2" |
d G "sAN8" 2 358 "0x10000" "| B2" |
d G "sAN9" 2 359 "0x20000" "| B3" |
d G "sAN10" 2 360 "0x40000" "| B1" |
d G "sAN11" 2 361 "0x80000" "| B4" |
d G "sAN12" 2 362 "0x100000" "| B0" |
d G "sAN13" 2 363 "0x200000" "| B5" |
d G "NO_ANALOGS" 2 364 "0" "None" |
d G "ALL_ANALOG" 2 365 "0x1F00FF" "A0 A1 A2 A3 A5 E0 E1 E2 B0 B1 B2 B3 B4 B5" |
d G "VSS_VDD" 2 368 "0x0000" "| Range 0-Vdd" |
d G "VSS_VREF" 2 369 "0x1000" "| Range 0-Vref" |
d G "VREF_VREF" 2 370 "0x3000" "| Range Vref-Vref" |
d G "VREF_VDD" 2 371 "0x2000" "| Range Vref-Vdd" |
d G "ADC_START_AND_READ" 2 375 "7" "This is the default if nothing is specified" |
d G "ADC_START_ONLY" 2 376 "1" |
d G "ADC_READ_ONLY" 2 377 "6" |
d G "L_TO_H" 2 389 "0x40" |
d G "H_TO_L" 2 390 "0" |
d G "GLOBAL" 2 392 "0x0BC0" |
d G "INT_RTCC" 2 393 "0x000B20" |
d G "INT_RB" 2 394 "0x01FF0B08" |
d G "INT_EXT_L2H" 2 395 "0x50000B10" |
d G "INT_EXT_H2L" 2 396 "0x60000B10" |
d G "INT_EXT" 2 397 "0x000B10" |
d G "INT_AD" 2 398 "0x008C40" |
d G "INT_TBE" 2 399 "0x008C10" |
d G "INT_RDA" 2 400 "0x008C20" |
d G "INT_TIMER1" 2 401 "0x008C01" |
d G "INT_TIMER2" 2 402 "0x008C02" |
d G "INT_CCP1" 2 403 "0x008C04" |
d G "INT_CCP2" 2 404 "0x008D01" |
d G "INT_SSP" 2 405 "0x008C08" |
d G "INT_BUSCOL" 2 406 "0x008D08" |
d G "INT_EEPROM" 2 407 "0x008D10" |
d G "INT_TIMER0" 2 408 "0x000B20" |
d G "INT_OSC_FAIL" 2 409 "0x008D80" |
d G "INT_COMP" 2 410 "0x008D20" |
d G "INT_COMP2" 2 411 "0x008D40" |
d G "INT_ULPWU" 2 412 "0x008D04" |
d G "INT_RB0" 2 413 "0x0010B08" |
d G "INT_RB1" 2 414 "0x0020B08" |
d G "INT_RB2" 2 415 "0x0040B08" |
d G "INT_RB3" 2 416 "0x0080B08" |
d G "INT_RB4" 2 417 "0x0100B08" |
d G "INT_RB5" 2 418 "0x0200B08" |
d G "INT_RB6" 2 419 "0x0400B08" |
d G "INT_RB7" 2 420 "0x0800B08" |
D G "EEPROM_SDA" 0 3 "PIN_B0" |
D G "EEPROM_SCL" 0 4 "PIN_B1" |
F G "main" 0 9 "void()" |
C L "main" 0 19 1 "FUNCTION" |
V L "data1" 0 23 "int16" |
V L "data2" 0 23 "int16" |
V L "data3" 0 23 "int16" |
V L "XL" 0 25 "int8" |
V L "XH" 0 25 "int8" |
V L "YL" 0 25 "int8" |
V L "YH" 0 25 "int8" |
V L "ZL" 0 25 "int8" |
V L "ZH" 0 25 "int8" |
C L "main" 0 19 1 "FUNCTION" |
V L "ack" 0 35 "int1" |
C L "main" 0 19 1 "FUNCTION" |
C L "main" 0 19 1 "FUNCTION" |
C L "main" 0 19 1 "FUNCTION" |
C L "main" 0 19 1 "FUNCTION" |
C L "main" 0 19 1 "FUNCTION" |
C L "main" 0 19 1 "FUNCTION" |
F B "reset_cpu" 0 0 |
F B "abs" 1 0 |
F B "sleep_ulpwu" 1 0 |
F B "sleep" 0 0 |
F B "delay_cycles" 1 0 |
F B "read_bank" 2 0 |
F B "write_bank" 3 0 |
F B "shift_left" 2 2 |
F B "shift_right" 2 2 |
F B "rotate_left" 2 0 |
F B "rotate_right" 2 0 |
F B "_mul" 2 0 |
F B "memset" 3 0 |
F B "isamoung" 2 0 |
F B "isamong" 2 0 |
F B "bit_set" 2 0 |
F B "bit_clear" 2 0 |
F B "bit_test" 2 0 |
F B "toupper" 1 0 |
F B "tolower" 1 0 |
F B "swap" 1 0 |
F B "printf" 1 255 |
F B "fprintf" 1 255 |
F B "sprintf" 1 255 |
F B "make8" 2 0 |
F B "make16" 2 0 |
F B "make32" 1 255 |
F B "label_address" 1 1 |
F B "goto_address" 1 0 |
F B "_va_arg" 1 0 |
F B "offsetofbit" 2 2 |
F B "enable_interrupts" 1 0 |
F B "disable_interrupts" 1 0 |
F B "interrupt_active" 1 0 |
F B "clear_interrupt" 1 0 |
F B "jump_to_isr" 1 0 |
F B "ext_int_edge" 1 2 |
F B "read_eeprom" 1 0 |
F B "write_eeprom" 2 0 |
F B "read_program_eeprom" 1 0 |
F B "write_program_eeprom" 2 0 |
F B "write_program_memory" 4 0 |
F B "write_program_memory8" 4 0 |
F B "read_program_memory" 4 0 |
F B "read_program_memory8" 4 0 |
F B "erase_program_eeprom" 1 0 |
F B "strcpy" 2 0 |
F B "memcpy" 3 0 |
F B "strstr100" 2 0 |
F B "output_high" 1 0 |
F B "output_low" 1 0 |
F B "input" 1 0 |
F B "input_state" 1 0 |
F B "output_float" 1 0 |
F B "output_drive" 1 0 |
F B "output_bit" 1 1 |
F B "output_toggle" 1 0 |
F B "output_a" 1 0 |
F B "output_b" 1 0 |
F B "output_c" 1 0 |
F B "output_d" 1 0 |
F B "output_e" 1 0 |
F B "input_a" 0 0 |
F B "input_b" 0 0 |
F B "input_c" 0 0 |
F B "input_d" 0 0 |
F B "input_e" 0 0 |
F B "set_tris_a" 1 0 |
F B "set_tris_b" 1 0 |
F B "set_tris_c" 1 0 |
F B "set_tris_d" 1 0 |
F B "set_tris_e" 1 0 |
F B "get_tris_a" 0 0 |
F B "get_tris_b" 0 0 |
F B "get_tris_c" 0 0 |
F B "get_tris_d" 0 0 |
F B "get_tris_e" 0 0 |
F B "input_change_a" 0 0 |
F B "input_change_b" 0 0 |
F B "input_change_c" 0 0 |
F B "input_change_d" 0 0 |
F B "input_change_e" 0 0 |
F B "port_b_pullups" 1 0 |
F B "setup_counters" 2 0 |
F B "setup_wdt" 1 0 |
F B "restart_cause" 0 0 |
F B "restart_wdt" 0 0 |
F B "get_rtcc" 0 0 |
F B "set_rtcc" 1 0 |
F B "get_timer0" 0 0 |
F B "set_timer0" 1 0 |
F B "setup_comparator" 1 0 |
F B "setup_port_a" 1 0 |
F B "setup_adc_ports" 1 0 |
F B "setup_adc" 1 0 |
F B "set_adc_channel" 1 0 |
F B "read_adc" 0 1 |
F B "adc_done" 0 0 |
F B "setup_timer_0" 1 0 |
F B "setup_vref" 1 0 |
F B "setup_timer_1" 1 0 |
F B "get_timer1" 0 0 |
F B "set_timer1" 1 0 |
F B "setup_timer_2" 3 0 |
F B "get_timer2" 0 0 |
F B "set_timer2" 1 0 |
F B "setup_ccp1" 1 2 |
F B "set_pwm1_duty" 1 0 |
F B "setup_ccp2" 1 0 |
F B "set_pwm2_duty" 1 0 |
F B "setup_oscillator" 1 2 |
F B "setup_spi" 1 0 |
F B "spi_read" 0 1 |
F B "spi_write" 1 0 |
F B "spi_data_is_in" 0 0 |
F B "setup_spi2" 1 0 |
F B "spi_read2" 0 1 |
F B "spi_write2" 1 0 |
F B "spi_data_is_in2" 0 0 |
F B "brownout_enable" 1 0 |
F B "delay_ms" 1 0 |
F B "delay_us" 1 0 |
F B "i2c_read" 0 2 |
F B "i2c_write" 1 2 |
F B "i2c_start" 0 2 |
F B "i2c_stop" 0 1 |
F B "i2c_isr_state" 0 1 |
F B "putchar" 1 2 |
F B "puts" 1 2 |
F B "getch" 0 1 |
F B "gets" 1 3 |
F B "kbhit" 0 1 |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.h |
---|
0,0 → 1,19 |
#include <16F887.h> |
#device adc=8 |
#FUSES NOWDT //No Watch Dog Timer |
#FUSES INTRC //Internal RC Osc |
#FUSES NOPUT //No Power Up Timer |
#FUSES MCLR //Master Clear pin enabled |
#FUSES NOPROTECT //Code not protected from reading |
#FUSES NOCPD //No EE protection |
#FUSES NOBROWNOUT //No brownout reset |
#FUSES IESO //Internal External Switch Over mode enabled |
#FUSES FCMEN //Fail-safe clock monitor enabled |
#FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O |
#FUSES NODEBUG //No Debug mode for ICD |
#FUSES NOWRT //Program memory not write protected |
#FUSES BORV40 //Brownout reset at 4.0V |
#use delay(clock=8000000) |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.hex |
---|
0,0 → 1,132 |
:1000000002308A00632A0000D3346D38EC32202A93 |
:10001000E832F236EF36653AE8327210A0060A008E |
:10002000533A613B3A10253220147039EF3165376D |
:10003000F430A9060A00533A613B3A1025266414AD |
:100040007039EF316537F430A9060A00533A613B45 |
:100050003A10252664147039EF316537F430A9065B |
:100060000A0083168611831286110830F80038289A |
:100070000000F8174928F813B70C03188615031C5D |
:100080008611781749287813F80B3C284728000078 |
:1000900086153F308400840B4B280000F81B3B285A |
:1000A000781B43280800831603178C170C140000D4 |
:1000B000000083120C087F39031997280313AE0040 |
:1000C00003170D080313AF0003170F080313B00045 |
:1000D0002E08B70031202F0803178D0003133008B6 |
:1000E00003178F0083168C170C1400000000831276 |
:1000F0000C0D0E0D7F39031997280313AE0003175B |
:100100000D080313AF0003170F080313B0002E08E8 |
:10011000B70031202F0803178D0003133008031791 |
:100120008F008D0A03198F0A031353280317031333 |
:100130008A110A12CB2A0830F800000086108316B4 |
:10014000861000008312AE0D0610031CAA28831629 |
:10015000061483120318AF28831606108312831621 |
:1001600086148312861CB228F80B9D280000861086 |
:100170008316861000000614000000008614831207 |
:10018000861CC028F8010000061878148610831613 |
:10019000861083120610831606108312080008309A |
:1001A000AF007708B000831606140000861483128F |
:1001B000861CD82806180314061C0310F80D00002E |
:1001C0008316861083128610AF0BD328831606146D |
:1001D00000008312061030080319F1288316061058 |
:1001E00083120000831686148312861CF5280000F3 |
:1001F00086108316861000008312061083160610E0 |
:1002000083120800831603178C170C1400000000DB |
:100210000318312983120C087F390313B000031728 |
:100220000D080313B10003170F080313B2003008C1 |
:10023000B7003120310803178D000313320803176C |
:100240008F0083168C170C14000000008312031318 |
:10025000AF0B2B292E29831603173129502983161A |
:10026000031783120C0D0E0D7F390313B000031713 |
:100270000D080313B10003170F080313B200300871 |
:10028000B7003120310803178D000313320803171C |
:100290008F008D0A03198F0A03100313AF0B022975 |
:1002A00008003608F8013502031859293508F70007 |
:1002B0006529F7010830B700B50DF70D360877024C |
:1002C0000318F700F80DB70B5C2908002030301E2A |
:1002D0003030B1002F08F700AF1F7529F709F70A72 |
:1002E0007708AF002D30B100B0172F08B50064308B |
:1002F000B60051217708AF0030307807B2002F08E0 |
:10030000B5000A30B600512130307707B4003030E4 |
:100310007807B3003108F700B01D9029B01F3011E5 |
:10032000301A9D29B01FB8293019B8297708B200B2 |
:10033000B018B8297708B300B82930303202031D4D |
:10034000B8297708B2002030B100B01DAB293011B8 |
:10035000B014B01FB01030303302031DB829770835 |
:10036000B3002030B200B01DAB29B010B01F301068 |
:10037000301DBD293108B7003120B01CC229320818 |
:10038000B7003120301CC7293308B70031203408AA |
:10039000B70031208A110A12B22BB6010408B50049 |
:1003A0003610831B3614AF1FDD29B517351EB50A6D |
:1003B000AE09AF09AE0A0319AF0A2F0EF038B1002B |
:1003C000B107E23EB200323EB4002F080F39B20747 |
:1003D000B207B407E93EB300B307B3072E0E0F39D7 |
:1003E000B307B407B30DB40DB409B40D2E080F391B |
:1003F000B407B10D0730B0000A30B407B303031CD3 |
:10040000FD29B307B203031C012AB207B103031C81 |
:10041000052AB107B003031C092A30308400831376 |
:1004200007303505351384033505031D1E2A351A9B |
:10043000840A351A1E2A2030F7003B2A84073430FC |
:100440000402031935170008F700031D2F2A351B76 |
:100450002F2A351A492AB5192F2A20303A2AB51FD2 |
:10046000372A2D30F70084033513B5133B2AB51511 |
:1004700035123030F707AF010408AE002F10831B90 |
:100480002F147708B70031202E08840083132F180B |
:100490008317840A351F1F2A08002F308400831316 |
:1004A00000080319602A0230F800F701F70B562AFA |
:1004B000F80B552A9730F700F70B5C2A800B532A6C |
:1004C0008A110A12F72B840183131F3083057130C0 |
:1004D00083168F000F088611831286158316031763 |
:1004E0000908C039890003131F129F120030031737 |
:1004F00088008312870188018901FF300313A0005F |
:10050000831603170908C039890003131F129F12AD |
:10051000003003178800831203131F139F138316E1 |
:100520009F1383121F149412A012200883168700B1 |
:10053000831220162008831687008312A01120083A |
:1005400083168700013083129400003083169400D4 |
:100550000108C73908388100831290010030F80083 |
:100560009200003083169200831220152008831613 |
:1005700087008312970183169B019C0101309D0027 |
:100580008312031787018801890104308D00003030 |
:100590008F0003135328A201A101A401A301831614 |
:1005A000061400008614000083120610831606103D |
:1005B0000000831286108316861081308312AE00ED |
:1005C0009B2078082D1078182D1483160610000033 |
:1005D00086148312861CEA2A0000EE2A0000831685 |
:1005E0000614000001308312AD06831606100000C9 |
:1005F00086148312861CFA2A0000FE2A0000831645 |
:100600000614000006140000861400008312061071 |
:100610008316061000008312861083168610803021 |
:100620008312AE009B20F330AE009B20831606148D |
:100630000000861400008312861C1C2B06108316F3 |
:1006400006100000831286108316861081308312F4 |
:10065000AE009B20F701CF207808A800F701CF203B |
:100660007808A70083160610000086148312861CE3 |
:10067000372B00003B2B00008316061400000614E5 |
:100680000000861400008312061083160610000076 |
:10069000831286108316861080308312AE009B2052 |
:1006A000F530AE009B20831606140000861400006F |
:1006B0008312861C592B0610831606100000831225 |
:1006C00086108316861081308312AE009B20F701BE |
:1006D000CF207808AA00F701CF207808A900831658 |
:1006E0000610000086148312861C742B0000782BE1 |
:1006F00000008316061400008312AF012808AE0024 |
:10070000AF00AE012708AE070318AF0A2F0CA200F6 |
:100710002E0CA100A20CA10C3F30A205AF012A08AB |
:10072000AE00AF00AE012908AE070318AF0A2F0CC8 |
:10073000A4002E0CA300A40CA30C3F30A405003091 |
:100740002D180130AE00103003178D0000308F00DF |
:10075000031006300313AF0002212E08AF001F3034 |
:10076000B0006629143003178D0000308F0003108D |
:100770000D300313AF0002211B3003178D00003032 |
:100780008F00031006300313AF00022110308400E5 |
:100790002208AF002108AE00CD211F3003178D00C5 |
:1007A00000308F0003140C300313AF0002212630F9 |
:1007B00003178D0000308F00031006300313AF00C5 |
:1007C0000221103084002408AF002308AE00CD21A0 |
:1007D0002A3003178D0000308F0003140C300313F0 |
:1007E000AF0002210830AE00FA30AF004D2AAE0B48 |
:0607F000F42BCB2A63008C |
:04400E00F52CFF3F4F |
:00000001FF |
;PIC16F887 |
;CRC=524E CREATED="03-4-13 09:45" |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.lst |
---|
0,0 → 1,693 |
CCS PCM C Compiler, Version 4.106, 47914 03-4-13 09:45 |
Filename: C:\Users\Honza\Documents\pic\I2C_vlhkost\main.lst |
ROM used: 1019 words (12%) |
Largest free fragment is 2048 |
RAM used: 8 (2%) at main() level |
29 (8%) worst case |
Stack: 2 locations |
* |
0000: MOVLW 02 |
0001: MOVWF 0A |
0002: GOTO 263 |
0003: NOP |
.................... #include "C:\Users\Honza\Documents\pic\I2C_vlhkost\main.h" |
.................... #include <16F887.h> |
.................... //////// Standard Header file for the PIC16F887 device //////////////// |
.................... #device PIC16F887 |
.................... #list |
.................... |
.................... #device adc=8 |
.................... |
.................... #FUSES NOWDT //No Watch Dog Timer |
.................... #FUSES INTRC //Internal RC Osc |
.................... #FUSES NOPUT //No Power Up Timer |
.................... #FUSES MCLR //Master Clear pin enabled |
.................... #FUSES NOPROTECT //Code not protected from reading |
.................... #FUSES NOCPD //No EE protection |
.................... #FUSES NOBROWNOUT //No brownout reset |
.................... #FUSES IESO //Internal External Switch Over mode enabled |
.................... #FUSES FCMEN //Fail-safe clock monitor enabled |
.................... #FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O |
.................... #FUSES NODEBUG //No Debug mode for ICD |
.................... #FUSES NOWRT //Program memory not write protected |
.................... #FUSES BORV40 //Brownout reset at 4.0V |
.................... |
.................... #use delay(clock=8000000) |
* |
024D: MOVLW 2F |
024E: MOVWF 04 |
024F: BCF 03.7 |
0250: MOVF 00,W |
0251: BTFSC 03.2 |
0252: GOTO 260 |
0253: MOVLW 02 |
0254: MOVWF 78 |
0255: CLRF 77 |
0256: DECFSZ 77,F |
0257: GOTO 256 |
0258: DECFSZ 78,F |
0259: GOTO 255 |
025A: MOVLW 97 |
025B: MOVWF 77 |
025C: DECFSZ 77,F |
025D: GOTO 25C |
025E: DECFSZ 00,F |
025F: GOTO 253 |
0260: BCF 0A.3 |
0261: BCF 0A.4 |
0262: GOTO 3F7 (RETURN) |
.................... |
.................... |
.................... |
.................... #define EEPROM_SDA PIN_B0 |
.................... #define EEPROM_SCL PIN_B1 |
.................... #use i2c(master, sda=EEPROM_SDA, scl=EEPROM_SCL) |
* |
009B: MOVLW 08 |
009C: MOVWF 78 |
009D: NOP |
009E: BCF 06.1 |
009F: BSF 03.5 |
00A0: BCF 06.1 |
00A1: NOP |
00A2: BCF 03.5 |
00A3: RLF 2E,F |
00A4: BCF 06.0 |
00A5: BTFSS 03.0 |
00A6: GOTO 0AA |
00A7: BSF 03.5 |
00A8: BSF 06.0 |
00A9: BCF 03.5 |
00AA: BTFSC 03.0 |
00AB: GOTO 0AF |
00AC: BSF 03.5 |
00AD: BCF 06.0 |
00AE: BCF 03.5 |
00AF: BSF 03.5 |
00B0: BSF 06.1 |
00B1: BCF 03.5 |
00B2: BTFSS 06.1 |
00B3: GOTO 0B2 |
00B4: DECFSZ 78,F |
00B5: GOTO 09D |
00B6: NOP |
00B7: BCF 06.1 |
00B8: BSF 03.5 |
00B9: BCF 06.1 |
00BA: NOP |
00BB: BSF 06.0 |
00BC: NOP |
00BD: NOP |
00BE: BSF 06.1 |
00BF: BCF 03.5 |
00C0: BTFSS 06.1 |
00C1: GOTO 0C0 |
00C2: CLRF 78 |
00C3: NOP |
00C4: BTFSC 06.0 |
00C5: BSF 78.0 |
00C6: BCF 06.1 |
00C7: BSF 03.5 |
00C8: BCF 06.1 |
00C9: BCF 03.5 |
00CA: BCF 06.0 |
00CB: BSF 03.5 |
00CC: BCF 06.0 |
00CD: BCF 03.5 |
00CE: RETURN |
00CF: MOVLW 08 |
00D0: MOVWF 2F |
00D1: MOVF 77,W |
00D2: MOVWF 30 |
00D3: BSF 03.5 |
00D4: BSF 06.0 |
00D5: NOP |
00D6: BSF 06.1 |
00D7: BCF 03.5 |
00D8: BTFSS 06.1 |
00D9: GOTO 0D8 |
00DA: BTFSC 06.0 |
00DB: BSF 03.0 |
00DC: BTFSS 06.0 |
00DD: BCF 03.0 |
00DE: RLF 78,F |
00DF: NOP |
00E0: BSF 03.5 |
00E1: BCF 06.1 |
00E2: BCF 03.5 |
00E3: BCF 06.1 |
00E4: DECFSZ 2F,F |
00E5: GOTO 0D3 |
00E6: BSF 03.5 |
00E7: BSF 06.0 |
00E8: NOP |
00E9: BCF 03.5 |
00EA: BCF 06.0 |
00EB: MOVF 30,W |
00EC: BTFSC 03.2 |
00ED: GOTO 0F1 |
00EE: BSF 03.5 |
00EF: BCF 06.0 |
00F0: BCF 03.5 |
00F1: NOP |
00F2: BSF 03.5 |
00F3: BSF 06.1 |
00F4: BCF 03.5 |
00F5: BTFSS 06.1 |
00F6: GOTO 0F5 |
00F7: NOP |
00F8: BCF 06.1 |
00F9: BSF 03.5 |
00FA: BCF 06.1 |
00FB: NOP |
00FC: BCF 03.5 |
00FD: BCF 06.0 |
00FE: BSF 03.5 |
00FF: BCF 06.0 |
0100: BCF 03.5 |
0101: RETURN |
.................... #use rs232(baud=9600,parity=N,xmit=PIN_B3,rcv=PIN_B2,bits=8) //rcv TXD xmit RXD |
* |
0031: BSF 03.5 |
0032: BCF 06.3 |
0033: BCF 03.5 |
0034: BCF 06.3 |
0035: MOVLW 08 |
0036: MOVWF 78 |
0037: GOTO 038 |
0038: NOP |
0039: BSF 78.7 |
003A: GOTO 049 |
003B: BCF 78.7 |
003C: RRF 37,F |
003D: BTFSC 03.0 |
003E: BSF 06.3 |
003F: BTFSS 03.0 |
0040: BCF 06.3 |
0041: BSF 78.6 |
0042: GOTO 049 |
0043: BCF 78.6 |
0044: DECFSZ 78,F |
0045: GOTO 03C |
0046: GOTO 047 |
0047: NOP |
0048: BSF 06.3 |
0049: MOVLW 3F |
004A: MOVWF 04 |
004B: DECFSZ 04,F |
004C: GOTO 04B |
004D: NOP |
004E: BTFSC 78.7 |
004F: GOTO 03B |
0050: BTFSC 78.6 |
0051: GOTO 043 |
0052: RETURN |
.................... |
.................... |
.................... void main() |
.................... { |
* |
0263: CLRF 04 |
0264: BCF 03.7 |
0265: MOVLW 1F |
0266: ANDWF 03,F |
0267: MOVLW 71 |
0268: BSF 03.5 |
0269: MOVWF 0F |
026A: MOVF 0F,W |
026B: BCF 06.3 |
026C: BCF 03.5 |
026D: BSF 06.3 |
026E: BSF 03.5 |
026F: BSF 03.6 |
0270: MOVF 09,W |
0271: ANDLW C0 |
0272: MOVWF 09 |
0273: BCF 03.6 |
0274: BCF 1F.4 |
0275: BCF 1F.5 |
0276: MOVLW 00 |
0277: BSF 03.6 |
0278: MOVWF 08 |
0279: BCF 03.5 |
027A: CLRF 07 |
027B: CLRF 08 |
027C: CLRF 09 |
.................... |
.................... setup_adc_ports(NO_ANALOGS|VSS_VDD); |
* |
0280: BSF 03.5 |
0281: BSF 03.6 |
0282: MOVF 09,W |
0283: ANDLW C0 |
0284: MOVWF 09 |
0285: BCF 03.6 |
0286: BCF 1F.4 |
0287: BCF 1F.5 |
0288: MOVLW 00 |
0289: BSF 03.6 |
028A: MOVWF 08 |
.................... setup_adc(ADC_CLOCK_DIV_2); |
028B: BCF 03.5 |
028C: BCF 03.6 |
028D: BCF 1F.6 |
028E: BCF 1F.7 |
028F: BSF 03.5 |
0290: BCF 1F.7 |
0291: BCF 03.5 |
0292: BSF 1F.0 |
.................... setup_spi(SPI_SS_DISABLED); |
0293: BCF 14.5 |
0294: BCF 20.5 |
0295: MOVF 20,W |
0296: BSF 03.5 |
0297: MOVWF 07 |
0298: BCF 03.5 |
0299: BSF 20.4 |
029A: MOVF 20,W |
029B: BSF 03.5 |
029C: MOVWF 07 |
029D: BCF 03.5 |
029E: BCF 20.3 |
029F: MOVF 20,W |
02A0: BSF 03.5 |
02A1: MOVWF 07 |
02A2: MOVLW 01 |
02A3: BCF 03.5 |
02A4: MOVWF 14 |
02A5: MOVLW 00 |
02A6: BSF 03.5 |
02A7: MOVWF 14 |
.................... setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
02A8: MOVF 01,W |
02A9: ANDLW C7 |
02AA: IORLW 08 |
02AB: MOVWF 01 |
.................... setup_timer_1(T1_DISABLED); |
02AC: BCF 03.5 |
02AD: CLRF 10 |
.................... setup_timer_2(T2_DISABLED,0,1); |
02AE: MOVLW 00 |
02AF: MOVWF 78 |
02B0: MOVWF 12 |
02B1: MOVLW 00 |
02B2: BSF 03.5 |
02B3: MOVWF 12 |
.................... setup_ccp1(CCP_OFF); |
02B4: BCF 03.5 |
02B5: BSF 20.2 |
02B6: MOVF 20,W |
02B7: BSF 03.5 |
02B8: MOVWF 07 |
02B9: BCF 03.5 |
02BA: CLRF 17 |
02BB: BSF 03.5 |
02BC: CLRF 1B |
02BD: CLRF 1C |
02BE: MOVLW 01 |
02BF: MOVWF 1D |
.................... setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
02C0: BCF 03.5 |
02C1: BSF 03.6 |
02C2: CLRF 07 |
02C3: CLRF 08 |
02C4: CLRF 09 |
.................... |
.................... printf("Simple Thermomether \r\n",); |
02C5: MOVLW 04 |
02C6: MOVWF 0D |
02C7: MOVLW 00 |
02C8: MOVWF 0F |
02C9: BCF 03.6 |
02CA: GOTO 053 |
.................... |
.................... int16 data1, data2, data3; |
.................... |
.................... int XL,XH,YL,YH,ZL,ZH; |
.................... |
.................... while(TRUE) |
.................... { |
.................... |
.................... data1=0; |
02CB: CLRF 22 |
02CC: CLRF 21 |
.................... data2=0 ; |
02CD: CLRF 24 |
02CE: CLRF 23 |
.................... |
.................... |
.................... //akcelerometr |
.................... int1 ack; |
.................... i2c_start(); // If the write command is acknowledged, |
02CF: BSF 03.5 |
02D0: BSF 06.0 |
02D1: NOP |
02D2: BSF 06.1 |
02D3: NOP |
02D4: BCF 03.5 |
02D5: BCF 06.0 |
02D6: BSF 03.5 |
02D7: BCF 06.0 |
02D8: NOP |
02D9: BCF 03.5 |
02DA: BCF 06.1 |
02DB: BSF 03.5 |
02DC: BCF 06.1 |
.................... ack = i2c_write(0x81);//hen the device is ready. |
02DD: MOVLW 81 |
02DE: BCF 03.5 |
02DF: MOVWF 2E |
02E0: CALL 09B |
02E1: MOVF 78,W |
02E2: BCF 2D.0 |
02E3: BTFSC 78.0 |
02E4: BSF 2D.0 |
.................... i2c_stop(); |
02E5: BSF 03.5 |
02E6: BCF 06.0 |
02E7: NOP |
02E8: BSF 06.1 |
02E9: BCF 03.5 |
02EA: BTFSS 06.1 |
02EB: GOTO 2EA |
02EC: NOP |
02ED: GOTO 2EE |
02EE: NOP |
02EF: BSF 03.5 |
02F0: BSF 06.0 |
02F1: NOP |
.................... ack=!ack; |
02F2: MOVLW 01 |
02F3: BCF 03.5 |
02F4: XORWF 2D,F |
.................... |
.................... |
.................... |
.................... i2c_stop(); //T |
02F5: BSF 03.5 |
02F6: BCF 06.0 |
02F7: NOP |
02F8: BSF 06.1 |
02F9: BCF 03.5 |
02FA: BTFSS 06.1 |
02FB: GOTO 2FA |
02FC: NOP |
02FD: GOTO 2FE |
02FE: NOP |
02FF: BSF 03.5 |
0300: BSF 06.0 |
0301: NOP |
.................... |
.................... i2c_start(); |
0302: BSF 06.0 |
0303: NOP |
0304: BSF 06.1 |
0305: NOP |
0306: BCF 03.5 |
0307: BCF 06.0 |
0308: BSF 03.5 |
0309: BCF 06.0 |
030A: NOP |
030B: BCF 03.5 |
030C: BCF 06.1 |
030D: BSF 03.5 |
030E: BCF 06.1 |
.................... I2C_Write(0x80); |
030F: MOVLW 80 |
0310: BCF 03.5 |
0311: MOVWF 2E |
0312: CALL 09B |
.................... I2C_write(0xF3); |
0313: MOVLW F3 |
0314: MOVWF 2E |
0315: CALL 09B |
.................... // i2c_stop(); |
.................... i2c_start(); |
0316: BSF 03.5 |
0317: BSF 06.0 |
0318: NOP |
0319: BSF 06.1 |
031A: NOP |
031B: BCF 03.5 |
031C: BTFSS 06.1 |
031D: GOTO 31C |
031E: BCF 06.0 |
031F: BSF 03.5 |
0320: BCF 06.0 |
0321: NOP |
0322: BCF 03.5 |
0323: BCF 06.1 |
0324: BSF 03.5 |
0325: BCF 06.1 |
.................... I2C_Write(0x81); |
0326: MOVLW 81 |
0327: BCF 03.5 |
0328: MOVWF 2E |
0329: CALL 09B |
.................... XH=i2c_read(0); |
032A: CLRF 77 |
032B: CALL 0CF |
032C: MOVF 78,W |
032D: MOVWF 28 |
.................... XL=i2c_read(0); |
032E: CLRF 77 |
032F: CALL 0CF |
0330: MOVF 78,W |
0331: MOVWF 27 |
.................... i2c_stop(); |
0332: BSF 03.5 |
0333: BCF 06.0 |
0334: NOP |
0335: BSF 06.1 |
0336: BCF 03.5 |
0337: BTFSS 06.1 |
0338: GOTO 337 |
0339: NOP |
033A: GOTO 33B |
033B: NOP |
033C: BSF 03.5 |
033D: BSF 06.0 |
033E: NOP |
.................... |
.................... |
.................... i2c_start(); //RH |
033F: BSF 06.0 |
0340: NOP |
0341: BSF 06.1 |
0342: NOP |
0343: BCF 03.5 |
0344: BCF 06.0 |
0345: BSF 03.5 |
0346: BCF 06.0 |
0347: NOP |
0348: BCF 03.5 |
0349: BCF 06.1 |
034A: BSF 03.5 |
034B: BCF 06.1 |
.................... I2C_Write(0x80); |
034C: MOVLW 80 |
034D: BCF 03.5 |
034E: MOVWF 2E |
034F: CALL 09B |
.................... I2C_write(0xF5); |
0350: MOVLW F5 |
0351: MOVWF 2E |
0352: CALL 09B |
.................... // i2c_stop(); |
.................... i2c_start(); |
0353: BSF 03.5 |
0354: BSF 06.0 |
0355: NOP |
0356: BSF 06.1 |
0357: NOP |
0358: BCF 03.5 |
0359: BTFSS 06.1 |
035A: GOTO 359 |
035B: BCF 06.0 |
035C: BSF 03.5 |
035D: BCF 06.0 |
035E: NOP |
035F: BCF 03.5 |
0360: BCF 06.1 |
0361: BSF 03.5 |
0362: BCF 06.1 |
.................... I2C_Write(0x81); |
0363: MOVLW 81 |
0364: BCF 03.5 |
0365: MOVWF 2E |
0366: CALL 09B |
.................... YH=i2c_read(0); |
0367: CLRF 77 |
0368: CALL 0CF |
0369: MOVF 78,W |
036A: MOVWF 2A |
.................... YL=i2c_read(0); |
036B: CLRF 77 |
036C: CALL 0CF |
036D: MOVF 78,W |
036E: MOVWF 29 |
.................... i2c_stop(); |
036F: BSF 03.5 |
0370: BCF 06.0 |
0371: NOP |
0372: BSF 06.1 |
0373: BCF 03.5 |
0374: BTFSS 06.1 |
0375: GOTO 374 |
0376: NOP |
0377: GOTO 378 |
0378: NOP |
0379: BSF 03.5 |
037A: BSF 06.0 |
037B: NOP |
.................... |
.................... |
.................... |
.................... data1 = (((unsigned int16) XH << 8) + XL>>2 ); |
037C: BCF 03.5 |
037D: CLRF 2F |
037E: MOVF 28,W |
037F: MOVWF 2E |
0380: MOVWF 2F |
0381: CLRF 2E |
0382: MOVF 27,W |
0383: ADDWF 2E,F |
0384: BTFSC 03.0 |
0385: INCF 2F,F |
0386: RRF 2F,W |
0387: MOVWF 22 |
0388: RRF 2E,W |
0389: MOVWF 21 |
038A: RRF 22,F |
038B: RRF 21,F |
038C: MOVLW 3F |
038D: ANDWF 22,F |
.................... data2 = (((unsigned int16) YH << 8) + YL>>2); |
038E: CLRF 2F |
038F: MOVF 2A,W |
0390: MOVWF 2E |
0391: MOVWF 2F |
0392: CLRF 2E |
0393: MOVF 29,W |
0394: ADDWF 2E,F |
0395: BTFSC 03.0 |
0396: INCF 2F,F |
0397: RRF 2F,W |
0398: MOVWF 24 |
0399: RRF 2E,W |
039A: MOVWF 23 |
039B: RRF 24,F |
039C: RRF 23,F |
039D: MOVLW 3F |
039E: ANDWF 24,F |
.................... |
.................... |
.................... printf("Stav: %d (procenta)\r\n", ack); |
039F: MOVLW 00 |
03A0: BTFSC 2D.0 |
03A1: MOVLW 01 |
03A2: MOVWF 2E |
03A3: MOVLW 10 |
03A4: BSF 03.6 |
03A5: MOVWF 0D |
03A6: MOVLW 00 |
03A7: MOVWF 0F |
03A8: BCF 03.0 |
03A9: MOVLW 06 |
03AA: BCF 03.6 |
03AB: MOVWF 2F |
03AC: CALL 102 |
03AD: MOVF 2E,W |
03AE: MOVWF 2F |
03AF: MOVLW 1F |
03B0: MOVWF 30 |
03B1: GOTO 166 |
03B2: MOVLW 14 |
03B3: BSF 03.6 |
03B4: MOVWF 0D |
03B5: MOVLW 00 |
03B6: MOVWF 0F |
03B7: BCF 03.0 |
03B8: MOVLW 0D |
03B9: BCF 03.6 |
03BA: MOVWF 2F |
03BB: CALL 102 |
.................... |
.................... printf("Stav: %Ld(procenta)\r\n", data1); |
03BC: MOVLW 1B |
03BD: BSF 03.6 |
03BE: MOVWF 0D |
03BF: MOVLW 00 |
03C0: MOVWF 0F |
03C1: BCF 03.0 |
03C2: MOVLW 06 |
03C3: BCF 03.6 |
03C4: MOVWF 2F |
03C5: CALL 102 |
03C6: MOVLW 10 |
03C7: MOVWF 04 |
03C8: MOVF 22,W |
03C9: MOVWF 2F |
03CA: MOVF 21,W |
03CB: MOVWF 2E |
03CC: CALL 1CD |
03CD: MOVLW 1F |
03CE: BSF 03.6 |
03CF: MOVWF 0D |
03D0: MOVLW 00 |
03D1: MOVWF 0F |
03D2: BSF 03.0 |
03D3: MOVLW 0C |
03D4: BCF 03.6 |
03D5: MOVWF 2F |
03D6: CALL 102 |
.................... printf("Stav: %Ld(procenta)\r\n", data2); |
03D7: MOVLW 26 |
03D8: BSF 03.6 |
03D9: MOVWF 0D |
03DA: MOVLW 00 |
03DB: MOVWF 0F |
03DC: BCF 03.0 |
03DD: MOVLW 06 |
03DE: BCF 03.6 |
03DF: MOVWF 2F |
03E0: CALL 102 |
03E1: MOVLW 10 |
03E2: MOVWF 04 |
03E3: MOVF 24,W |
03E4: MOVWF 2F |
03E5: MOVF 23,W |
03E6: MOVWF 2E |
03E7: CALL 1CD |
03E8: MOVLW 2A |
03E9: BSF 03.6 |
03EA: MOVWF 0D |
03EB: MOVLW 00 |
03EC: MOVWF 0F |
03ED: BSF 03.0 |
03EE: MOVLW 0C |
03EF: BCF 03.6 |
03F0: MOVWF 2F |
03F1: CALL 102 |
.................... |
.................... delay_ms (2000); |
03F2: MOVLW 08 |
03F3: MOVWF 2E |
03F4: MOVLW FA |
03F5: MOVWF 2F |
03F6: GOTO 24D |
03F7: DECFSZ 2E,F |
03F8: GOTO 3F4 |
.................... |
.................... } |
03F9: GOTO 2CB |
.................... } |
.................... |
03FA: SLEEP |
Configuration Fuses: |
Word 1: 2CF5 INTRC NOWDT NOPUT MCLR NOPROTECT NOCPD NOBROWNOUT IESO FCMEN NOLVP NODEBUG |
Word 2: 3FFF NOWRT BORV40 |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.pjt |
---|
0,0 → 1,24 |
[PROJECT] |
Target=C:\Users\Honza\Documents\pic\I2C_vlhkost\main.hex |
Development_Mode= |
Processor_Text=PIC16F887 |
ToolSuite=CCS |
Processor=0x887F |
[C:\Users\Honza\Documents\pic\I2C_vlhkost\main] |
Type=4 |
Path= |
FileList= |
BuildTool= |
OptionString= |
AdditionalOptionString= |
[mru-list] |
1=C:\Users\Honza\Documents\pic\I2C_vlhkost\main.c |
[Windows] |
0=0000 %S 0 0 796 451 3 0 |
[Units] |
Link=0 |
Count=1 |
1=C:\Users\Honza\Documents\pic\I2C_vlhkost\main |
[Opened Files] |
1=main.c |
2= |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.sta |
---|
0,0 → 1,59 |
ROM used: 1019 (12%) |
1019 (12%) including unused fragments |
2 Average locations per line |
24 Average locations per statement |
RAM used: 8 (2%) at main() level |
29 (8%) worst case |
Stack used: 2 worst case (out of 8 total available) |
Lines Stmts % Files |
----- ----- --- ----- |
82 42 100 main.c |
20 0 0 main.h |
423 0 0 ..\..\..\..\..\Program Files (x86)\PICC\devices\16F887.h |
----- ----- |
525 42 Total |
Page ROM % RAM Vol Diff Functions: |
---- --- --- --- --- ---- ---------- |
0 22 2 1 @delay_ms1 |
0 51 5 3 @I2C_READ_1 |
0 52 5 1 @I2C_WRITE_1 |
0 34 3 1 @PUTCHAR_1_ |
0 408 40 2 1503 5.5 main |
0 12 1 0 @const78 |
0 72 7 3 @PSTRINGC7_68 |
0 11 1 0 @const90 |
0 79 8 4 @PSTRINGCN7_68 |
0 21 2 3 @DIV88 |
0 103 10 6 @PRINTF_D_68 |
0 11 1 0 @const99 |
0 128 13 9 @PRINTF_LD_68 |
0 11 1 0 @const102 |
Program metrics: |
Functions 1 |
Statements 42 |
Comments 91 |
Volume (V) 1538 |
Difficilty (D) 4.9 |
Effort to implement (E) 7509 |
Time to implement (T) 7 minutes |
Est Delivered Bugs (B) 0 |
Cyclomatic Complexity 1 |
Maintainability (MI) 112 |
Segment Used Free |
----------- ---- ---- |
00000-00003 4 0 |
00004-007FF 1015 1029 |
00800-00FFF 0 2048 |
01000-017FF 0 2048 |
01800-01FFF 0 2048 |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.sym |
---|
0,0 → 1,112 |
004-005 @READ_PROGRAM_MEMORY8.P1 |
004 @WRITE_PROGRAM_MEMORY8.P2 |
015 CCP_1 |
015 CCP_1_LOW |
016 CCP_1_HIGH |
01B CCP_2_LOW |
01B CCP_2 |
01C CCP_2_HIGH |
020 @TRIS_C |
021-022 main.data1 |
023-024 main.data2 |
025-026 main.data3 |
027 main.XL |
028 main.XH |
029 main.YL |
02A main.YH |
02B main.ZL |
02C main.ZH |
02D.0 ack |
02E-02F @PRINTF_LD_68.P1 |
02E @I2C_READ_1.P2 |
02E @I2C_WRITE_1.P3 |
02E main.@SCRATCH1 |
02E @PSTRINGC7_68.@SCRATCH1 |
02F @PRINTF_D_68.P1 |
02F @delay_ms1.P2 |
02F @PSTRINGCN7_68.P3 |
02F @I2C_READ_1.@SCRATCH1 |
02F main.@SCRATCH2 |
02F @PSTRINGC7_68.@SCRATCH2 |
030 @PRINTF_D_68.P1 |
030 @I2C_READ_1.@SCRATCH2 |
030 @PSTRINGC7_68.@SCRATCH3 |
030 @PSTRINGCN7_68.@SCRATCH1 |
030 @PRINTF_LD_68.@SCRATCH1 |
031 @PSTRINGCN7_68.@SCRATCH2 |
031 @PRINTF_D_68.@SCRATCH1 |
031 @PRINTF_LD_68.@SCRATCH2 |
032 @PSTRINGCN7_68.@SCRATCH3 |
032 @PRINTF_D_68.@SCRATCH2 |
032 @PRINTF_LD_68.@SCRATCH3 |
033 @PRINTF_D_68.@SCRATCH3 |
033 @PRINTF_LD_68.@SCRATCH4 |
034 @PRINTF_D_68.@SCRATCH4 |
034 @PRINTF_LD_68.@SCRATCH5 |
035 @DIV88.P1 |
035 @PRINTF_LD_68.@SCRATCH6 |
036 @DIV88.P1 |
036 @PRINTF_LD_68.@SCRATCH7 |
037 @PUTCHAR_1_.P1 |
037 @DIV88.@SCRATCH1 |
077 @SCRATCH |
078 @SCRATCH |
078 _RETURN_ |
079 @SCRATCH |
07A @SCRATCH |
107.6 C1OUT |
108.6 C2OUT |
10D-10E @WRITE_PROGRAM_MEMORY8.P1 |
10D-10E @READ_PROGRAM_MEMORY8.P2 |
ROM Allocation: |
024D @delay_ms1 |
00CF @I2C_READ_1 |
009B @I2C_WRITE_1 |
0031 @PUTCHAR_1_ |
0263 main |
0004 @const78 |
0053 @PSTRINGC7_68 |
0010 @const90 |
0102 @PSTRINGCN7_68 |
0151 @DIV88 |
0166 @PRINTF_D_68 |
001B @const99 |
01CD @PRINTF_LD_68 |
0026 @const102 |
0263 @cinit |
User Memory space: |
User Memory space: |
Project Directory: |
C:\Users\Honza\Documents\pic\I2C_vlhkost\ |
Project Files: |
main.c |
main.h |
..\..\..\..\..\Program Files (x86)\PICC\devices\16F887.h |
Units: |
C:\Users\Honza\Documents\pic\I2C_vlhkost\main (main) |
Compiler Settings: |
Processor: PIC16F887 |
Pointer Size: 16 |
ADC Range: 0-255 |
Opt Level: 9 |
Short,Int,Long: UNSIGNED: 1,8,16 |
Float,Double: 32,32 |
Output Files: |
Errors: main.err |
Ext Symbols: main.esym |
INHX8: main.hex |
Symbols: main.sym |
List: main.lst |
Debug/COFF: main.cof |
Project: main.PJT |
Call Tree: main.tre |
Statistics: main.sta |
/Modules/Sensors/SHT25V01A/SW/PIC16F887/main.tre |
---|
0,0 → 1,47 |
ÀÄmain |
ÀÄmain 0/408 Ram=2 |
ÃÄ??0?? |
ÃÄ@PSTRINGC7_68 0/72 Ram=3 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_READ_1 0/51 Ram=3 |
ÃÄ@I2C_READ_1 0/51 Ram=3 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_WRITE_1 0/52 Ram=1 |
ÃÄ@I2C_READ_1 0/51 Ram=3 |
ÃÄ@I2C_READ_1 0/51 Ram=3 |
ÃÄ@PSTRINGCN7_68 0/79 Ram=4 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PRINTF_D_68 0/103 Ram=6 |
³ ÃÄ@DIV88 0/21 Ram=3 |
³ ÃÄ@DIV88 0/21 Ram=3 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PSTRINGCN7_68 0/79 Ram=4 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PSTRINGCN7_68 0/79 Ram=4 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PRINTF_LD_68 0/128 Ram=9 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PSTRINGCN7_68 0/79 Ram=4 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PSTRINGCN7_68 0/79 Ram=4 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PRINTF_LD_68 0/128 Ram=9 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÃÄ@PSTRINGCN7_68 0/79 Ram=4 |
³ ÃÄ@PUTCHAR_1_ 0/34 Ram=1 |
³ ÀÄ@PUTCHAR_1_ 0/34 Ram=1 |
ÀÄ@delay_ms1 0/22 Ram=1 |