Rev 3332 Rev 3333
Line 36... Line 36...
36 */ 36 */
37 #else 37 #else
38 #define USB_CFG_IOPORTNAME B 38 #define USB_CFG_IOPORTNAME B
39 #define USB_CFG_DMINUS_BIT 0 39 #define USB_CFG_DMINUS_BIT 0
40 #define USB_CFG_DPLUS_BIT 2 40 #define USB_CFG_DPLUS_BIT 2
-   41  
-   42 /*#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
-   43 /* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
-   44 * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
-   45 * require no crystal, they tolerate +/- 1% deviation from the nominal
-   46 * frequency. All other rates require a precision of 2000 ppm and thus a
-   47 * crystal!
-   48 * Since F_CPU should be defined to your actual clock rate anyway, you should
-   49 * not need to modify this setting.
-   50 */
-   51 /*#define USB_CFG_CHECK_CRC 0
-   52 /* Define this to 1 if you want that the driver checks integrity of incoming
-   53 * data packets (CRC checks). CRC checks cost quite a bit of code size and are
-   54 * currently only available for 18 MHz crystal clock. You must choose
-   55 * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
-   56 */
-   57  
41 #endif 58 #endif
42   59  
43 /* --------------------------- Functional Range ---------------------------- */ 60 /* --------------------------- Functional Range ---------------------------- */
44   61  
45 #define USB_CFG_HAVE_INTRIN_ENDPOINT 0 62 #define USB_CFG_HAVE_INTRIN_ENDPOINT 0