Rev 3514 Rev 3516
1 /* Name: usbconfig.h 1 /* Name: usbconfig.h
2 * Project: AVR USB driver 2 * Project: AVR USB driver
3 * Author: Christian Starkjohann, modified by Till Harbaum 3 * Author: Christian Starkjohann, modified by Till Harbaum
4 * Creation Date: 2005-04-01 4 * Creation Date: 2005-04-01
5 * Tabsize: 4 5 * Tabsize: 4
6 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH 6 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
7 * License: Proprietary, free under certain conditions. See Documentation. 7 * License: Proprietary, free under certain conditions. See Documentation.
8 * This Revision: $Id: usbconfig.h,v 1.4 2007/05/19 12:30:11 harbaum Exp $ 8 * This Revision: $Id: usbconfig.h,v 1.4 2007/05/19 12:30:11 harbaum Exp $
9 */ 9 */
10   10  
11 #ifndef __usbconfig_h_included__ 11 #ifndef __usbconfig_h_included__
12 #define __usbconfig_h_included__ 12 #define __usbconfig_h_included__
13   13  
14 /* 14 /*
15 General Description: 15 General Description:
16 This file contains parts of the USB driver which can be configured and can or 16 This file contains parts of the USB driver which can be configured and can or
17 must be adapted to your hardware. 17 must be adapted to your hardware.
18 */ 18 */
19   19  
20 /* ---------------------------- Hardware Config ---------------------------- */ 20 /* ---------------------------- Hardware Config ---------------------------- */
21   21  
22 #if! defined (__AVR_ATtiny45__) 22 #include "config.h"
-   23  
23 #define USB_CFG_IOPORTNAME C 24 #define USB_CFG_IOPORTNAME CONFIG_USB_PORT
24 /* This is the port where the USB bus is connected. When you configure it to 25 /* This is the port where the USB bus is connected. When you configure it to
25 * "PORTB", the registers PORTB, PINB (=PORTB+2) and DDRB (=PORTB+1) will be 26 * "PORTB", the registers PORTB, PINB (=PORTB+2) and DDRB (=PORTB+1) will be
26 * used. 27 * used.
27 */ 28 */
28 #define USB_CFG_DMINUS_BIT 0 29 #define USB_CFG_DMINUS_BIT CONFIG_USB_DMINUS
29 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. 30 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
30 * This MUST be bit 0. All other values will result in a compile error! 31 * This MUST be bit 0. All other values will result in a compile error!
31 */ 32 */
32 #define USB_CFG_DPLUS_BIT 1 33 #define USB_CFG_DPLUS_BIT CONFIG_USB_DPLUS
33 /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. 34 /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
34 * This may be any bit in the port. Please note that D+ must also be connected 35 * This may be any bit in the port. Please note that D+ must also be connected
35 * to interrupt pin INT0! 36 * to interrupt pin INT0!
36 */ 37 */
37 #else -  
38 #define USB_CFG_IOPORTNAME B -  
39 #define USB_CFG_DMINUS_BIT 0 -  
40 #define USB_CFG_DPLUS_BIT 2 -  
41 #endif -  
42   38  
43 /* --------------------------- Functional Range ---------------------------- */ 39 /* --------------------------- Functional Range ---------------------------- */
44   40  
45 #define USB_CFG_HAVE_INTRIN_ENDPOINT 0 41 #define USB_CFG_HAVE_INTRIN_ENDPOINT 0
46 /* Define this to 1 if you want to compile a version with two endpoints: The 42 /* Define this to 1 if you want to compile a version with two endpoints: The
47 * default control endpoint 0 and an interrupt-in endpoint 1. 43 * default control endpoint 0 and an interrupt-in endpoint 1.
48 */ 44 */
49 #define USB_CFG_INTR_POLL_INTERVAL 10 45 #define USB_CFG_INTR_POLL_INTERVAL 10
50 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll 46 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll
51 * interval. The value is in milliseconds and must not be less than 10 ms for 47 * interval. The value is in milliseconds and must not be less than 10 ms for
52 * low speed devices. 48 * low speed devices.
53 */ 49 */
54 #define USB_CFG_IS_SELF_POWERED 0 50 #define USB_CFG_IS_SELF_POWERED 0
55 /* Define this to 1 if the device has its own power supply. Set it to 0 if the 51 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
56 * device is powered from the USB bus. 52 * device is powered from the USB bus.
57 */ 53 */
58 #define USB_CFG_MAX_BUS_POWER 10 54 #define USB_CFG_MAX_BUS_POWER 10
59 /* Set this variable to the maximum USB bus power consumption of your device. 55 /* Set this variable to the maximum USB bus power consumption of your device.
60 * The value is in milliamperes. [It will be divided by two since USB 56 * The value is in milliamperes. [It will be divided by two since USB
61 * communicates power requirements in units of 2 mA.] 57 * communicates power requirements in units of 2 mA.]
62 */ 58 */
63 #define USB_CFG_SAMPLE_EXACT 1 59 #define USB_CFG_SAMPLE_EXACT 1
64 /* This variable affects Sampling Jitter for USB receiving. When it is 0, the 60 /* This variable affects Sampling Jitter for USB receiving. When it is 0, the
65 * driver guarantees a sampling window of 1/2 bit. The USB spec requires 61 * driver guarantees a sampling window of 1/2 bit. The USB spec requires
66 * that the receiver has at most 1/4 bit sampling window. The 1/2 bit window 62 * that the receiver has at most 1/4 bit sampling window. The 1/2 bit window
67 * should still work reliably enough because we work at low speed. If you want 63 * should still work reliably enough because we work at low speed. If you want
68 * to meet the spec, set this value to 1. This will unroll a loop which 64 * to meet the spec, set this value to 1. This will unroll a loop which
69 * results in bigger code size. 65 * results in bigger code size.
70 * If you have problems with long cables, try setting this value to 1. 66 * If you have problems with long cables, try setting this value to 1.
71 */ 67 */
72 #define USB_CFG_IMPLEMENT_FN_WRITE 1 68 #define USB_CFG_IMPLEMENT_FN_WRITE 1
73 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out 69 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
74 * transfers. Set it to 0 if you don't need it and want to save a couple of 70 * transfers. Set it to 0 if you don't need it and want to save a couple of
75 * bytes. 71 * bytes.
76 */ 72 */
77 #define USB_CFG_IMPLEMENT_FN_READ 1 73 #define USB_CFG_IMPLEMENT_FN_READ 1
78 /* Set this to 1 if you need to send control replies which are generated 74 /* Set this to 1 if you need to send control replies which are generated
79 * "on the fly" when usbFunctionRead() is called. If you only want to send 75 * "on the fly" when usbFunctionRead() is called. If you only want to send
80 * data from a static buffer, set it to 0 and return the data from 76 * data from a static buffer, set it to 0 and return the data from
81 * usbFunctionSetup(). This saves a couple of bytes. 77 * usbFunctionSetup(). This saves a couple of bytes.
82 */ 78 */
83   79  
84 /* -------------------------- Device Description --------------------------- */ 80 /* -------------------------- Device Description --------------------------- */
85   81  
86 #define USB_CFG_VENDOR_ID 0x03, 0x04 82 #define USB_CFG_VENDOR_ID 0x03, 0x04
87 /* USB vendor ID for the device, low byte first. */ 83 /* USB vendor ID for the device, low byte first. */
88 #define USB_CFG_DEVICE_ID 0x31, 0xc6 84 #define USB_CFG_DEVICE_ID 0x31, 0xc6
89 /* This is the ID of the device, low byte first. It is interpreted in the 85 /* This is the ID of the device, low byte first. It is interpreted in the
90 * scope of the vendor ID. The only requirement is that no two devices may 86 * scope of the vendor ID. The only requirement is that no two devices may
91 * share the same product and vendor IDs. Not even if the devices are never 87 * share the same product and vendor IDs. Not even if the devices are never
92 * on the same bus together! 88 * on the same bus together!
93 */ 89 */
94 #define USB_CFG_DEVICE_VERSION 0x05, 0x01 90 #define USB_CFG_DEVICE_VERSION 0x05, 0x01
95 /* Version number of the device: Minor number first, then major number. 91 /* Version number of the device: Minor number first, then major number.
96 */ 92 */
97 #define USB_CFG_VENDOR_NAME 'T', 'i', 'l', 'l', ' ', 'H', 'a', 'r', 'b', 'a', 'u', 'm' 93 #define USB_CFG_VENDOR_NAME 'T', 'i', 'l', 'l', ' ', 'H', 'a', 'r', 'b', 'a', 'u', 'm'
98 #define USB_CFG_VENDOR_NAME_LEN 12 94 #define USB_CFG_VENDOR_NAME_LEN 12
99 /* These two values define the vendor name returned by the USB device. The name 95 /* These two values define the vendor name returned by the USB device. The name
100 * must be given as a list of characters under single quotes. The characters 96 * must be given as a list of characters under single quotes. The characters
101 * are interpreted as Unicode (UTF-16) entities. 97 * are interpreted as Unicode (UTF-16) entities.
102 * If you don't want a vendor name string, undefine these macros. 98 * If you don't want a vendor name string, undefine these macros.
103 */ 99 */
104 #define USB_CFG_DEVICE_NAME 'i','2','c','-','t','i','n','y','-','u','s','b' 100 #define USB_CFG_DEVICE_NAME 'i','2','c','-','t','i','n','y','-','u','s','b'
105 #define USB_CFG_DEVICE_NAME_LEN 12 101 #define USB_CFG_DEVICE_NAME_LEN 12
106 /* Same as above for the device name. If you don't want a device name, undefine 102 /* Same as above for the device name. If you don't want a device name, undefine
107 * the macros. 103 * the macros.
108 */ 104 */
109 #define USB_CFG_DEVICE_CLASS 0xff 105 #define USB_CFG_DEVICE_CLASS 0xff
110 #define USB_CFG_DEVICE_SUBCLASS 0 106 #define USB_CFG_DEVICE_SUBCLASS 0
111 /* See USB specification if you want to conform to an existing device class. 107 /* See USB specification if you want to conform to an existing device class.
112 */ 108 */
113 #define USB_CFG_INTERFACE_CLASS 0 109 #define USB_CFG_INTERFACE_CLASS 0
114 #define USB_CFG_INTERFACE_SUBCLASS 0 110 #define USB_CFG_INTERFACE_SUBCLASS 0
115 #define USB_CFG_INTERFACE_PROTOCOL 0 111 #define USB_CFG_INTERFACE_PROTOCOL 0
116 /* See USB specification if you want to conform to an existing device class or 112 /* See USB specification if you want to conform to an existing device class or
117 * protocol. 113 * protocol.
118 */ 114 */
119   115  
120   116  
121 #endif /* __usbconfig_h_included__ */ 117 #endif /* __usbconfig_h_included__ */