/WebSVN/include/config.php
0,0 → 1,540
<?php
// WebSVN - Subversion repository viewing via the web using PHP
// Copyright (C) 2004-2006 Tim Armes
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// --
//
// config.php
//
// Configuration parameters
 
// --- FOLLOW THE INSTRUCTIONS BELOW TO CONFIGURE YOUR SETUP ---
 
// {{{ PLATFORM CONFIGURATION ---
 
// Configure a UTF-8 aware locale to properly convert bytes to characters.
// Otherwise files and directories with non-ASCII encoding are deemed to fail
// with native commands.
// $config->setLocale('C.UTF-8');
 
// Configure the path for Subversion to use for --config-dir
// (e.g. if accepting certificates is required when using repositories via https)
// $config->setSvnConfigDir('/tmp/websvn');
 
// Configure these lines if your commands aren't on your path.
//
// $config->setSvnCommandPath('/path/to/svn/command/'); // e.g. c:\\program files\\subversion\\bin
// $config->setSvnAuthzCommandPath('/path/to/svnauthz/command/'); // e.g. c:\\program files\\subversion\\bin\tools
// $config->setDiffPath('/path/to/diff/command/');
 
// For syntax colouring, if option enabled...
// $config->setEnscriptPath('/path/to/enscript/command/');
// $config->setSedPath('/path/to/sed/command/');
 
// For delivered tarballs, if option enabled...
// $config->setTarPath('/path/to/tar/command/');
 
// For delivered GZIP'd files and tarballs, if option enabled...
// $config->setGZipPath('/path/to/gzip/command/');
 
// download directory/file zipped ...
// $config->setZipPath('/path/to/zip/command/');
 
// Uncomment this line to trust server certificates
// This may useful if you use self-signed certificates and have no chance to accept the certificate once via cli
// $config->setTrustServerCert();
 
// }}}
 
// {{{ REPOSITORY SETUP ---
 
// There are 2 methods for defining the repositiories available on the system.
// Either you list them by hand, in which case you can give each one the name of
// your choice, or you use the parent path function, in which case the name of
// the directory is used as the repository name.
//
// In all cases, you may optionally supply a group name to the repositories.
// This is useful in the case that you need to separate your projects. Grouped
// repositories are referred to using the convention GroupName.RepositoryName
//
// You may also optionally specify the URL that clients should use to check out
// a working copy. If used, it must be specified after the group, username, and
// password; if these arguments are not needed, then pass null instead. Consult
// the WebSvnConfig class in include/configclass.php for function details.
//
// Performance is much better on local repositories (e.g. accessed by file://).
// However, you can also provide an interface onto a remote repository. In this
// case you should supply the username and password needed to access it.
//
// To configure the repositories by hand, copy the appropriate line below,
// uncomment it and replace the name and URL of your repository.
 
// Local repositories (without and with optional group):
// Note that the local URL to the repository depends on your platform:
// Unix-like: file:///path/to/rep
// Windows: file:///c:/svn/proj
//
// $config->addRepository('NameToDisplay', 'local URL');
// $config->addRepository('NameToDisplay', 'local URL', 'group');
$config->addRepository('MLAB', 'file:///data/svnData/MLAB');
$config->addRepository('library', 'file:///data/svnData/library');
$config->addRepository('svnkaklik', 'file:///data/svnData/svnkaklik');
$config->addRepository('MLAB_E', 'file:///data/svnData/MLAB_E');
$config->addRepository('8magsvn', 'file:///data/svnData/8magsvn');
//
// Remote repositories (without and with optional group):
// A remote URL looks like http://domain.tld/path/to/rep
//
// $config->addRepository('NameToDisplay', 'remote URL', null, 'username', 'password');
// $config->addRepository('NameToDisplay', 'remote URL', 'group', 'username', 'password');
//
// Display Part of a repository as if it was a repository.
//
// Local repositories (without and with optional group):
//
// $config->addRepositorySubpath('NameToDisplay', 'local URL', 'subpath');
// $config->addRepositorySubpath('NameToDisplay', 'local URL', 'subpath', 'group');
//
// Remote repositories (without and with optional group):
//
// $config->addRepositorySubpath('NameToDisplay', 'remote URL', 'subpath', null, 'username', 'password');
// $config->addRepositorySubpath('NameToDisplay', 'remote URL', 'subpath', 'group', 'username', 'password');
//
// To use the parent path method (without and with optional group), uncomment the next line
// and replace the path with your one. You can call the function several times if you have several parent paths.
// Note that in this case the path is a filesystem path and depends on your platform:
// Unix-like: /path/to/parent
// Windows: c:\\svn
//
// $config->parentPath('filesystem path');
// $config->parentPath('filesystem path', 'group');
//
// To exclude a repository from being added by the parentPath method uncomment the next line
// and replace the path with your one. You can call the function several times if you have several paths to exclude.
//
// $config->addExcludedPath('filesystem path of excluded rep');
//
// To add only a subset of repositories specified by the parent path you can call the function with a pattern.
//
// $config->parentPath('filesystem path', 'group', '/^beginwith/');
 
// }}}
 
// {{{ LOOK AND FEEL ---
//
// Add custom template paths or comment out templates to modify the list of user selectable templates.
// The first added template serves as a default.
 
$config->addTemplatePath($locwebsvnreal.'/templates/calm/');
$config->addTemplatePath($locwebsvnreal.'/templates/BlueGrey/');
$config->addTemplatePath($locwebsvnreal.'/templates/Elegant/');
 
// You may also specify a default template by uncommenting and changing the following line as necessary.
// If no default template is set the first added template is used.
 
// $config->setTemplatePath($locwebsvnreal.'/templates/Elegant/');
 
// You may also specify a per repository fixed template by uncommenting and changing the following
// line as necessary. Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setTemplatePath($locwebsvnreal.'/templates/Elegant/', 'myrep');
$config->setTemplatePath("$locwebsvnreal/templates/MLAB/", "MLAB");
$config->setTemplatePath("$locwebsvnreal/templates/MLAB/", "library");
$config->setTemplatePath("$locwebsvnreal/templates/BlueGrey/", "8magsvn");
$config->setTemplatePath("$locwebsvnreal/templates/Standard/", "svnkaklik");
$config->setTemplatePath("$locwebsvnreal/templates/MLAB/", "MLAB_E");
// The index page containing the projects may either be displayed as a flat view (the default),
// where grouped repositories are displayed as 'GroupName.RepName' or as a tree view.
// In the case of a tree view, you may choose whether the entire tree is open by default.
 
// $config->useTreeIndex(false); // Tree index, closed by default
// $config->useTreeIndex(true); // Tree index, open by default
 
// By default, WebSVN displays a tree view onto the current directory. You can however
// choose to display a flat view of the current directory only, which may make the display
// load faster. Uncomment this line if you want that.
 
// $config->useFlatView();
 
// By default, WebSVN displays subdirectories first and than the files of a directory,
// both alphabetically sorted.
// To use alphabetic order independent of directories and files uncomment this line.
 
// $config->setAlphabeticOrder(true);
 
// By default, WebSVN loads parent path directories and then on user click other,
// This options loads the entire directory in one go and allows to browse without delay.
// By default all will be collapsed to root directory and can be expanded.
// The performance will be impacted as it takes time to load up all the things in the
// repository. Once loaded directory exapansion is instantaneous.
// The alphabetical order is applied to all directory and files.
// This means that grouping of all dirs together and all files together is NOT supported currently!
// The files and directories are shown as is with a mixture of files and folders.
 
// $config->setLoadAllRepos(true);
 
// By default, WebSVN displays the information of the last modification
// (revision, age and author) for each repository in an extra column.
// To disable that uncomment this line.
 
// $config->setShowLastModInIndex(false);
 
// By default, WebSVN displays the information of the last modification
// (revision, age and author) for each file and directory in an extra column.
// To disable that uncomment this line.
 
// $config->setShowLastModInListing(false);
 
// By default, WebSVN displays the age of the last modification.
// Alternativly the date of the last modification can be shown.
// To show dates instead of ages uncomment this line.
 
// $config->setShowAgeInsteadOfDate(false);
 
// By default, WebSVN displays the a form to select an other repository.
// If you have a lot of repositories this slows done the script considerably.
// To disable that uncomment this line.
 
// $config->setShowRepositorySelectionForm(false);
 
// By default, WebSVN does not ignore whitespaces when showing diffs.
// To enable ignoring whitespaces in diffs per default uncomment this line.
 
// $config->setIgnoreWhitespacesInDiff(true);
 
// }}}
 
// {{{ LANGUAGE SETUP ---
 
// Set the default language. If you want English then don't do anything here.
//
// $config->setDefaultLanguage('en');
 
// Ignore the user supplied accepted languages to choose reasonable default language.
// If you want to force the default language - regardless of the client - uncomment the following line.
//
// $config->ignoreUserAcceptedLanguages();
 
// }}}
 
// {{{ MULTIVIEWS ---
 
// Uncomment this line if you want to use MultiView to access the repository by, for example:
//
// http://servername/browse/repname/path/in/repository
//
// Note: The websvn directory will need to have Multiviews turned on in Apache, and you'll need to configure browse.php
 
// $config->useMultiViews();
 
// }}}
 
// {{{ ACCESS RIGHTS ---
 
// Uncomment this line if you want to use your Subversion access file to control access
// rights via WebSVN. For this to work, you'll need to set up the same Apache based authentication
// to the WebSVN (or browse) directory as you have for Subversion itself. More information can be
// found in install.txt
 
// $config->useAccessFile('/path/to/accessfile'); // Global access file
 
// You may also specify a per repository access file by uncommenting and copying the following
// line as necessary. Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->useAccessFile('/path/to/accessfile', 'myrep'); // Access file for myrep
 
$config->useAccessFile('/data/svnData/MLAB/conf/authz', 'MLAB'); // Access file for MLAB
$config->useAccessFile('/data/svnData/svnkaklik/conf/authz', 'svnkaklik'); // Access file for svnkaklik
 
// Uncomment this line if you want to prevent search bots to index the WebSVN pages.
 
// $config->setBlockRobots();
 
// }}}
 
// {{{ FILE CONTENT ---
//
// You may wish certain file types to be GZIP'd and delieved to the user when clicked apon.
// This is useful for binary files and the like that don't display well in a browser window!
// Copy, uncomment and modify this line for each extension to which this rule should apply.
// (Don't forget the . before the extension. You don't need an index between the []'s).
// If you'd rather that the files were delivered uncompressed with the associated MIME type,
// then read below.
//
// $zipped[] = '.dll';
 
// Subversion controlled files have an svn:mime-type property that can
// be set on a file indicating its mime type. By default binary files
// are set to the generic appcliation/octet-stream, and other files
// don't have it set at all. WebSVN also has a built-in list of
// associations from file extension to MIME content type. (You can
// view this list in setup.php).
//
// Determining the content-type: By default, if the svn:mime-type
// property exists and is different from application/octet-stream, it
// is used. Otherwise, if the built-in list has a contentType entry
// for the extension of the file, that is used. Otherwise, if the
// svn:mime-type property exists has the generic binary value of
// application/octet-stream, the file will be served as a binary
// file. Otherwise, the file will be brought up as ASCII text in the
// browser window (although this text may optionally be colourised.
// See below).
//
// Uncomment this if you want to ignore any svn:mime-type property on your
// files.
//
// $config->ignoreSvnMimeTypes();
//
// Uncomment this if you want skip WebSVN's custom mime-type handling
//
// $config->ignoreWebSVNContentTypes();
//
// Following the examples below, you can add new associations, modify
// the default ones or even delete them entirely (to show them in
// ASCII via WebSVN).
 
// $contentType['.c'] = 'text/plain'; // Create a new association
// $contentType['.doc'] = 'text/plain'; // Modify an existing one
// unset($contentType['.m']); // Remove a default association
 
// If you want to selectively override one or more MIME types to display inline
// (e.g., the svn:mime-type property is something like text/plain or text/xml, or
// the file extension matches an entry in $contentType), you can choose to ignore
// one or more specific MIME types. This approach is finer-grained than ignoring
// all svn:mime-type properties, and displaying matching files inline such that
// they are highlighted correctly. (Regular expression matching is used.)
 
$config->addInlineMimeType('text/plain');
// $config->addInlineMimeType('text/*');
 
// }}}
 
// {{{ TARBALLS ---
 
// You need tar and gzip installed on your system. Set the paths above if necessary
//
// Uncomment the line below to offer a tarball download option across all your
// repositories.
//
$config->allowDownload();
//
// Set download modes
// $config->setDefaultFileDlMode('plain');
// $config->setDefaultDirectoryDlMode('gzip');
//
// To change the global option for individual repositories, uncomment and replicate
// the appropriate line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->allowDownload('myrep'); // Specifically allow downloading for 'myrep'
// $config->disallowDownload('myrep'); // Specifically disallow downloading for 'myrep'
 
// You can also choose the minimum directory level from which you'll allow downloading.
// A value of zero will allow downloading from the root. 1 will allow downloding of directories
// in the root, etc.
//
// If your project is arranged with trunk, tags and branches at the root level, then a value of 2
// would allow the downloading of directories within branches/tags while disallowing the download
// of the entire branches or tags directories. This would also stop downloading of the trunk, but
// see after for path exceptions.
//
// Change the line below to set the download level across all your repositories.
 
$config->setMinDownloadLevel(2);
 
// To change the level for individual repositories, uncomment and replicate
// the appropriate line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setMinDownloadLevel(2, 'myrep');
 
// Finally, you may add or remove certain directories (and their contents) either globally
// or on a per repository basis. Uncomment and copy the following lines as necessary. Note
// that the these are searched in the order than you give them until a match is made (with the
// exception that all the per repository exceptions are tested before the global ones). This means
// that you must disallow /a/b/c/ before you allow /a/b/ otherwise the allowed match on /a/b/ will
// stop any further searching, thereby allowing downloads on /a/b/c/.
 
// Global exceptions possibilties:
//
// $config->addAllowedDownloadException('/path/to/allowed/directory/');
// $config->addDisAllowedDownloadException('/path/to/disallowed/directory/');
//
// Per repository exception possibilties:
// Use the convention 'groupname.myrep' if your repository is in a group.
//
// $config->addAllowedDownloadException('/path/to/allowed/directory/', 'myrep');
// $config->addDisAllowedDownloadException('/path/to/disallowed/directory/', 'myrep');
 
// }}}
 
// {{{ COLOURISATION ---
 
// Uncomment this line if you want to use Enscript to colourise your file listings
//
// You'll need Enscript version 1.6 or higher AND Sed installed to use this feature.
// Set the path above.
//
// If you have version 1.6.3 or newer use the following line.
//
// $config->useEnscript();
//
// If you have version 1.6.2 or older use the following line.
//
// $config->useEnscript(true);
 
// Enscript need to be told what the contents of a file are so that it can be colourised
// correctly. WebSVN includes a predefined list of mappings from file extension to Enscript
// file type (viewable in setup.php).
//
// Here you should add and other extensions not already listed or redefine the default ones. eg:
//
// $extEnscript['.pas'] = 'pascal';
//
// Note that extensions are case sensitive.
 
// Uncomment this line if you want to use GeSHi to colourise your file listings
//
// $config->useGeshi();
// $config->setGeshiPath('/usr/share/php-geshi'); // optional. Use if you have Geshi installed without PEAR/Composer
 
// GeSHi need to be told what the contents of a file are so that it can be colourised
// correctly. WebSVN includes a predefined list of mappings from file extension to GeSHi
// languages (viewable in setup.php).
//
// Here you should add and other extensions not already listed or redefine the default ones. eg:
//
// $extGeshi['pascal'] = array('p', 'pas');
//
// Note that extensions are case sensitive.
 
// }}}
 
// {{{ Markdown Render
 
// Uncomment this line if you want to enable Markdown Rendering of README.md file in the path.
// You will need the Parsedown.php (https://github.com/erusev/parsedown) library for this to work.
// This will look for README.md file on the path and render it.
// The name of "README.md" isn't configurable for now to simply follow GitHub's conventions.
 
// $config->useParsedown();
// $config->setParsedownPath('/usr/share/php/Parsedown/'); // optional. Use if you have Parsedown installed without PEAR/Composer
 
// }}}
 
// {{{ RSSFEED ---
 
// Uncomment this line to hide the RSS feed links across all repositories
 
$config->setRssEnabled(false);
 
// To override the global setting for individual repositories, uncomment and replicate
// the appropriate line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setRssEnabled(false, 'myrep');
// $config->setRssEnabled(true, 'myrep');
 
// Uncomment this line to enable caching RSS feeds across all repositories
// This may create a large number of cache files which are currently not garbaged automatically
 
// $config->setRssCachingEnabled(true);
 
// To override the global setting for individual repositories, uncomment and replicate
// the appropriate line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setRssCachingEnabled(true, 'myrep');
// $config->setRssCachingEnabled(false, 'myrep');
 
// Uncomment this line to change the maximum number of RSS entries to display across all repositories
 
// $config->setRssMaxEntries(50);
 
// To override the global setting for individual repositories, uncomment and replicate
// the line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setRssMaxEntries(50, 'myrep');
 
// }}}
 
// {{{ SHOW CHANGED FILES IN LOG ---
 
// Uncomment this line to show changed files on log.php by default. The normal
// behavior is to do this only if the "Show changed files" link is clicked. This
// setting reverses the default action but still allows hiding changed files.
 
// $config->setLogsShowChanges(true);
 
// To override the global setting for individual repositories, uncomment and replicate
// the appropriate line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setLogsShowChanges(true, 'myrep');
// $config->setLogsShowChanges(false, 'myrep');
 
// }}}
 
// {{{ BUGTRAQ ---
 
// Uncomment this line to use bugtraq: properties to show links to your BugTracker
// from log messages.
 
// $config->setBugtraqEnabled(true);
 
// To override the global setting for individual repositories, uncomment and replicate
// the appropriate line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->setBugtraqEnabled(true, 'myrep');
// $config->setBugtraqEnabled(false, 'myrep');
 
// Usually the information to extract the bugtraq information and generate links are
// stored in SVN properties starting with 'bugtraq:':
// namely 'bugtraq:message', 'bugtraq:logregex', 'bugtraq:url' and 'bugtraq:append'.
// To override the SVN properties globally or for individual repositories, uncomment
// the appropriate line below (replacing 'myrep' with the name of the repository).
 
// $config->setBugtraqProperties('bug #%BUGID%', 'issues? (\d+)([, ] *(\d+))*'."\n".'(\d+)', 'http://www.example.com/issues/show_bug.cgi?id=%BUGID%', false);
// $config->setBugtraqProperties('bug #%BUGID%', 'issues? (\d+)([, ] *(\d+))*'."\n".'(\d+)', 'http://www.example.com/issues/show_bug.cgi?id=%BUGID%', false, 'myrep');
 
// }}}
 
// {{{ MISCELLANEOUS ---
 
// Comment out this if you don't have the right to use it. Be warned that you may need it however!
set_time_limit(0);
 
// Change the line below to specify a temporary directory other than the one PHP uses.
 
// $config->setTempDir('temp');
 
// Number of spaces to expand tabs to in diff/listing view across all repositories
 
$config->expandTabsBy(8);
 
// To override the global setting for individual repositories, uncomment and replicate
// the line below (replacing 'myrep' with the name of the repository).
// Use the convention 'groupname.myrep' if your repository is in a group.
 
// $config->expandTabsBy(3, 'myrep'); // Expand Tabs by 3 for repository 'myrep'
 
// Change the name of the breadcrumb root-phrase to that of the current repo?
// $config->setBreadcrumbRepoRootAsRepo(true);
 
// }}}