WebSVN – MLAB – / Rev 4474 and / Rev 4475 – Path Comparison

 /Modules/Mechanical/WINDGAUGE02A/CAD/SRC/WINDGAUGE02A_S01.scad
 ,123 → 1,122
-$fn=40; // model faces resolution.
-include <../configuration.scad>
-include <polyScrewThread_r1.scad>
-PI=3.141592;
-S01_vyska=80;
-S01_prumer_vnitrni=30;
-S01_sila_materialu=2;
-S01_vyska_horni_zavit=10;
-S01_vyska_spodniho_zavitu=10;
-S01_sila_drzaku_RJ11=2;
-module WINDGAUGE02A_S01(S01_vyska,S01_prumer_vnitrni,S01_sila_materialu)
-    {
-         difference()
-        {
-union()
- {
-//základní válec
-cylinder (h = S01_vyska-S01_vyska_horni_zavit, r=(S01_prumer_vnitrni)/2+S01_sila_materialu, $fn=100);
-//horní závit
-     translate([0,0,S01_vyska-S01_vyska_horni_zavit])
-screw_thread((S01_prumer_vnitrni+2*S01_sila_materialu),S01_hloubka_zavitu,55,S01_vyska_horni_zavit,PI/2,2);
-}
-//vystouplá část
-translate([0,0,S01_vyska_spodniho_zavitu+S01_sila_drzaku_RJ11-0.3])
-cylinder (h = S01_sila_drzaku_RJ11, r=(S01_prumer_vnitrni)/2-1-S01_hloubka_zavitu/2, $fn=100);
-//otvor na drzak rj11
-translate([0,0,S01_vyska_spodniho_zavitu])
-cylinder (h = S01_sila_drzaku_RJ11-0.3, r=(S01_prumer_vnitrni)/2-S01_hloubka_zavitu/2, $fn=100);
-//spodní závit
-screw_thread((S01_prumer_vnitrni),S01_hloubka_zavitu,55,S01_vyska_spodniho_zavitu+0.01,PI/2,2);
-//otvor skrz
-            translate([0,0,S01_vyska_spodniho_zavitu+2*S01_sila_drzaku_RJ11-0.3])
-cylinder (h = S01_vyska, r=(S01_prumer_vnitrni)/2-1, $fn=100);
-}
-}
-WINDGAUGE02A_S01(S01_vyska,S01_prumer_vnitrni,S01_sila_materialu);
-/*
-module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_sila_materialu)
-    {
-//zuzena cas komponentu
- translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_zuzene_casti)/2+S01_vyska_prechodu])
-        difference()
-        {
-        cylinder (h = S01_vyska_zuzene_casti, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100);
-            translate([0,0,-S01_vyska_zuzene_casti/2+S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko])
-      screw_thread((R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem),S01_hloubka_zavitu,55,S01_vyska_zuzene_casti+0.01,PI/2,2);
-           translate([0,0,-(S01_vyska_zuzene_casti/2)+(S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko)/2])
-    cylinder (h = S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100);
-       //translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2])
-            }
- difference()
-        {
-translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_prechodu)/2])
- cylinder(h=S01_vyska_prechodu,r1=(S01_prumer_zavitu+2*S01_sila_materialu)/2, r2=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center=true);
- translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_prechodu)/2])
- cylinder(h=S01_vyska_prechodu,r1=(S01_prumer_zavitu)/2, r2=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center=true);
- }
-  //spodni cast se zavitem
- difference()
-        {
-        cylinder (h = S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, r=(S01_prumer_zavitu+2*S01_sila_materialu)/2, center = true, $fn=100);
-            translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2])
-      // metric_thread (diameter=S01_prumer_zavitu, pitch=1, length=S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+0.01, internal=true, n_starts=6);
- screw_thread(S01_prumer_zavitu,4,55,S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+0.01,PI/2,2);
-            }
-}
-*/
+$fn=40; // model faces resolution.
+include <../configuration.scad>
+include <polyScrewThread_r1.scad>
+PI=3.141592;
+S01_vyska=80;
+S01_prumer_vnitrni=30;
+S01_sila_materialu=2;
+S01_vyska_horni_zavit=10;
+S01_vyska_spodniho_zavitu=10;
+S01_sila_drzaku_RJ11=2;
+module WINDGAUGE02A_S01(S01_vyska,S01_prumer_vnitrni,S01_sila_materialu)
+{
+    difference()
+    {
+        union()
+        {
+            //základní válec
+            cylinder (h = S01_vyska-S01_vyska_horni_zavit, r=(S01_prumer_vnitrni)/2+S01_sila_materialu, $fn=100);
+            //horní závit
+                 translate([0,0,S01_vyska-S01_vyska_horni_zavit])
+            screw_thread((S01_prumer_vnitrni+2*S01_sila_materialu),S01_hloubka_zavitu,55,S01_vyska_horni_zavit,PI/2,2);
+        }
+        //vystouplá část
+        translate([0,0,S01_vyska_spodniho_zavitu+S01_sila_drzaku_RJ11-0.3])
+        cylinder (h = S01_sila_drzaku_RJ11, r=(S01_prumer_vnitrni)/2-1-S01_hloubka_zavitu/2, $fn=100);
+        //otvor na drzak rj11
+        translate([0,0,S01_vyska_spodniho_zavitu])
+        cylinder (h = S01_sila_drzaku_RJ11-0.3, r=(S01_prumer_vnitrni)/2-S01_hloubka_zavitu/2, $fn=100);
+        //spodní závit
+        screw_thread((S01_prumer_vnitrni),S01_hloubka_zavitu,55,S01_vyska_spodniho_zavitu+0.01,PI/2,2);
+        //otvor skrz
+                    translate([0,0,S01_vyska_spodniho_zavitu+2*S01_sila_drzaku_RJ11-0.3])
+        cylinder (h = S01_vyska, r=(S01_prumer_vnitrni)/2-1, $fn=100);
+        cube(100); // cut to show internal relief
+    }
+}
+WINDGAUGE02A_S01(S01_vyska,S01_prumer_vnitrni,S01_sila_materialu);
+/*
+module WINDGAUGE02A_S01(R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,S01_vyska_zuzene_casti,S01_vyska_na_elektroniku,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_vyska_prechodu,vule_mezi_statorem_rotorem,S01_vyska_zavitu_na_nasroubovani_drzaku,S01_sila_materialu)
+    {
+//zuzena cas komponentu
+ translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_zuzene_casti)/2+S01_vyska_prechodu])
+        difference()
+        {
+        cylinder (h = S01_vyska_zuzene_casti, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100);
+            translate([0,0,-S01_vyska_zuzene_casti/2+S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko])
+      screw_thread((R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem),S01_hloubka_zavitu,55,S01_vyska_zuzene_casti+0.01,PI/2,2);
+           translate([0,0,-(S01_vyska_zuzene_casti/2)+(S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko)/2])
+    cylinder (h = S01_vyska_zuzene_casti-R02_sila_mateiralu_pod_lopatkami-S01_vyska_komponentu_na_lozisko+0.01, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center = true, $fn=100);
+       //translate([0,0,(stator3_vyska-stator3_vyska_prekryti)/2])
+            }
+ difference()
+        {
+translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_prechodu)/2])
+ cylinder(h=S01_vyska_prechodu,r1=(S01_prumer_zavitu+2*S01_sila_materialu)/2, r2=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center=true);
+ translate([0,0,(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+S01_vyska_prechodu)/2])
+ cylinder(h=S01_vyska_prechodu,r1=(S01_prumer_zavitu)/2, r2=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2, center=true);
+ }
+  //spodni cast se zavitem
+ difference()
+        {
+        cylinder (h = S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko, r=(S01_prumer_zavitu+2*S01_sila_materialu)/2, center = true, $fn=100);
+            translate([0,0,-(S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko)/2])
+      // metric_thread (diameter=S01_prumer_zavitu, pitch=1, length=S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+0.01, internal=true, n_starts=6);
+ screw_thread(S01_prumer_zavitu,4,55,S01_vyska_na_elektroniku+S01_vyska_zavitu_na_nasroubovani_drzaku+2*S01_vyska_komponentu_na_lozisko+0.01,PI/2,2);
+            }
+}
+*/

Subversion Repositories – MLAB

/ @ 4474 → / @ 4475

Compare Path:	Rev
With Path:	Rev