/Web/AboutWeb.en.html
File deleted
/Web/AboutMLAB.en.html
File deleted
/Web/About.en.html
47,31 → 47,190
 
<!-- ============== TEXT ============== -->
<div class="Text">
<h1 class="FirstWord Small"> About MLAB </h1>
<h1> About MLAB </h1>
<p>
<a href="PIC/about_bastl.jpg"><img width=480 height=360 src="PIC/about_bastl_small.jpg"
alt="Sample picture"></a>
</p>
 
<h2>Purpose </h2>
<p>
Basic reason for existence of MLAB is the need for opened robust and
somehow universal kit (as a box of universal bricks) for both electronic
hobbyists and professionals. MLAB is focused on general electronics and
microcontroller technology. It can be used for tuition as well.
</p>
 
<h2>Features</h2>
<p>
In opposite to another more known projects such as Arduino the MLAB is not a development platform
focused to only one architecture of microprocessors but uses many types of chips from much
manufactures. In addition the MLAB provide much better design reliability which is achieved by using
the base board usually made from aluminium or single sided PCB material. The board is not only
mechanical support but it is a good ground conductor as well.
</p>
<p>
The base is furnished by holes for fastening of individual MLAB modules.
The holes are places on a grid every 10.16mm (0.4inch). Dimension of a
module can be any integer number of grid and screws are usually places
to all four corners.
</p>
<p>
<a href="PIC/about_montage.jpg"><img width=480 height=360 src="PIC/about_montage_small.jpg"
alt="Assembling of modules on the base"></a>
</p>
<p>
Electrical connections are made by stranded wires with female connectors
on both sides. On modules there are prepared jumper connectors in common
raster 2.54mm (that is 1/10 inch). Wires can be easily obtained from old
printer cable. There are a lot of wires of different colors, almost free.
</p>
<p>
<a href="PIC/about_wires.jpg"><img width=480 height=360 src="PIC/about_wires_small.jpg"
alt="Picture of wires"></a>
</p>
<p>
For power supplies it is used the same jumper connectors. Usually this
way:
</p>
<ul>
<li>
For +5V 3-pin jumpers are used. Both side pins are grounds and middle
pin is power. This type of connector is used for stabilized +5V or for
small voltage from batteries.
</li>
<li>
For power above +5V (typically +12V or +16V for programmer or for
power electronics it is used 4-pin jumper connectors. Both side pins
are ground and two middle pins are power. It is supposed that
experimenter knows that he deals with “hi voltage” that can be
dangerous for some devices.
</li>
</ul>
 
<h1> About web </h1>
<h2> Why this web was created </h2>
<p>
<a href="../Web/AboutMLAB.en.html">MLAB</a>
What is MLAB, why it was created and what is good for.
The web was created because we believe that we have something to publish.
The main reason was the MLAB project. It is some sort of construction kit
or electronic "lego". MLAB modules proved useable so well that we whish to share
it with the others.
<p>
<h2> What can you find here </h2>
<p>
Everything about MLAB (documentation, design files etc.) and a lot of other
things. Some articles about electronics. Everything is original written by our
authors.
</p>
<h1 class="FirstWord Small"> About web </h1>
<h2> Language </h2>
<p>
<a href="../Web/AboutWeb.en.html">WEB</a>
Some information about our web.
The web is primary in Czech language but some information is translated
into English. When the text is not in English it is presented in Czech.
Schematics, tables, source files and other design data are considered
to be international enough to be valuable even without translated text.
</p>
<h1 class="FirstWord Small"> About authors </h1>
<p>
<a href="../Web/AboutAuthors.en.html">Authors.</a>
Let's go and meet us.
The translation may not be done well. If you can see errors let us know, please.
</p>
<h1 class="FirstWord Small"> Copyrights. </h1>
<h2> Who are the authors </h2>
<p>
<a href="../Web/Copyright.en.html">Copyrights.</a>
What is allowed and what not.
Several keen electronics and hobbyists. Our hobby is our job as well.
The web and MLAB project are noncommercial and they are created in
authors free time.
</p>
<h2> Something does not work? </h2>
<p>
Let us know and we will try to mend or improve it (if the result is worth
the effort).
</p>
<h2> How does it work inside? </h2>
<p>
The base component is SubVersion system (source code version system, similar
to CVS or SourSafe). Every piece of information is in SubVersion database and
web content is automatically generated. SubVersion is primarily intended for
the authors. Users do not need to install SubVersion client. The content of SVN
is accessible via WebSVN Web interface (read only).
</p>
<p>
Web server is Apache 2 running on Linux.
</p>
<p>
Web pages are based on HTML4 and CSS2. They are not optimised for
any particular browser and we hope that we avoided successfully all important
bugs of widely used browsers.
</p>
 
<!-- Facebook like button -->
<h1> About authors </h1>
<p>
In the beginning of the project MLAB was developed by few <a href="../Web/AboutAuthors.en.html">authors</a>. But now MLAB is continually improved by much more wide community. Some of main contributors is listed on project wiki page.
</p>
 
<iframe src="http://www.facebook.com/plugins/likebox.php?href=http%3A%2F%2Fwww.facebook.com%2Fpages%2FMLAB%2F203283666377414&amp;width=292&amp;colorscheme=light&amp;show_faces=true&amp;stream=true&amp;header=true&amp;height=427" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:292px; height:427px;" allowTransparency="true"></iframe>
<h1> Copyrights </h1>
 
<h2> Extend </h2>
<p>
The whole content of this web is copyrighted material and remains as is
even if it is stored or spread by any means (web, computer, operational memory).
</p>
 
<h2> Warranties </h2>
<p>
The authors gives the project as is without any warranty. They particularly do not
guarantee the accuracy, completeness and suitability for any purpose.
Thinking is required.
</p>
 
<h2> What is allowed </h2>
<p>
It is possible to use the project for noncommercial purposes and for personal
studying. Commercial organizations may use it for their own internal needs
but as a part of training of their customers or partners.
</p>
<p>
Original and derived project may be published provided that they contain
link to MLAB web <a href="http://www.mlab.cz"> http://www.mlab.cz</a>
and that the information about original authors is preserved.
</p>
 
<h2> What is not allowed </h2>
<p>
To use project for commercial purpose, especially for profit.
It is not allowed to manufacture the MLAB devices or modules and sell them
and to publish MLAB documentation by print or publish it with another
commercial documentation.
</p>
<p>
It is not allowed to modify the project and deploy it as commercial project.
</p>
 
<h2> Exceptions </h2>
<p>
It is possible to use MLAB against the rules above with agreement of the authors
only. If you are not sure consult with authors.
</p>
 
<h1> Community communication channels </h1>
 
<h2> IRC channel </h2>
<p>
The most fastest communication channel is IRC on our server mlab.cz #mlab
</p>
 
<h2> Mailing list </h2>
<p>
E-mail conference is powered by <a href="http://groups.google.com/group/mlab-users">google groups</a>. This is the most reliable communication method useful for universal questions addressed to mlab community. This method of communication is useful specially for questions and problems who can be needed probably even other users.
</p>
 
<h2> Facebook </h2>
<p>
We have a facebook page too <a href="https://www.facebook.com/pages/MLAB/203283666377414">Facebooku</a> it is used mainly for propagation or highlighting some of main events in development.
</p>
 
<h1> Project partners </h1>
 
The MLAB project is such widespread at now that it can not be maintained by small group of contributors. As it needs much sources to stay actual and state-of-art at today technology abilities. The whole project is supported by others groups and institutions.
 
</div>
 
<!-- AUTOINCLUDE START "Page/Footer.en.ihtml" DO NOT REMOVE -->