No changes between revisions
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/!____!.txt
5,9 → 5,10
 
FTDI D2XX library (for Linux), use latest version from http://www.ftdichip.com/Drivers/D2XX.htm
 
lib_linux_i386\WinTypes.h <-- libftd2xx1.1.12.tar.gz/release/WinTypes.h
lib_linux_i386\ftd2xx.h <-- libftd2xx1.1.12.tar.gz/release/examples/ftd2xx.h
lib_linux_i386\libftd2xx.a <-- libftd2xx1.1.12.tar.gz/release/build/i386/libftd2xx.a
lib_linux\WinTypes.h <-- libftd2xx1.1.12.tar.gz/release/WinTypes.h
lib_linux\ftd2xx.h <-- libftd2xx1.1.12.tar.gz/release/examples/ftd2xx.h
lib_linux\i386\libftd2xx.a <-- libftd2xx1.1.12.tar.gz/release/build/i386/libftd2xx.a
lib_linux\x86_64\libftd2xx.a <-- libftd2xx1.1.12.tar.gz/release/build/x86_64/libftd2xx.a
 
Main program, pin configuration is here in .h file
 
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/BIN/mlab_xvcd_i386
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/BIN/mlab_xvcd_x86_64
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/lib_linux/WinTypes.h
0,0 → 1,87
#ifndef __WINDOWS_TYPES__
#define __WINDOWS_TYPES__
 
#define MAX_NUM_DEVICES 50
#include <sys/time.h>
 
typedef unsigned int DWORD;
typedef unsigned int ULONG;
typedef unsigned short USHORT;
typedef unsigned short SHORT;
typedef unsigned char UCHAR;
typedef unsigned short WORD;
typedef unsigned char BYTE;
typedef BYTE *LPBYTE;
typedef unsigned int BOOL;
typedef unsigned char BOOLEAN;
typedef unsigned char CHAR;
typedef BOOL *LPBOOL;
typedef UCHAR *PUCHAR;
typedef const char *LPCSTR;
typedef char *PCHAR;
typedef void *PVOID;
typedef void *HANDLE;
typedef unsigned int LONG;
typedef int INT;
typedef unsigned int UINT;
typedef char *LPSTR;
typedef char *LPTSTR;
typedef DWORD *LPDWORD;
typedef WORD *LPWORD;
typedef ULONG *PULONG;
typedef PVOID LPVOID;
typedef void VOID;
typedef unsigned long long int ULONGLONG;
 
typedef struct _OVERLAPPED {
DWORD Internal;
DWORD InternalHigh;
DWORD Offset;
DWORD OffsetHigh;
HANDLE hEvent;
} OVERLAPPED, *LPOVERLAPPED;
 
typedef struct _SECURITY_ATTRIBUTES {
DWORD nLength;
LPVOID lpSecurityDescriptor;
BOOL bInheritHandle;
} SECURITY_ATTRIBUTES , *LPSECURITY_ATTRIBUTES;
 
typedef struct timeval SYSTEMTIME;
typedef struct timeval FILETIME;
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
 
//
// Modem Status Flags
//
#define MS_CTS_ON ((DWORD)0x0010)
#define MS_DSR_ON ((DWORD)0x0020)
#define MS_RING_ON ((DWORD)0x0040)
#define MS_RLSD_ON ((DWORD)0x0080)
 
//
// Error Flags
//
 
#define CE_RXOVER 0x0001 // Receive Queue overflow
#define CE_OVERRUN 0x0002 // Receive Overrun Error
#define CE_RXPARITY 0x0004 // Receive Parity Error
#define CE_FRAME 0x0008 // Receive Framing error
#define CE_BREAK 0x0010 // Break Detected
#define CE_TXFULL 0x0100 // TX Queue is full
#define CE_PTO 0x0200 // LPTx Timeout
#define CE_IOE 0x0400 // LPTx I/O Error
#define CE_DNS 0x0800 // LPTx Device not selected
#define CE_OOP 0x1000 // LPTx Out-Of-Paper
#define CE_MODE 0x8000 // Requested mode unsupported
 
#ifndef INVALID_HANDLE_VALUE
#define INVALID_HANDLE_VALUE 0xFFFFFFFF
#endif
 
#endif
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/lib_linux/ftd2xx.h
0,0 → 1,1087
/*++
 
Copyright (c) 2001-2011 Future Technology Devices International Limited
THIS SOFTWARE IS PROVIDED BY FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE, DATA, OR PROFITS OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
FTDI DRIVERS MAY BE USED ONLY IN CONJUNCTION WITH PRODUCTS BASED ON FTDI PARTS.
FTDI DRIVERS MAY BE DISTRIBUTED IN ANY FORM AS LONG AS LICENSE INFORMATION IS NOT MODIFIED.
IF A CUSTOM VENDOR ID AND/OR PRODUCT ID OR DESCRIPTION STRING ARE USED, IT IS THE
RESPONSIBILITY OF THE PRODUCT MANUFACTURER TO MAINTAIN ANY CHANGES AND SUBSEQUENT WHQL
RE-CERTIFICATION AS A RESULT OF MAKING THESE CHANGES.
Module Name:
ftd2xx.h
Abstract:
Native USB device driver for FTDI FT232x, FT245x, FT2232x and FT4232x devices
FTD2XX library definitions
Environment:
user mode
--*/
 
 
#ifndef FTD2XX_H
#define FTD2XX_H
 
#ifndef _WINDOWS
#include <pthread.h>
#define WINAPI
#endif
 
// The following ifdef block is the standard way of creating macros
// which make exporting from a DLL simpler. All files within this DLL
// are compiled with the FTD2XX_EXPORTS symbol defined on the command line.
// This symbol should not be defined on any project that uses this DLL.
// This way any other project whose source files include this file see
// FTD2XX_API functions as being imported from a DLL, whereas this DLL
// sees symbols defined with this macro as being exported.
 
#ifdef FTD2XX_EXPORTS
#define FTD2XX_API __declspec(dllexport)
#else
#define FTD2XX_API __declspec(dllimport)
#endif
 
#ifndef _WINDOWS
#include "WinTypes.h"
 
#ifdef FTD2XX_API
#undef FTD2XX_API
#define FTD2XX_API
#endif
#endif
typedef struct _EVENT_HANDLE{
pthread_cond_t eCondVar;
pthread_mutex_t eMutex;
int iVar;
} EVENT_HANDLE;
 
typedef PVOID FT_HANDLE;
typedef ULONG FT_STATUS;
 
//
// Device status
//
enum {
FT_OK,
FT_INVALID_HANDLE,
FT_DEVICE_NOT_FOUND,
FT_DEVICE_NOT_OPENED,
FT_IO_ERROR,
FT_INSUFFICIENT_RESOURCES,
FT_INVALID_PARAMETER,
FT_INVALID_BAUD_RATE, //7
 
FT_DEVICE_NOT_OPENED_FOR_ERASE,
FT_DEVICE_NOT_OPENED_FOR_WRITE,
FT_FAILED_TO_WRITE_DEVICE,
FT_EEPROM_READ_FAILED,
FT_EEPROM_WRITE_FAILED,
FT_EEPROM_ERASE_FAILED,
FT_EEPROM_NOT_PRESENT,
FT_EEPROM_NOT_PROGRAMMED,
FT_INVALID_ARGS,
FT_NOT_SUPPORTED,
FT_OTHER_ERROR
};
 
 
#define FT_SUCCESS(status) ((status) == FT_OK)
 
//
// FT_OpenEx Flags
//
 
#define FT_OPEN_BY_SERIAL_NUMBER 1
#define FT_OPEN_BY_DESCRIPTION 2
#define FT_OPEN_BY_LOCATION 4
 
//
// FT_ListDevices Flags (used in conjunction with FT_OpenEx Flags
//
 
#define FT_LIST_NUMBER_ONLY 0x80000000
#define FT_LIST_BY_INDEX 0x40000000
#define FT_LIST_ALL 0x20000000
 
#define FT_LIST_MASK (FT_LIST_NUMBER_ONLY|FT_LIST_BY_INDEX|FT_LIST_ALL)
 
//
// Baud Rates
//
 
#define FT_BAUD_300 300
#define FT_BAUD_600 600
#define FT_BAUD_1200 1200
#define FT_BAUD_2400 2400
#define FT_BAUD_4800 4800
#define FT_BAUD_9600 9600
#define FT_BAUD_14400 14400
#define FT_BAUD_19200 19200
#define FT_BAUD_38400 38400
#define FT_BAUD_57600 57600
#define FT_BAUD_115200 115200
#define FT_BAUD_230400 230400
#define FT_BAUD_460800 460800
#define FT_BAUD_921600 921600
 
//
// Word Lengths
//
 
#define FT_BITS_8 (UCHAR) 8
#define FT_BITS_7 (UCHAR) 7
 
//
// Stop Bits
//
 
#define FT_STOP_BITS_1 (UCHAR) 0
#define FT_STOP_BITS_2 (UCHAR) 2
 
//
// Parity
//
 
#define FT_PARITY_NONE (UCHAR) 0
#define FT_PARITY_ODD (UCHAR) 1
#define FT_PARITY_EVEN (UCHAR) 2
#define FT_PARITY_MARK (UCHAR) 3
#define FT_PARITY_SPACE (UCHAR) 4
 
//
// Flow Control
//
 
#define FT_FLOW_NONE 0x0000
#define FT_FLOW_RTS_CTS 0x0100
#define FT_FLOW_DTR_DSR 0x0200
#define FT_FLOW_XON_XOFF 0x0400
 
//
// Purge rx and tx buffers
//
#define FT_PURGE_RX 1
#define FT_PURGE_TX 2
 
//
// Events
//
 
typedef void (*PFT_EVENT_HANDLER)(DWORD,DWORD);
 
#define FT_EVENT_RXCHAR 1
#define FT_EVENT_MODEM_STATUS 2
#define FT_EVENT_LINE_STATUS 4
 
//
// Timeouts
//
 
#define FT_DEFAULT_RX_TIMEOUT 300
#define FT_DEFAULT_TX_TIMEOUT 300
 
//
// Device types
//
 
typedef ULONG FT_DEVICE;
 
enum {
FT_DEVICE_BM,
FT_DEVICE_AM,
FT_DEVICE_100AX,
FT_DEVICE_UNKNOWN,
FT_DEVICE_2232C,
FT_DEVICE_232R,
FT_DEVICE_2232H,
FT_DEVICE_4232H,
FT_DEVICE_232H
};
 
//
// Bit Modes
//
 
#define FT_BITMODE_RESET 0x00
#define FT_BITMODE_ASYNC_BITBANG 0x01
#define FT_BITMODE_MPSSE 0x02
#define FT_BITMODE_SYNC_BITBANG 0x04
#define FT_BITMODE_MCU_HOST 0x08
#define FT_BITMODE_FAST_SERIAL 0x10
#define FT_BITMODE_CBUS_BITBANG 0x20
#define FT_BITMODE_SYNC_FIFO 0x40
 
 
//
// FT232R CBUS Options EEPROM values
//
 
#define FT_232R_CBUS_TXDEN 0x00 // Tx Data Enable
#define FT_232R_CBUS_PWRON 0x01 // Power On
#define FT_232R_CBUS_RXLED 0x02 // Rx LED
#define FT_232R_CBUS_TXLED 0x03 // Tx LED
#define FT_232R_CBUS_TXRXLED 0x04 // Tx and Rx LED
#define FT_232R_CBUS_SLEEP 0x05 // Sleep
#define FT_232R_CBUS_CLK48 0x06 // 48MHz clock
#define FT_232R_CBUS_CLK24 0x07 // 24MHz clock
#define FT_232R_CBUS_CLK12 0x08 // 12MHz clock
#define FT_232R_CBUS_CLK6 0x09 // 6MHz clock
#define FT_232R_CBUS_IOMODE 0x0A // IO Mode for CBUS bit-bang
#define FT_232R_CBUS_BITBANG_WR 0x0B // Bit-bang write strobe
#define FT_232R_CBUS_BITBANG_RD 0x0C // Bit-bang read strobe
 
//
// FT232H CBUS Options EEPROM values
//
 
#define FT_232H_CBUS_TRISTATE 0x00 // Tristate
#define FT_232H_CBUS_TXLED 0x01 // Tx LED
#define FT_232H_CBUS_RXLED 0x02 // Rx LED
#define FT_232H_CBUS_TXRXLED 0x03 // Tx and Rx LED
#define FT_232H_CBUS_PWREN 0x04 // Power Enable
#define FT_232H_CBUS_SLEEP 0x05 // Sleep
#define FT_232H_CBUS_DRIVE_0 0x06 // Drive pin to logic 0
#define FT_232H_CBUS_DRIVE_1 0x07 // Drive pin to logic 1
#define FT_232H_CBUS_IOMODE 0x08 // IO Mode for CBUS bit-bang
#define FT_232H_CBUS_TXDEN 0x09 // Tx Data Enable
#define FT_232H_CBUS_CLK30 0x0A // 30MHz clock
#define FT_232H_CBUS_CLK15 0x0B // 15MHz clock
#define FT_232H_CBUS_CLK7_5 0x0C // 7.5MHz clock
 
 
#ifdef __cplusplus
extern "C" {
#endif
FTD2XX_API
FT_STATUS WINAPI FT_Open(
int deviceNumber,
FT_HANDLE *pHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_OpenEx(
PVOID pArg1,
DWORD Flags,
FT_HANDLE *pHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ListDevices(
PVOID pArg1,
PVOID pArg2,
DWORD Flags
);
 
FTD2XX_API
FT_STATUS FT_SetVIDPID(
DWORD dwVID,
DWORD dwPID
);
FTD2XX_API
FT_STATUS FT_GetVIDPID(
DWORD * pdwVID,
DWORD * pdwPID
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Close(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Read(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD nBufferSize,
LPDWORD lpBytesReturned
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Write(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD nBufferSize,
LPDWORD lpBytesWritten
);
 
FTD2XX_API
FT_STATUS WINAPI FT_IoCtl(
FT_HANDLE ftHandle,
DWORD dwIoControlCode,
LPVOID lpInBuf,
DWORD nInBufSize,
LPVOID lpOutBuf,
DWORD nOutBufSize,
LPDWORD lpBytesReturned,
LPOVERLAPPED lpOverlapped
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBaudRate(
FT_HANDLE ftHandle,
ULONG BaudRate
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDivisor(
FT_HANDLE ftHandle,
USHORT Divisor
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDataCharacteristics(
FT_HANDLE ftHandle,
UCHAR WordLength,
UCHAR StopBits,
UCHAR Parity
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetFlowControl(
FT_HANDLE ftHandle,
USHORT FlowControl,
UCHAR XonChar,
UCHAR XoffChar
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ResetDevice(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDtr(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ClrDtr(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetRts(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ClrRts(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetModemStatus(
FT_HANDLE ftHandle,
ULONG *pModemStatus
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetChars(
FT_HANDLE ftHandle,
UCHAR EventChar,
UCHAR EventCharEnabled,
UCHAR ErrorChar,
UCHAR ErrorCharEnabled
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Purge(
FT_HANDLE ftHandle,
ULONG Mask
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetTimeouts(
FT_HANDLE ftHandle,
ULONG ReadTimeout,
ULONG WriteTimeout
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetQueueStatus(
FT_HANDLE ftHandle,
DWORD *dwRxBytes
);
FTD2XX_API
FT_STATUS WINAPI FT_GetQueueStatusEx(
FT_HANDLE ftHandle,
DWORD *dwRxBytes
);
FTD2XX_API
FT_STATUS WINAPI FT_SetEventNotification(
FT_HANDLE ftHandle,
DWORD Mask,
PVOID Param
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetStatus(
FT_HANDLE ftHandle,
DWORD *dwRxBytes,
DWORD *dwTxBytes,
DWORD *dwEventDWord
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBreakOn(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBreakOff(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetWaitMask(
FT_HANDLE ftHandle,
DWORD Mask
);
 
FTD2XX_API
FT_STATUS WINAPI FT_WaitOnMask(
FT_HANDLE ftHandle,
DWORD *Mask
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetEventStatus(
FT_HANDLE ftHandle,
DWORD *dwEventDWord
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ReadEE(
FT_HANDLE ftHandle,
DWORD dwWordOffset,
LPWORD lpwValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_WriteEE(
FT_HANDLE ftHandle,
DWORD dwWordOffset,
WORD wValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EraseEE(
FT_HANDLE ftHandle
);
//
// structure to hold program data for FT_Program function
//
typedef struct ft_program_data {
 
DWORD Signature1; // Header - must be 0x00000000
DWORD Signature2; // Header - must be 0xffffffff
DWORD Version; // Header - FT_PROGRAM_DATA version
// 0 = original
// 1 = FT2232C extensions
// 2 = FT232R extensions
// 3 = FT2232H extensions
// 4 = FT4232H extensions
// 5 = FT232H extensions
WORD VendorId; // 0x0403
WORD ProductId; // 0x6001
char *Manufacturer; // "FTDI"
char *ManufacturerId; // "FT"
char *Description; // "USB HS Serial Converter"
char *SerialNumber; // "FT000001" if fixed, or NULL
WORD MaxPower; // 0 < MaxPower <= 500
WORD PnP; // 0 = disabled, 1 = enabled
WORD SelfPowered; // 0 = bus powered, 1 = self powered
WORD RemoteWakeup; // 0 = not capable, 1 = capable
//
// Rev4 (FT232B) extensions
//
UCHAR Rev4; // non-zero if Rev4 chip, zero otherwise
UCHAR IsoIn; // non-zero if in endpoint is isochronous
UCHAR IsoOut; // non-zero if out endpoint is isochronous
UCHAR PullDownEnable; // non-zero if pull down enabled
UCHAR SerNumEnable; // non-zero if serial number to be used
UCHAR USBVersionEnable; // non-zero if chip uses USBVersion
WORD USBVersion; // BCD (0x0200 => USB2)
//
// Rev 5 (FT2232) extensions
//
UCHAR Rev5; // non-zero if Rev5 chip, zero otherwise
UCHAR IsoInA; // non-zero if in endpoint is isochronous
UCHAR IsoInB; // non-zero if in endpoint is isochronous
UCHAR IsoOutA; // non-zero if out endpoint is isochronous
UCHAR IsoOutB; // non-zero if out endpoint is isochronous
UCHAR PullDownEnable5; // non-zero if pull down enabled
UCHAR SerNumEnable5; // non-zero if serial number to be used
UCHAR USBVersionEnable5; // non-zero if chip uses USBVersion
WORD USBVersion5; // BCD (0x0200 => USB2)
UCHAR AIsHighCurrent; // non-zero if interface is high current
UCHAR BIsHighCurrent; // non-zero if interface is high current
UCHAR IFAIsFifo; // non-zero if interface is 245 FIFO
UCHAR IFAIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR IFAIsFastSer; // non-zero if interface is Fast serial
UCHAR AIsVCP; // non-zero if interface is to use VCP drivers
UCHAR IFBIsFifo; // non-zero if interface is 245 FIFO
UCHAR IFBIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR IFBIsFastSer; // non-zero if interface is Fast serial
UCHAR BIsVCP; // non-zero if interface is to use VCP drivers
//
// Rev 6 (FT232R) extensions
//
UCHAR UseExtOsc; // Use External Oscillator
UCHAR HighDriveIOs; // High Drive I/Os
UCHAR EndpointSize; // Endpoint size
UCHAR PullDownEnableR; // non-zero if pull down enabled
UCHAR SerNumEnableR; // non-zero if serial number to be used
UCHAR InvertTXD; // non-zero if invert TXD
UCHAR InvertRXD; // non-zero if invert RXD
UCHAR InvertRTS; // non-zero if invert RTS
UCHAR InvertCTS; // non-zero if invert CTS
UCHAR InvertDTR; // non-zero if invert DTR
UCHAR InvertDSR; // non-zero if invert DSR
UCHAR InvertDCD; // non-zero if invert DCD
UCHAR InvertRI; // non-zero if invert RI
UCHAR Cbus0; // Cbus Mux control
UCHAR Cbus1; // Cbus Mux control
UCHAR Cbus2; // Cbus Mux control
UCHAR Cbus3; // Cbus Mux control
UCHAR Cbus4; // Cbus Mux control
UCHAR RIsD2XX; // non-zero if using D2XX drivers
//
// Rev 7 (FT2232H) Extensions
//
UCHAR PullDownEnable7; // non-zero if pull down enabled
UCHAR SerNumEnable7; // non-zero if serial number to be used
UCHAR ALSlowSlew; // non-zero if AL pins have slow slew
UCHAR ALSchmittInput; // non-zero if AL pins are Schmitt input
UCHAR ALDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR AHSlowSlew; // non-zero if AH pins have slow slew
UCHAR AHSchmittInput; // non-zero if AH pins are Schmitt input
UCHAR AHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BLSlowSlew; // non-zero if BL pins have slow slew
UCHAR BLSchmittInput; // non-zero if BL pins are Schmitt input
UCHAR BLDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BHSlowSlew; // non-zero if BH pins have slow slew
UCHAR BHSchmittInput; // non-zero if BH pins are Schmitt input
UCHAR BHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR IFAIsFifo7; // non-zero if interface is 245 FIFO
UCHAR IFAIsFifoTar7; // non-zero if interface is 245 FIFO CPU target
UCHAR IFAIsFastSer7; // non-zero if interface is Fast serial
UCHAR AIsVCP7; // non-zero if interface is to use VCP drivers
UCHAR IFBIsFifo7; // non-zero if interface is 245 FIFO
UCHAR IFBIsFifoTar7; // non-zero if interface is 245 FIFO CPU target
UCHAR IFBIsFastSer7; // non-zero if interface is Fast serial
UCHAR BIsVCP7; // non-zero if interface is to use VCP drivers
UCHAR PowerSaveEnable; // non-zero if using BCBUS7 to save power for self-powered designs
//
// Rev 8 (FT4232H) Extensions
//
UCHAR PullDownEnable8; // non-zero if pull down enabled
UCHAR SerNumEnable8; // non-zero if serial number to be used
UCHAR ASlowSlew; // non-zero if AL pins have slow slew
UCHAR ASchmittInput; // non-zero if AL pins are Schmitt input
UCHAR ADriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BSlowSlew; // non-zero if AH pins have slow slew
UCHAR BSchmittInput; // non-zero if AH pins are Schmitt input
UCHAR BDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR CSlowSlew; // non-zero if BL pins have slow slew
UCHAR CSchmittInput; // non-zero if BL pins are Schmitt input
UCHAR CDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR DSlowSlew; // non-zero if BH pins have slow slew
UCHAR DSchmittInput; // non-zero if BH pins are Schmitt input
UCHAR DDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR ARIIsTXDEN; // non-zero if port A uses RI as RS485 TXDEN
UCHAR BRIIsTXDEN; // non-zero if port B uses RI as RS485 TXDEN
UCHAR CRIIsTXDEN; // non-zero if port C uses RI as RS485 TXDEN
UCHAR DRIIsTXDEN; // non-zero if port D uses RI as RS485 TXDEN
UCHAR AIsVCP8; // non-zero if interface is to use VCP drivers
UCHAR BIsVCP8; // non-zero if interface is to use VCP drivers
UCHAR CIsVCP8; // non-zero if interface is to use VCP drivers
UCHAR DIsVCP8; // non-zero if interface is to use VCP drivers
//
// Rev 9 (FT232H) Extensions
//
UCHAR PullDownEnableH; // non-zero if pull down enabled
UCHAR SerNumEnableH; // non-zero if serial number to be used
UCHAR ACSlowSlewH; // non-zero if AC pins have slow slew
UCHAR ACSchmittInputH; // non-zero if AC pins are Schmitt input
UCHAR ACDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR ADSlowSlewH; // non-zero if AD pins have slow slew
UCHAR ADSchmittInputH; // non-zero if AD pins are Schmitt input
UCHAR ADDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR Cbus0H; // Cbus Mux control
UCHAR Cbus1H; // Cbus Mux control
UCHAR Cbus2H; // Cbus Mux control
UCHAR Cbus3H; // Cbus Mux control
UCHAR Cbus4H; // Cbus Mux control
UCHAR Cbus5H; // Cbus Mux control
UCHAR Cbus6H; // Cbus Mux control
UCHAR Cbus7H; // Cbus Mux control
UCHAR Cbus8H; // Cbus Mux control
UCHAR Cbus9H; // Cbus Mux control
UCHAR IsFifoH; // non-zero if interface is 245 FIFO
UCHAR IsFifoTarH; // non-zero if interface is 245 FIFO CPU target
UCHAR IsFastSerH; // non-zero if interface is Fast serial
UCHAR IsFT1248H; // non-zero if interface is FT1248
UCHAR FT1248CpolH; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)
UCHAR FT1248LsbH; // FT1248 data is LSB (1) or MSB (0)
UCHAR FT1248FlowControlH; // FT1248 flow control enable
UCHAR IsVCPH; // non-zero if interface is to use VCP drivers
UCHAR PowerSaveEnableH; // non-zero if using ACBUS7 to save power for self-powered designs
} FT_PROGRAM_DATA, *PFT_PROGRAM_DATA;
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_Program(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA pData
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_ProgramEx(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA lpData,
char *Manufacturer,
char *ManufacturerId,
char *Description,
char *SerialNumber
);
FTD2XX_API
FT_STATUS WINAPI FT_EE_Read(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA pData
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_ReadEx(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA lpData,
char *Manufacturer,
char *ManufacturerId,
char *Description,
char *SerialNumber
);
FTD2XX_API
FT_STATUS WINAPI FT_EE_UASize(
FT_HANDLE ftHandle,
LPDWORD lpdwSize
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_UAWrite(
FT_HANDLE ftHandle,
PUCHAR pucData,
DWORD dwDataLen
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_UARead(
FT_HANDLE ftHandle,
PUCHAR pucData,
DWORD dwDataLen,
LPDWORD lpdwBytesRead
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetLatencyTimer(
FT_HANDLE ftHandle,
UCHAR ucLatency
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetLatencyTimer(
FT_HANDLE ftHandle,
PUCHAR pucLatency
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBitMode(
FT_HANDLE ftHandle,
UCHAR ucMask,
UCHAR ucEnable
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetBitMode(
FT_HANDLE ftHandle,
PUCHAR pucMode
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetUSBParameters(
FT_HANDLE ftHandle,
ULONG ulInTransferSize,
ULONG ulOutTransferSize
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceInfo(
FT_HANDLE ftHandle,
FT_DEVICE *lpftDevice,
LPDWORD lpdwID,
PCHAR SerialNumber,
PCHAR Description,
LPVOID Dummy
);
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceLocId(
FT_HANDLE ftHandle,
LPDWORD lpdwLocId
);
 
FTD2XX_API
FT_STATUS WINAPI FT_StopInTask(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_RestartInTask(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetResetPipeRetryCount(
FT_HANDLE ftHandle,
DWORD dwCount
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ResetPort(
FT_HANDLE ftHandle
);
FTD2XX_API
FT_STATUS WINAPI FT_CyclePort(
FT_HANDLE ftHandle
);
 
//
// Win32-type functions
//
 
FTD2XX_API
FT_HANDLE WINAPI FT_W32_CreateFile(
LPCSTR lpszName,
DWORD dwAccess,
DWORD dwShareMode,
LPSECURITY_ATTRIBUTES lpSecurityAttributes,
DWORD dwCreate,
DWORD dwAttrsAndFlags,
HANDLE hTemplate
);
 
FTD2XX_API
BOOL WINAPI FT_W32_CloseHandle(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_ReadFile(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD nBufferSize,
LPDWORD lpBytesReturned,
LPOVERLAPPED lpOverlapped
);
 
FTD2XX_API
BOOL WINAPI FT_W32_WriteFile(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD nBufferSize,
LPDWORD lpBytesWritten,
LPOVERLAPPED lpOverlapped
);
 
FTD2XX_API
DWORD WINAPI FT_W32_GetLastError(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetOverlappedResult(
FT_HANDLE ftHandle,
LPOVERLAPPED lpOverlapped,
LPDWORD lpdwBytesTransferred,
BOOL bWait
);
 
FTD2XX_API
BOOL WINAPI FT_W32_CancelIo(
FT_HANDLE ftHandle
);
 
 
//
// Win32 COMM API type functions
//
typedef struct _FTCOMSTAT {
DWORD fCtsHold : 1;
DWORD fDsrHold : 1;
DWORD fRlsdHold : 1;
DWORD fXoffHold : 1;
DWORD fXoffSent : 1;
DWORD fEof : 1;
DWORD fTxim : 1;
DWORD fReserved : 25;
DWORD cbInQue;
DWORD cbOutQue;
} FTCOMSTAT, *LPFTCOMSTAT;
 
typedef struct _FTDCB {
DWORD DCBlength; /* sizeof(FTDCB) */
DWORD BaudRate; /* Baudrate at which running */
DWORD fBinary: 1; /* Binary Mode (skip EOF check) */
DWORD fParity: 1; /* Enable parity checking */
DWORD fOutxCtsFlow:1; /* CTS handshaking on output */
DWORD fOutxDsrFlow:1; /* DSR handshaking on output */
DWORD fDtrControl:2; /* DTR Flow control */
DWORD fDsrSensitivity:1; /* DSR Sensitivity */
DWORD fTXContinueOnXoff: 1; /* Continue TX when Xoff sent */
DWORD fOutX: 1; /* Enable output X-ON/X-OFF */
DWORD fInX: 1; /* Enable input X-ON/X-OFF */
DWORD fErrorChar: 1; /* Enable Err Replacement */
DWORD fNull: 1; /* Enable Null stripping */
DWORD fRtsControl:2; /* Rts Flow control */
DWORD fAbortOnError:1; /* Abort all reads and writes on Error */
DWORD fDummy2:17; /* Reserved */
WORD wReserved; /* Not currently used */
WORD XonLim; /* Transmit X-ON threshold */
WORD XoffLim; /* Transmit X-OFF threshold */
BYTE ByteSize; /* Number of bits/byte, 4-8 */
BYTE Parity; /* 0-4=None,Odd,Even,Mark,Space */
BYTE StopBits; /* 0,1,2 = 1, 1.5, 2 */
char XonChar; /* Tx and Rx X-ON character */
char XoffChar; /* Tx and Rx X-OFF character */
char ErrorChar; /* Error replacement char */
char EofChar; /* End of Input character */
char EvtChar; /* Received Event character */
WORD wReserved1; /* Fill for now. */
} FTDCB, *LPFTDCB;
 
typedef struct _FTTIMEOUTS {
DWORD ReadIntervalTimeout; /* Maximum time between read chars. */
DWORD ReadTotalTimeoutMultiplier; /* Multiplier of characters. */
DWORD ReadTotalTimeoutConstant; /* Constant in milliseconds. */
DWORD WriteTotalTimeoutMultiplier; /* Multiplier of characters. */
DWORD WriteTotalTimeoutConstant; /* Constant in milliseconds. */
} FTTIMEOUTS,*LPFTTIMEOUTS;
 
 
FTD2XX_API
BOOL WINAPI FT_W32_ClearCommBreak(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_ClearCommError(
FT_HANDLE ftHandle,
LPDWORD lpdwErrors,
LPFTCOMSTAT lpftComstat
);
 
FTD2XX_API
BOOL WINAPI FT_W32_EscapeCommFunction(
FT_HANDLE ftHandle,
DWORD dwFunc
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommModemStatus(
FT_HANDLE ftHandle,
LPDWORD lpdwModemStatus
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommState(
FT_HANDLE ftHandle,
LPFTDCB lpftDcb
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommTimeouts(
FT_HANDLE ftHandle,
FTTIMEOUTS *pTimeouts
);
 
FTD2XX_API
BOOL WINAPI FT_W32_PurgeComm(
FT_HANDLE ftHandle,
DWORD dwMask
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommBreak(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommMask(
FT_HANDLE ftHandle,
ULONG ulEventMask
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommState(
FT_HANDLE ftHandle,
LPFTDCB lpftDcb
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommTimeouts(
FT_HANDLE ftHandle,
FTTIMEOUTS *pTimeouts
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetupComm(
FT_HANDLE ftHandle,
DWORD dwReadBufferSize,
DWORD dwWriteBufferSize
);
 
FTD2XX_API
BOOL WINAPI FT_W32_WaitCommEvent(
FT_HANDLE ftHandle,
PULONG pulEvent,
LPOVERLAPPED lpOverlapped
);
 
//
// Device information
//
 
typedef struct _ft_device_list_info_node {
ULONG Flags;
ULONG Type;
ULONG ID;
DWORD LocId;
char SerialNumber[16];
char Description[64];
FT_HANDLE ftHandle;
} FT_DEVICE_LIST_INFO_NODE;
 
// Device information flags
enum {
FT_FLAGS_OPENED = 1,
FT_FLAGS_HISPEED = 2
};
 
FTD2XX_API
FT_STATUS WINAPI FT_CreateDeviceInfoList(
LPDWORD lpdwNumDevs
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceInfoList(
FT_DEVICE_LIST_INFO_NODE *pDest,
LPDWORD lpdwNumDevs
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceInfoDetail(
DWORD dwIndex,
LPDWORD lpdwFlags,
LPDWORD lpdwType,
LPDWORD lpdwID,
LPDWORD lpdwLocId,
LPVOID lpSerialNumber,
LPVOID lpDescription,
FT_HANDLE *pftHandle
);
 
 
//
// Version information
//
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDriverVersion(
FT_HANDLE ftHandle,
LPDWORD lpdwVersion
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetLibraryVersion(
LPDWORD lpdwVersion
);
 
//
// Events
//
 
#define EV_RXCHAR 0x0001 // Any Character received
#define EV_RXFLAG 0x0002 // Received certain character
#define EV_TXEMPTY 0x0004 // Transmitt Queue Empty
#define EV_CTS 0x0008 // CTS changed state
#define EV_DSR 0x0010 // DSR changed state
#define EV_RLSD 0x0020 // RLSD changed state
#define EV_BREAK 0x0040 // BREAK received
#define EV_ERR 0x0080 // Line status error occurred
#define EV_RING 0x0100 // Ring signal detected
#define EV_PERR 0x0200 // Printer error occured
#define EV_RX80FULL 0x0400 // Receive buffer is 80 percent full
#define EV_EVENT1 0x0800 // Provider specific event 1
#define EV_EVENT2 0x1000 // Provider specific event 2
 
//
// Escape Functions
//
 
#define SETXOFF 1 // Simulate XOFF received
#define SETXON 2 // Simulate XON received
#define SETRTS 3 // Set RTS high
#define CLRRTS 4 // Set RTS low
#define SETDTR 5 // Set DTR high
#define CLRDTR 6 // Set DTR low
#define RESETDEV 7 // Reset device if possible
#define SETBREAK 8 // Set the device break line.
#define CLRBREAK 9 // Clear the device break line.
 
//
// PURGE function flags.
//
#define PURGE_TXABORT 0x0001 // Kill the pending/current writes to the comm port.
#define PURGE_RXABORT 0x0002 // Kill the pending/current reads to the comm port.
#define PURGE_TXCLEAR 0x0004 // Kill the transmit queue if there.
#define PURGE_RXCLEAR 0x0008 // Kill the typeahead buffer if there.
 
#ifdef __cplusplus
}
#endif
 
 
#endif /* FTD2XX_H */
 
 
 
 
 
 
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/linuxBuild.sh
5,4 → 5,5
# sudo apt-get install g++-multilib
 
# Just compile and link the target executable:
gcc mlab_xvcd*.cpp lib_linux_i386/libftd2xx.a -m32 -ldl -lpthread -lrt -Os -o mlab_xvcd_i386
gcc mlab_xvcd*.cpp lib_linux/i386/libftd2xx.a -m32 -lstdc++ -ldl -lpthread -lrt -Os -o mlab_xvcd_i386
gcc mlab_xvcd*.cpp lib_linux/x86_64/libftd2xx.a -m64 -lstdc++ -ldl -lpthread -lrt -Os -o mlab_xvcd_x86_64
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/mlab_xvcd.cpp
17,6 → 17,7
// 1.06 2013_04 Added support for Linux (thanks to Martin Poviser)
// 1.07 2013_04 Rewritten Host Address function for Linux (function gethostbyname returns 127.0.1.1 on Debian systems)
// Solved compatibility problems on Linux (FT_SetLatncyTimer requires delay, udev problem with ftdi_sio driver)
// 1.08 2013_06 Added linux x86_64 variant
//
//
// Purpose:
112,7 → 113,7
 
#else // not WIN32
 
#include "lib_linux_i386/WinTypes.h"
#include "lib_linux/WinTypes.h"
#include <sys/types.h>
#include <sys/socket.h>
#include <fcntl.h>
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/mlab_xvcd.h
1,7 → 1,7
// Program Version
// ---------------
 
#define VERSION "1.07" // Program version
#define VERSION "1.08" // Program version
#define YEAR "2013" // Year of the program
 
// JTAG Port Definitions
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/mlab_xvcd_port_FTDI.cpp
208,7 → 208,7
if (findDeviceBy==FT_OPEN_BY_LOCATION)
{
// Open device (location is number, not string)
int findDeviceByInt = atoiEx(findDeviceByStr);
long int findDeviceByInt = atoiEx(findDeviceByStr);
ftStatus = FT_OpenEx((void*)findDeviceByInt, findDeviceBy, &ftHandle);
}
else
/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/mlab_xvcd_port_FTDI.h
49,7 → 49,7
#ifdef WIN32
#include "lib_win32\ftd2xx.h" // FTDI Library
#else
#include "lib_linux_i386/ftd2xx.h"
#include "lib_linux/ftd2xx.h"
#endif