No changes between revisions
/Designs/MRAKOMER3/SW/Linux/Ix86/mrakomer
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:executable
+*
\ No newline at end of property
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property
/Designs/MRAKOMER3/SW/Linux/Ix86/mrakomer.c
0,0 → 1,147
#include <termio.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/time.h>
#include <time.h>
 
// how many measurements to average?
#define FIFOLEN 120
#define EVERY 20 // issue a printout every N seconds
 
int
main (int argc, char **argv)
{
struct termios tel_termios;
char rbuf[10], buf[256], schar, credo = 1;
 
int i, number = 0;
int status;
int port;
FILE *portf, *crfile;
 
int fifopos = 0, fifolenx = 0;
float fifo[FIFOLEN];
float fifo2[FIFOLEN];
float fifo3[FIFOLEN];
 
for (i = 0; i < FIFOLEN; i++)
{
fifo[i] = 0.0;
fifo2[i] = 0.0;
fifo3[i] = 0.0;
}
 
port = open (argv[1], O_RDWR);
 
if (port < 0)
{
fprintf (stderr, "mrakomer: cant access the device\n");
return -1;
}
 
if (tcgetattr (port, &tel_termios) < 0)
{
fprintf (stderr, "mrakomer: device not a port?\n");
return -1;
}
 
if (cfsetospeed (&tel_termios, B2400) < 0 ||
cfsetispeed (&tel_termios, B2400) < 0)
{
fprintf (stderr, "mrakomer: speed setting problem?\n");
return -1;
}
 
tel_termios.c_iflag = IGNBRK & ~(IXON | IXOFF | IXANY);
tel_termios.c_oflag = 0;
tel_termios.c_cflag =
((tel_termios.c_cflag & ~(CSIZE)) | CS8) & ~(PARENB | PARODD);
tel_termios.c_lflag = 0;
tel_termios.c_cc[VMIN] = 0;
tel_termios.c_cc[VTIME] = 5;
 
if (tcsetattr (port, TCSANOW, &tel_termios) < 0)
{
fprintf (stderr, "mrakomer: port init failed at tcsetattr\n");
return -1;
}
 
// get current state of control signals
ioctl (port, TIOCMGET, &status);
 
// Drop DTR
status &= ~TIOCM_DTR;
ioctl (port, TIOCMSET, &status);
 
// fprintf(stderr, "mrakomer: Port init complete\n");
 
portf = fdopen (port, "w+");
 
schar = 'x';
for (;;)
{
int tstat, tno;
char *x;
float temp0, temp1, avg, avg2, avg3;
struct timeval tv;
 
// send the measurement request and mark up the time when it was sent.
// x=no heating, h=heating
write (port, &schar, 1);
gettimeofday (&tv, NULL);
 
// Wait a while for the reply and process it.
usleep (480000);
x = fgets (buf, 256, portf);
sscanf (buf, "%d %f %f %d", &tno, &temp0, &temp1, &tstat);
 
// thermostat ;)
if (temp0 < 5.0)
schar = 'h';
if (temp0 > 5.1)
schar = 'x';
 
// decide if we agree to open. Only valid in the night, but that's not a problem anyway.
fifo[fifopos] = temp0 - temp1;
fifo2[fifopos] = temp0;
fifo3[fifopos] = temp1;
 
if (++fifopos > FIFOLEN)
fifopos = 0;
if (++fifolenx > FIFOLEN)
fifolenx = FIFOLEN;
 
for (avg2 = avg3 = avg = 0, i = 0; i < fifolenx; i++)
{
avg += fifo[i];
avg2 += fifo2[i];
avg3 += fifo3[i];
}
avg /= fifolenx;
avg2 /= fifolenx;
avg3 /= fifolenx;
// decide whether to open or not ;)
if (avg < 6.25)
credo = 1; // blocked
if (avg > 6.75)
credo = 0; // unblocked
 
 
crfile = fopen ("/home/standa/dcm/mrakomer.credo", "w+");
if (crfile)
fprintf (crfile, "%d\n", (int) credo);
if (crfile)
fclose (crfile);
 
// send to the stdout the result.
if (!(++number % EVERY))
{
fprintf (stdout, "%.2f %d %.2f %.2f %d %c %.2f %d\n",
(double) tv.tv_sec + (double) tv.tv_usec / 1000000, tno,
avg2, avg3, tstat, schar, avg, (int) credo);
 
fflush (stdout);
}
// sleep (DELAY-1);
}
}