Rev 1661 Rev 1711
1 /******************************************************************** 1 /********************************************************************
2 FileName: HardwareProfile - Low Pin Count USB Development Kit.h 2 FileName: HardwareProfile - Low Pin Count USB Development Kit.h
3 Dependencies: See INCLUDES section 3 Dependencies: See INCLUDES section
4 Processor: PIC18 or PIC24 USB Microcontrollers 4 Processor: PIC18 or PIC24 USB Microcontrollers
5 Hardware: Low Pin Count USB Development Kit 5 Hardware: Low Pin Count USB Development Kit
6 Compiler: Microchip C18 6 Compiler: Microchip C18
7 Company: Microchip Technology, Inc. 7 Company: Microchip Technology, Inc.
8   8  
9 Software License Agreement: 9 Software License Agreement:
10   10  
11 The software supplied herewith by Microchip Technology Incorporated 11 The software supplied herewith by Microchip Technology Incorporated
12 (the “Company”) for its PIC® Microcontroller is intended and 12 (the “Company”) for its PIC® Microcontroller is intended and
13 supplied to you, the Company’s customer, for use solely and 13 supplied to you, the Company’s customer, for use solely and
14 exclusively on Microchip PIC Microcontroller products. The 14 exclusively on Microchip PIC Microcontroller products. The
15 software is owned by the Company and/or its supplier, and is 15 software is owned by the Company and/or its supplier, and is
16 protected under applicable copyright laws. All rights are reserved. 16 protected under applicable copyright laws. All rights are reserved.
17 Any use in violation of the foregoing restrictions may subject the 17 Any use in violation of the foregoing restrictions may subject the
18 user to criminal sanctions under applicable laws, as well as to 18 user to criminal sanctions under applicable laws, as well as to
19 civil liability for the breach of the terms and conditions of this 19 civil liability for the breach of the terms and conditions of this
20 license. 20 license.
21   21  
22 THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES, 22 THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
23 WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED 23 WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
24 TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 24 TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
25 PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, 25 PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
26 IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR 26 IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
27 CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. 27 CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
28   28  
29 ******************************************************************** 29 ********************************************************************
30 File Description: 30 File Description:
31   31  
32 Change History: 32 Change History:
33 Rev Date Description 33 Rev Date Description
34 1.0 11/19/2004 Initial release 34 1.0 11/19/2004 Initial release
35 2.1 02/26/2007 Updated for simplicity and to use common 35 2.1 02/26/2007 Updated for simplicity and to use common
36 coding style 36 coding style
37 2.3 09/15/2008 Broke out each hardware platform into its own 37 2.3 09/15/2008 Broke out each hardware platform into its own
38 "HardwareProfile - xxx.h" file 38 "HardwareProfile - xxx.h" file
39 ********************************************************************/ 39 ********************************************************************/
40   40  
41 #ifndef HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H 41 #ifndef HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H
42 #define HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H 42 #define HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H
43   43  
44 /*******************************************************************/ 44 /*******************************************************************/
45 /******** USB stack hardware selection options *********************/ 45 /******** USB stack hardware selection options *********************/
46 /*******************************************************************/ 46 /*******************************************************************/
47 //This section is the set of definitions required by the MCHPFSUSB 47 //This section is the set of definitions required by the MCHPFSUSB
48 // framework. These definitions tell the firmware what mode it is 48 // framework. These definitions tell the firmware what mode it is
49 // running in, and where it can find the results to some information 49 // running in, and where it can find the results to some information
50 // that the stack needs. 50 // that the stack needs.
51 //These definitions are required by every application developed with 51 //These definitions are required by every application developed with
52 // this revision of the MCHPFSUSB framework. Please review each 52 // this revision of the MCHPFSUSB framework. Please review each
53 // option carefully and determine which options are desired/required 53 // option carefully and determine which options are desired/required
54 // for your application. 54 // for your application.
55   55  
56 //#define USE_SELF_POWER_SENSE_IO 56 //#define USE_SELF_POWER_SENSE_IO
57 #define tris_self_power TRISAbits.TRISA2 // Input 57 #define tris_self_power TRISAbits.TRISA2 // Input
58 #if defined(USE_SELF_POWER_SENSE_IO) 58 #if defined(USE_SELF_POWER_SENSE_IO)
59 #define self_power PORTAbits.RA2 59 #define self_power PORTAbits.RA2
60 #else 60 #else
61 #define self_power 1 61 #define self_power 1
62 #endif 62 #endif
63   63  
64 //#define USE_USB_BUS_SENSE_IO 64 //#define USE_USB_BUS_SENSE_IO
65 #define tris_usb_bus_sense TRISAbits.TRISA1 // Input 65 #define tris_usb_bus_sense TRISAbits.TRISA1 // Input
66 #if defined(USE_USB_BUS_SENSE_IO) 66 #if defined(USE_USB_BUS_SENSE_IO)
67 #define USB_BUS_SENSE PORTAbits.RA1 67 #define USB_BUS_SENSE PORTAbits.RA1
68 #else 68 #else
69 #define USB_BUS_SENSE 1 69 #define USB_BUS_SENSE 1
70 #endif 70 #endif
71   71  
72 /*******************************************************************/ 72 /*******************************************************************/
73 /*******************************************************************/ 73 /*******************************************************************/
74 /*******************************************************************/ 74 /*******************************************************************/
75 /******** Application specific definitions *************************/ 75 /******** Application specific definitions *************************/
76 /*******************************************************************/ 76 /*******************************************************************/
77 /*******************************************************************/ 77 /*******************************************************************/
78 /*******************************************************************/ 78 /*******************************************************************/
79   79  
80 //Uncomment the following line to make the output HEX of this 80 //Uncomment the following line to make the output HEX of this
81 // project work with the HID Bootloader 81 // project work with the HID Bootloader
82 #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER 82 #define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER
83   83  
84 /** Board definition ***********************************************/ 84 /** Board definition ***********************************************/
85 //These defintions will tell the main() function which board is 85 //These defintions will tell the main() function which board is
86 // currently selected. This will allow the application to add 86 // currently selected. This will allow the application to add
87 // the correct configuration bits as wells use the correct 87 // the correct configuration bits as wells use the correct
88 // initialization functions for the board. These defitions are only 88 // initialization functions for the board. These defitions are only
89 // required in the stack provided demos. They are not required in 89 // required in the stack provided demos. They are not required in
90 // final application design. 90 // final application design.
91 91
92 #define DEMO_BOARD LOW_PIN_COUNT_USB_DEVELOPMENT_KIT 92 #define DEMO_BOARD LOW_PIN_COUNT_USB_DEVELOPMENT_KIT
93 #define LOW_PIN_COUNT_USB_DEVELOPMENT_KIT 93 #define LOW_PIN_COUNT_USB_DEVELOPMENT_KIT
94 #define CLOCK_FREQ 48000000 94 #define CLOCK_FREQ 48000000
95 95
96 /** LED ************************************************************/ 96 /** LED ************************************************************/
97 #define mInitAllLEDs() LATC &= 0xF0; TRISC &= 0xF0; 97 #define mInitAllLEDs() LATC &= 0xF0; TRISC &= 0xF0;
98 98
99 #define mLED_1 LATCbits.LATC0 99 #define mLED_1 LATCbits.LATC0
100 #define mLED_2 LATCbits.LATC1 100 #define mLED_2 LATCbits.LATC1
101 #define mLED_3 LATCbits.LATC2 101 #define mLED_3 LATCbits.LATC2
102 #define mLED_4 LATCbits.LATC3 102 #define mLED_4 LATCbits.LATC3
103 103
104 #define mGetLED_1() mLED_1 104 #define mGetLED_1() mLED_1
105 #define mGetLED_2() mLED_2 105 #define mGetLED_2() mLED_2
106 #define mGetLED_3() mLED_3 106 #define mGetLED_3() mLED_3
107 #define mGetLED_4() mLED_4 107 #define mGetLED_4() mLED_4
108   108  
109 #define mLED_1_On() mLED_1 = 1; 109 #define mLED_1_On() mLED_1 = 1;
110 #define mLED_2_On() mLED_2 = 1; 110 #define mLED_2_On() mLED_2 = 1;
111 #define mLED_3_On() mLED_3 = 1; 111 #define mLED_3_On() mLED_3 = 1;
112 #define mLED_4_On() mLED_4 = 1; 112 #define mLED_4_On() mLED_4 = 1;
113 113
114 #define mLED_1_Off() mLED_1 = 0; 114 #define mLED_1_Off() mLED_1 = 0;
115 #define mLED_2_Off() mLED_2 = 0; 115 #define mLED_2_Off() mLED_2 = 0;
116 #define mLED_3_Off() mLED_3 = 0; 116 #define mLED_3_Off() mLED_3 = 0;
117 #define mLED_4_Off() mLED_4 = 0; 117 #define mLED_4_Off() mLED_4 = 0;
118 118
119 #define mLED_1_Toggle() mLED_1 = !mLED_1; 119 #define mLED_1_Toggle() mLED_1 = !mLED_1;
120 #define mLED_2_Toggle() mLED_2 = !mLED_2; 120 #define mLED_2_Toggle() mLED_2 = !mLED_2;
121 #define mLED_3_Toggle() mLED_3 = !mLED_3; 121 #define mLED_3_Toggle() mLED_3 = !mLED_3;
122 #define mLED_4_Toggle() mLED_4 = !mLED_4; 122 #define mLED_4_Toggle() mLED_4 = !mLED_4;
123 123
124 /** SWITCH *********************************************************/ 124 /** SWITCH *********************************************************/
125 #define mInitSwitch2() //TRISAbits.TRISA3=1 125 #define mInitSwitch2() //TRISAbits.TRISA3=1
126 //only one switch available so double duty 126 //only one switch available so double duty
127 #define mInitSwitch3() //TRISAbits.TRISA3=1 127 #define mInitSwitch3() //TRISAbits.TRISA3=1
128 #define sw2 PORTAbits.RA3 128 #define sw2 PORTAbits.RA3
129 #define sw3 PORTAbits.RA3 129 #define sw3 PORTAbits.RA3
130 #define mInitAllSwitches() mInitSwitch2(); 130 #define mInitAllSwitches() mInitSwitch2();
131 131
132 /** POT ************************************************************/ 132 /** POT ************************************************************/
133 #define mInitPOT() {TRISBbits.TRISB4=1;ADCON0=0x29;ADCON1=0;ADCON2=0x3E;ADCON2bits.ADFM = 1;} 133 #define mInitPOT() {TRISBbits.TRISB4=1;ADCON0=0x29;ADCON1=0;ADCON2=0x3E;ADCON2bits.ADFM = 1;}
134   134  
135 #endif //HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H 135 #endif //HARDWARE_PROFILE_LOW_PIN_COUNT_USB_DEVELOPMENT_KIT_H