| 0,0 → 1,57 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB/Modules/H_Bridge/DRV8835HB01A/SCH_PCB/bot.gpi |
| |
| Date : 19.3.2013 16:24:55 |
| Plotfile : D:/Honza/MLAB/Modules/H_Bridge/DRV8835HB01A/SCH_PCB/bot.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0040inch 78 |
| D11 rectangle 0.0197inch x 0.0110inch 12 |
| D12 rectangle 0.0354inch x 0.0787inch 1 |
| D13 rectangle 0.0098inch x 0.0276inch 4 |
| D14 round 0.0357inch 3 |
| D15 square 0.1500inch 12 |
| D16 rectangle 0.0591inch x 0.0512inch 4 |
| D17 rectangle 0.0512inch x 0.0591inch 4 |
| D18 square 0.0650inch 21 |
| D19 rectangle 0.1004inch x 0.0984inch 2 |
| D20 rectangle 0.0551inch x 0.0709inch 4 |
| D21 round 0.2540inch 4 |
| D22 draw 0.0320inch 6 |
| D23 draw 0.0120inch 2188 |
| D24 draw 0.0100inch 23 |
| D25 round 0.0317inch 74 |
| D26 draw 0.0760inch 11 |
| D27 draw 0.0700inch 2 |
| D28 draw 0.0240inch 2 |
| D29 draw 0.0400inch 17 |
| D30 draw 0.0160inch 1 |
| |