| Line 1... |
Line 1... |
| 1 |
/**** IR Mrakomer 4 ****/ |
1 |
/**** IR Mrakomer 4 ****/ |
| 2 |
#define VERSION "4.0" |
2 |
#define VERSION "4.0" |
| 3 |
#define ID "$Id: irmrak4.c 1302 2009-01-17 09:03:34Z kakl $" |
3 |
#define ID "$Id: irmrak4.c 1303 2009-01-17 09:06:15Z kakl $" |
| 4 |
|
4 |
|
| 5 |
#include "irmrak4.h" |
5 |
#include "irmrak4.h" |
| 6 |
|
6 |
|
| 7 |
#bit CREN = 0x18.4 // USART registers |
7 |
#bit CREN = 0x18.4 // USART registers |
| 8 |
#bit SPEN = 0x18.7 |
8 |
#bit SPEN = 0x18.7 |
| Line 61... |
Line 61... |
| 61 |
printf("# s - Single measure mode on demand.\n\r"); |
61 |
printf("# s - Single measure mode on demand.\n\r"); |
| 62 |
printf("# u - Update firmware. Go to the Boot Loader.\n\r"); |
62 |
printf("# u - Update firmware. Go to the Boot Loader.\n\r"); |
| 63 |
printf("#\n\r"); |
63 |
printf("#\n\r"); |
| 64 |
printf("# <sequence> <ambient[1/100 C]> <sky[1/100 C]> "); |
64 |
printf("# <sequence> <ambient[1/100 C]> <sky[1/100 C]> "); |
| 65 |
printf("<heating[s]> <dome[s]> <check>\n\r\n\r"); |
65 |
printf("<heating[s]> <dome[s]> <check>\n\r\n\r"); |
| - |
|
66 |
//---WDT |
| - |
|
67 |
restart_wdt(); |
| 66 |
} |
68 |
} |
| 67 |
|
69 |
|
| 68 |
|
70 |
|
| 69 |
#include "smb.c" // System Management Bus driver |
71 |
#include "smb.c" // System Management Bus driver |
| 70 |
|
72 |
|
| Line 119... |
Line 121... |
| 119 |
heat=0; |
121 |
heat=0; |
| 120 |
open=0; |
122 |
open=0; |
| 121 |
repeat=TRUE; |
123 |
repeat=TRUE; |
| 122 |
|
124 |
|
| 123 |
welcome(); |
125 |
welcome(); |
| 124 |
//---WDT |
- |
|
| 125 |
restart_wdt(); |
- |
|
| 126 |
|
126 |
|
| 127 |
tempa=ReadTemp(SA, RAM_Tamb); // Dummy read |
127 |
tempa=ReadTemp(SA, RAM_Tamb); // Dummy read |
| 128 |
temp=ReadTemp(SA, RAM_Tobj1); |
128 |
temp=ReadTemp(SA, RAM_Tobj1); |
| 129 |
|
129 |
|
| 130 |
delay_ms(1000); |
130 |
delay_ms(1000); |