| 1 |
use <text/Write.scad> |
1 |
use <text/Write.scad> |
| 2 |
use <MLAB_logo.scad> |
2 |
use <MLAB_logo.scad> |
| 3 |
use <sloupek.scad> |
3 |
use <sloupek.scad> |
| 4 |
use <plbase.scad> |
4 |
use <plbase.scad> |
| 5 |
include <manufactury_conf.scad> |
5 |
include <manufactury_conf.scad> |
| 6 |
include <../configuration.scad> |
6 |
include <../configuration.scad> |
| 7 |
|
7 |
|
| 8 |
dno(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |
8 |
dno(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje1,vzdalenost_od_okraje2,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |
| 9 |
|
9 |
|
| 10 |
//Bočnice |
10 |
//Bočnice |
| 11 |
//------------------------------------------------------------ |
11 |
//------------------------------------------------------------ |
| 12 |
|
12 |
|
| 13 |
|
13 |
|
| 14 |
module dno(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice){ |
14 |
module dno(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje1,vzdalenost_od_okraje2,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice){ |
| 15 |
|
15 |
|
| 16 |
difference () { |
16 |
difference () { |
| 17 |
union() |
17 |
union() |
| 18 |
{ |
18 |
{ |
| 19 |
translate([-((pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje)/2,-vzdalenost_od_okraje,vyska_bocnice/2]) |
19 |
translate([-((pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2)/2,-vzdalenost_od_okraje1,vyska_bocnice/2]) |
| 20 |
rotate(a=[180,0,90]) |
20 |
rotate(a=[180,0,90]) |
| 21 |
translate([radidus_hrany,radidus_hrany,0]) |
21 |
translate([radidus_hrany,radidus_hrany,0]) |
| 22 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
22 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
| 23 |
|
23 |
|
| 24 |
//obvod |
24 |
//obvod |
| 25 |
difference () { |
25 |
difference () { |
| 26 |
|
26 |
|
| 27 |
|
27 |
|
| 28 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
28 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
| 29 |
minkowski() |
29 |
minkowski() |
| 30 |
{ |
30 |
{ |
| 31 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+4*tloustka_bocnice,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+4*tloustka_bocnice,vyska_bocnice+tloustka_plbase]); // base plastics brick |
31 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje1-2*radidus_hrany+4*tloustka_bocnice,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2-2*radidus_hrany+4*tloustka_bocnice,vyska_bocnice+tloustka_plbase]); // base plastics brick |
| 32 |
cylinder(r=radidus_hrany,h=0.01); |
32 |
cylinder(r=radidus_hrany,h=0.01); |
| 33 |
} |
33 |
} |
| 34 |
translate([-dno_vule,-dno_vule,-dno_sila_materialu]) |
34 |
translate([-dno_vule,-dno_vule,-dno_sila_materialu]) |
| 35 |
|
35 |
|
| 36 |
minkowski() |
36 |
minkowski() |
| 37 |
{ |
37 |
{ |
| 38 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,vyska_bocnice+tloustka_plbase+0.2]); // base plastics brick |
38 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje1-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,vyska_bocnice+tloustka_plbase+0.2]); // base plastics brick |
| 39 |
cylinder(r=radidus_hrany,h=0.01); |
39 |
cylinder(r=radidus_hrany,h=0.01); |
| 40 |
} |
40 |
} |
| 41 |
|
41 |
|
| 42 |
translate([tloustka_bocnice-radidus_hrany+dno_spodni_rantl,tloustka_bocnice-radidus_hrany+dno_spodni_rantl,-0.1]) |
42 |
translate([tloustka_bocnice-radidus_hrany+dno_spodni_rantl,tloustka_bocnice-radidus_hrany+dno_spodni_rantl,-0.1]) |
| 43 |
|
43 |
|
| 44 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*dno_spodni_rantl,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*dno_spodni_rantl,vyska_bocnice+tloustka_plbase+0.2]); |
44 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje1-2*dno_spodni_rantl,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2-2*dno_spodni_rantl,vyska_bocnice+tloustka_plbase+0.2]); |
| 45 |
|
45 |
|
| 46 |
|
46 |
|
| 47 |
|
47 |
|
| 48 |
} |
48 |
} |
| 49 |
|
49 |
|
| 50 |
|
50 |
|
| 51 |
|
51 |
|
| 52 |
|
52 |
|
| 53 |
|
53 |
|
| 54 |
//uchyt 1 |
54 |
//uchyt 1 |
| 55 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje-Uchyt_radius/2-Uchyt_x+0.5,-vzdalenost_od_okraje+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
55 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje2-Uchyt_radius/2-Uchyt_x+0.5,-vzdalenost_od_okraje1+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 56 |
dno_uchyt(); |
56 |
dno_uchyt(); |
| 57 |
|
57 |
|
| 58 |
//uchyt 2 |
58 |
//uchyt 2 |
| 59 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5,-vzdalenost_od_okraje+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
59 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5,-vzdalenost_od_okraje1+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 60 |
dno_uchyt(); |
60 |
dno_uchyt(); |
| 61 |
|
61 |
|
| 62 |
//uchyt 3 |
62 |
//uchyt 3 |
| 63 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje-Uchyt_radius/2-Uchyt_x+0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
63 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje2-Uchyt_radius/2-Uchyt_x+0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 64 |
dno_uchyt(); |
64 |
dno_uchyt(); |
| 65 |
|
65 |
|
| 66 |
//uchyt 4 |
66 |
//uchyt 4 |
| 67 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
67 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 68 |
dno_uchyt(); |
68 |
dno_uchyt(); |
| 69 |
|
69 |
|
| 70 |
} |
70 |
} |
| 71 |
|
71 |
|
| 72 |
//---------------------------------------------------- |
72 |
//---------------------------------------------------- |
| 73 |
//LOGO MLAB |
73 |
//LOGO MLAB |
| 74 |
/* |
74 |
/* |
| 75 |
translate([(5-(pocet_der2)*vzdalenost_der)/2,0,0]) |
75 |
translate([(5-(pocet_der2)*vzdalenost_der)/2,0,0]) |
| 76 |
translate ([0, -vzdalenost_od_okraje-tloustka_bocnice*1/2,0]) // |
76 |
translate ([0, -vzdalenost_od_okraje-tloustka_bocnice*1/2,0]) // |
| 77 |
rotate([0, 90, 270]) |
77 |
rotate([0, 90, 270]) |
| 78 |
scale(v = [logo_sirka, logo_vyska, 0.3]) |
78 |
scale(v = [logo_sirka, logo_vyska, 0.3]) |
| 79 |
MLAB_logo_short(); |
79 |
MLAB_logo_short(); |
| 80 |
*/ |
80 |
*/ |
| 81 |
|
81 |
|
| 82 |
|
82 |
|
| 83 |
|
83 |
|
| 84 |
//plbase odecet na kryt |
84 |
//plbase odecet na kryt |
| 85 |
translate([0,0,vyska_bocnice/2-tloustka_plbase/2+0.05]) |
85 |
translate([0,0,vyska_bocnice/2-tloustka_plbase/2+0.05]) |
| 86 |
rotate(a=[0,0,0]) |
86 |
rotate(a=[0,0,0]) |
| 87 |
{ |
87 |
{ |
| 88 |
plbase_vrchni_kryt_pro_odecet(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,0,tloustka_plbase+0.1); |
88 |
plbase_vrchni_kryt_pro_odecet(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje1,vzdalenost_od_okraje2,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,0,tloustka_plbase+0.1); |
| 89 |
} |
89 |
} |
| 90 |
|
90 |
|
| 91 |
|
91 |
|
| 92 |
//odstranění vrchního přebytku |
92 |
//odstranění vrchního přebytku |
| 93 |
translate([0,-20+(pocet_der2+1)*vzdalenost_der/2,vyska_bocnice/2-tloustka_plbase/2+0.05-vyska_bocnice/2+dno_vyska_ramecku]) |
93 |
translate([0,-20+(pocet_der2+1)*vzdalenost_der/2,vyska_bocnice/2-tloustka_plbase/2+0.05-vyska_bocnice/2+dno_vyska_ramecku]) |
| 94 |
cube([(pocet_der2+3)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+4*tloustka_bocnice,(pocet_der1+3)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+4*tloustka_bocnice,vyska_bocnice+tloustka_plbase], true); |
94 |
cube([(pocet_der2+3)*vzdalenost_der+2*vzdalenost_od_okraje2-2*radidus_hrany+4*tloustka_bocnice,(pocet_der1+3)*vzdalenost_der+2*vzdalenost_od_okraje1-2*radidus_hrany+4*tloustka_bocnice,vyska_bocnice+tloustka_plbase], true); |
| 95 |
|
95 |
|
| 96 |
|
96 |
|
| 97 |
//začištění vnitřku |
97 |
//začištění vnitřku |
| 98 |
|
98 |
|
| 99 |
translate([-((pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje)/2,-vzdalenost_od_okraje,vyska_bocnice/2]) |
99 |
translate([-((pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2)/2,-vzdalenost_od_okraje1,vyska_bocnice/2]) |
| 100 |
rotate(a=[180,0,90]) |
100 |
rotate(a=[180,0,90]) |
| 101 |
translate([radidus_hrany,radidus_hrany,0]) |
101 |
translate([radidus_hrany,radidus_hrany,0]) |
| 102 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
102 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
| 103 |
|
103 |
|
| 104 |
translate([-dno_vule,-dno_vule,-dno_sila_materialu]) |
104 |
translate([-dno_vule,-dno_vule,-dno_sila_materialu]) |
| 105 |
|
105 |
|
| 106 |
minkowski() |
106 |
minkowski() |
| 107 |
{ |
107 |
{ |
| 108 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,vyska_bocnice+tloustka_plbase+0.2]); // base plastics brick |
108 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje1-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2-2*radidus_hrany+2*tloustka_bocnice+2*dno_vule,vyska_bocnice+tloustka_plbase+0.2]); // base plastics brick |
| 109 |
cylinder(r=radidus_hrany,h=0.01); |
109 |
cylinder(r=radidus_hrany,h=0.01); |
| 110 |
} |
110 |
} |
| 111 |
|
111 |
|
| 112 |
|
112 |
|
| 113 |
//otvory na výčnělky horní |
113 |
//otvory na výčnělky horní |
| 114 |
|
114 |
|
| 115 |
translate([-((pocet_der2+3)*vzdalenost_der+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5)/2,-vzdalenost_od_okraje+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase+tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]) |
115 |
translate([-((pocet_der2+3)*vzdalenost_der+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5)/2,-vzdalenost_od_okraje1+vzdalenost_der/2-Uchyt_radius-0.5,-vyska_bocnice/2-tloustka_plbase+tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]) |
| 116 |
|
116 |
|
| 117 |
|
117 |
|
| 118 |
cube([((pocet_der2+3)*vzdalenost_der)+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5,Uchyt_y-2*Uchyt_radius,tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]); |
118 |
cube([((pocet_der2+3)*vzdalenost_der)+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5,Uchyt_y+1,tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]); |
| 119 |
|
119 |
|
| 120 |
translate([-((pocet_der2+3)*vzdalenost_der+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5)/2,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase+tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]) |
120 |
translate([-((pocet_der2+3)*vzdalenost_der+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5)/2,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-Uchyt_y-vzdalenost_der/2-0.5,-vyska_bocnice/2-tloustka_plbase+tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]) |
| 121 |
|
121 |
|
| 122 |
cube([((pocet_der2+3)*vzdalenost_der)+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5,Uchyt_y-2*Uchyt_radius,tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]); |
122 |
cube([((pocet_der2+3)*vzdalenost_der)+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5,Uchyt_y+1,tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]); |
| 123 |
|
123 |
|
| 124 |
} |
124 |
} |
| 125 |
} |
125 |
} |
| 126 |
|
126 |
|
| 127 |
|
127 |
|
| 128 |
|
128 |
|
| 129 |
|
129 |
|
| 130 |
//uchyt(); |
130 |
//uchyt(); |
| 131 |
|
131 |
|
| 132 |
module dno_uchyt(){ |
132 |
module dno_uchyt(){ |
| 133 |
difference () { |
133 |
difference () { |
| 134 |
minkowski() |
134 |
minkowski() |
| 135 |
{ |
135 |
{ |
| 136 |
cube([Uchyt_x-2*Uchyt_radius,Uchyt_y-2*Uchyt_radius,tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]); // base plastics brick |
136 |
cube([Uchyt_x-2*Uchyt_radius,Uchyt_y-2*Uchyt_radius,tloustka_plbase+dno_sila_materialu+dno_vule_na_matky]); // base plastics brick |
| 137 |
cylinder(r=Uchyt_radius,h=0.1); |
137 |
cylinder(r=Uchyt_radius,h=0.1); |
| 138 |
} |
138 |
} |
| 139 |
|
139 |
|
| 140 |
|
140 |
|
| 141 |
|
141 |
|
| 142 |
////otvor na sroub |
142 |
////otvor na sroub |
| 143 |
translate([(Uchyt_x)/2-Uchyt_radius,(Uchyt_y)/2-Uchyt_radius,(Uchyt_vyska_mat+M3_vyska_hlavy)/2]) |
143 |
translate([(Uchyt_x)/2-Uchyt_radius,(Uchyt_y)/2-Uchyt_radius,(Uchyt_vyska_mat+M3_vyska_hlavy)/2]) |
| 144 |
cylinder(h=Uchyt_vyska_mat+M3_vyska_hlavy+0.6, r=M3_prumer/2, center=true); |
144 |
cylinder(h=Uchyt_vyska_mat+M3_vyska_hlavy+0.6, r=M3_prumer/2, center=true); |
| 145 |
|
145 |
|
| 146 |
translate([(Uchyt_x)/2-Uchyt_radius,(Uchyt_y)/2-Uchyt_radius,-0.01]) |
146 |
translate([(Uchyt_x)/2-Uchyt_radius,(Uchyt_y)/2-Uchyt_radius,-0.01]) |
| 147 |
cylinder (h = M3_vyska_matky+0.01, r= (M3_sirka_matky+0.2)/2, $fn=6); |
147 |
cylinder (h = M3_vyska_matky+0.01, r= (M3_sirka_matky+0.2)/2, $fn=6); |
| 148 |
} |
148 |
} |
| 149 |
} |
149 |
} |
| 150 |
|
150 |
|
| 151 |
|
151 |
|
| 152 |
|
152 |
|
| 153 |
|
153 |
|