1 |
#include ".\main.h" |
1 |
#include ".\main.h" |
2 |
|
2 |
|
3 |
#define LED1 PIN_C6 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
3 |
#define LED1 PIN_C6 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
4 |
#define LED2 PIN_C5 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
4 |
#define LED2 PIN_C5 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
5 |
#define LED3 PIN_C4 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
5 |
#define LED3 PIN_C4 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
6 |
#define LED4 PIN_D3 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
6 |
#define LED4 PIN_D3 //CHANGE PIN_XX TO YOUR LED PIN NUMBER |
7 |
|
7 |
|
8 |
#define S1 PIN_B0 //Raw up |
8 |
#define S1 PIN_B0 //Raw up |
9 |
#define S2 PIN_B1 //Raw down |
9 |
#define S2 PIN_B1 //Raw down |
10 |
#define S3 PIN_D0 //Fine up |
10 |
#define S3 PIN_D0 //Fine up |
11 |
#define S4 PIN_D1 //Fine down |
11 |
#define S4 PIN_D1 //Fine down |
12 |
|
12 |
|
13 |
#define BEEP PIN_D2 //piezo beeper |
13 |
#define BEEP PIN_D2 //piezo beeper |
14 |
|
14 |
|
15 |
#define LCD_ENABLE_PIN PIN_E0 //// |
15 |
#define LCD_ENABLE_PIN PIN_E0 //// |
16 |
#define LCD_RS_PIN PIN_E1 //// |
16 |
#define LCD_RS_PIN PIN_E1 //// |
17 |
#define LCD_RW_PIN PIN_E2 //// |
17 |
#define LCD_RW_PIN PIN_E2 //// |
18 |
#define LCD_DATA4 PIN_D4 //// |
18 |
#define LCD_DATA4 PIN_D4 //// |
19 |
#define LCD_DATA5 PIN_D5 //// |
19 |
#define LCD_DATA5 PIN_D5 //// |
20 |
#define LCD_DATA6 PIN_D6 //// |
20 |
#define LCD_DATA6 PIN_D6 //// |
21 |
#define LCD_DATA7 PIN_D7 |
21 |
#define LCD_DATA7 PIN_D7 |
22 |
#include <lcd.c> |
22 |
#include <lcd.c> |
23 |
|
23 |
|
24 |
#define OUTPUT_ENABLE PIN_B5 |
24 |
#define OUTPUT_ENABLE PIN_B5 |
25 |
|
25 |
|
26 |
|
26 |
|
27 |
//#define MAXDUTY (int16)160 // 50 kHz |
27 |
//#define MAXDUTY (int16)160 // 50 kHz |
28 |
#define MAXDUTY (int16)400 // 20 kHz |
28 |
#define MAXDUTY (int16)400 // 20 kHz |
29 |
//#define MAXDUTY (int16)800 // 10 kHz |
29 |
//#define MAXDUTY (int16)800 // 10 kHz |
30 |
#define HALFDUTY (int16)MAXDUTY/2 |
30 |
#define HALFDUTY (int16)MAXDUTY/2 |
31 |
//#define DIVISOR 199 // 10 kHz |
31 |
//#define DIVISOR 199 // 10 kHz |
32 |
#define DIVISOR 99 // 20 kHz |
32 |
#define DIVISOR 99 // 20 kHz |
33 |
//#define DIVISOR 39 // 50 kHz |
33 |
//#define DIVISOR 39 // 50 kHz |
34 |
|
34 |
|
35 |
#define MAX_OUTPUT 1000 |
35 |
#define MAX_OUTPUT 1000 |
36 |
|
36 |
|
- |
|
37 |
unsigned int16 setpoint=43; |
- |
|
38 |
unsigned int16 adc_value; |
- |
|
39 |
int1 output_permit=FALSE; |
- |
|
40 |
|
- |
|
41 |
#INT_AD |
- |
|
42 |
void adc_handler() { |
- |
|
43 |
|
- |
|
44 |
adc_value = read_adc(); |
- |
|
45 |
if(output_permit == TRUE) |
- |
|
46 |
{ |
- |
|
47 |
if (adc_value <= setpoint) |
- |
|
48 |
{ |
- |
|
49 |
set_pwm2_duty((int16)255); // zapnuti menice |
- |
|
50 |
output_low(LED2); |
- |
|
51 |
} |
- |
|
52 |
else // vypnuti menice |
- |
|
53 |
{ |
- |
|
54 |
set_pwm2_duty((int16)MAXDUTY); |
- |
|
55 |
output_high(LED2); |
- |
|
56 |
} |
- |
|
57 |
|
- |
|
58 |
} |
- |
|
59 |
else |
- |
|
60 |
{ |
- |
|
61 |
set_pwm2_duty((int16)MAXDUTY); |
- |
|
62 |
output_high(LED2); |
- |
|
63 |
} |
- |
|
64 |
} |
- |
|
65 |
|
37 |
void sound_beep( unsigned int lenght, int16 frequency) |
66 |
void sound_beep( unsigned int lenght, int16 frequency) |
38 |
{ |
67 |
{ |
39 |
unsigned int i; |
68 |
unsigned int i; |
40 |
|
69 |
|
41 |
for(i=0;i<=lenght;i++) |
70 |
for(i=0;i<=lenght;i++) |
42 |
{ |
71 |
{ |
43 |
output_toggle(BEEP); |
72 |
output_toggle(BEEP); |
44 |
delay_us(1/frequency); |
73 |
delay_us(1/frequency); |
45 |
} |
74 |
} |
46 |
} |
75 |
} |
47 |
|
76 |
|
48 |
void main() |
77 |
void main() |
49 |
{ |
78 |
{ |
50 |
unsigned int16 setpoint=43; |
- |
|
51 |
unsigned int16 napeti; |
- |
|
52 |
unsigned int1 button_press; // semafor pro cteni tlacitek |
79 |
unsigned int1 button_press; // semafor pro cteni tlacitek |
53 |
|
80 |
|
54 |
setup_adc_ports(sAN0|VSS_VREF); |
81 |
setup_adc_ports(sAN0|VSS_VREF); |
55 |
setup_adc(ADC_CLOCK_DIV_32); |
82 |
setup_adc(ADC_CLOCK_DIV_32); |
56 |
setup_spi(SPI_SS_DISABLED); |
83 |
setup_spi(SPI_SS_DISABLED); |
57 |
setup_timer_0(RTCC_EXT_L_TO_H|RTCC_DIV_1); |
84 |
setup_timer_0(RTCC_EXT_L_TO_H|RTCC_DIV_1); |
58 |
setup_timer_1(T1_DISABLED); |
85 |
setup_timer_1(T1_DISABLED); |
59 |
setup_timer_2(T2_DIV_BY_1,DIVISOR,1); |
86 |
setup_timer_2(T2_DIV_BY_1,DIVISOR,1); |
60 |
setup_ccp1(CCP_PWM); |
87 |
setup_ccp1(CCP_PWM); |
61 |
setup_ccp2(CCP_PWM); |
88 |
setup_ccp2(CCP_PWM); |
62 |
set_pwm1_duty(HALFDUTY); |
89 |
set_pwm1_duty(HALFDUTY); |
63 |
set_pwm2_duty(MAXDUTY); |
90 |
set_pwm2_duty(MAXDUTY); |
64 |
setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
91 |
setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard |
65 |
setup_oscillator(OSC_8MHZ); |
92 |
setup_oscillator(OSC_8MHZ); |
66 |
|
93 |
|
- |
|
94 |
enable_interrupts(INT_AD); |
67 |
// enable_interrupts(GLOBAL); |
95 |
enable_interrupts(GLOBAL); |
68 |
|
96 |
|
69 |
output_high(LED1); |
97 |
output_high(LED1); |
70 |
output_high(LED2); |
98 |
output_high(LED2); |
71 |
output_high(LED3); |
99 |
output_high(LED3); |
72 |
output_high(LED4); |
100 |
output_high(LED4); |
73 |
output_low(BEEP); |
101 |
output_low(BEEP); |
74 |
|
102 |
|
75 |
lcd_init(); |
103 |
lcd_init(); |
76 |
set_adc_channel(0); |
104 |
set_adc_channel(0); |
77 |
|
105 |
|
78 |
lcd_gotoxy(1,1); |
106 |
lcd_gotoxy(1,1); |
79 |
lcd_putc("HVPS01A"); |
107 |
lcd_putc("HVPS01A"); |
80 |
lcd_gotoxy(1,2); |
108 |
lcd_gotoxy(1,2); |
81 |
lcd_putc(" MLAB.cz"); |
109 |
lcd_putc(" MLAB.cz"); |
82 |
Delay_ms(1000); |
110 |
Delay_ms(1000); |
83 |
|
111 |
|
84 |
lcd_putc("\f"); |
112 |
lcd_putc("\f"); |
85 |
|
113 |
|
86 |
//read_adc(ADC_START_ONLY); |
114 |
read_adc(ADC_START_ONLY); |
87 |
|
115 |
|
88 |
while(true) |
116 |
while(true) |
89 |
{ |
117 |
{ |
90 |
napeti = read_adc(); |
- |
|
91 |
if(input(OUTPUT_ENABLE)) |
118 |
if(input(OUTPUT_ENABLE)) output_permit=TRUE; |
92 |
{ |
- |
|
93 |
if (napeti <= setpoint) |
- |
|
94 |
{ |
- |
|
95 |
set_pwm2_duty((int16)255); // zapnuti menice |
- |
|
96 |
output_low(LED2); |
- |
|
97 |
} |
- |
|
98 |
else // vypnuti menice |
- |
|
99 |
{ |
- |
|
100 |
set_pwm2_duty((int16)MAXDUTY); |
- |
|
101 |
output_high(LED2); |
119 |
else output_permit=FALSE; |
102 |
} |
- |
|
103 |
|
- |
|
104 |
} |
- |
|
105 |
else |
- |
|
106 |
{ |
- |
|
107 |
set_pwm2_duty((int16)MAXDUTY); |
- |
|
108 |
output_high(LED2); |
- |
|
109 |
} |
- |
|
110 |
|
120 |
|
111 |
lcd_gotoxy(1,1); |
121 |
lcd_gotoxy(1,1); |
112 |
printf(lcd_putc,"%4lu",napeti); |
122 |
printf(lcd_putc,"%4lu",adc_value); |
113 |
lcd_gotoxy(1,2); |
123 |
lcd_gotoxy(1,2); |
114 |
|
124 |
|
115 |
if(input(OUTPUT_ENABLE))printf(lcd_putc,"Set:%lu "setpoint); |
125 |
if(input(OUTPUT_ENABLE))printf(lcd_putc,"Set:%lu "setpoint); |
116 |
else printf(lcd_putc,"DISABLED"); |
126 |
else printf(lcd_putc,"DISABLED"); |
117 |
|
127 |
|
118 |
if(button_press==false ) // tlacitka se ctou znovu pouze pokud v redchozim cyklu nebyla zmacknuta. |
128 |
if(button_press==false ) // tlacitka se ctou znovu pouze pokud v redchozim cyklu nebyla zmacknuta. |
119 |
{ |
129 |
{ |
120 |
if(!input(S1)) |
130 |
if(!input(S1)) |
121 |
{ |
131 |
{ |
122 |
delay_ms(20); |
132 |
delay_ms(20); |
123 |
if(!input(S1)) |
133 |
if(!input(S1)) |
124 |
{ |
134 |
{ |
125 |
button_press=true; |
135 |
button_press=true; |
126 |
sound_beep(100,700); |
136 |
sound_beep(100,700); |
127 |
if(setpoint < (MAX_OUTPUT-5) )setpoint+=5; |
137 |
if(setpoint < (MAX_OUTPUT-5) )setpoint+=5; |
128 |
} |
138 |
} |
129 |
} |
139 |
} |
130 |
|
140 |
|
131 |
if(!input(S2)) |
141 |
if(!input(S2)) |
132 |
{ |
142 |
{ |
133 |
delay_ms(20); |
143 |
delay_ms(20); |
134 |
if(!input(S2)) |
144 |
if(!input(S2)) |
135 |
{ |
145 |
{ |
136 |
button_press=true; |
146 |
button_press=true; |
137 |
sound_beep(100,600); |
147 |
sound_beep(100,600); |
138 |
if(setpoint > 0x05 ) setpoint-=5; |
148 |
if(setpoint > 0x05 ) setpoint-=5; |
139 |
} |
149 |
} |
140 |
} |
150 |
} |
141 |
|
151 |
|
142 |
if(!input(S3)) |
152 |
if(!input(S3)) |
143 |
{ |
153 |
{ |
144 |
delay_ms(20); |
154 |
delay_ms(20); |
145 |
if(!input(S3)) |
155 |
if(!input(S3)) |
146 |
{ |
156 |
{ |
147 |
button_press=true; |
157 |
button_press=true; |
148 |
sound_beep(100,500); |
158 |
sound_beep(100,500); |
149 |
if(setpoint < MAX_OUTPUT )setpoint++; |
159 |
if(setpoint < MAX_OUTPUT )setpoint++; |
150 |
} |
160 |
} |
151 |
} |
161 |
} |
152 |
|
162 |
|
153 |
if(!input(S4)) |
163 |
if(!input(S4)) |
154 |
{ |
164 |
{ |
155 |
delay_ms(20); |
165 |
delay_ms(20); |
156 |
if(!input(S4)) |
166 |
if(!input(S4)) |
157 |
{ |
167 |
{ |
158 |
button_press=true; |
168 |
button_press=true; |
159 |
sound_beep(100,400); |
169 |
sound_beep(100,400); |
160 |
if(setpoint > 0x00 ) setpoint--; |
170 |
if(setpoint > 0x00 ) setpoint--; |
161 |
} |
171 |
} |
162 |
} |
172 |
} |
163 |
} |
173 |
} |
164 |
|
174 |
|
165 |
if ( input(S1) && input(S2) && input(S3) && input(S4) ) button_press=false; |
175 |
if ( input(S1) && input(S2) && input(S3) && input(S4) ) button_press=false; |
166 |
output_toggle(LED1); |
176 |
output_toggle(LED1); |
167 |
} |
177 |
} |
168 |
|
178 |
|
169 |
} |
179 |
} |