WebSVN – MLAB – / Rev 4473 and / Rev 4474 – Path Comparison

/Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_R02.scad
1,15 → 1,33
$fn=40; // model faces resolution.
include <../configuration.scad>

include <polyScrewThread_r1.scad>
PI=3.141592;


module WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky)
{




difference()
{


union()
{
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2L01_sila_zapusteni_drzaku+2L01_hloubka_zapusteni)/2, center = true, $fn=100);


//valec pod zavitem
translate([0,0,(L01_hloubka_zapusteni_drzaku+R02_sila_mateiralu_pod_lopatkami)/2])
cylinder (h = L01_hloubka_zapusteni_drzaku+L01_hrana_drzaku_b-1, r=(prumer_osicky+3*S01_sila_materialu)/2, $fn=100);

//zavit
translate([0,0,L01_hloubka_zapusteni_drzaku+L01_hrana_drzaku_b+(L01_hloubka_zapusteni_drzaku+R02_sila_mateiralu_pod_lopatkami)/2-3])
screw_thread(prumer_osicky+3S01_sila_materialu,S01_hloubka_zavitu,55,2R02_vyska_matky+3,PI/2,2);


}
//otvor pro lopatku 1
rotate(a=[0,0,0])

32,7 → 50,7
cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
//otvor na hřídelku

cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100);
cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1+60, r=prumer_osicky/2, center = true, $fn=100);
/*
//otvor pro pomocnou trubicku
translate([0,0,-(((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-zapusteni_pomocne_trubicky/2)])
41,6 → 59,6
}
}

//WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky);
WINDGAUGE02A_R02(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky);

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
 ,6 → 5,59
 PI=3.141592;
+S01_vyska=80;
+S01_prumer_vnitrni=30;
+S01_sila_materialu=2;
+S01_vyska_horni_zavit=10;
+S01_vyska_spodniho_zavitu=10;
+S01_sila_drzaku_RJ11=2;
+module WINDGAUGE02A_S01(S01_vyska,S01_prumer_vnitrni,S01_sila_materialu)
+    {
+         difference()
+        {
+union()
+ {
+//základní válec
+cylinder (h = S01_vyska-S01_vyska_horni_zavit, r=(S01_prumer_vnitrni)/2+S01_sila_materialu, $fn=100);
+//horní závit
+     translate([0,0,S01_vyska-S01_vyska_horni_zavit])
+screw_thread((S01_prumer_vnitrni+2*S01_sila_materialu),S01_hloubka_zavitu,55,S01_vyska_horni_zavit,PI/2,2);
+}
+//vystouplá část
+translate([0,0,S01_vyska_spodniho_zavitu+S01_sila_drzaku_RJ11-0.3])
+cylinder (h = S01_sila_drzaku_RJ11, r=(S01_prumer_vnitrni)/2-1-S01_hloubka_zavitu/2, $fn=100);
+//otvor na drzak rj11
+translate([0,0,S01_vyska_spodniho_zavitu])
+cylinder (h = S01_sila_drzaku_RJ11-0.3, r=(S01_prumer_vnitrni)/2-S01_hloubka_zavitu/2, $fn=100);
+//spodní závit
+screw_thread((S01_prumer_vnitrni),S01_hloubka_zavitu,55,S01_vyska_spodniho_zavitu+0.01,PI/2,2);
+//otvor skrz
+            translate([0,0,S01_vyska_spodniho_zavitu+2*S01_sila_drzaku_RJ11-0.3])
+cylinder (h = S01_vyska, r=(S01_prumer_vnitrni)/2-1, $fn=100);
+}
+}
+WINDGAUGE02A_S01(S01_vyska,S01_prumer_vnitrni,S01_sila_materialu);
+/*
 module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_sila_materialu)
     {
 ,11 → 113,11
             }
 }
+*/
-WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_sila_materialu);

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S02.scad
 ,20 → 7,108
 PI=3.141592;
-module WINDGAUGE02A_S02(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,senzor_delka,senzor_sirka,S01_tolerance_zavit,sirka_matky,magnet_vyska,S01_vyska_zuzene_casti,S01_vyska_prechodu)
+module WINDGAUGE02A_S02()
     {
 //valec se zavitem
+        union()  {
 difference()
         {
-  union()
-  {
- screw_thread(S01_prumer_zavitu-S01_tolerance_zavit,S01_hloubka_zavitu,55,S01_vyska_komponentu_na_lozisko,PI/2,2);
+  cylinder (h = S01_vyska_horni_zavit+S01_sila_materialu, r=(S01_prumer_vnitrni+4*S01_sila_materialu)/2+S01_tolerance_zavit/2, $fn=100);
+translate([0,0,S01_sila_materialu])
+screw_thread((S01_prumer_vnitrni+2*S01_sila_materialu+S01_tolerance_zavit),S01_hloubka_zavitu,55,S01_vyska_horni_zavit,PI/2,2);
-   translate([0,0,(S01_vyska_komponentu_na_lozisko+S01_vyska_zuzene_casti+S01_vyska_prechodu)/2])
-  cylinder (h = S01_vyska_komponentu_na_lozisko+S01_vyska_zuzene_casti+S01_vyska_prechodu, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
+            //otvor na pruchod hridelky
+  translate([0,0,S01_sila_materialu/2])
+  cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnitrni+0.2)/2+lozisko_prekryv, center = true, $fn=100);
+  //otvor na šroub 1
+ translate([-senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
+  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+//otvor na šroub 2
+ translate([senzor_delka/2,-senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
+  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+//otvor na šroub 3
+ translate([senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
+  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
- }
+//otvor na šroub 4
+ translate([-senzor_delka/2,senzor_sirka/2,S01_vyska_komponentu_na_lozisko/2])
+  cylinder (h = S01_vyska_komponentu_na_lozisko+0.01, r=(prumer_sroubu)/2, center = true, $fn=100);
+}
+translate([0,0,lozisko_vyska/2+S01_sila_materialu])
+   difference()
+  {
+ cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
+ cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
+}
+difference()
+  {
+      union()
+      {
+//uchyty na modul
+//sloupek 1
+translate([-senzor_delka/2,-senzor_sirka/2,0])
+SLOUPEK();
+translate([senzor_delka/2,-senzor_sirka/2,0])
+SLOUPEK();
+translate([senzor_delka/2,senzor_sirka/2,0])
+SLOUPEK();
+translate([-senzor_delka/2,senzor_sirka/2,0])
+SLOUPEK();
+    }
+ translate([0,0,S01_sila_materialu])
+  cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, $fn=100);
+}
+}
+}
+//sloupek na senzor
+module SLOUPEK()
+{
+translate([0,0,S01_sila_materialu])
+difference () {
+    cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky, r= sirka_matky/2+S01_sila_materialu, $fn=20);
+       translate([0,0,lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-vyska_matky])
+            cylinder (h = vyska_matky+0.01, r= (sirka_matky+0.2)/2, $fn=6);
+    translate([0,0,-0.01])
+            cylinder (h = lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r= (prumer_sroubu+0.2)/2, $fn=10);
+        }
+  }
+WINDGAUGE02A_S02();
+/*
  difference()
         {
  translate([0,0,S01_sila_materialu+S01_vyska_komponentu_na_lozisko/2])
 ,6 → 299,6
 */
+/*

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S03.scad
 ,7 → 4,82
 include <polyScrewThread_r1.scad>
 PI=3.141592;
+module WINDGAUGE02A_S03()
+    {
+ difference()
+        {
+//valec se zavitem
+        union()  {
+difference()
+        {
+  cylinder (h = S01_sila_materialu, r=(S01_prumer_vnitrni)/2-3, $fn=100);
+            //otvor na pruchod hridelky
+  translate([0,0,S01_sila_materialu/2])
+  cylinder (h = S01_sila_materialu+0.01, r=(lozisko_prumer_vnitrni+0.2)/2+lozisko_prekryv, center = true, $fn=100);
+  //otvor na šroub 1
+ translate([-senzor_delka/2,-senzor_sirka/2,0])
+  cylinder (h = S01_sila_materialu+0.01, r=(prumer_sroubu)/2, $fn=100);
+//otvor na šroub 2
+ translate([senzor_delka/2,-senzor_sirka/2,0])
+ cylinder (h = S01_sila_materialu+0.01, r=(prumer_sroubu)/2, $fn=100);
+//otvor na šroub 3
+ translate([senzor_delka/2,senzor_sirka/2,0])
+  cylinder (h = S01_sila_materialu+0.01, r=(prumer_sroubu)/2, $fn=100);
+//otvor na šroub 4
+ translate([-senzor_delka/2,senzor_sirka/2,0])
+ cylinder (h = S01_sila_materialu+0.01, r=(prumer_sroubu)/2, $fn=100);
+}
+translate([0,0,lozisko_vyska/2+S01_sila_materialu])
+   difference()
+  {
+ cylinder (h = lozisko_vyska, r=(lozisko_prumer_vnejsi+2*S01_sila_materialu)/2, center = true, $fn=100);
+ cylinder (h = lozisko_vyska+0.01, r=(lozisko_prumer_vnejsi+0.2)/2, center = true, $fn=100);
+}
+}
+//otvor na šroub 1
+ translate([-senzor_delka/2,-senzor_sirka/2,S01_sila_materialu])
+  cylinder (h = lozisko_vyska+0.01, r=(prumer_hlavy_sroubu)/2, $fn=100);
+//otvor na šroub 2
+ translate([senzor_delka/2,-senzor_sirka/2,S01_sila_materialu])
+ cylinder (h = lozisko_vyska+0.01, r=(prumer_hlavy_sroubu)/2, $fn=100);
+//otvor na šroub 3
+ translate([senzor_delka/2,senzor_sirka/2,S01_sila_materialu])
+ cylinder (h = lozisko_vyska+0.01, r=(prumer_hlavy_sroubu)/2, $fn=100);
+//otvor na šroub 4
+ translate([-senzor_delka/2,senzor_sirka/2,S01_sila_materialu])
+   cylinder (h = lozisko_vyska+0.01, r=(prumer_hlavy_sroubu)/2, $fn=100);
+}
+}
+WINDGAUGE02A_S03();
+/*
 module WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu,S01_tolerance_zavit,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,S01_sila_materialu,S01_hloubka_zavitu)
     {
 union()
 ,3 → 116,5
  WINDGAUGE02A_S03(S01_sila_materialu,S01_vyska_komponentu_na_lozisko,S01_prumer_zavitu,lozisko_vyska,lozisko_prumer_vnejsi,lozisko_prumer_vnitrni,lozisko_prekryv,vyska_matky,prumer_orechu,prumer_sroubu,vyska_hlavy_sroubu,prumer_hlavy_sroubu,S01_tolerance_zavit,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,vule_mezi_statorem_rotorem,S01_sila_materialu,S01_hloubka_zavitu);
+ */

/Modules/Mechanical/WINDGAUGE02A/CAD/configuration.scad
3,9 → 3,18
//OBECNE PARAMETRY
//----------------------------------------------------------------
//----------------------------------------------------------------
//S01
S01_vyska=80;
S01_prumer_vnitrni=40;
S01_sila_materialu=2;
S01_vyska_horni_zavit=10;
S01_vyska_spodniho_zavitu=10;
S01_sila_drzaku_RJ11=2;
S01_tolerance_zavit=1.5;


//Obecné parametry
prumer_osicky=3;
prumer_osicky=5.1;
prumer_pomocne_trubicky=8;
zapusteni_pomocne_trubicky=3;
vule_mezi_statorem_rotorem=3; //vůle mezi statorem a rotorem + sila materialu statoru
86,6 → 95,7

R02_sila_mateiralu_pod_lopatkami=1.3;
R02_vzdalenost_mezi_uchyty_lopatek=10;
R02_vyska_matky=5;

//WINDGAUGE02A_R03 //kryt rotoru
R03_sila_materialu=1.3;

Subversion Repositories – MLAB

/ @ 4473 → / @ 4474

Compare Path:	Rev
With Path:	Rev