Rev 257 Rev 258
1 <?php 1 <?php
2 # vim:et:ts=3:sts=3:sw=3:fdm=marker: 2 # vim:et:ts=3:sts=3:sw=3:fdm=marker:
3   3  
4 // WebSVN - Subversion repository viewing via the web using PHP 4 // WebSVN - Subversion repository viewing via the web using PHP
5 // Copyright © 2004-2006 Tim Armes, Matt Sicker 5 // Copyright © 2004-2006 Tim Armes, Matt Sicker
6 // 6 //
7 // This program is free software; you can redistribute it and/or modify 7 // This program is free software; you can redistribute it and/or modify
8 // it under the terms of the GNU General Public License as published by 8 // it under the terms of the GNU General Public License as published by
9 // the Free Software Foundation; either version 2 of the License, or 9 // the Free Software Foundation; either version 2 of the License, or
10 // (at your option) any later version. 10 // (at your option) any later version.
11 // 11 //
12 // This program is distributed in the hope that it will be useful, 12 // This program is distributed in the hope that it will be useful,
13 // but WITHOUT ANY WARRANTY; without even the implied warranty of 13 // but WITHOUT ANY WARRANTY; without even the implied warranty of
14 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 // GNU General Public License for more details. 15 // GNU General Public License for more details.
16 // 16 //
17 // You should have received a copy of the GNU General Public License 17 // You should have received a copy of the GNU General Public License
18 // along with this program; if not, write to the Free Software 18 // along with this program; if not, write to the Free Software
19 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 // 20 //
21 // -- 21 // --
22 // 22 //
23 // config.inc 23 // config.inc
24 // 24 //
25 // Configuration parameters 25 // Configuration parameters
26   26  
27 // --- FOLLOW THE INSTRUCTIONS BELOW TO CONFIGURE YOUR SETUP --- 27 // --- FOLLOW THE INSTRUCTIONS BELOW TO CONFIGURE YOUR SETUP ---
28   28  
29 // {{{ PLATFORM CONFIGURATION --- 29 // {{{ PLATFORM CONFIGURATION ---
30   30  
31 // Uncomment the next line if your running a windows server 31 // Uncomment the next line if your running a windows server
32 // 32 //
33 // $config->setServerIsWindows(); 33 // $config->setServerIsWindows();
34   34  
35 // Configure these lines if your commands aren't on your path. 35 // Configure these lines if your commands aren't on your path.
36 // 36 //
37 // $config->setSVNCommandPath('Path/to/svn and svnlook/ e.g. c:\\program files\\subversion\\bin'); 37 // $config->setSVNCommandPath('Path/to/svn and svnlook/ e.g. c:\\program files\\subversion\\bin');
38 // $config->setDiffPath('Path/to/diff/command/'); 38 // $config->setDiffPath('Path/to/diff/command/');
39   39  
40 // For syntax colouring, if option enabled... 40 // For syntax colouring, if option enabled...
41 // $config->setEnscriptPath('Path/to/enscript/command/'); 41 // $config->setEnscriptPath('Path/to/enscript/command/');
42 // $config->setSedPath('Path/to/sed/command/'); 42 // $config->setSedPath('Path/to/sed/command/');
43   43  
44 // For delivered tarballs, if option enabled... 44 // For delivered tarballs, if option enabled...
45 // $config->setTarPath('Path/to/tar/command/'); 45 // $config->setTarPath('Path/to/tar/command/');
46   46  
47 // For delivered GZIP'd files and tarballs, if option enabled... 47 // For delivered GZIP'd files and tarballs, if option enabled...
48 // $config->setGZipPath('Path/to/gzip/command/'); 48 // $config->setGZipPath('Path/to/gzip/command/');
49   49  
50 // }}} 50 // }}}
51   51  
52 // {{{ REPOSITORY SETUP --- 52 // {{{ REPOSITORY SETUP ---
53   53  
54 // There are 2 methods for defining the repositiories available on the system. Either you list 54 // There are 2 methods for defining the repositiories available on the system. Either you list
55 // them by hand, in which case you can give each one the name of your choice, or you use the 55 // them by hand, in which case you can give each one the name of your choice, or you use the
56 // parent path function, in which case the name of the directory is used as the repository name. 56 // parent path function, in which case the name of the directory is used as the repository name.
57 // 57 //
58 // In all cases, you may optionally supply a group name to the repositories. This is useful in the 58 // In all cases, you may optionally supply a group name to the repositories. This is useful in the
59 // case that you need to separate your projects. Grouped Repositories are referred to using the 59 // case that you need to separate your projects. Grouped Repositories are referred to using the
60 // convention GroupName.RepositoryName 60 // convention GroupName.RepositoryName
61 // 61 //
62 // Performance is much better on local repositories (e.g. accessed by file:///). However, you 62 // Performance is much better on local repositories (e.g. accessed by file:///). However, you
63 // can also provide an interface onto a remote repository. In this case you should supply the 63 // can also provide an interface onto a remote repository. In this case you should supply the
64 // username and password needed to access it. 64 // username and password needed to access it.
65 // 65 //
66 // To configure the repositories by hand, copy the appropriate line below, uncomment it and 66 // To configure the repositories by hand, copy the appropriate line below, uncomment it and
67 // replace the name and URL of your repository. 67 // replace the name and URL of your repository.
68   68  
69 // Local repositories (without and with optional group): 69 // Local repositories (without and with optional group):
70 // 70 //
71 // $config->addRepository('NameToDisplay', 'URL to repository (e.g. file:///c:/svn/proj)'); 71 // $config->addRepository('NameToDisplay', 'URL to repository (e.g. file:///c:/svn/proj)');
72 // $config->addRepository('NameToDisplay', 'URL to repository (e.g. file:///c:/svn/proj)', 'group'); 72 // $config->addRepository('NameToDisplay', 'URL to repository (e.g. file:///c:/svn/proj)', 'group');
73 $config->addRepository('MLAB', 'file:///home/MLAB'); 73 $config->addRepository('MLAB', 'file:///home/MLAB');
74 $config->addRepository('TEST1', 'file:///home/MLAB'); 74 $config->addRepository('TEST1', 'file:///home/MLAB');
75 $config->addRepository('TEST2', 'file:///home/MLAB'); 75 $config->addRepository('TEST2', 'file:///home/MLAB');
76 // 76 //
77 // Remote repositories (without and with optional group): 77 // Remote repositories (without and with optional group):
78 // 78 //
79 // $config->addRepository('NameToDisplay', 'URL (e.g. http://path/to/rep)', NULL, 'username', 'password'); 79 // $config->addRepository('NameToDisplay', 'URL (e.g. http://path/to/rep)', NULL, 'username', 'password');
80 // $config->addRepository('NameToDisplay', 'URL (e.g. http://path/to/rep)', 'group', 'username', 'password'); 80 // $config->addRepository('NameToDisplay', 'URL (e.g. http://path/to/rep)', 'group', 'username', 'password');
81 // 81 //
82 // To use the parent path method, uncomment the newt line and and replace the path with your one. You 82 // To use the parent path method, uncomment the newt line and and replace the path with your one. You
83 // can call the function several times if you have several parent paths. Note that in this case the 83 // can call the function several times if you have several parent paths. Note that in this case the
84 // path is a filesystem path 84 // path is a filesystem path
85 // 85 //
86 // $config->parentPath('Path/to/parent (e.g. c:\\svn)'); 86 // $config->parentPath('Path/to/parent (e.g. c:\\svn)');
87   87  
88 // }}} 88 // }}}
89   89  
90 // {{{ LOOK AND FEEL --- 90 // {{{ LOOK AND FEEL ---
91 // 91 //
92 // Uncomment ONLY the template file that you want. 92 // Uncomment ONLY the template file that you want.
93   93  
94 // $config->setTemplatePath("$locwebsvnreal/templates/Standard/"); 94 // $config->setTemplatePath("$locwebsvnreal/templates/Standard/");
95 // $config->setTemplatePath("$locwebsvnreal/templates/BlueGrey/"); 95 // $config->setTemplatePath("$locwebsvnreal/templates/BlueGrey/");
96 // $config->setTemplatePath("$locwebsvnreal/templates/Zinn/"); 96 // $config->setTemplatePath("$locwebsvnreal/templates/Zinn/");
97   97  
98 // You may also specify a per repository template file by uncommenting and changing the following 98 // You may also specify a per repository template file by uncommenting and changing the following
99 // line as necessary. Use the convention "groupname.myrep" if your repository is in a group. 99 // line as necessary. Use the convention "groupname.myrep" if your repository is in a group.
100   100  
101 // $config->setTemplatePath('$locwebsvnreal/templates/Standard/', 'myrep'); // Access file for myrep 101 // $config->setTemplatePath('$locwebsvnreal/templates/Standard/', 'myrep'); // Access file for myrep
102 $config->setTemplatePath("$locwebsvnreal/templates/MLAB/", "MLAB"); 102 $config->setTemplatePath("$locwebsvnreal/templates/MLAB/", "MLAB");
103 $config->setTemplatePath("$locwebsvnreal/templates/BlueGrey/", "TEST1"); 103 $config->setTemplatePath("$locwebsvnreal/templates/BlueGrey/", "TEST1");
104 $config->setTemplatePath("$locwebsvnreal/templates/Standard/", "TEST2"); 104 $config->setTemplatePath("$locwebsvnreal/templates/Standard/", "TEST2");
105   105  
106 // The index page containing the projects may either be displayed as a flat view (the default), 106 // The index page containing the projects may either be displayed as a flat view (the default),
107 // where grouped repositories are displayed as "GroupName.RepName" or as a tree view. 107 // where grouped repositories are displayed as "GroupName.RepName" or as a tree view.
108 // In the case of a tree view, you may choose whether the entire tree is open by default. 108 // In the case of a tree view, you may choose whether the entire tree is open by default.
109   109  
110 // $config->useTreeIndex(false); // Tree index, closed by default 110 // $config->useTreeIndex(false); // Tree index, closed by default
111 // $config->useTreeIndex(true); // Tree index, open by default 111 // $config->useTreeIndex(true); // Tree index, open by default
112   112  
113 // By default, WebSVN displays a tree view onto the current directory. You can however 113 // By default, WebSVN displays a tree view onto the current directory. You can however
114 // choose to display a flat view of the current directory only, which may make the display 114 // choose to display a flat view of the current directory only, which may make the display
115 // load faster. Uncomment this line if you want that. 115 // load faster. Uncomment this line if you want that.
116   116  
117 // $config->useFlatView(); 117 // $config->useFlatView();
118   118  
119 // }}} 119 // }}}
120   120  
121 // {{{ LANGUAGE SETUP --- 121 // {{{ LANGUAGE SETUP ---
122   122  
123 // WebSVN uses the iconv module to convert messages from your system's character set to the 123 // WebSVN uses the iconv module to convert messages from your system's character set to the
124 // UTF-8 output encoding. If you find that your log messages aren't displayed correctly then 124 // UTF-8 output encoding. If you find that your log messages aren't displayed correctly then
125 // you'll need to change the value here. 125 // you'll need to change the value here.
126 // 126 //
127 // You may also specify the character encoding of the repository contents if different from 127 // You may also specify the character encoding of the repository contents if different from
128 // the system encoding. This is typically the case for windows users, whereby the command 128 // the system encoding. This is typically the case for windows users, whereby the command
129 // line returns, for example, CP850 encoded strings, whereas the source files are encoded 129 // line returns, for example, CP850 encoded strings, whereas the source files are encoded
130 // as iso-8859-1 by Windows based text editors. When display text file, WebSVN will convert 130 // as iso-8859-1 by Windows based text editors. When display text file, WebSVN will convert
131 // them from the content encoding to the output encoding (UTF-8). 131 // them from the content encoding to the output encoding (UTF-8).
132 // 132 //
133 // WebSVN does its best to automate all this, so only use the following if it doesn't work 133 // WebSVN does its best to automate all this, so only use the following if it doesn't work
134 // "out of the box". Uncomment and change one of the examples below. 134 // "out of the box". Uncomment and change one of the examples below.
135 // 135 //
136 // $config->setInputEncoding('CP850'); // Encoding of result returned by svn command line, etc. 136 // $config->setInputEncoding('CP850'); // Encoding of result returned by svn command line, etc.
137 // $config->setContentEncoding('iso-8859-1'); // Content encoding of all your repositories // repositories 137 // $config->setContentEncoding('iso-8859-1'); // Content encoding of all your repositories // repositories
138   138  
139 // You may also specify a content encoding on a per repository basis. Uncomment and copy this 139 // You may also specify a content encoding on a per repository basis. Uncomment and copy this
140 // line as necessary. 140 // line as necessary.
141 // 141 //
142 // $config->setContentEncoding('iso-8859-1', 'MyEnc'); 142 // $config->setContentEncoding('iso-8859-1', 'MyEnc');
143   143  
144 // Note for Windows users: To enable iconv you'll need to enable the extension in your php.ini file 144 // Note for Windows users: To enable iconv you'll need to enable the extension in your php.ini file
145 // AND copy iconv.dll (not php_iconv.dll) to your Windows system folder. In most cases the correct 145 // AND copy iconv.dll (not php_iconv.dll) to your Windows system folder. In most cases the correct
146 // encoding is set when you call $config->setServerIsWindows();. 146 // encoding is set when you call $config->setServerIsWindows();.
147   147  
148 // Note for *nix users. You'll need to have iconv compiled into your binary. The default input and 148 // Note for *nix users. You'll need to have iconv compiled into your binary. The default input and
149 // output encodings are taken from your locale informations. Override these if they aren't correct. 149 // output encodings are taken from your locale informations. Override these if they aren't correct.
150   150  
151 // Uncomment the default language. If you want English then don't do anything here. 151 // Uncomment the default language. If you want English then don't do anything here.
152 // 152 //
153   153  
154 include 'languages/czech.inc'; 154 include 'languages/czech.inc';
155 // include 'languages/catalan.inc'; 155 // include 'languages/catalan.inc';
156 // include 'languages/danish.inc'; 156 // include 'languages/danish.inc';
157 // include 'languages/dutch.inc'; 157 // include 'languages/dutch.inc';
158 // include 'languages/finnish.inc'; 158 // include 'languages/finnish.inc';
159 // include 'languages/french.inc'; 159 // include 'languages/french.inc';
160 // include 'languages/german.inc'; 160 // include 'languages/german.inc';
161 // include 'languages/japanese.inc'; 161 // include 'languages/japanese.inc';
162 // include 'languages/korean.inc'; 162 // include 'languages/korean.inc';
163 // include 'languages/norwegian.inc'; 163 // include 'languages/norwegian.inc';
164 // include 'languages/polish.inc'; 164 // include 'languages/polish.inc';
165 // include 'languages/portuguese.inc'; 165 // include 'languages/portuguese.inc';
166 // include 'languages/russian.inc'; 166 // include 'languages/russian.inc';
167 // include 'languages/schinese.inc'; 167 // include 'languages/schinese.inc';
168 // include 'languages/slovenian.inc'; 168 // include 'languages/slovenian.inc';
169 // include 'languages/spanish.inc'; 169 // include 'languages/spanish.inc';
170 // include 'languages/swedish.inc'; 170 // include 'languages/swedish.inc';
171 // include 'languages/tchinese.inc'; 171 // include 'languages/tchinese.inc';
172 // include 'languages/turkish.inc'; 172 // include 'languages/turkish.inc';
173   173  
174 // }}} 174 // }}}
175   175  
176 // {{{ MULTIVIEWS --- 176 // {{{ MULTIVIEWS ---
177   177  
178 // Uncomment this line if you want to use MultiView to access the repository by, for example: 178 // Uncomment this line if you want to use MultiView to access the repository by, for example:
179 // 179 //
180 // http://servername/wsvn/repname/path/in/repository 180 // http://servername/wsvn/repname/path/in/repository
181 // 181 //
182 // Note: The websvn directory will need to have Multiviews turned on in Apache, and you'll need to configure 182 // Note: The websvn directory will need to have Multiviews turned on in Apache, and you'll need to configure
183 // wsvn.php 183 // wsvn.php
184   184  
185 // $config->useMultiViews(); 185 // $config->useMultiViews();
186   186  
187 // }}} 187 // }}}
188   188  
189 // {{{ ACCESS RIGHTS --- 189 // {{{ ACCESS RIGHTS ---
190   190  
191 // Uncomment this line if you want to use your Subversion access file to control access 191 // Uncomment this line if you want to use your Subversion access file to control access
192 // rights via WebSVN. For this to work, you'll need to set up the same Apache based authentication 192 // rights via WebSVN. For this to work, you'll need to set up the same Apache based authentication
193 // to the WebSVN (or wsvn) directory as you have for Subversion itself. More information can be 193 // to the WebSVN (or wsvn) directory as you have for Subversion itself. More information can be
194 // found in install.txt 194 // found in install.txt
195   195  
196 // $config->useAuthenticationFile('/path/to/accessfile'); // Global access file 196 // $config->useAuthenticationFile('/path/to/accessfile'); // Global access file
197   197  
198 // You may also specify a per repository access file by uncommenting and copying the following 198 // You may also specify a per repository access file by uncommenting and copying the following
199 // line as necessary. Use the convention 'groupname.myrep' if your repository is in a group. 199 // line as necessary. Use the convention 'groupname.myrep' if your repository is in a group.
200   200  
201 // $config->useAuthenticationFile('/path/to/accessfile', 'myrep'); // Access file for myrep 201 // $config->useAuthenticationFile('/path/to/accessfile', 'myrep'); // Access file for myrep
202   202  
203 // }}} 203 // }}}
204   204  
205 // {{{ FILE CONTENT --- 205 // {{{ FILE CONTENT ---
206 // 206 //
207 // You may wish certain file types to be GZIP'd and delieved to the user when clicked apon. 207 // You may wish certain file types to be GZIP'd and delieved to the user when clicked apon.
208 // This is useful for binary files and the like that don't display well in a browser window! 208 // This is useful for binary files and the like that don't display well in a browser window!
209 // Copy, uncomment and modify this line for each extension to which this rule should apply. 209 // Copy, uncomment and modify this line for each extension to which this rule should apply.
210 // (Don't forget the . before the extension. You don't need an index between the []'s). 210 // (Don't forget the . before the extension. You don't need an index between the []'s).
211 // If you'd rather that the files were delivered uncompressed with the associated MIME type, 211 // If you'd rather that the files were delivered uncompressed with the associated MIME type,
212 // then read below. 212 // then read below.
213 // 213 //
214 // $zipped[] = '.dll'; 214 // $zipped[] = '.dll';
215   215  
216 // Subversion controlled files have an svn:mime-type property that can 216 // Subversion controlled files have an svn:mime-type property that can
217 // be set on a file indicating its mime type. By default binary files 217 // be set on a file indicating its mime type. By default binary files
218 // are set to the generic appcliation/octet-stream, and other files 218 // are set to the generic appcliation/octet-stream, and other files
219 // don't have it set at all. WebSVN also has a built-in list of 219 // don't have it set at all. WebSVN also has a built-in list of
220 // associations from file extension to MIME content type. (You can 220 // associations from file extension to MIME content type. (You can
221 // view this list in setup.inc). 221 // view this list in setup.inc).
222 // 222 //
223 // Determining the content-type: By default, if the svn:mime-type 223 // Determining the content-type: By default, if the svn:mime-type
224 // property exists and is different from application/octet-stream, it 224 // property exists and is different from application/octet-stream, it
225 // is used. Otherwise, if the built-in list has a contentType entry 225 // is used. Otherwise, if the built-in list has a contentType entry
226 // for the extension of the file, that is used. Otherwise, if the 226 // for the extension of the file, that is used. Otherwise, if the
227 // svn:mime-type property exists has the generic binary value of 227 // svn:mime-type property exists has the generic binary value of
228 // application/octet-stream, the file will be served as a binary 228 // application/octet-stream, the file will be served as a binary
229 // file. Otherwise, the file will be brought up as ASCII text in the 229 // file. Otherwise, the file will be brought up as ASCII text in the
230 // browser window (although this text may optionally be colourised. 230 // browser window (although this text may optionally be colourised.
231 // See below). 231 // See below).
232 // 232 //
233 // Uncomment this if you want to ignore any svn:mime-type property on your 233 // Uncomment this if you want to ignore any svn:mime-type property on your
234 // files. 234 // files.
235 // 235 //
236 // $config->ignoreSvnMimeTypes(); 236 // $config->ignoreSvnMimeTypes();
237 // 237 //
238 // Uncomment this if you want skip WebSVN's custom mime-type handling 238 // Uncomment this if you want skip WebSVN's custom mime-type handling
239 // 239 //
240 // $config->ignoreWebSVNContentTypes(); 240 // $config->ignoreWebSVNContentTypes();
241 // 241 //
242 // Following the examples below, you can add new associations, modify 242 // Following the examples below, you can add new associations, modify
243 // the default ones or even delete them entirely (to show them in 243 // the default ones or even delete them entirely (to show them in
244 // ASCII via WebSVN). 244 // ASCII via WebSVN).
245   245  
246 // $contentType['.c'] = 'plain/text'; // Create a new association 246 // $contentType['.c'] = 'plain/text'; // Create a new association
247 // $contentType['.doc'] = 'plain/text'; // Modify an existing one 247 // $contentType['.doc'] = 'plain/text'; // Modify an existing one
248 // unset($contentType['.m'] // Remove a default association 248 // unset($contentType['.m'] // Remove a default association
249   249  
250 // }}} 250 // }}}
251   251  
252 // {{{ TARBALLS --- 252 // {{{ TARBALLS ---
253   253  
254 // You need tar and gzip installed on your system. Set the paths above if necessary 254 // You need tar and gzip installed on your system. Set the paths above if necessary
255 // 255 //
256 // Uncomment the line below to offer a tarball download option across all your 256 // Uncomment the line below to offer a tarball download option across all your
257 // repositories. 257 // repositories.
258 // 258 //
259 $config->allowDownload(); 259 $config->allowDownload();
260 // 260 //
261 // To change the global option for individual repositories, uncomment and replicate 261 // To change the global option for individual repositories, uncomment and replicate
262 // the required line below (replacing 'myrep' for the name of the repository to be changed). 262 // the required line below (replacing 'myrep' for the name of the repository to be changed).
263 // Use the convention 'groupname.myrep' if your repository is in a group. 263 // Use the convention 'groupname.myrep' if your repository is in a group.
264   264  
265 // $config->allowDownload('myrep'); // Specifically allow downloading for 'myrep' 265 // $config->allowDownload('myrep'); // Specifically allow downloading for 'myrep'
266 // $config->disallowDownload('myrep'); // Specifically disallow downloading for 'myrep' 266 // $config->disallowDownload('myrep'); // Specifically disallow downloading for 'myrep'
267   267  
268 // You can also choose the minimum directory level from which you'll allow downloading. 268 // You can also choose the minimum directory level from which you'll allow downloading.
269 // A value of zero will allow downloading from the root. 1 will allow downloding of directories 269 // A value of zero will allow downloading from the root. 1 will allow downloding of directories
270 // in the root, etc. 270 // in the root, etc.
271 // 271 //
272 // If your project is arranged with trunk, tags and branches at the root level, then a value of 2 272 // If your project is arranged with trunk, tags and branches at the root level, then a value of 2
273 // would allow the downloading of directories within branches/tags while disallowing the download 273 // would allow the downloading of directories within branches/tags while disallowing the download
274 // of the entire branches or tags directories. This would also stop downloading of the trunk, but 274 // of the entire branches or tags directories. This would also stop downloading of the trunk, but
275 // see after for path exceptions. 275 // see after for path exceptions.
276 // 276 //
277 // Change the line below to set the download level across all your repositories. 277 // Change the line below to set the download level across all your repositories.
278   278  
279 $config->setMinDownloadLevel(1); 279 $config->setMinDownloadLevel(0);
280   280  
281 // To change the level for individual repositories, uncomment and replicate 281 // To change the level for individual repositories, uncomment and replicate
282 // the required line below (replacing 'myrep' for the name of the repository to be changed). 282 // the required line below (replacing 'myrep' for the name of the repository to be changed).
283 // Use the convention 'groupname.myrep' if your repository is in a group. 283 // Use the convention 'groupname.myrep' if your repository is in a group.
284   284  
285 // $config->setMinDownloadLevel(2, 'myrep'); 285 // $config->setMinDownloadLevel(2, 'myrep');
286   286  
287 // Finally, you may add or remove certain directories (and their contents) either globally 287 // Finally, you may add or remove certain directories (and their contents) either globally
288 // or on a per repository basis. Uncomment and copy the following lines as necessary. Note 288 // or on a per repository basis. Uncomment and copy the following lines as necessary. Note
289 // that the these are searched in the order than you give them until a match is made (with the 289 // that the these are searched in the order than you give them until a match is made (with the
290 // exception that all the per repository exceptions are tested before the global ones). This means 290 // exception that all the per repository exceptions are tested before the global ones). This means
291 // that you must disallow /a/b/c/ before you allow /a/b/ otherwise the allowed match on /a/b/ will 291 // that you must disallow /a/b/c/ before you allow /a/b/ otherwise the allowed match on /a/b/ will
292 // stop any further searching, thereby allowing downloads on /a/b/c/. 292 // stop any further searching, thereby allowing downloads on /a/b/c/.
293   293  
294 // Global exceptions possibilties: 294 // Global exceptions possibilties:
295 // 295 //
296 // $config->addAllowedDownloadException('/path/to/allowed/directory/'); 296 // $config->addAllowedDownloadException('/path/to/allowed/directory/');
297 // $config->addDisAllowedDownloadException('/path/to/disallowed/directory/'); 297 // $config->addDisAllowedDownloadException('/path/to/disallowed/directory/');
298 // 298 //
299 // Per repository exception possibilties: 299 // Per repository exception possibilties:
300 // Use the convention 'groupname.myrep' if your repository is in a group. 300 // Use the convention 'groupname.myrep' if your repository is in a group.
301 // 301 //
302 // $config->addAllowedDownloadException('/path/to/allowed/directory/', 'myrep'); 302 // $config->addAllowedDownloadException('/path/to/allowed/directory/', 'myrep');
303 // $config->addDisAllowedDownloadException('/path/to/disallowed/directory/', 'myrep'); 303 // $config->addDisAllowedDownloadException('/path/to/disallowed/directory/', 'myrep');
304   304  
305 // }}} 305 // }}}
306   306  
307 // {{{ COLOURISATION --- 307 // {{{ COLOURISATION ---
308   308  
309 // Uncomment this line if you want to use Enscript to colourise your file listings 309 // Uncomment this line if you want to use Enscript to colourise your file listings
310 // 310 //
311 // You'll need Enscript version 1.6 or higher AND Sed installed to use this feature. 311 // You'll need Enscript version 1.6 or higher AND Sed installed to use this feature.
312 // Set the path above. 312 // Set the path above.
313 // 313 //
314 // $config->useEnscript(); 314 // $config->useEnscript();
315   315  
316 // Enscript need to be told what the contents of a file are so that it can be colourised 316 // Enscript need to be told what the contents of a file are so that it can be colourised
317 // correctly. WebSVN includes a predefined list of mappings from file extension to Enscript 317 // correctly. WebSVN includes a predefined list of mappings from file extension to Enscript
318 // file type (viewable in setup.inc). 318 // file type (viewable in setup.inc).
319 // 319 //
320 // Here you should add and other extensions not already listed or redefine the default ones. eg: 320 // Here you should add and other extensions not already listed or redefine the default ones. eg:
321 // 321 //
322 // $extEnscript['.pas'] = 'pascal'; 322 // $extEnscript['.pas'] = 'pascal';
323 // 323 //
324 // Note that extensions are case sensitive. 324 // Note that extensions are case sensitive.
325   325  
326 // }}} 326 // }}}
327   327  
328 // {{{ RSSFEED --- 328 // {{{ RSSFEED ---
329   329  
330 // Uncomment this line if you wish to hide the RSS feed links across all repositories 330 // Uncomment this line if you wish to hide the RSS feed links across all repositories
331 // 331 //
332 // $config->hideRSS(); 332 // $config->hideRSS();
333 // 333 //
334 // To change the global option for individual repositories, uncomment and replicate 334 // To change the global option for individual repositories, uncomment and replicate
335 // the required line below (replacing 'myrep' for the name of the repository to be changed). 335 // the required line below (replacing 'myrep' for the name of the repository to be changed).
336 // Use the convention 'groupname.myrep' if your repository is in a group. 336 // Use the convention 'groupname.myrep' if your repository is in a group.
337   337  
338 // $config->hideRSS('myrep'); // Specifically hide RSS links for 'myrep' 338 // $config->hideRSS('myrep'); // Specifically hide RSS links for 'myrep'
339 // $config->showRSS('myrep'); // Specifically show RSS links for 'myrep' 339 // $config->showRSS('myrep'); // Specifically show RSS links for 'myrep'
340   340  
341 // }}} 341 // }}}
342   342  
343 // {{{ BUGTRAQ --- 343 // {{{ BUGTRAQ ---
344   344  
345 // Uncomment this line if you wish to use bugtraq: properties to show links to your BugTracker 345 // Uncomment this line if you wish to use bugtraq: properties to show links to your BugTracker
346 // from the log messages. 346 // from the log messages.
347 // 347 //
348 // $config->useBugtraqProperties(); 348 // $config->useBugtraqProperties();
349 // 349 //
350 // To change the global option for individual repositories, uncomment and replicate 350 // To change the global option for individual repositories, uncomment and replicate
351 // the required line below (replacing 'myrep' for the name of the repository to be changed). 351 // the required line below (replacing 'myrep' for the name of the repository to be changed).
352 // Use the convention 'groupname.myrep' if your repository is in a group. 352 // Use the convention 'groupname.myrep' if your repository is in a group.
353   353  
354 // $config->useBugtraqProperties('myrep'); // Specifically use bugtraq properties for 'myrep' 354 // $config->useBugtraqProperties('myrep'); // Specifically use bugtraq properties for 'myrep'
355 // $config->ignoreBugtraqProperties('myrep'); // Specifically ignore bugtraq properties for 'myrep' 355 // $config->ignoreBugtraqProperties('myrep'); // Specifically ignore bugtraq properties for 'myrep'
356   356  
357 // }}} 357 // }}}
358   358  
359 // {{{ MISCELLANEOUS --- 359 // {{{ MISCELLANEOUS ---
360   360  
361 // Comment out this if you don't have the right to use it. Be warned that you may need it however! 361 // Comment out this if you don't have the right to use it. Be warned that you may need it however!
362 set_time_limit(0); 362 set_time_limit(0);
363   363  
364 // Comment this line to turn off caching of repo information. This will slow down your browsing. 364 // Comment this line to turn off caching of repo information. This will slow down your browsing.
365 $config->setCachingOn(); 365 $config->setCachingOn();
366   366  
367 // Number of spaces to expand tabs to in diff/listing view across all repositories 367 // Number of spaces to expand tabs to in diff/listing view across all repositories
368   368  
369 $config->expandTabsBy(8); 369 $config->expandTabsBy(8);
370   370  
371 // To change the global option for individual repositories, uncomment and replicate 371 // To change the global option for individual repositories, uncomment and replicate
372 // the required line below (replacing 'myrep' for the name of the repository to be changed). 372 // the required line below (replacing 'myrep' for the name of the repository to be changed).
373 // Use the convention 'groupname.myrep' if your repository is in a group. 373 // Use the convention 'groupname.myrep' if your repository is in a group.
374   374  
375 // $config->expandTabsBy(3, 'myrep'); // Expand Tabs by 3 for repository 'myrep' 375 // $config->expandTabsBy(3, 'myrep'); // Expand Tabs by 3 for repository 'myrep'
376   376  
377 // For installations without PHP5, a copy of PEAR's PHP Compat library is included. 377 // For installations without PHP5, a copy of PEAR's PHP Compat library is included.
378 // If you have your own version of Compat you wish to use, go ahead and specify here. 378 // If you have your own version of Compat you wish to use, go ahead and specify here.
379   379  
380 // $config->setPHPCompatPath('/usr/share/php/PHP/'); 380 // $config->setPHPCompatPath('/usr/share/php/PHP/');
381   381  
382 // }}} 382 // }}}
383 ?> 383 ?>