| Line 3... |
Line 3... |
| 3 |
use <sloupek.scad> |
3 |
use <sloupek.scad> |
| 4 |
use <plbase.scad> |
4 |
use <plbase.scad> |
| 5 |
include <manufactury_conf.scad> |
5 |
include <manufactury_conf.scad> |
| 6 |
include <../configuration.scad> |
6 |
include <../configuration.scad> |
| 7 |
|
7 |
|
| 8 |
bocnice(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |
8 |
bocnice(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje1,vzdalenost_od_okraje2,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice); |
| 9 |
|
9 |
|
| 10 |
//Bočnice |
10 |
//Bočnice |
| 11 |
//------------------------------------------------------------ |
11 |
//------------------------------------------------------------ |
| 12 |
|
12 |
|
| 13 |
|
13 |
|
| 14 |
module bocnice(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice){ |
14 |
module bocnice(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje1,vzdalenost_od_okraje2,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice){ |
| 15 |
|
15 |
|
| 16 |
difference () { |
16 |
difference () { |
| 17 |
union() |
17 |
union() |
| 18 |
{ |
18 |
{ |
| 19 |
translate([-((pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje)/2,-vzdalenost_od_okraje,vyska_bocnice/2]) |
19 |
translate([-((pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2)/2,-vzdalenost_od_okraje1,vyska_bocnice/2]) |
| 20 |
rotate(a=[180,0,90]) |
20 |
rotate(a=[180,0,90]) |
| 21 |
translate([radidus_hrany,radidus_hrany,0]) |
21 |
translate([radidus_hrany,radidus_hrany,0]) |
| 22 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
22 |
translate([-tloustka_bocnice,-tloustka_bocnice,0]) |
| 23 |
|
23 |
|
| 24 |
//obvod |
24 |
//obvod |
| 25 |
difference () { |
25 |
difference () { |
| 26 |
|
26 |
|
| 27 |
minkowski() |
27 |
minkowski() |
| 28 |
{ |
28 |
{ |
| 29 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje-2*radidus_hrany+2*tloustka_bocnice,vyska_bocnice+tloustka_plbase]); // base plastics brick |
29 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje1-2*radidus_hrany+2*tloustka_bocnice,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2-2*radidus_hrany+2*tloustka_bocnice,vyska_bocnice+tloustka_plbase]); // base plastics brick |
| 30 |
cylinder(r=radidus_hrany,h=0.01); |
30 |
cylinder(r=radidus_hrany,h=0.01); |
| 31 |
} |
31 |
} |
| 32 |
|
32 |
|
| 33 |
translate([tloustka_bocnice-radidus_hrany,tloustka_bocnice-radidus_hrany,-0.1]) |
33 |
translate([tloustka_bocnice-radidus_hrany,tloustka_bocnice-radidus_hrany,-0.1]) |
| 34 |
|
34 |
|
| 35 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje,vyska_bocnice+tloustka_plbase+0.2]); |
35 |
cube([(pocet_der1)*vzdalenost_der+2*vzdalenost_od_okraje1,(pocet_der2)*vzdalenost_der+2*vzdalenost_od_okraje2,vyska_bocnice+tloustka_plbase+0.2]); |
| 36 |
|
36 |
|
| 37 |
|
37 |
|
| 38 |
|
38 |
|
| 39 |
} |
39 |
} |
| 40 |
|
40 |
|
| Line 42... |
Line 42... |
| 42 |
|
42 |
|
| 43 |
//SLOUPKY |
43 |
//SLOUPKY |
| 44 |
//------------------------------------------------------------ |
44 |
//------------------------------------------------------------ |
| 45 |
//sloupek 1 |
45 |
//sloupek 1 |
| 46 |
|
46 |
|
| 47 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje+prumer_matice/2,-vzdalenost_od_okraje+prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
47 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje2+prumer_matice/2,-vzdalenost_od_okraje1+prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
| 48 |
sloupek (); |
48 |
sloupek (); |
| 49 |
|
49 |
|
| 50 |
//sloupek 2 |
50 |
//sloupek 2 |
| 51 |
|
51 |
|
| 52 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje-prumer_matice/2,-vzdalenost_od_okraje+prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
52 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje2-prumer_matice/2,-vzdalenost_od_okraje1+prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
| 53 |
rotate(a=[0,0,90]) |
53 |
rotate(a=[0,0,90]) |
| 54 |
sloupek (); |
54 |
sloupek (); |
| 55 |
|
55 |
|
| 56 |
//sloupek 3 |
56 |
//sloupek 3 |
| 57 |
|
57 |
|
| 58 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje-prumer_matice/2, (pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
58 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje2-prumer_matice/2, (pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
| 59 |
rotate(a=[0,0,180]) |
59 |
rotate(a=[0,0,180]) |
| 60 |
sloupek (); |
60 |
sloupek (); |
| 61 |
|
61 |
|
| 62 |
//sloupek 4 |
62 |
//sloupek 4 |
| 63 |
|
63 |
|
| 64 |
translate([-((pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje+prumer_matice/2, (pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
64 |
translate([-((pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje2+prumer_matice/2, (pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-prumer_matice/2,vyska_bocnice/2-(vyska_matice+2*tloustka_bocnice+0.1)-tloustka_plbase]) |
| 65 |
rotate(a=[0,0,270]) |
65 |
rotate(a=[0,0,270]) |
| 66 |
sloupek (); |
66 |
sloupek (); |
| 67 |
|
67 |
|
| 68 |
//uchyt 1 |
68 |
//uchyt 1 |
| 69 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje-Uchyt_radius/2-Uchyt_x+0.5,-vzdalenost_od_okraje+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
69 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje2-Uchyt_radius/2-Uchyt_x+0.5,-vzdalenost_od_okraje1+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 70 |
uchyt(); |
70 |
uchyt(); |
| 71 |
|
71 |
|
| 72 |
//uchyt 2 |
72 |
//uchyt 2 |
| 73 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5,-vzdalenost_od_okraje+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
73 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5,-vzdalenost_od_okraje1+vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 74 |
uchyt(); |
74 |
uchyt(); |
| 75 |
|
75 |
|
| 76 |
//uchyt 3 |
76 |
//uchyt 3 |
| 77 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje-Uchyt_radius/2-Uchyt_x+0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
77 |
translate([(-(pocet_der2)*vzdalenost_der)/2-vzdalenost_od_okraje2-Uchyt_radius/2-Uchyt_x+0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 78 |
uchyt(); |
78 |
uchyt(); |
| 79 |
|
79 |
|
| 80 |
//uchyt 4 |
80 |
//uchyt 4 |
| 81 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje+tloustka_bocnice+Uchyt_radius-0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
81 |
translate([((pocet_der2)*vzdalenost_der)/2+vzdalenost_od_okraje2+tloustka_bocnice+Uchyt_radius-0.5,(pocet_der1)*vzdalenost_der+vzdalenost_od_okraje1-Uchyt_y+Uchyt_radius-vzdalenost_der/2,-vyska_bocnice/2-tloustka_plbase]) |
| 82 |
uchyt(); |
82 |
uchyt(); |
| 83 |
|
83 |
|
| 84 |
} |
84 |
} |
| 85 |
|
85 |
|
| 86 |
//---------------------------------------------------- |
86 |
//---------------------------------------------------- |
| Line 97... |
Line 97... |
| 97 |
|
97 |
|
| 98 |
//plbase odecet na kryt |
98 |
//plbase odecet na kryt |
| 99 |
translate([0,0,vyska_bocnice/2-tloustka_plbase/2+0.05]) |
99 |
translate([0,0,vyska_bocnice/2-tloustka_plbase/2+0.05]) |
| 100 |
rotate(a=[0,0,0]) |
100 |
rotate(a=[0,0,0]) |
| 101 |
{ |
101 |
{ |
| 102 |
plbase_vrchni_kryt_pro_odecet(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,0,tloustka_plbase+0.1); |
102 |
plbase_vrchni_kryt_pro_odecet(pocet_der1,pocet_der2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje1,vzdalenost_od_okraje2,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,0,tloustka_plbase+0.1); |
| 103 |
} |
103 |
} |
| 104 |
|
104 |
|
| 105 |
|
105 |
|
| 106 |
} |
106 |
} |
| 107 |
} |
107 |
} |