WebSVN – MLAB – Rev 4530 and 3090 – Diff – /Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/lib

Rev 3090		Rev 4530
Line 1...		Line 1...
1	`/*++`	1	`/*++`
2		2
3	`Copyright (c) 2001-2011 Future Technology Devices International Limited`	3	`Copyright © 2001-2011 Future Technology Devices International Limited`
4		4
5	`THIS SOFTWARE IS PROVIDED BY FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED "AS IS"`	5	`THIS SOFTWARE IS PROVIDED BY FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED "AS IS"`
6	`AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES`	6	`AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES`
7	`OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL`	7	`OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL`
8	`FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,`	8	`FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,`
9	`SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT`	9	`SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT`
10	`OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE, DATA, OR PROFITS OR BUSINESS INTERRUPTION)`	10	`OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE, DATA, OR PROFITS OR BUSINESS INTERRUPTION)`
11	`HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR`	11	`HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR`
12	`TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,`	12	`TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,`
13	`EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.`	13	`EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.`
14		14
15	`FTDI DRIVERS MAY BE USED ONLY IN CONJUNCTION WITH PRODUCTS BASED ON FTDI PARTS.`	15	`FTDI DRIVERS MAY BE USED ONLY IN CONJUNCTION WITH PRODUCTS BASED ON FTDI PARTS.`
16		16
17	`FTDI DRIVERS MAY BE DISTRIBUTED IN ANY FORM AS LONG AS LICENSE INFORMATION IS NOT MODIFIED.`	17	`FTDI DRIVERS MAY BE DISTRIBUTED IN ANY FORM AS LONG AS LICENSE INFORMATION IS NOT MODIFIED.`
18		18
19	`IF A CUSTOM VENDOR ID AND/OR PRODUCT ID OR DESCRIPTION STRING ARE USED, IT IS THE`	19	`IF A CUSTOM VENDOR ID AND/OR PRODUCT ID OR DESCRIPTION STRING ARE USED, IT IS THE`
20	`RESPONSIBILITY OF THE PRODUCT MANUFACTURER TO MAINTAIN ANY CHANGES AND SUBSEQUENT WHQL`	20	`RESPONSIBILITY OF THE PRODUCT MANUFACTURER TO MAINTAIN ANY CHANGES AND SUBSEQUENT WHQL`
21	`RE-CERTIFICATION AS A RESULT OF MAKING THESE CHANGES.`	21	`RE-CERTIFICATION AS A RESULT OF MAKING THESE CHANGES.`
22		22
23		23
24	`Module Name:`	24	`Module Name:`
25		25
26	`ftd2xx.h`	26	`ftd2xx.h`
27		27
28	`Abstract:`	28	`Abstract:`
29		29
30	`Native USB device driver for FTDI FT232x, FT245x, FT2232x and FT4232x devices`	30	`Native USB device driver for FTDI FT232x, FT245x, FT2232x and FT4232x devices`
31	`FTD2XX library definitions`	31	`FTD2XX library definitions`
32		32
33	`Environment:`	33	`Environment:`
34		34
35	`user mode`	35	`kernel & user mode`
36		36
37		37
38	`--*/`	38	`--*/`
39		39
40		40
41	`#ifndef FTD2XX_H`	41	`#ifndef FTD2XX_H`
42	`#define FTD2XX_H`	42	`#define FTD2XX_H`
43		43
44	`#ifndef _WINDOWS`	44	`#ifdef _WIN32`
45	`#include <pthread.h>`	45	`// Compiling on Windows`
46	`#define WINAPI`	46	`#include <windows.h>`
47	`#endif`	47
48		48	`// The following ifdef block is the standard way of creating macros`
49	`// The following ifdef block is the standard way of creating macros`	49	`// which make exporting from a DLL simpler. All files within this DLL`
50	`// which make exporting from a DLL simpler. All files within this DLL`	50	`// are compiled with the FTD2XX_EXPORTS symbol defined on the command line.`
51	`// are compiled with the FTD2XX_EXPORTS symbol defined on the command line.`	51	`// This symbol should not be defined on any project that uses this DLL.`
52	`// This symbol should not be defined on any project that uses this DLL.`	52	`// This way any other project whose source files include this file see`
53	`// This way any other project whose source files include this file see`	53	`// FTD2XX_API functions as being imported from a DLL, whereas this DLL`
54	`// FTD2XX_API functions as being imported from a DLL, whereas this DLL`	54	`// sees symbols defined with this macro as being exported.`
55	`// sees symbols defined with this macro as being exported.`	55
56		56	`#ifdef FTD2XX_EXPORTS`
57	`#ifdef FTD2XX_EXPORTS`	57	`#define FTD2XX_API __declspec(dllexport)`
58	`#define FTD2XX_API __declspec(dllexport)`	58	`#elif defined(FTD2XX_STATIC)`
59	`#else`	59	`// Avoid decorations when linking statically to D2XX.`
60	`#define FTD2XX_API __declspec(dllimport)`	60	`#define FTD2XX_API`
61	`#endif`	61	`#else`
62		62	`#define FTD2XX_API __declspec(dllimport)`
63	`#ifndef _WINDOWS`	63	`#endif`
64	`#include "WinTypes.h"`	64
65		65	`#else // _WIN32`
66	`#ifdef FTD2XX_API`	66	`// Compiling on non-Windows platform.`
67	`#undef FTD2XX_API`	67	`#include "WinTypes.h"`
68	`#define FTD2XX_API`	68	`// No decorations needed.`
69	`#endif`	69	`#define FTD2XX_API`
70	`#endif`	70
71	`typedef struct _EVENT_HANDLE{`	71	`#endif // _WIN32`
72	`pthread_cond_t eCondVar;`	72
73	`pthread_mutex_t eMutex;`	73	`typedef PVOID FT_HANDLE;`
74	`int iVar;`	74	`typedef ULONG FT_STATUS;`
75	`} EVENT_HANDLE;`	75
76		76	`//`
77	`typedef PVOID FT_HANDLE;`	77	`// Device status`
78	`typedef ULONG FT_STATUS;`	78	`//`
79		79	`enum {`
80	`//`	80	`FT_OK,`
81	`// Device status`	81	`FT_INVALID_HANDLE,`
82	`//`	82	`FT_DEVICE_NOT_FOUND,`
83	`enum {`	83	`FT_DEVICE_NOT_OPENED,`
84	`FT_OK,`	84	`FT_IO_ERROR,`
85	`FT_INVALID_HANDLE,`	85	`FT_INSUFFICIENT_RESOURCES,`
86	`FT_DEVICE_NOT_FOUND,`	86	`FT_INVALID_PARAMETER,`
87	`FT_DEVICE_NOT_OPENED,`	87	`FT_INVALID_BAUD_RATE,`
88	`FT_IO_ERROR,`	88
89	`FT_INSUFFICIENT_RESOURCES,`	89	`FT_DEVICE_NOT_OPENED_FOR_ERASE,`
90	`FT_INVALID_PARAMETER,`	90	`FT_DEVICE_NOT_OPENED_FOR_WRITE,`
91	`FT_INVALID_BAUD_RATE, //7`	91	`FT_FAILED_TO_WRITE_DEVICE,`
92		92	`FT_EEPROM_READ_FAILED,`
93	`FT_DEVICE_NOT_OPENED_FOR_ERASE,`	93	`FT_EEPROM_WRITE_FAILED,`
94	`FT_DEVICE_NOT_OPENED_FOR_WRITE,`	94	`FT_EEPROM_ERASE_FAILED,`
95	`FT_FAILED_TO_WRITE_DEVICE,`	95	`FT_EEPROM_NOT_PRESENT,`
96	`FT_EEPROM_READ_FAILED,`	96	`FT_EEPROM_NOT_PROGRAMMED,`
97	`FT_EEPROM_WRITE_FAILED,`	97	`FT_INVALID_ARGS,`
98	`FT_EEPROM_ERASE_FAILED,`	98	`FT_NOT_SUPPORTED,`
99	`FT_EEPROM_NOT_PRESENT,`	99	`FT_OTHER_ERROR,`
100	`FT_EEPROM_NOT_PROGRAMMED,`	100	`FT_DEVICE_LIST_NOT_READY,`
101	`FT_INVALID_ARGS,`	101	`};`
102	`FT_NOT_SUPPORTED,`	102
103	`FT_OTHER_ERROR`	103
104	`};`	104	`#define FT_SUCCESS(status) ((status) == FT_OK)`
105		105
106		106	`//`
107	`#define FT_SUCCESS(status) ((status) == FT_OK)`	107	`// FT_OpenEx Flags`
108		108	`//`
109	`//`	109
110	`// FT_OpenEx Flags`	110	`#define FT_OPEN_BY_SERIAL_NUMBER 1`
111	`//`	111	`#define FT_OPEN_BY_DESCRIPTION 2`
112		112	`#define FT_OPEN_BY_LOCATION 4`
113	`#define FT_OPEN_BY_SERIAL_NUMBER 1`	113
114	`#define FT_OPEN_BY_DESCRIPTION 2`	114	`#define FT_OPEN_MASK (FT_OPEN_BY_SERIAL_NUMBER \| \`
115	`#define FT_OPEN_BY_LOCATION 4`	115	`FT_OPEN_BY_DESCRIPTION \| \`
116		116	`FT_OPEN_BY_LOCATION)`
117	`//`	117
118	`// FT_ListDevices Flags (used in conjunction with FT_OpenEx Flags`	118	`//`
119	`//`	119	`// FT_ListDevices Flags (used in conjunction with FT_OpenEx Flags`
120		120	`//`
121	`#define FT_LIST_NUMBER_ONLY 0x80000000`	121
122	`#define FT_LIST_BY_INDEX 0x40000000`	122	`#define FT_LIST_NUMBER_ONLY 0x80000000`
123	`#define FT_LIST_ALL 0x20000000`	123	`#define FT_LIST_BY_INDEX 0x40000000`
124		124	`#define FT_LIST_ALL 0x20000000`
125	`#define FT_LIST_MASK (FT_LIST_NUMBER_ONLY\|FT_LIST_BY_INDEX\|FT_LIST_ALL)`	125
126		126	`#define FT_LIST_MASK (FT_LIST_NUMBER_ONLY\|FT_LIST_BY_INDEX\|FT_LIST_ALL)`
127	`//`	127
128	`// Baud Rates`	128	`//`
129	`//`	129	`// Baud Rates`
130		130	`//`
131	`#define FT_BAUD_300 300`	131
132	`#define FT_BAUD_600 600`	132	`#define FT_BAUD_300 300`
133	`#define FT_BAUD_1200 1200`	133	`#define FT_BAUD_600 600`
134	`#define FT_BAUD_2400 2400`	134	`#define FT_BAUD_1200 1200`
135	`#define FT_BAUD_4800 4800`	135	`#define FT_BAUD_2400 2400`
136	`#define FT_BAUD_9600 9600`	136	`#define FT_BAUD_4800 4800`
137	`#define FT_BAUD_14400 14400`	137	`#define FT_BAUD_9600 9600`
138	`#define FT_BAUD_19200 19200`	138	`#define FT_BAUD_14400 14400`
139	`#define FT_BAUD_38400 38400`	139	`#define FT_BAUD_19200 19200`
140	`#define FT_BAUD_57600 57600`	140	`#define FT_BAUD_38400 38400`
141	`#define FT_BAUD_115200 115200`	141	`#define FT_BAUD_57600 57600`
142	`#define FT_BAUD_230400 230400`	142	`#define FT_BAUD_115200 115200`
143	`#define FT_BAUD_460800 460800`	143	`#define FT_BAUD_230400 230400`
144	`#define FT_BAUD_921600 921600`	144	`#define FT_BAUD_460800 460800`
145		145	`#define FT_BAUD_921600 921600`
146	`//`	146
147	`// Word Lengths`	147	`//`
148	`//`	148	`// Word Lengths`
149		149	`//`
150	`#define FT_BITS_8 (UCHAR) 8`	150
151	`#define FT_BITS_7 (UCHAR) 7`	151	`#define FT_BITS_8 (UCHAR) 8`
152		152	`#define FT_BITS_7 (UCHAR) 7`
153	`//`	153
154	`// Stop Bits`	154	`//`
155	`//`	155	`// Stop Bits`
156		156	`//`
157	`#define FT_STOP_BITS_1 (UCHAR) 0`	157
158	`#define FT_STOP_BITS_2 (UCHAR) 2`	158	`#define FT_STOP_BITS_1 (UCHAR) 0`
159		159	`#define FT_STOP_BITS_2 (UCHAR) 2`
160	`//`	160
161	`// Parity`	161	`//`
162	`//`	162	`// Parity`
163		163	`//`
164	`#define FT_PARITY_NONE (UCHAR) 0`	164
165	`#define FT_PARITY_ODD (UCHAR) 1`	165	`#define FT_PARITY_NONE (UCHAR) 0`
166	`#define FT_PARITY_EVEN (UCHAR) 2`	166	`#define FT_PARITY_ODD (UCHAR) 1`
167	`#define FT_PARITY_MARK (UCHAR) 3`	167	`#define FT_PARITY_EVEN (UCHAR) 2`
168	`#define FT_PARITY_SPACE (UCHAR) 4`	168	`#define FT_PARITY_MARK (UCHAR) 3`
169		169	`#define FT_PARITY_SPACE (UCHAR) 4`
170	`//`	170
171	`// Flow Control`	171	`//`
172	`//`	172	`// Flow Control`
173		173	`//`
174	`#define FT_FLOW_NONE 0x0000`	174
175	`#define FT_FLOW_RTS_CTS 0x0100`	175	`#define FT_FLOW_NONE 0x0000`
176	`#define FT_FLOW_DTR_DSR 0x0200`	176	`#define FT_FLOW_RTS_CTS 0x0100`
177	`#define FT_FLOW_XON_XOFF 0x0400`	177	`#define FT_FLOW_DTR_DSR 0x0200`
178		178	`#define FT_FLOW_XON_XOFF 0x0400`
179	`//`	179
180	`// Purge rx and tx buffers`	180	`//`
181	`//`	181	`// Purge rx and tx buffers`
182	`#define FT_PURGE_RX 1`	182	`//`
183	`#define FT_PURGE_TX 2`	183	`#define FT_PURGE_RX 1`
184		184	`#define FT_PURGE_TX 2`
185	`//`	185
186	`// Events`	186	`//`
187	`//`	187	`// Events`
188		188	`//`
189	`typedef void (*PFT_EVENT_HANDLER)(DWORD,DWORD);`	189
190		190	`typedef void (*PFT_EVENT_HANDLER)(DWORD,DWORD);`
191	`#define FT_EVENT_RXCHAR 1`	191
192	`#define FT_EVENT_MODEM_STATUS 2`	192	`#define FT_EVENT_RXCHAR 1`
193	`#define FT_EVENT_LINE_STATUS 4`	193	`#define FT_EVENT_MODEM_STATUS 2`
194		194	`#define FT_EVENT_LINE_STATUS 4`
195	`//`	195
196	`// Timeouts`	196	`//`
197	`//`	197	`// Timeouts`
198		198	`//`
199	`#define FT_DEFAULT_RX_TIMEOUT 300`	199
200	`#define FT_DEFAULT_TX_TIMEOUT 300`	200	`#define FT_DEFAULT_RX_TIMEOUT 300`
201		201	`#define FT_DEFAULT_TX_TIMEOUT 300`
202	`//`	202
203	`// Device types`	203	`//`
204	`//`	204	`// Device types`
205		205	`//`
206	`typedef ULONG FT_DEVICE;`	206
207		207	`typedef ULONG FT_DEVICE;`
208	`enum {`	208
209	`FT_DEVICE_BM,`	209	`enum {`
210	`FT_DEVICE_AM,`	210	`FT_DEVICE_BM,`
211	`FT_DEVICE_100AX,`	211	`FT_DEVICE_AM,`
212	`FT_DEVICE_UNKNOWN,`	212	`FT_DEVICE_100AX,`
213	`FT_DEVICE_2232C,`	213	`FT_DEVICE_UNKNOWN,`
214	`FT_DEVICE_232R,`	214	`FT_DEVICE_2232C,`
215	`FT_DEVICE_2232H,`	215	`FT_DEVICE_232R,`
216	`FT_DEVICE_4232H,`	216	`FT_DEVICE_2232H,`
217	`FT_DEVICE_232H`	217	`FT_DEVICE_4232H,`
218	`};`	218	`FT_DEVICE_232H,`
219		219	`FT_DEVICE_X_SERIES,`
220	`//`	220	`FT_DEVICE_4222H_0,`
221	`// Bit Modes`	221	`FT_DEVICE_4222H_1_2,`
222	`//`	222	`FT_DEVICE_4222H_3,`
223		223	`FT_DEVICE_4222_PROG,`
224	`#define FT_BITMODE_RESET 0x00`	224	`};`
225	`#define FT_BITMODE_ASYNC_BITBANG 0x01`	225
226	`#define FT_BITMODE_MPSSE 0x02`	226	`//`
227	`#define FT_BITMODE_SYNC_BITBANG 0x04`	227	`// Bit Modes`
228	`#define FT_BITMODE_MCU_HOST 0x08`	228	`//`
229	`#define FT_BITMODE_FAST_SERIAL 0x10`	229
230	`#define FT_BITMODE_CBUS_BITBANG 0x20`	230	`#define FT_BITMODE_RESET 0x00`
231	`#define FT_BITMODE_SYNC_FIFO 0x40`	231	`#define FT_BITMODE_ASYNC_BITBANG 0x01`
232		232	`#define FT_BITMODE_MPSSE 0x02`
233		233	`#define FT_BITMODE_SYNC_BITBANG 0x04`
234	`//`	234	`#define FT_BITMODE_MCU_HOST 0x08`
235	`// FT232R CBUS Options EEPROM values`	235	`#define FT_BITMODE_FAST_SERIAL 0x10`
236	`//`	236	`#define FT_BITMODE_CBUS_BITBANG 0x20`
237		237	`#define FT_BITMODE_SYNC_FIFO 0x40`
238	`#define FT_232R_CBUS_TXDEN 0x00 // Tx Data Enable`	238
239	`#define FT_232R_CBUS_PWRON 0x01 // Power On`	239	`//`
240	`#define FT_232R_CBUS_RXLED 0x02 // Rx LED`	240	`// FT232R CBUS Options EEPROM values`
241	`#define FT_232R_CBUS_TXLED 0x03 // Tx LED`	241	`//`
242	`#define FT_232R_CBUS_TXRXLED 0x04 // Tx and Rx LED`	242
243	`#define FT_232R_CBUS_SLEEP 0x05 // Sleep`	243	`#define FT_232R_CBUS_TXDEN 0x00 // Tx Data Enable`
244	`#define FT_232R_CBUS_CLK48 0x06 // 48MHz clock`	244	`#define FT_232R_CBUS_PWRON 0x01 // Power On`
245	`#define FT_232R_CBUS_CLK24 0x07 // 24MHz clock`	245	`#define FT_232R_CBUS_RXLED 0x02 // Rx LED`
246	`#define FT_232R_CBUS_CLK12 0x08 // 12MHz clock`	246	`#define FT_232R_CBUS_TXLED 0x03 // Tx LED`
247	`#define FT_232R_CBUS_CLK6 0x09 // 6MHz clock`	247	`#define FT_232R_CBUS_TXRXLED 0x04 // Tx and Rx LED`
248	`#define FT_232R_CBUS_IOMODE 0x0A // IO Mode for CBUS bit-bang`	248	`#define FT_232R_CBUS_SLEEP 0x05 // Sleep`
249	`#define FT_232R_CBUS_BITBANG_WR 0x0B // Bit-bang write strobe`	249	`#define FT_232R_CBUS_CLK48 0x06 // 48MHz clock`
250	`#define FT_232R_CBUS_BITBANG_RD 0x0C // Bit-bang read strobe`	250	`#define FT_232R_CBUS_CLK24 0x07 // 24MHz clock`
251		251	`#define FT_232R_CBUS_CLK12 0x08 // 12MHz clock`
252	`//`	252	`#define FT_232R_CBUS_CLK6 0x09 // 6MHz clock`
253	`// FT232H CBUS Options EEPROM values`	253	`#define FT_232R_CBUS_IOMODE 0x0A // IO Mode for CBUS bit-bang`
254	`//`	254	`#define FT_232R_CBUS_BITBANG_WR 0x0B // Bit-bang write strobe`
255		255	`#define FT_232R_CBUS_BITBANG_RD 0x0C // Bit-bang read strobe`
256	`#define FT_232H_CBUS_TRISTATE 0x00 // Tristate`	256
257	`#define FT_232H_CBUS_TXLED 0x01 // Tx LED`	257	`//`
258	`#define FT_232H_CBUS_RXLED 0x02 // Rx LED`	258	`// FT232H CBUS Options EEPROM values`
259	`#define FT_232H_CBUS_TXRXLED 0x03 // Tx and Rx LED`	259	`//`
260	`#define FT_232H_CBUS_PWREN 0x04 // Power Enable`	260
261	`#define FT_232H_CBUS_SLEEP 0x05 // Sleep`	261	`#define FT_232H_CBUS_TRISTATE 0x00 // Tristate`
262	`#define FT_232H_CBUS_DRIVE_0 0x06 // Drive pin to logic 0`	262	`#define FT_232H_CBUS_TXLED 0x01 // Tx LED`
263	`#define FT_232H_CBUS_DRIVE_1 0x07 // Drive pin to logic 1`	263	`#define FT_232H_CBUS_RXLED 0x02 // Rx LED`
264	`#define FT_232H_CBUS_IOMODE 0x08 // IO Mode for CBUS bit-bang`	264	`#define FT_232H_CBUS_TXRXLED 0x03 // Tx and Rx LED`
265	`#define FT_232H_CBUS_TXDEN 0x09 // Tx Data Enable`	265	`#define FT_232H_CBUS_PWREN 0x04 // Power Enable`
266	`#define FT_232H_CBUS_CLK30 0x0A // 30MHz clock`	266	`#define FT_232H_CBUS_SLEEP 0x05 // Sleep`
267	`#define FT_232H_CBUS_CLK15 0x0B // 15MHz clock`	267	`#define FT_232H_CBUS_DRIVE_0 0x06 // Drive pin to logic 0`
268	`#define FT_232H_CBUS_CLK7_5 0x0C // 7.5MHz clock`	268	`#define FT_232H_CBUS_DRIVE_1 0x07 // Drive pin to logic 1`
269		269	`#define FT_232H_CBUS_IOMODE 0x08 // IO Mode for CBUS bit-bang`
270		270	`#define FT_232H_CBUS_TXDEN 0x09 // Tx Data Enable`
271	`#ifdef __cplusplus`	271	`#define FT_232H_CBUS_CLK30 0x0A // 30MHz clock`
272	`extern "C" {`	272	`#define FT_232H_CBUS_CLK15 0x0B // 15MHz clock`
273	`#endif`	273	`#define FT_232H_CBUS_CLK7_5 0x0C // 7.5MHz clock`
274		274
275	`FTD2XX_API`	275	`//`
276	`FT_STATUS WINAPI FT_Open(`	276	`// FT X Series CBUS Options EEPROM values`
277	`int deviceNumber,`	277	`//`
278	`FT_HANDLE *pHandle`	278
279	`);`	279	`#define FT_X_SERIES_CBUS_TRISTATE 0x00 // Tristate`
280		280	`#define FT_X_SERIES_CBUS_TXLED 0x01 // Tx LED`
281	`FTD2XX_API`	281	`#define FT_X_SERIES_CBUS_RXLED 0x02 // Rx LED`
282	`FT_STATUS WINAPI FT_OpenEx(`	282	`#define FT_X_SERIES_CBUS_TXRXLED 0x03 // Tx and Rx LED`
283	`PVOID pArg1,`	283	`#define FT_X_SERIES_CBUS_PWREN 0x04 // Power Enable`
284	`DWORD Flags,`	284	`#define FT_X_SERIES_CBUS_SLEEP 0x05 // Sleep`
285	`FT_HANDLE *pHandle`	285	`#define FT_X_SERIES_CBUS_DRIVE_0 0x06 // Drive pin to logic 0`
286	`);`	286	`#define FT_X_SERIES_CBUS_DRIVE_1 0x07 // Drive pin to logic 1`
287		287	`#define FT_X_SERIES_CBUS_IOMODE 0x08 // IO Mode for CBUS bit-bang`
288	`FTD2XX_API`	288	`#define FT_X_SERIES_CBUS_TXDEN 0x09 // Tx Data Enable`
289	`FT_STATUS WINAPI FT_ListDevices(`	289	`#define FT_X_SERIES_CBUS_CLK24 0x0A // 24MHz clock`
290	`PVOID pArg1,`	290	`#define FT_X_SERIES_CBUS_CLK12 0x0B // 12MHz clock`
291	`PVOID pArg2,`	291	`#define FT_X_SERIES_CBUS_CLK6 0x0C // 6MHz clock`
292	`DWORD Flags`	292	`#define FT_X_SERIES_CBUS_BCD_CHARGER 0x0D // Battery charger detected`
293	`);`	293	`#define FT_X_SERIES_CBUS_BCD_CHARGER_N 0x0E // Battery charger detected inverted`
294		294	`#define FT_X_SERIES_CBUS_I2C_TXE 0x0F // I2C Tx empty`
295	`FTD2XX_API`	295	`#define FT_X_SERIES_CBUS_I2C_RXF 0x10 // I2C Rx full`
296	`FT_STATUS FT_SetVIDPID(`	296	`#define FT_X_SERIES_CBUS_VBUS_SENSE 0x11 // Detect VBUS`
297	`DWORD dwVID,`	297	`#define FT_X_SERIES_CBUS_BITBANG_WR 0x12 // Bit-bang write strobe`
298	`DWORD dwPID`	298	`#define FT_X_SERIES_CBUS_BITBANG_RD 0x13 // Bit-bang read strobe`
299	`);`	299	`#define FT_X_SERIES_CBUS_TIMESTAMP 0x14 // Toggle output when a USB SOF token is received`
300		300	`#define FT_X_SERIES_CBUS_KEEP_AWAKE 0x15 //`
301	`FTD2XX_API`	301
302	`FT_STATUS FT_GetVIDPID(`	302
303	`DWORD * pdwVID,`	303	`// Driver types`
304	`DWORD * pdwPID`	304	`#define FT_DRIVER_TYPE_D2XX 0`
305	`);`	305	`#define FT_DRIVER_TYPE_VCP 1`
306		306
307	`FTD2XX_API`	307
308	`FT_STATUS WINAPI FT_Close(`	308
309	`FT_HANDLE ftHandle`	309	`#ifdef __cplusplus`
310	`);`	310	`extern "C" {`
311		311	`#endif`
312	`FTD2XX_API`	312
313	`FT_STATUS WINAPI FT_Read(`	313
314	`FT_HANDLE ftHandle,`	314	`FTD2XX_API`
315	`LPVOID lpBuffer,`	315	`FT_STATUS WINAPI FT_Open(`
316	`DWORD nBufferSize,`	316	`int deviceNumber,`
317	`LPDWORD lpBytesReturned`	317	`FT_HANDLE *pHandle`
318	`);`	318	`);`
319		319
320	`FTD2XX_API`	320	`FTD2XX_API`
321	`FT_STATUS WINAPI FT_Write(`	321	`FT_STATUS WINAPI FT_OpenEx(`
322	`FT_HANDLE ftHandle,`	322	`PVOID pArg1,`
323	`LPVOID lpBuffer,`	323	`DWORD Flags,`
324	`DWORD nBufferSize,`	324	`FT_HANDLE *pHandle`
325	`LPDWORD lpBytesWritten`	325	`);`
326	`);`	326
327		327	`FTD2XX_API`
328	`FTD2XX_API`	328	`FT_STATUS WINAPI FT_ListDevices(`
329	`FT_STATUS WINAPI FT_IoCtl(`	329	`PVOID pArg1,`
330	`FT_HANDLE ftHandle,`	330	`PVOID pArg2,`
331	`DWORD dwIoControlCode,`	331	`DWORD Flags`
332	`LPVOID lpInBuf,`	332	`);`
333	`DWORD nInBufSize,`	333
334	`LPVOID lpOutBuf,`	334	`FTD2XX_API`
335	`DWORD nOutBufSize,`	335	`FT_STATUS WINAPI FT_Close(`
336	`LPDWORD lpBytesReturned,`	336	`FT_HANDLE ftHandle`
337	`LPOVERLAPPED lpOverlapped`	337	`);`
338	`);`	338
339		339	`FTD2XX_API`
340	`FTD2XX_API`	340	`FT_STATUS WINAPI FT_Read(`
341	`FT_STATUS WINAPI FT_SetBaudRate(`	341	`FT_HANDLE ftHandle,`
342	`FT_HANDLE ftHandle,`	342	`LPVOID lpBuffer,`
343	`ULONG BaudRate`	343	`DWORD dwBytesToRead,`
344	`);`	344	`LPDWORD lpBytesReturned`
345		345	`);`
346	`FTD2XX_API`	346
347	`FT_STATUS WINAPI FT_SetDivisor(`	347	`FTD2XX_API`
348	`FT_HANDLE ftHandle,`	348	`FT_STATUS WINAPI FT_Write(`
349	`USHORT Divisor`	349	`FT_HANDLE ftHandle,`
350	`);`	350	`LPVOID lpBuffer,`
351		351	`DWORD dwBytesToWrite,`
352	`FTD2XX_API`	352	`LPDWORD lpBytesWritten`
353	`FT_STATUS WINAPI FT_SetDataCharacteristics(`	353	`);`
354	`FT_HANDLE ftHandle,`	354
355	`UCHAR WordLength,`	355	`FTD2XX_API`
356	`UCHAR StopBits,`	356	`FT_STATUS WINAPI FT_IoCtl(`
357	`UCHAR Parity`	357	`FT_HANDLE ftHandle,`
358	`);`	358	`DWORD dwIoControlCode,`
359		359	`LPVOID lpInBuf,`
360	`FTD2XX_API`	360	`DWORD nInBufSize,`
361	`FT_STATUS WINAPI FT_SetFlowControl(`	361	`LPVOID lpOutBuf,`
362	`FT_HANDLE ftHandle,`	362	`DWORD nOutBufSize,`
363	`USHORT FlowControl,`	363	`LPDWORD lpBytesReturned,`
364	`UCHAR XonChar,`	364	`LPOVERLAPPED lpOverlapped`
365	`UCHAR XoffChar`	365	`);`
366	`);`	366
367		367	`FTD2XX_API`
368	`FTD2XX_API`	368	`FT_STATUS WINAPI FT_SetBaudRate(`
369	`FT_STATUS WINAPI FT_ResetDevice(`	369	`FT_HANDLE ftHandle,`
370	`FT_HANDLE ftHandle`	370	`ULONG BaudRate`
371	`);`	371	`);`
372		372
373	`FTD2XX_API`	373	`FTD2XX_API`
374	`FT_STATUS WINAPI FT_SetDtr(`	374	`FT_STATUS WINAPI FT_SetDivisor(`
375	`FT_HANDLE ftHandle`	375	`FT_HANDLE ftHandle,`
376	`);`	376	`USHORT Divisor`
377		377	`);`
378	`FTD2XX_API`	378
379	`FT_STATUS WINAPI FT_ClrDtr(`	379	`FTD2XX_API`
380	`FT_HANDLE ftHandle`	380	`FT_STATUS WINAPI FT_SetDataCharacteristics(`
381	`);`	381	`FT_HANDLE ftHandle,`
382		382	`UCHAR WordLength,`
383	`FTD2XX_API`	383	`UCHAR StopBits,`
384	`FT_STATUS WINAPI FT_SetRts(`	384	`UCHAR Parity`
385	`FT_HANDLE ftHandle`	385	`);`
386	`);`	386
387		387	`FTD2XX_API`
388	`FTD2XX_API`	388	`FT_STATUS WINAPI FT_SetFlowControl(`
389	`FT_STATUS WINAPI FT_ClrRts(`	389	`FT_HANDLE ftHandle,`
390	`FT_HANDLE ftHandle`	390	`USHORT FlowControl,`
391	`);`	391	`UCHAR XonChar,`
392		392	`UCHAR XoffChar`
393	`FTD2XX_API`	393	`);`
394	`FT_STATUS WINAPI FT_GetModemStatus(`	394
395	`FT_HANDLE ftHandle,`	395	`FTD2XX_API`
396	`ULONG *pModemStatus`	396	`FT_STATUS WINAPI FT_ResetDevice(`
397	`);`	397	`FT_HANDLE ftHandle`
398		398	`);`
399	`FTD2XX_API`	399
400	`FT_STATUS WINAPI FT_SetChars(`	400	`FTD2XX_API`
401	`FT_HANDLE ftHandle,`	401	`FT_STATUS WINAPI FT_SetDtr(`
402	`UCHAR EventChar,`	402	`FT_HANDLE ftHandle`
403	`UCHAR EventCharEnabled,`	403	`);`
404	`UCHAR ErrorChar,`	404
405	`UCHAR ErrorCharEnabled`	405	`FTD2XX_API`
406	`);`	406	`FT_STATUS WINAPI FT_ClrDtr(`
407		407	`FT_HANDLE ftHandle`
408	`FTD2XX_API`	408	`);`
409	`FT_STATUS WINAPI FT_Purge(`	409
410	`FT_HANDLE ftHandle,`	410	`FTD2XX_API`
411	`ULONG Mask`	411	`FT_STATUS WINAPI FT_SetRts(`
412	`);`	412	`FT_HANDLE ftHandle`
413		413	`);`
414	`FTD2XX_API`	414
415	`FT_STATUS WINAPI FT_SetTimeouts(`	415	`FTD2XX_API`
416	`FT_HANDLE ftHandle,`	416	`FT_STATUS WINAPI FT_ClrRts(`
417	`ULONG ReadTimeout,`	417	`FT_HANDLE ftHandle`
418	`ULONG WriteTimeout`	418	`);`
419	`);`	419
420		420	`FTD2XX_API`
421	`FTD2XX_API`	421	`FT_STATUS WINAPI FT_GetModemStatus(`
422	`FT_STATUS WINAPI FT_GetQueueStatus(`	422	`FT_HANDLE ftHandle,`
423	`FT_HANDLE ftHandle,`	423	`ULONG *pModemStatus`
424	`DWORD *dwRxBytes`	424	`);`
425	`);`	425
426		426	`FTD2XX_API`
427	`FTD2XX_API`	427	`FT_STATUS WINAPI FT_SetChars(`
428	`FT_STATUS WINAPI FT_GetQueueStatusEx(`	428	`FT_HANDLE ftHandle,`
429	`FT_HANDLE ftHandle,`	429	`UCHAR EventChar,`
430	`DWORD *dwRxBytes`	430	`UCHAR EventCharEnabled,`
431	`);`	431	`UCHAR ErrorChar,`
432		432	`UCHAR ErrorCharEnabled`
433	`FTD2XX_API`	433	`);`
434	`FT_STATUS WINAPI FT_SetEventNotification(`	434
435	`FT_HANDLE ftHandle,`	435	`FTD2XX_API`
436	`DWORD Mask,`	436	`FT_STATUS WINAPI FT_Purge(`
437	`PVOID Param`	437	`FT_HANDLE ftHandle,`
438	`);`	438	`ULONG Mask`
439		439	`);`
440	`FTD2XX_API`	440
441	`FT_STATUS WINAPI FT_GetStatus(`	441	`FTD2XX_API`
442	`FT_HANDLE ftHandle,`	442	`FT_STATUS WINAPI FT_SetTimeouts(`
443	`DWORD *dwRxBytes,`	443	`FT_HANDLE ftHandle,`
444	`DWORD *dwTxBytes,`	444	`ULONG ReadTimeout,`
445	`DWORD *dwEventDWord`	445	`ULONG WriteTimeout`
446	`);`	446	`);`
447		447
448	`FTD2XX_API`	448	`FTD2XX_API`
449	`FT_STATUS WINAPI FT_SetBreakOn(`	449	`FT_STATUS WINAPI FT_GetQueueStatus(`
450	`FT_HANDLE ftHandle`	450	`FT_HANDLE ftHandle,`
451	`);`	451	`DWORD *dwRxBytes`
452		452	`);`
453	`FTD2XX_API`	453
454	`FT_STATUS WINAPI FT_SetBreakOff(`	454	`FTD2XX_API`
455	`FT_HANDLE ftHandle`	455	`FT_STATUS WINAPI FT_SetEventNotification(`
456	`);`	456	`FT_HANDLE ftHandle,`
457		457	`DWORD Mask,`
458	`FTD2XX_API`	458	`PVOID Param`
459	`FT_STATUS WINAPI FT_SetWaitMask(`	459	`);`
460	`FT_HANDLE ftHandle,`	460
461	`DWORD Mask`	461	`FTD2XX_API`
462	`);`	462	`FT_STATUS WINAPI FT_GetStatus(`
463		463	`FT_HANDLE ftHandle,`
464	`FTD2XX_API`	464	`DWORD *dwRxBytes,`
465	`FT_STATUS WINAPI FT_WaitOnMask(`	465	`DWORD *dwTxBytes,`
466	`FT_HANDLE ftHandle,`	466	`DWORD *dwEventDWord`
467	`DWORD *Mask`	467	`);`
468	`);`	468
469		469	`FTD2XX_API`
470	`FTD2XX_API`	470	`FT_STATUS WINAPI FT_SetBreakOn(`
471	`FT_STATUS WINAPI FT_GetEventStatus(`	471	`FT_HANDLE ftHandle`
472	`FT_HANDLE ftHandle,`	472	`);`
473	`DWORD *dwEventDWord`	473
474	`);`	474	`FTD2XX_API`
475		475	`FT_STATUS WINAPI FT_SetBreakOff(`
476	`FTD2XX_API`	476	`FT_HANDLE ftHandle`
477	`FT_STATUS WINAPI FT_ReadEE(`	477	`);`
478	`FT_HANDLE ftHandle,`	478
479	`DWORD dwWordOffset,`	479	`FTD2XX_API`
480	`LPWORD lpwValue`	480	`FT_STATUS WINAPI FT_SetWaitMask(`
481	`);`	481	`FT_HANDLE ftHandle,`
482		482	`DWORD Mask`
483	`FTD2XX_API`	483	`);`
484	`FT_STATUS WINAPI FT_WriteEE(`	484
485	`FT_HANDLE ftHandle,`	485	`FTD2XX_API`
486	`DWORD dwWordOffset,`	486	`FT_STATUS WINAPI FT_WaitOnMask(`
487	`WORD wValue`	487	`FT_HANDLE ftHandle,`
488	`);`	488	`DWORD *Mask`
489		489	`);`
490	`FTD2XX_API`	490
491	`FT_STATUS WINAPI FT_EraseEE(`	491	`FTD2XX_API`
492	`FT_HANDLE ftHandle`	492	`FT_STATUS WINAPI FT_GetEventStatus(`
493	`);`	493	`FT_HANDLE ftHandle,`
494		494	`DWORD *dwEventDWord`
495	`//`	495	`);`
496	`// structure to hold program data for FT_Program function`	496
497	`//`	497	`FTD2XX_API`
498	`typedef struct ft_program_data {`	498	`FT_STATUS WINAPI FT_ReadEE(`
499		499	`FT_HANDLE ftHandle,`
500	`DWORD Signature1; // Header - must be 0x00000000`	500	`DWORD dwWordOffset,`
501	`DWORD Signature2; // Header - must be 0xffffffff`	501	`LPWORD lpwValue`
502	`DWORD Version; // Header - FT_PROGRAM_DATA version`	502	`);`
503	`// 0 = original`	503
504	`// 1 = FT2232C extensions`	504	`FTD2XX_API`
505	`// 2 = FT232R extensions`	505	`FT_STATUS WINAPI FT_WriteEE(`
506	`// 3 = FT2232H extensions`	506	`FT_HANDLE ftHandle,`
507	`// 4 = FT4232H extensions`	507	`DWORD dwWordOffset,`
508	`// 5 = FT232H extensions`	508	`WORD wValue`
509	`WORD VendorId; // 0x0403`	509	`);`
510	`WORD ProductId; // 0x6001`	510
511	`char *Manufacturer; // "FTDI"`	511	`FTD2XX_API`
512	`char *ManufacturerId; // "FT"`	512	`FT_STATUS WINAPI FT_EraseEE(`
513	`char *Description; // "USB HS Serial Converter"`	513	`FT_HANDLE ftHandle`
514	`char *SerialNumber; // "FT000001" if fixed, or NULL`	514	`);`
515	`WORD MaxPower; // 0 < MaxPower <= 500`	515
516	`WORD PnP; // 0 = disabled, 1 = enabled`	516	`//`
517	`WORD SelfPowered; // 0 = bus powered, 1 = self powered`	517	`// structure to hold program data for FT_EE_Program, FT_EE_ProgramEx, FT_EE_Read`
518	`WORD RemoteWakeup; // 0 = not capable, 1 = capable`	518	`// and FT_EE_ReadEx functions`
519	`//`	519	`//`
520	`// Rev4 (FT232B) extensions`	520	`typedef struct ft_program_data {`
521	`//`	521
522	`UCHAR Rev4; // non-zero if Rev4 chip, zero otherwise`	522	`DWORD Signature1; // Header - must be 0x00000000`
523	`UCHAR IsoIn; // non-zero if in endpoint is isochronous`	523	`DWORD Signature2; // Header - must be 0xffffffff`
524	`UCHAR IsoOut; // non-zero if out endpoint is isochronous`	524	`DWORD Version; // Header - FT_PROGRAM_DATA version`
525	`UCHAR PullDownEnable; // non-zero if pull down enabled`	525	`// 0 = original`
526	`UCHAR SerNumEnable; // non-zero if serial number to be used`	526	`// 1 = FT2232 extensions`
527	`UCHAR USBVersionEnable; // non-zero if chip uses USBVersion`	527	`// 2 = FT232R extensions`
528	`WORD USBVersion; // BCD (0x0200 => USB2)`	528	`// 3 = FT2232H extensions`
529	`//`	529	`// 4 = FT4232H extensions`
530	`// Rev 5 (FT2232) extensions`	530	`// 5 = FT232H extensions`
531	`//`	531
532	`UCHAR Rev5; // non-zero if Rev5 chip, zero otherwise`	532	`WORD VendorId; // 0x0403`
533	`UCHAR IsoInA; // non-zero if in endpoint is isochronous`	533	`WORD ProductId; // 0x6001`
534	`UCHAR IsoInB; // non-zero if in endpoint is isochronous`	534	`char *Manufacturer; // "FTDI"`
535	`UCHAR IsoOutA; // non-zero if out endpoint is isochronous`	535	`char *ManufacturerId; // "FT"`
536	`UCHAR IsoOutB; // non-zero if out endpoint is isochronous`	536	`char *Description; // "USB HS Serial Converter"`
537	`UCHAR PullDownEnable5; // non-zero if pull down enabled`	537	`char *SerialNumber; // "FT000001" if fixed, or NULL`
538	`UCHAR SerNumEnable5; // non-zero if serial number to be used`	538	`WORD MaxPower; // 0 < MaxPower <= 500`
539	`UCHAR USBVersionEnable5; // non-zero if chip uses USBVersion`	539	`WORD PnP; // 0 = disabled, 1 = enabled`
540	`WORD USBVersion5; // BCD (0x0200 => USB2)`	540	`WORD SelfPowered; // 0 = bus powered, 1 = self powered`
541	`UCHAR AIsHighCurrent; // non-zero if interface is high current`	541	`WORD RemoteWakeup; // 0 = not capable, 1 = capable`
542	`UCHAR BIsHighCurrent; // non-zero if interface is high current`	542	`//`
543	`UCHAR IFAIsFifo; // non-zero if interface is 245 FIFO`	543	`// Rev4 (FT232B) extensions`
544	`UCHAR IFAIsFifoTar; // non-zero if interface is 245 FIFO CPU target`	544	`//`
545	`UCHAR IFAIsFastSer; // non-zero if interface is Fast serial`	545	`UCHAR Rev4; // non-zero if Rev4 chip, zero otherwise`
546	`UCHAR AIsVCP; // non-zero if interface is to use VCP drivers`	546	`UCHAR IsoIn; // non-zero if in endpoint is isochronous`
547	`UCHAR IFBIsFifo; // non-zero if interface is 245 FIFO`	547	`UCHAR IsoOut; // non-zero if out endpoint is isochronous`
548	`UCHAR IFBIsFifoTar; // non-zero if interface is 245 FIFO CPU target`	548	`UCHAR PullDownEnable; // non-zero if pull down enabled`
549	`UCHAR IFBIsFastSer; // non-zero if interface is Fast serial`	549	`UCHAR SerNumEnable; // non-zero if serial number to be used`
550	`UCHAR BIsVCP; // non-zero if interface is to use VCP drivers`	550	`UCHAR USBVersionEnable; // non-zero if chip uses USBVersion`
551	`//`	551	`WORD USBVersion; // BCD (0x0200 => USB2)`
552	`// Rev 6 (FT232R) extensions`	552	`//`
553	`//`	553	`// Rev 5 (FT2232) extensions`
554	`UCHAR UseExtOsc; // Use External Oscillator`	554	`//`
555	`UCHAR HighDriveIOs; // High Drive I/Os`	555	`UCHAR Rev5; // non-zero if Rev5 chip, zero otherwise`
556	`UCHAR EndpointSize; // Endpoint size`	556	`UCHAR IsoInA; // non-zero if in endpoint is isochronous`
557	`UCHAR PullDownEnableR; // non-zero if pull down enabled`	557	`UCHAR IsoInB; // non-zero if in endpoint is isochronous`
558	`UCHAR SerNumEnableR; // non-zero if serial number to be used`	558	`UCHAR IsoOutA; // non-zero if out endpoint is isochronous`
559	`UCHAR InvertTXD; // non-zero if invert TXD`	559	`UCHAR IsoOutB; // non-zero if out endpoint is isochronous`
560	`UCHAR InvertRXD; // non-zero if invert RXD`	560	`UCHAR PullDownEnable5; // non-zero if pull down enabled`
561	`UCHAR InvertRTS; // non-zero if invert RTS`	561	`UCHAR SerNumEnable5; // non-zero if serial number to be used`
562	`UCHAR InvertCTS; // non-zero if invert CTS`	562	`UCHAR USBVersionEnable5; // non-zero if chip uses USBVersion`
563	`UCHAR InvertDTR; // non-zero if invert DTR`	563	`WORD USBVersion5; // BCD (0x0200 => USB2)`
564	`UCHAR InvertDSR; // non-zero if invert DSR`	564	`UCHAR AIsHighCurrent; // non-zero if interface is high current`
565	`UCHAR InvertDCD; // non-zero if invert DCD`	565	`UCHAR BIsHighCurrent; // non-zero if interface is high current`
566	`UCHAR InvertRI; // non-zero if invert RI`	566	`UCHAR IFAIsFifo; // non-zero if interface is 245 FIFO`
567	`UCHAR Cbus0; // Cbus Mux control`	567	`UCHAR IFAIsFifoTar; // non-zero if interface is 245 FIFO CPU target`
568	`UCHAR Cbus1; // Cbus Mux control`	568	`UCHAR IFAIsFastSer; // non-zero if interface is Fast serial`
569	`UCHAR Cbus2; // Cbus Mux control`	569	`UCHAR AIsVCP; // non-zero if interface is to use VCP drivers`
570	`UCHAR Cbus3; // Cbus Mux control`	570	`UCHAR IFBIsFifo; // non-zero if interface is 245 FIFO`
571	`UCHAR Cbus4; // Cbus Mux control`	571	`UCHAR IFBIsFifoTar; // non-zero if interface is 245 FIFO CPU target`
572	`UCHAR RIsD2XX; // non-zero if using D2XX drivers`	572	`UCHAR IFBIsFastSer; // non-zero if interface is Fast serial`
573	`//`	573	`UCHAR BIsVCP; // non-zero if interface is to use VCP drivers`
574	`// Rev 7 (FT2232H) Extensions`	574	`//`
575	`//`	575	`// Rev 6 (FT232R) extensions`
576	`UCHAR PullDownEnable7; // non-zero if pull down enabled`	576	`//`
577	`UCHAR SerNumEnable7; // non-zero if serial number to be used`	577	`UCHAR UseExtOsc; // Use External Oscillator`
578	`UCHAR ALSlowSlew; // non-zero if AL pins have slow slew`	578	`UCHAR HighDriveIOs; // High Drive I/Os`
579	`UCHAR ALSchmittInput; // non-zero if AL pins are Schmitt input`	579	`UCHAR EndpointSize; // Endpoint size`
580	`UCHAR ALDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	580	`UCHAR PullDownEnableR; // non-zero if pull down enabled`
581	`UCHAR AHSlowSlew; // non-zero if AH pins have slow slew`	581	`UCHAR SerNumEnableR; // non-zero if serial number to be used`
582	`UCHAR AHSchmittInput; // non-zero if AH pins are Schmitt input`	582	`UCHAR InvertTXD; // non-zero if invert TXD`
583	`UCHAR AHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	583	`UCHAR InvertRXD; // non-zero if invert RXD`
584	`UCHAR BLSlowSlew; // non-zero if BL pins have slow slew`	584	`UCHAR InvertRTS; // non-zero if invert RTS`
585	`UCHAR BLSchmittInput; // non-zero if BL pins are Schmitt input`	585	`UCHAR InvertCTS; // non-zero if invert CTS`
586	`UCHAR BLDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	586	`UCHAR InvertDTR; // non-zero if invert DTR`
587	`UCHAR BHSlowSlew; // non-zero if BH pins have slow slew`	587	`UCHAR InvertDSR; // non-zero if invert DSR`
588	`UCHAR BHSchmittInput; // non-zero if BH pins are Schmitt input`	588	`UCHAR InvertDCD; // non-zero if invert DCD`
589	`UCHAR BHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	589	`UCHAR InvertRI; // non-zero if invert RI`
590	`UCHAR IFAIsFifo7; // non-zero if interface is 245 FIFO`	590	`UCHAR Cbus0; // Cbus Mux control`
591	`UCHAR IFAIsFifoTar7; // non-zero if interface is 245 FIFO CPU target`	591	`UCHAR Cbus1; // Cbus Mux control`
592	`UCHAR IFAIsFastSer7; // non-zero if interface is Fast serial`	592	`UCHAR Cbus2; // Cbus Mux control`
593	`UCHAR AIsVCP7; // non-zero if interface is to use VCP drivers`	593	`UCHAR Cbus3; // Cbus Mux control`
594	`UCHAR IFBIsFifo7; // non-zero if interface is 245 FIFO`	594	`UCHAR Cbus4; // Cbus Mux control`
595	`UCHAR IFBIsFifoTar7; // non-zero if interface is 245 FIFO CPU target`	595	`UCHAR RIsD2XX; // non-zero if using D2XX driver`
596	`UCHAR IFBIsFastSer7; // non-zero if interface is Fast serial`	596	`//`
597	`UCHAR BIsVCP7; // non-zero if interface is to use VCP drivers`	597	`// Rev 7 (FT2232H) Extensions`
598	`UCHAR PowerSaveEnable; // non-zero if using BCBUS7 to save power for self-powered designs`	598	`//`
599	`//`	599	`UCHAR PullDownEnable7; // non-zero if pull down enabled`
600	`// Rev 8 (FT4232H) Extensions`	600	`UCHAR SerNumEnable7; // non-zero if serial number to be used`
601	`//`	601	`UCHAR ALSlowSlew; // non-zero if AL pins have slow slew`
602	`UCHAR PullDownEnable8; // non-zero if pull down enabled`	602	`UCHAR ALSchmittInput; // non-zero if AL pins are Schmitt input`
603	`UCHAR SerNumEnable8; // non-zero if serial number to be used`	603	`UCHAR ALDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
604	`UCHAR ASlowSlew; // non-zero if AL pins have slow slew`	604	`UCHAR AHSlowSlew; // non-zero if AH pins have slow slew`
605	`UCHAR ASchmittInput; // non-zero if AL pins are Schmitt input`	605	`UCHAR AHSchmittInput; // non-zero if AH pins are Schmitt input`
606	`UCHAR ADriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	606	`UCHAR AHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
607	`UCHAR BSlowSlew; // non-zero if AH pins have slow slew`	607	`UCHAR BLSlowSlew; // non-zero if BL pins have slow slew`
608	`UCHAR BSchmittInput; // non-zero if AH pins are Schmitt input`	608	`UCHAR BLSchmittInput; // non-zero if BL pins are Schmitt input`
609	`UCHAR BDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	609	`UCHAR BLDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
610	`UCHAR CSlowSlew; // non-zero if BL pins have slow slew`	610	`UCHAR BHSlowSlew; // non-zero if BH pins have slow slew`
611	`UCHAR CSchmittInput; // non-zero if BL pins are Schmitt input`	611	`UCHAR BHSchmittInput; // non-zero if BH pins are Schmitt input`
612	`UCHAR CDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	612	`UCHAR BHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
613	`UCHAR DSlowSlew; // non-zero if BH pins have slow slew`	613	`UCHAR IFAIsFifo7; // non-zero if interface is 245 FIFO`
614	`UCHAR DSchmittInput; // non-zero if BH pins are Schmitt input`	614	`UCHAR IFAIsFifoTar7; // non-zero if interface is 245 FIFO CPU target`
615	`UCHAR DDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`	615	`UCHAR IFAIsFastSer7; // non-zero if interface is Fast serial`
616	`UCHAR ARIIsTXDEN; // non-zero if port A uses RI as RS485 TXDEN`	616	`UCHAR AIsVCP7; // non-zero if interface is to use VCP drivers`
617	`UCHAR BRIIsTXDEN; // non-zero if port B uses RI as RS485 TXDEN`	617	`UCHAR IFBIsFifo7; // non-zero if interface is 245 FIFO`
618	`UCHAR CRIIsTXDEN; // non-zero if port C uses RI as RS485 TXDEN`	618	`UCHAR IFBIsFifoTar7; // non-zero if interface is 245 FIFO CPU target`
619	`UCHAR DRIIsTXDEN; // non-zero if port D uses RI as RS485 TXDEN`	619	`UCHAR IFBIsFastSer7; // non-zero if interface is Fast serial`
620	`UCHAR AIsVCP8; // non-zero if interface is to use VCP drivers`	620	`UCHAR BIsVCP7; // non-zero if interface is to use VCP drivers`
621	`UCHAR BIsVCP8; // non-zero if interface is to use VCP drivers`	621	`UCHAR PowerSaveEnable; // non-zero if using BCBUS7 to save power for self-powered designs`
622	`UCHAR CIsVCP8; // non-zero if interface is to use VCP drivers`	622	`//`
623	`UCHAR DIsVCP8; // non-zero if interface is to use VCP drivers`	623	`// Rev 8 (FT4232H) Extensions`
624	`//`	624	`//`
625	`// Rev 9 (FT232H) Extensions`	625	`UCHAR PullDownEnable8; // non-zero if pull down enabled`
626	`//`	626	`UCHAR SerNumEnable8; // non-zero if serial number to be used`
627	`UCHAR PullDownEnableH; // non-zero if pull down enabled`	627	`UCHAR ASlowSlew; // non-zero if A pins have slow slew`
628	`UCHAR SerNumEnableH; // non-zero if serial number to be used`	628	`UCHAR ASchmittInput; // non-zero if A pins are Schmitt input`
629	`UCHAR ACSlowSlewH; // non-zero if AC pins have slow slew`	629	`UCHAR ADriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
630	`UCHAR ACSchmittInputH; // non-zero if AC pins are Schmitt input`	630	`UCHAR BSlowSlew; // non-zero if B pins have slow slew`
631	`UCHAR ACDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA`	631	`UCHAR BSchmittInput; // non-zero if B pins are Schmitt input`
632	`UCHAR ADSlowSlewH; // non-zero if AD pins have slow slew`	632	`UCHAR BDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
633	`UCHAR ADSchmittInputH; // non-zero if AD pins are Schmitt input`	633	`UCHAR CSlowSlew; // non-zero if C pins have slow slew`
634	`UCHAR ADDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA`	634	`UCHAR CSchmittInput; // non-zero if C pins are Schmitt input`
635	`UCHAR Cbus0H; // Cbus Mux control`	635	`UCHAR CDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
636	`UCHAR Cbus1H; // Cbus Mux control`	636	`UCHAR DSlowSlew; // non-zero if D pins have slow slew`
637	`UCHAR Cbus2H; // Cbus Mux control`	637	`UCHAR DSchmittInput; // non-zero if D pins are Schmitt input`
638	`UCHAR Cbus3H; // Cbus Mux control`	638	`UCHAR DDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
639	`UCHAR Cbus4H; // Cbus Mux control`	639	`UCHAR ARIIsTXDEN; // non-zero if port A uses RI as RS485 TXDEN`
640	`UCHAR Cbus5H; // Cbus Mux control`	640	`UCHAR BRIIsTXDEN; // non-zero if port B uses RI as RS485 TXDEN`
641	`UCHAR Cbus6H; // Cbus Mux control`	641	`UCHAR CRIIsTXDEN; // non-zero if port C uses RI as RS485 TXDEN`
642	`UCHAR Cbus7H; // Cbus Mux control`	642	`UCHAR DRIIsTXDEN; // non-zero if port D uses RI as RS485 TXDEN`
643	`UCHAR Cbus8H; // Cbus Mux control`	643	`UCHAR AIsVCP8; // non-zero if interface is to use VCP drivers`
644	`UCHAR Cbus9H; // Cbus Mux control`	644	`UCHAR BIsVCP8; // non-zero if interface is to use VCP drivers`
645	`UCHAR IsFifoH; // non-zero if interface is 245 FIFO`	645	`UCHAR CIsVCP8; // non-zero if interface is to use VCP drivers`
646	`UCHAR IsFifoTarH; // non-zero if interface is 245 FIFO CPU target`	646	`UCHAR DIsVCP8; // non-zero if interface is to use VCP drivers`
647	`UCHAR IsFastSerH; // non-zero if interface is Fast serial`	647	`//`
648	`UCHAR IsFT1248H; // non-zero if interface is FT1248`	648	`// Rev 9 (FT232H) Extensions`
649	`UCHAR FT1248CpolH; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)`	649	`//`
650	`UCHAR FT1248LsbH; // FT1248 data is LSB (1) or MSB (0)`	650	`UCHAR PullDownEnableH; // non-zero if pull down enabled`
651	`UCHAR FT1248FlowControlH; // FT1248 flow control enable`	651	`UCHAR SerNumEnableH; // non-zero if serial number to be used`
652	`UCHAR IsVCPH; // non-zero if interface is to use VCP drivers`	652	`UCHAR ACSlowSlewH; // non-zero if AC pins have slow slew`
653	`UCHAR PowerSaveEnableH; // non-zero if using ACBUS7 to save power for self-powered designs`	653	`UCHAR ACSchmittInputH; // non-zero if AC pins are Schmitt input`
654		654	`UCHAR ACDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA`
655	`} FT_PROGRAM_DATA, *PFT_PROGRAM_DATA;`	655	`UCHAR ADSlowSlewH; // non-zero if AD pins have slow slew`
656		656	`UCHAR ADSchmittInputH; // non-zero if AD pins are Schmitt input`
657		657	`UCHAR ADDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA`
658	`FTD2XX_API`	658	`UCHAR Cbus0H; // Cbus Mux control`
659	`FT_STATUS WINAPI FT_EE_Program(`	659	`UCHAR Cbus1H; // Cbus Mux control`
660	`FT_HANDLE ftHandle,`	660	`UCHAR Cbus2H; // Cbus Mux control`
661	`PFT_PROGRAM_DATA pData`	661	`UCHAR Cbus3H; // Cbus Mux control`
662	`);`	662	`UCHAR Cbus4H; // Cbus Mux control`
663		663	`UCHAR Cbus5H; // Cbus Mux control`
664	`FTD2XX_API`	664	`UCHAR Cbus6H; // Cbus Mux control`
665	`FT_STATUS WINAPI FT_EE_ProgramEx(`	665	`UCHAR Cbus7H; // Cbus Mux control`
666	`FT_HANDLE ftHandle,`	666	`UCHAR Cbus8H; // Cbus Mux control`
667	`PFT_PROGRAM_DATA lpData,`	667	`UCHAR Cbus9H; // Cbus Mux control`
668	`char *Manufacturer,`	668	`UCHAR IsFifoH; // non-zero if interface is 245 FIFO`
669	`char *ManufacturerId,`	669	`UCHAR IsFifoTarH; // non-zero if interface is 245 FIFO CPU target`
670	`char *Description,`	670	`UCHAR IsFastSerH; // non-zero if interface is Fast serial`
671	`char *SerialNumber`	671	`UCHAR IsFT1248H; // non-zero if interface is FT1248`
672	`);`	672	`UCHAR FT1248CpolH; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)`
673		673	`UCHAR FT1248LsbH; // FT1248 data is LSB (1) or MSB (0)`
674	`FTD2XX_API`	674	`UCHAR FT1248FlowControlH; // FT1248 flow control enable`
675	`FT_STATUS WINAPI FT_EE_Read(`	675	`UCHAR IsVCPH; // non-zero if interface is to use VCP drivers`
676	`FT_HANDLE ftHandle,`	676	`UCHAR PowerSaveEnableH; // non-zero if using ACBUS7 to save power for self-powered designs`
677	`PFT_PROGRAM_DATA pData`	677
678	`);`	678	`} FT_PROGRAM_DATA, *PFT_PROGRAM_DATA;`
679		679
680	`FTD2XX_API`	680	`FTD2XX_API`
681	`FT_STATUS WINAPI FT_EE_ReadEx(`	681	`FT_STATUS WINAPI FT_EE_Program(`
682	`FT_HANDLE ftHandle,`	682	`FT_HANDLE ftHandle,`
683	`PFT_PROGRAM_DATA lpData,`	683	`PFT_PROGRAM_DATA pData`
684	`char *Manufacturer,`	684	`);`
685	`char *ManufacturerId,`	685
686	`char *Description,`	686	`FTD2XX_API`
687	`char *SerialNumber`	687	`FT_STATUS WINAPI FT_EE_ProgramEx(`
688	`);`	688	`FT_HANDLE ftHandle,`
689		689	`PFT_PROGRAM_DATA pData,`
690	`FTD2XX_API`	690	`char *Manufacturer,`
691	`FT_STATUS WINAPI FT_EE_UASize(`	691	`char *ManufacturerId,`
692	`FT_HANDLE ftHandle,`	692	`char *Description,`
693	`LPDWORD lpdwSize`	693	`char *SerialNumber`
694	`);`	694	`);`
695		695
696	`FTD2XX_API`	696	`FTD2XX_API`
697	`FT_STATUS WINAPI FT_EE_UAWrite(`	697	`FT_STATUS WINAPI FT_EE_Read(`
698	`FT_HANDLE ftHandle,`	698	`FT_HANDLE ftHandle,`
699	`PUCHAR pucData,`	699	`PFT_PROGRAM_DATA pData`
700	`DWORD dwDataLen`	700	`);`
701	`);`	701
702		702	`FTD2XX_API`
703	`FTD2XX_API`	703	`FT_STATUS WINAPI FT_EE_ReadEx(`
704	`FT_STATUS WINAPI FT_EE_UARead(`	704	`FT_HANDLE ftHandle,`
705	`FT_HANDLE ftHandle,`	705	`PFT_PROGRAM_DATA pData,`
706	`PUCHAR pucData,`	706	`char *Manufacturer,`
707	`DWORD dwDataLen,`	707	`char *ManufacturerId,`
708	`LPDWORD lpdwBytesRead`	708	`char *Description,`
709	`);`	709	`char *SerialNumber`
710		710	`);`
711	`FTD2XX_API`	711
712	`FT_STATUS WINAPI FT_SetLatencyTimer(`	712	`FTD2XX_API`
713	`FT_HANDLE ftHandle,`	713	`FT_STATUS WINAPI FT_EE_UASize(`
714	`UCHAR ucLatency`	714	`FT_HANDLE ftHandle,`
715	`);`	715	`LPDWORD lpdwSize`
716		716	`);`
717	`FTD2XX_API`	717
718	`FT_STATUS WINAPI FT_GetLatencyTimer(`	718	`FTD2XX_API`
719	`FT_HANDLE ftHandle,`	719	`FT_STATUS WINAPI FT_EE_UAWrite(`
720	`PUCHAR pucLatency`	720	`FT_HANDLE ftHandle,`
721	`);`	721	`PUCHAR pucData,`
722		722	`DWORD dwDataLen`
723	`FTD2XX_API`	723	`);`
724	`FT_STATUS WINAPI FT_SetBitMode(`	724
725	`FT_HANDLE ftHandle,`	725	`FTD2XX_API`
726	`UCHAR ucMask,`	726	`FT_STATUS WINAPI FT_EE_UARead(`
727	`UCHAR ucEnable`	727	`FT_HANDLE ftHandle,`
728	`);`	728	`PUCHAR pucData,`
729		729	`DWORD dwDataLen,`
730	`FTD2XX_API`	730	`LPDWORD lpdwBytesRead`
731	`FT_STATUS WINAPI FT_GetBitMode(`	731	`);`
732	`FT_HANDLE ftHandle,`	732
733	`PUCHAR pucMode`	733
734	`);`	734	`typedef struct ft_eeprom_header {`
735		735	`FT_DEVICE deviceType; // FTxxxx device type to be programmed`
736	`FTD2XX_API`	736	`// Device descriptor options`
737	`FT_STATUS WINAPI FT_SetUSBParameters(`	737	`WORD VendorId; // 0x0403`
738	`FT_HANDLE ftHandle,`	738	`WORD ProductId; // 0x6001`
739	`ULONG ulInTransferSize,`	739	`UCHAR SerNumEnable; // non-zero if serial number to be used`
740	`ULONG ulOutTransferSize`	740	`// Config descriptor options`
741	`);`	741	`WORD MaxPower; // 0 < MaxPower <= 500`
742		742	`UCHAR SelfPowered; // 0 = bus powered, 1 = self powered`
743	`FTD2XX_API`	743	`UCHAR RemoteWakeup; // 0 = not capable, 1 = capable`
744	`FT_STATUS WINAPI FT_GetDeviceInfo(`	744	`// Hardware options`
745	`FT_HANDLE ftHandle,`	745	`UCHAR PullDownEnable; // non-zero if pull down in suspend enabled`
746	`FT_DEVICE *lpftDevice,`	746	`} FT_EEPROM_HEADER, *PFT_EEPROM_HEADER;`
747	`LPDWORD lpdwID,`	747
748	`PCHAR SerialNumber,`	748
749	`PCHAR Description,`	749	`// FT232B EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
750	`LPVOID Dummy`	750	`typedef struct ft_eeprom_232b {`
751	`);`	751	`// Common header`
752		752	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
753	`FTD2XX_API`	753	`} FT_EEPROM_232B, *PFT_EEPROM_232B;`
754	`FT_STATUS WINAPI FT_GetDeviceLocId(`	754
755	`FT_HANDLE ftHandle,`	755
756	`LPDWORD lpdwLocId`	756	`// FT2232 EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
757	`);`	757	`typedef struct ft_eeprom_2232 {`
758		758	`// Common header`
759	`FTD2XX_API`	759	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
760	`FT_STATUS WINAPI FT_StopInTask(`	760	`// Drive options`
761	`FT_HANDLE ftHandle`	761	`UCHAR AIsHighCurrent; // non-zero if interface is high current`
762	`);`	762	`UCHAR BIsHighCurrent; // non-zero if interface is high current`
763		763	`// Hardware options`
764	`FTD2XX_API`	764	`UCHAR AIsFifo; // non-zero if interface is 245 FIFO`
765	`FT_STATUS WINAPI FT_RestartInTask(`	765	`UCHAR AIsFifoTar; // non-zero if interface is 245 FIFO CPU target`
766	`FT_HANDLE ftHandle`	766	`UCHAR AIsFastSer; // non-zero if interface is Fast serial`
767	`);`	767	`UCHAR BIsFifo; // non-zero if interface is 245 FIFO`
768		768	`UCHAR BIsFifoTar; // non-zero if interface is 245 FIFO CPU target`
769	`FTD2XX_API`	769	`UCHAR BIsFastSer; // non-zero if interface is Fast serial`
770	`FT_STATUS WINAPI FT_SetResetPipeRetryCount(`	770	`// Driver option`
771	`FT_HANDLE ftHandle,`	771	`UCHAR ADriverType; //`
772	`DWORD dwCount`	772	`UCHAR BDriverType; //`
773	`);`	773	`} FT_EEPROM_2232, *PFT_EEPROM_2232;`
774		774
775	`FTD2XX_API`	775
776	`FT_STATUS WINAPI FT_ResetPort(`	776	`// FT232R EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
777	`FT_HANDLE ftHandle`	777	`typedef struct ft_eeprom_232r {`
778	`);`	778	`// Common header`
779		779	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
780	`FTD2XX_API`	780	`// Drive options`
781	`FT_STATUS WINAPI FT_CyclePort(`	781	`UCHAR IsHighCurrent; // non-zero if interface is high current`
782	`FT_HANDLE ftHandle`	782	`// Hardware options`
783	`);`	783	`UCHAR UseExtOsc; // Use External Oscillator`
784		784	`UCHAR InvertTXD; // non-zero if invert TXD`
785	`//`	785	`UCHAR InvertRXD; // non-zero if invert RXD`
786	`// Win32-type functions`	786	`UCHAR InvertRTS; // non-zero if invert RTS`
787	`//`	787	`UCHAR InvertCTS; // non-zero if invert CTS`
788		788	`UCHAR InvertDTR; // non-zero if invert DTR`
789	`FTD2XX_API`	789	`UCHAR InvertDSR; // non-zero if invert DSR`
790	`FT_HANDLE WINAPI FT_W32_CreateFile(`	790	`UCHAR InvertDCD; // non-zero if invert DCD`
791	`LPCSTR lpszName,`	791	`UCHAR InvertRI; // non-zero if invert RI`
792	`DWORD dwAccess,`	792	`UCHAR Cbus0; // Cbus Mux control`
793	`DWORD dwShareMode,`	793	`UCHAR Cbus1; // Cbus Mux control`
794	`LPSECURITY_ATTRIBUTES lpSecurityAttributes,`	794	`UCHAR Cbus2; // Cbus Mux control`
795	`DWORD dwCreate,`	795	`UCHAR Cbus3; // Cbus Mux control`
796	`DWORD dwAttrsAndFlags,`	796	`UCHAR Cbus4; // Cbus Mux control`
797	`HANDLE hTemplate`	797	`// Driver option`
798	`);`	798	`UCHAR DriverType; //`
799		799	`} FT_EEPROM_232R, *PFT_EEPROM_232R;`
800	`FTD2XX_API`	800
801	`BOOL WINAPI FT_W32_CloseHandle(`	801
802	`FT_HANDLE ftHandle`	802	`// FT2232H EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
803	`);`	803	`typedef struct ft_eeprom_2232h {`
804		804	`// Common header`
805	`FTD2XX_API`	805	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
806	`BOOL WINAPI FT_W32_ReadFile(`	806	`// Drive options`
807	`FT_HANDLE ftHandle,`	807	`UCHAR ALSlowSlew; // non-zero if AL pins have slow slew`
808	`LPVOID lpBuffer,`	808	`UCHAR ALSchmittInput; // non-zero if AL pins are Schmitt input`
809	`DWORD nBufferSize,`	809	`UCHAR ALDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
810	`LPDWORD lpBytesReturned,`	810	`UCHAR AHSlowSlew; // non-zero if AH pins have slow slew`
811	`LPOVERLAPPED lpOverlapped`	811	`UCHAR AHSchmittInput; // non-zero if AH pins are Schmitt input`
812	`);`	812	`UCHAR AHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
813		813	`UCHAR BLSlowSlew; // non-zero if BL pins have slow slew`
814	`FTD2XX_API`	814	`UCHAR BLSchmittInput; // non-zero if BL pins are Schmitt input`
815	`BOOL WINAPI FT_W32_WriteFile(`	815	`UCHAR BLDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
816	`FT_HANDLE ftHandle,`	816	`UCHAR BHSlowSlew; // non-zero if BH pins have slow slew`
817	`LPVOID lpBuffer,`	817	`UCHAR BHSchmittInput; // non-zero if BH pins are Schmitt input`
818	`DWORD nBufferSize,`	818	`UCHAR BHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
819	`LPDWORD lpBytesWritten,`	819	`// Hardware options`
820	`LPOVERLAPPED lpOverlapped`	820	`UCHAR AIsFifo; // non-zero if interface is 245 FIFO`
821	`);`	821	`UCHAR AIsFifoTar; // non-zero if interface is 245 FIFO CPU target`
822		822	`UCHAR AIsFastSer; // non-zero if interface is Fast serial`
823	`FTD2XX_API`	823	`UCHAR BIsFifo; // non-zero if interface is 245 FIFO`
824	`DWORD WINAPI FT_W32_GetLastError(`	824	`UCHAR BIsFifoTar; // non-zero if interface is 245 FIFO CPU target`
825	`FT_HANDLE ftHandle`	825	`UCHAR BIsFastSer; // non-zero if interface is Fast serial`
826	`);`	826	`UCHAR PowerSaveEnable; // non-zero if using BCBUS7 to save power for self-powered designs`
827		827	`// Driver option`
828	`FTD2XX_API`	828	`UCHAR ADriverType; //`
829	`BOOL WINAPI FT_W32_GetOverlappedResult(`	829	`UCHAR BDriverType; //`
830	`FT_HANDLE ftHandle,`	830	`} FT_EEPROM_2232H, *PFT_EEPROM_2232H;`
831	`LPOVERLAPPED lpOverlapped,`	831
832	`LPDWORD lpdwBytesTransferred,`	832
833	`BOOL bWait`	833	`// FT4232H EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
834	`);`	834	`typedef struct ft_eeprom_4232h {`
835		835	`// Common header`
836	`FTD2XX_API`	836	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
837	`BOOL WINAPI FT_W32_CancelIo(`	837	`// Drive options`
838	`FT_HANDLE ftHandle`	838	`UCHAR ASlowSlew; // non-zero if A pins have slow slew`
839	`);`	839	`UCHAR ASchmittInput; // non-zero if A pins are Schmitt input`
840		840	`UCHAR ADriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
841		841	`UCHAR BSlowSlew; // non-zero if B pins have slow slew`
842	`//`	842	`UCHAR BSchmittInput; // non-zero if B pins are Schmitt input`
843	`// Win32 COMM API type functions`	843	`UCHAR BDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
844	`//`	844	`UCHAR CSlowSlew; // non-zero if C pins have slow slew`
845	`typedef struct _FTCOMSTAT {`	845	`UCHAR CSchmittInput; // non-zero if C pins are Schmitt input`
846	`DWORD fCtsHold : 1;`	846	`UCHAR CDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
847	`DWORD fDsrHold : 1;`	847	`UCHAR DSlowSlew; // non-zero if D pins have slow slew`
848	`DWORD fRlsdHold : 1;`	848	`UCHAR DSchmittInput; // non-zero if D pins are Schmitt input`
849	`DWORD fXoffHold : 1;`	849	`UCHAR DDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
850	`DWORD fXoffSent : 1;`	850	`// Hardware options`
851	`DWORD fEof : 1;`	851	`UCHAR ARIIsTXDEN; // non-zero if port A uses RI as RS485 TXDEN`
852	`DWORD fTxim : 1;`	852	`UCHAR BRIIsTXDEN; // non-zero if port B uses RI as RS485 TXDEN`
853	`DWORD fReserved : 25;`	853	`UCHAR CRIIsTXDEN; // non-zero if port C uses RI as RS485 TXDEN`
854	`DWORD cbInQue;`	854	`UCHAR DRIIsTXDEN; // non-zero if port D uses RI as RS485 TXDEN`
855	`DWORD cbOutQue;`	855	`// Driver option`
856	`} FTCOMSTAT, *LPFTCOMSTAT;`	856	`UCHAR ADriverType; //`
857		857	`UCHAR BDriverType; //`
858	`typedef struct _FTDCB {`	858	`UCHAR CDriverType; //`
859	`DWORD DCBlength; /* sizeof(FTDCB) */`	859	`UCHAR DDriverType; //`
860	`DWORD BaudRate; /* Baudrate at which running */`	860	`} FT_EEPROM_4232H, *PFT_EEPROM_4232H;`
861	`DWORD fBinary: 1; /* Binary Mode (skip EOF check) */`	861
862	`DWORD fParity: 1; /* Enable parity checking */`	862
863	`DWORD fOutxCtsFlow:1; /* CTS handshaking on output */`	863	`// FT232H EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
864	`DWORD fOutxDsrFlow:1; /* DSR handshaking on output */`	864	`typedef struct ft_eeprom_232h {`
865	`DWORD fDtrControl:2; /* DTR Flow control */`	865	`// Common header`
866	`DWORD fDsrSensitivity:1; /* DSR Sensitivity */`	866	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
867	`DWORD fTXContinueOnXoff: 1; /* Continue TX when Xoff sent */`	867	`// Drive options`
868	`DWORD fOutX: 1; /* Enable output X-ON/X-OFF */`	868	`UCHAR ACSlowSlew; // non-zero if AC bus pins have slow slew`
869	`DWORD fInX: 1; /* Enable input X-ON/X-OFF */`	869	`UCHAR ACSchmittInput; // non-zero if AC bus pins are Schmitt input`
870	`DWORD fErrorChar: 1; /* Enable Err Replacement */`	870	`UCHAR ACDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
871	`DWORD fNull: 1; /* Enable Null stripping */`	871	`UCHAR ADSlowSlew; // non-zero if AD bus pins have slow slew`
872	`DWORD fRtsControl:2; /* Rts Flow control */`	872	`UCHAR ADSchmittInput; // non-zero if AD bus pins are Schmitt input`
873	`DWORD fAbortOnError:1; /* Abort all reads and writes on Error */`	873	`UCHAR ADDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
874	`DWORD fDummy2:17; /* Reserved */`	874	`// CBUS options`
875	`WORD wReserved; /* Not currently used */`	875	`UCHAR Cbus0; // Cbus Mux control`
876	`WORD XonLim; /* Transmit X-ON threshold */`	876	`UCHAR Cbus1; // Cbus Mux control`
877	`WORD XoffLim; /* Transmit X-OFF threshold */`	877	`UCHAR Cbus2; // Cbus Mux control`
878	`BYTE ByteSize; /* Number of bits/byte, 4-8 */`	878	`UCHAR Cbus3; // Cbus Mux control`
879	`BYTE Parity; /* 0-4=None,Odd,Even,Mark,Space */`	879	`UCHAR Cbus4; // Cbus Mux control`
880	`BYTE StopBits; /* 0,1,2 = 1, 1.5, 2 */`	880	`UCHAR Cbus5; // Cbus Mux control`
881	`char XonChar; /* Tx and Rx X-ON character */`	881	`UCHAR Cbus6; // Cbus Mux control`
882	`char XoffChar; /* Tx and Rx X-OFF character */`	882	`UCHAR Cbus7; // Cbus Mux control`
883	`char ErrorChar; /* Error replacement char */`	883	`UCHAR Cbus8; // Cbus Mux control`
884	`char EofChar; /* End of Input character */`	884	`UCHAR Cbus9; // Cbus Mux control`
885	`char EvtChar; /* Received Event character */`	885	`// FT1248 options`
886	`WORD wReserved1; /* Fill for now. */`	886	`UCHAR FT1248Cpol; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)`
887	`} FTDCB, *LPFTDCB;`	887	`UCHAR FT1248Lsb; // FT1248 data is LSB (1) or MSB (0)`
888		888	`UCHAR FT1248FlowControl; // FT1248 flow control enable`
889	`typedef struct _FTTIMEOUTS {`	889	`// Hardware options`
890	`DWORD ReadIntervalTimeout; /* Maximum time between read chars. */`	890	`UCHAR IsFifo; // non-zero if interface is 245 FIFO`
891	`DWORD ReadTotalTimeoutMultiplier; /* Multiplier of characters. */`	891	`UCHAR IsFifoTar; // non-zero if interface is 245 FIFO CPU target`
892	`DWORD ReadTotalTimeoutConstant; /* Constant in milliseconds. */`	892	`UCHAR IsFastSer; // non-zero if interface is Fast serial`
893	`DWORD WriteTotalTimeoutMultiplier; /* Multiplier of characters. */`	893	`UCHAR IsFT1248 ; // non-zero if interface is FT1248`
894	`DWORD WriteTotalTimeoutConstant; /* Constant in milliseconds. */`	894	`UCHAR PowerSaveEnable; //`
895	`} FTTIMEOUTS,*LPFTTIMEOUTS;`	895	`// Driver option`
896		896	`UCHAR DriverType; //`
897		897	`} FT_EEPROM_232H, *PFT_EEPROM_232H;`
898	`FTD2XX_API`	898
899	`BOOL WINAPI FT_W32_ClearCommBreak(`	899
900	`FT_HANDLE ftHandle`	900	`// FT X Series EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program`
901	`);`	901	`typedef struct ft_eeprom_x_series {`
902		902	`// Common header`
903	`FTD2XX_API`	903	`FT_EEPROM_HEADER common; // common elements for all device EEPROMs`
904	`BOOL WINAPI FT_W32_ClearCommError(`	904	`// Drive options`
905	`FT_HANDLE ftHandle,`	905	`UCHAR ACSlowSlew; // non-zero if AC bus pins have slow slew`
906	`LPDWORD lpdwErrors,`	906	`UCHAR ACSchmittInput; // non-zero if AC bus pins are Schmitt input`
907	`LPFTCOMSTAT lpftComstat`	907	`UCHAR ACDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
908	`);`	908	`UCHAR ADSlowSlew; // non-zero if AD bus pins have slow slew`
909		909	`UCHAR ADSchmittInput; // non-zero if AD bus pins are Schmitt input`
910	`FTD2XX_API`	910	`UCHAR ADDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA`
911	`BOOL WINAPI FT_W32_EscapeCommFunction(`	911	`// CBUS options`
912	`FT_HANDLE ftHandle,`	912	`UCHAR Cbus0; // Cbus Mux control`
913	`DWORD dwFunc`	913	`UCHAR Cbus1; // Cbus Mux control`
914	`);`	914	`UCHAR Cbus2; // Cbus Mux control`
915		915	`UCHAR Cbus3; // Cbus Mux control`
916	`FTD2XX_API`	916	`UCHAR Cbus4; // Cbus Mux control`
917	`BOOL WINAPI FT_W32_GetCommModemStatus(`	917	`UCHAR Cbus5; // Cbus Mux control`
918	`FT_HANDLE ftHandle,`	918	`UCHAR Cbus6; // Cbus Mux control`
919	`LPDWORD lpdwModemStatus`	919	`// UART signal options`
920	`);`	920	`UCHAR InvertTXD; // non-zero if invert TXD`
921		921	`UCHAR InvertRXD; // non-zero if invert RXD`
922	`FTD2XX_API`	922	`UCHAR InvertRTS; // non-zero if invert RTS`
923	`BOOL WINAPI FT_W32_GetCommState(`	923	`UCHAR InvertCTS; // non-zero if invert CTS`
924	`FT_HANDLE ftHandle,`	924	`UCHAR InvertDTR; // non-zero if invert DTR`
925	`LPFTDCB lpftDcb`	925	`UCHAR InvertDSR; // non-zero if invert DSR`
926	`);`	926	`UCHAR InvertDCD; // non-zero if invert DCD`
927		927	`UCHAR InvertRI; // non-zero if invert RI`
928	`FTD2XX_API`	928	`// Battery Charge Detect options`
929	`BOOL WINAPI FT_W32_GetCommTimeouts(`	929	`UCHAR BCDEnable; // Enable Battery Charger Detection`
930	`FT_HANDLE ftHandle,`	930	`UCHAR BCDForceCbusPWREN; // asserts the power enable signal on CBUS when charging port detected`
931	`FTTIMEOUTS *pTimeouts`	931	`UCHAR BCDDisableSleep; // forces the device never to go into sleep mode`
932	`);`	932	`// I2C options`
933		933	`WORD I2CSlaveAddress; // I2C slave device address`
934	`FTD2XX_API`	934	`DWORD I2CDeviceId; // I2C device ID`
935	`BOOL WINAPI FT_W32_PurgeComm(`	935	`UCHAR I2CDisableSchmitt; // Disable I2C Schmitt trigger`
936	`FT_HANDLE ftHandle,`	936	`// FT1248 options`
937	`DWORD dwMask`	937	`UCHAR FT1248Cpol; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)`
938	`);`	938	`UCHAR FT1248Lsb; // FT1248 data is LSB (1) or MSB (0)`
939		939	`UCHAR FT1248FlowControl; // FT1248 flow control enable`
940	`FTD2XX_API`	940	`// Hardware options`
941	`BOOL WINAPI FT_W32_SetCommBreak(`	941	`UCHAR RS485EchoSuppress; //`
942	`FT_HANDLE ftHandle`	942	`UCHAR PowerSaveEnable; //`
943	`);`	943	`// Driver option`
944		944	`UCHAR DriverType; //`
945	`FTD2XX_API`	945	`} FT_EEPROM_X_SERIES, *PFT_EEPROM_X_SERIES;`
946	`BOOL WINAPI FT_W32_SetCommMask(`	946
947	`FT_HANDLE ftHandle,`	947
948	`ULONG ulEventMask`	948	`FTD2XX_API`
949	`);`	949	`FT_STATUS WINAPI FT_EEPROM_Read(`
950		950	`FT_HANDLE ftHandle,`
951	`FTD2XX_API`	951	`void *eepromData,`
952	`BOOL WINAPI FT_W32_SetCommState(`	952	`DWORD eepromDataSize,`
953	`FT_HANDLE ftHandle,`	953	`char *Manufacturer,`
954	`LPFTDCB lpftDcb`	954	`char *ManufacturerId,`
955	`);`	955	`char *Description,`
956		956	`char *SerialNumber`
957	`FTD2XX_API`	957	`);`
958	`BOOL WINAPI FT_W32_SetCommTimeouts(`	958
959	`FT_HANDLE ftHandle,`	959
960	`FTTIMEOUTS *pTimeouts`	960	`FTD2XX_API`
961	`);`	961	`FT_STATUS WINAPI FT_EEPROM_Program(`
962		962	`FT_HANDLE ftHandle,`
963	`FTD2XX_API`	963	`void *eepromData,`
964	`BOOL WINAPI FT_W32_SetupComm(`	964	`DWORD eepromDataSize,`
965	`FT_HANDLE ftHandle,`	965	`char *Manufacturer,`
966	`DWORD dwReadBufferSize,`	966	`char *ManufacturerId,`
967	`DWORD dwWriteBufferSize`	967	`char *Description,`
968	`);`	968	`char *SerialNumber`
969		969	`);`
970	`FTD2XX_API`	970
971	`BOOL WINAPI FT_W32_WaitCommEvent(`	971
972	`FT_HANDLE ftHandle,`	972	`FTD2XX_API`
973	`PULONG pulEvent,`	973	`FT_STATUS WINAPI FT_SetLatencyTimer(`
974	`LPOVERLAPPED lpOverlapped`	974	`FT_HANDLE ftHandle,`
975	`);`	975	`UCHAR ucLatency`
976		976	`);`
977	`//`	977
978	`// Device information`	978	`FTD2XX_API`
979	`//`	979	`FT_STATUS WINAPI FT_GetLatencyTimer(`
980		980	`FT_HANDLE ftHandle,`
981	`typedef struct _ft_device_list_info_node {`	981	`PUCHAR pucLatency`
982	`ULONG Flags;`	982	`);`
983	`ULONG Type;`	983
984	`ULONG ID;`	984	`FTD2XX_API`
985	`DWORD LocId;`	985	`FT_STATUS WINAPI FT_SetBitMode(`
986	`char SerialNumber[16];`	986	`FT_HANDLE ftHandle,`
987	`char Description[64];`	987	`UCHAR ucMask,`
988	`FT_HANDLE ftHandle;`	988	`UCHAR ucEnable`
989	`} FT_DEVICE_LIST_INFO_NODE;`	989	`);`
990		990
991	`// Device information flags`	991	`FTD2XX_API`
992	`enum {`	992	`FT_STATUS WINAPI FT_GetBitMode(`
993	`FT_FLAGS_OPENED = 1,`	993	`FT_HANDLE ftHandle,`
994	`FT_FLAGS_HISPEED = 2`	994	`PUCHAR pucMode`
995	`};`	995	`);`
996		996
997	`FTD2XX_API`	997	`FTD2XX_API`
998	`FT_STATUS WINAPI FT_CreateDeviceInfoList(`	998	`FT_STATUS WINAPI FT_SetUSBParameters(`
999	`LPDWORD lpdwNumDevs`	999	`FT_HANDLE ftHandle,`
1000	`);`	1000	`ULONG ulInTransferSize,`
1001		1001	`ULONG ulOutTransferSize`
1002	`FTD2XX_API`	1002	`);`
1003	`FT_STATUS WINAPI FT_GetDeviceInfoList(`	1003
1004	`FT_DEVICE_LIST_INFO_NODE *pDest,`	1004	`FTD2XX_API`
1005	`LPDWORD lpdwNumDevs`	1005	`FT_STATUS WINAPI FT_SetDeadmanTimeout(`
1006	`);`	1006	`FT_HANDLE ftHandle,`
1007		1007	`ULONG ulDeadmanTimeout`
1008	`FTD2XX_API`	1008	`);`
1009	`FT_STATUS WINAPI FT_GetDeviceInfoDetail(`	1009
1010	`DWORD dwIndex,`	1010	`#ifndef _WIN32`
1011	`LPDWORD lpdwFlags,`	1011	`// Extra functions for non-Windows platforms to compensate`
1012	`LPDWORD lpdwType,`	1012	`// for lack of .INF file to specify Vendor and Product IDs.`
1013	`LPDWORD lpdwID,`	1013
1014	`LPDWORD lpdwLocId,`	1014	`FTD2XX_API`
1015	`LPVOID lpSerialNumber,`	1015	`FT_STATUS FT_SetVIDPID(`
1016	`LPVOID lpDescription,`	1016	`DWORD dwVID,`
1017	`FT_HANDLE *pftHandle`	1017	`DWORD dwPID`
1018	`);`	1018	`);`
1019		1019
1020		1020	`FTD2XX_API`
1021	`//`	1021	`FT_STATUS FT_GetVIDPID(`
1022	`// Version information`	1022	`DWORD * pdwVID,`
1023	`//`	1023	`DWORD * pdwPID`
1024		1024	`);`
1025	`FTD2XX_API`	1025
1026	`FT_STATUS WINAPI FT_GetDriverVersion(`	1026	`FTD2XX_API`
1027	`FT_HANDLE ftHandle,`	1027	`FT_STATUS WINAPI FT_GetDeviceLocId(`
1028	`LPDWORD lpdwVersion`	1028	`FT_HANDLE ftHandle,`
1029	`);`	1029	`LPDWORD lpdwLocId`
1030		1030	`);`
1031	`FTD2XX_API`	1031	`#endif // _WIN32`
1032	`FT_STATUS WINAPI FT_GetLibraryVersion(`	1032
1033	`LPDWORD lpdwVersion`	1033	`FTD2XX_API`
1034	`);`	1034	`FT_STATUS WINAPI FT_GetDeviceInfo(`
1035		1035	`FT_HANDLE ftHandle,`
1036	`//`	1036	`FT_DEVICE *lpftDevice,`
1037	`// Events`	1037	`LPDWORD lpdwID,`
1038	`//`	1038	`PCHAR SerialNumber,`
1039		1039	`PCHAR Description,`
1040	`#define EV_RXCHAR 0x0001 // Any Character received`	1040	`LPVOID Dummy`
1041	`#define EV_RXFLAG 0x0002 // Received certain character`	1041	`);`
1042	`#define EV_TXEMPTY 0x0004 // Transmitt Queue Empty`	1042
1043	`#define EV_CTS 0x0008 // CTS changed state`	1043	`FTD2XX_API`
1044	`#define EV_DSR 0x0010 // DSR changed state`	1044	`FT_STATUS WINAPI FT_StopInTask(`
1045	`#define EV_RLSD 0x0020 // RLSD changed state`	1045	`FT_HANDLE ftHandle`
1046	`#define EV_BREAK 0x0040 // BREAK received`	1046	`);`
1047	`#define EV_ERR 0x0080 // Line status error occurred`	1047
1048	`#define EV_RING 0x0100 // Ring signal detected`	1048	`FTD2XX_API`
1049	`#define EV_PERR 0x0200 // Printer error occured`	1049	`FT_STATUS WINAPI FT_RestartInTask(`
1050	`#define EV_RX80FULL 0x0400 // Receive buffer is 80 percent full`	1050	`FT_HANDLE ftHandle`
1051	`#define EV_EVENT1 0x0800 // Provider specific event 1`	1051	`);`
1052	`#define EV_EVENT2 0x1000 // Provider specific event 2`	1052
1053		1053	`FTD2XX_API`
1054	`//`	1054	`FT_STATUS WINAPI FT_SetResetPipeRetryCount(`
1055	`// Escape Functions`	1055	`FT_HANDLE ftHandle,`
1056	`//`	1056	`DWORD dwCount`
1057		1057	`);`
1058	`#define SETXOFF 1 // Simulate XOFF received`	1058
1059	`#define SETXON 2 // Simulate XON received`	1059	`FTD2XX_API`
1060	`#define SETRTS 3 // Set RTS high`	1060	`FT_STATUS WINAPI FT_ResetPort(`
1061	`#define CLRRTS 4 // Set RTS low`	1061	`FT_HANDLE ftHandle`
1062	`#define SETDTR 5 // Set DTR high`	1062	`);`
1063	`#define CLRDTR 6 // Set DTR low`	1063
1064	`#define RESETDEV 7 // Reset device if possible`	1064	`FTD2XX_API`
1065	`#define SETBREAK 8 // Set the device break line.`	1065	`FT_STATUS WINAPI FT_CyclePort(`
1066	`#define CLRBREAK 9 // Clear the device break line.`	1066	`FT_HANDLE ftHandle`
1067		1067	`);`
1068	`//`	1068
1069	`// PURGE function flags.`	1069
1070	`//`	1070	`//`
1071	`#define PURGE_TXABORT 0x0001 // Kill the pending/current writes to the comm port.`	1071	`// Win32-type functions`
1072	`#define PURGE_RXABORT 0x0002 // Kill the pending/current reads to the comm port.`	1072	`//`
1073	`#define PURGE_TXCLEAR 0x0004 // Kill the transmit queue if there.`	1073
1074	`#define PURGE_RXCLEAR 0x0008 // Kill the typeahead buffer if there.`	1074	`FTD2XX_API`
1075		1075	`FT_HANDLE WINAPI FT_W32_CreateFile(`
1076	`#ifdef __cplusplus`	1076	`LPCTSTR lpszName,`
1077	`}`	1077	`DWORD dwAccess,`
1078	`#endif`	1078	`DWORD dwShareMode,`
1079		1079	`LPSECURITY_ATTRIBUTES lpSecurityAttributes,`
1080		1080	`DWORD dwCreate,`
1081	`#endif /* FTD2XX_H */`	1081	`DWORD dwAttrsAndFlags,`
1082		1082	`HANDLE hTemplate`
1083		1083	`);`
1084		1084
1085		1085	`FTD2XX_API`
1086		1086	`BOOL WINAPI FT_W32_CloseHandle(`
1087		1087	`FT_HANDLE ftHandle`
-		1088	`);`
-		1089
-		1090	`FTD2XX_API`
-		1091	`BOOL WINAPI FT_W32_ReadFile(`
-		1092	`FT_HANDLE ftHandle,`
-		1093	`LPVOID lpBuffer,`
-		1094	`DWORD nBufferSize,`
-		1095	`LPDWORD lpBytesReturned,`
-		1096	`LPOVERLAPPED lpOverlapped`
-		1097	`);`
-		1098
-		1099	`FTD2XX_API`
-		1100	`BOOL WINAPI FT_W32_WriteFile(`
-		1101	`FT_HANDLE ftHandle,`
-		1102	`LPVOID lpBuffer,`
-		1103	`DWORD nBufferSize,`
-		1104	`LPDWORD lpBytesWritten,`
-		1105	`LPOVERLAPPED lpOverlapped`
-		1106	`);`
-		1107
-		1108	`FTD2XX_API`
-		1109	`DWORD WINAPI FT_W32_GetLastError(`
-		1110	`FT_HANDLE ftHandle`
-		1111	`);`
-		1112
-		1113	`FTD2XX_API`
-		1114	`BOOL WINAPI FT_W32_GetOverlappedResult(`
-		1115	`FT_HANDLE ftHandle,`
-		1116	`LPOVERLAPPED lpOverlapped,`
-		1117	`LPDWORD lpdwBytesTransferred,`
-		1118	`BOOL bWait`
-		1119	`);`
-		1120
-		1121	`FTD2XX_API`
-		1122	`BOOL WINAPI FT_W32_CancelIo(`
-		1123	`FT_HANDLE ftHandle`
-		1124	`);`
-		1125
-		1126
-		1127	`//`
-		1128	`// Win32 COMM API type functions`
-		1129	`//`
-		1130	`typedef struct _FTCOMSTAT {`
-		1131	`DWORD fCtsHold : 1;`
-		1132	`DWORD fDsrHold : 1;`
-		1133	`DWORD fRlsdHold : 1;`
-		1134	`DWORD fXoffHold : 1;`
-		1135	`DWORD fXoffSent : 1;`
-		1136	`DWORD fEof : 1;`
-		1137	`DWORD fTxim : 1;`
-		1138	`DWORD fReserved : 25;`
-		1139	`DWORD cbInQue;`
-		1140	`DWORD cbOutQue;`
-		1141	`} FTCOMSTAT, *LPFTCOMSTAT;`
-		1142
-		1143	`typedef struct _FTDCB {`
-		1144	`DWORD DCBlength; /* sizeof(FTDCB) */`
-		1145	`DWORD BaudRate; /* Baudrate at which running */`
-		1146	`DWORD fBinary: 1; /* Binary Mode (skip EOF check) */`
-		1147	`DWORD fParity: 1; /* Enable parity checking */`
-		1148	`DWORD fOutxCtsFlow:1; /* CTS handshaking on output */`
-		1149	`DWORD fOutxDsrFlow:1; /* DSR handshaking on output */`
-		1150	`DWORD fDtrControl:2; /* DTR Flow control */`
-		1151	`DWORD fDsrSensitivity:1; /* DSR Sensitivity */`
-		1152	`DWORD fTXContinueOnXoff: 1; /* Continue TX when Xoff sent */`
-		1153	`DWORD fOutX: 1; /* Enable output X-ON/X-OFF */`
-		1154	`DWORD fInX: 1; /* Enable input X-ON/X-OFF */`
-		1155	`DWORD fErrorChar: 1; /* Enable Err Replacement */`
-		1156	`DWORD fNull: 1; /* Enable Null stripping */`
-		1157	`DWORD fRtsControl:2; /* Rts Flow control */`
-		1158	`DWORD fAbortOnError:1; /* Abort all reads and writes on Error */`
-		1159	`DWORD fDummy2:17; /* Reserved */`
-		1160	`WORD wReserved; /* Not currently used */`
-		1161	`WORD XonLim; /* Transmit X-ON threshold */`
-		1162	`WORD XoffLim; /* Transmit X-OFF threshold */`
-		1163	`BYTE ByteSize; /* Number of bits/byte, 4-8 */`
-		1164	`BYTE Parity; /* 0-4=None,Odd,Even,Mark,Space */`
-		1165	`BYTE StopBits; /* 0,1,2 = 1, 1.5, 2 */`
-		1166	`char XonChar; /* Tx and Rx X-ON character */`
-		1167	`char XoffChar; /* Tx and Rx X-OFF character */`
-		1168	`char ErrorChar; /* Error replacement char */`
-		1169	`char EofChar; /* End of Input character */`
-		1170	`char EvtChar; /* Received Event character */`
-		1171	`WORD wReserved1; /* Fill for now. */`
-		1172	`} FTDCB, *LPFTDCB;`
-		1173
-		1174	`typedef struct _FTTIMEOUTS {`
-		1175	`DWORD ReadIntervalTimeout; /* Maximum time between read chars. */`
-		1176	`DWORD ReadTotalTimeoutMultiplier; /* Multiplier of characters. */`
-		1177	`DWORD ReadTotalTimeoutConstant; /* Constant in milliseconds. */`
-		1178	`DWORD WriteTotalTimeoutMultiplier; /* Multiplier of characters. */`
-		1179	`DWORD WriteTotalTimeoutConstant; /* Constant in milliseconds. */`
-		1180	`} FTTIMEOUTS,*LPFTTIMEOUTS;`
-		1181
-		1182
-		1183	`FTD2XX_API`
-		1184	`BOOL WINAPI FT_W32_ClearCommBreak(`
-		1185	`FT_HANDLE ftHandle`
-		1186	`);`
-		1187
-		1188	`FTD2XX_API`
-		1189	`BOOL WINAPI FT_W32_ClearCommError(`
-		1190	`FT_HANDLE ftHandle,`
-		1191	`LPDWORD lpdwErrors,`
-		1192	`LPFTCOMSTAT lpftComstat`
-		1193	`);`
-		1194
-		1195	`FTD2XX_API`
-		1196	`BOOL WINAPI FT_W32_EscapeCommFunction(`
-		1197	`FT_HANDLE ftHandle,`
-		1198	`DWORD dwFunc`
-		1199	`);`
-		1200
-		1201	`FTD2XX_API`
-		1202	`BOOL WINAPI FT_W32_GetCommModemStatus(`
-		1203	`FT_HANDLE ftHandle,`
-		1204	`LPDWORD lpdwModemStatus`
-		1205	`);`
-		1206
-		1207	`FTD2XX_API`
-		1208	`BOOL WINAPI FT_W32_GetCommState(`
-		1209	`FT_HANDLE ftHandle,`
-		1210	`LPFTDCB lpftDcb`
-		1211	`);`
-		1212
-		1213	`FTD2XX_API`
-		1214	`BOOL WINAPI FT_W32_GetCommTimeouts(`
-		1215	`FT_HANDLE ftHandle,`
-		1216	`FTTIMEOUTS *pTimeouts`
-		1217	`);`
-		1218
-		1219	`FTD2XX_API`
-		1220	`BOOL WINAPI FT_W32_PurgeComm(`
-		1221	`FT_HANDLE ftHandle,`
-		1222	`DWORD dwMask`
-		1223	`);`
-		1224
-		1225	`FTD2XX_API`
-		1226	`BOOL WINAPI FT_W32_SetCommBreak(`
-		1227	`FT_HANDLE ftHandle`
-		1228	`);`
-		1229
-		1230	`FTD2XX_API`
-		1231	`BOOL WINAPI FT_W32_SetCommMask(`
-		1232	`FT_HANDLE ftHandle,`
-		1233	`ULONG ulEventMask`
-		1234	`);`
-		1235
-		1236	`FTD2XX_API`
-		1237	`BOOL WINAPI FT_W32_GetCommMask(`
-		1238	`FT_HANDLE ftHandle,`
-		1239	`LPDWORD lpdwEventMask`
-		1240	`);`
-		1241
-		1242	`FTD2XX_API`
-		1243	`BOOL WINAPI FT_W32_SetCommState(`
-		1244	`FT_HANDLE ftHandle,`
-		1245	`LPFTDCB lpftDcb`
-		1246	`);`
-		1247
-		1248	`FTD2XX_API`
-		1249	`BOOL WINAPI FT_W32_SetCommTimeouts(`
-		1250	`FT_HANDLE ftHandle,`
-		1251	`FTTIMEOUTS *pTimeouts`
-		1252	`);`
-		1253
-		1254	`FTD2XX_API`
-		1255	`BOOL WINAPI FT_W32_SetupComm(`
-		1256	`FT_HANDLE ftHandle,`
-		1257	`DWORD dwReadBufferSize,`
-		1258	`DWORD dwWriteBufferSize`
-		1259	`);`
-		1260
-		1261	`FTD2XX_API`
-		1262	`BOOL WINAPI FT_W32_WaitCommEvent(`
-		1263	`FT_HANDLE ftHandle,`
-		1264	`PULONG pulEvent,`
-		1265	`LPOVERLAPPED lpOverlapped`
-		1266	`);`
-		1267
-		1268
-		1269	`//`
-		1270	`// Device information`
-		1271	`//`
-		1272
-		1273	`typedef struct _ft_device_list_info_node {`
-		1274	`ULONG Flags;`
-		1275	`ULONG Type;`
-		1276	`ULONG ID;`
-		1277	`DWORD LocId;`
-		1278	`char SerialNumber[16];`
-		1279	`char Description[64];`
-		1280	`FT_HANDLE ftHandle;`
-		1281	`} FT_DEVICE_LIST_INFO_NODE;`
-		1282
-		1283	`// Device information flags`
-		1284	`enum {`
-		1285	`FT_FLAGS_OPENED = 1,`
-		1286	`FT_FLAGS_HISPEED = 2`
-		1287	`};`
-		1288
-		1289
-		1290	`FTD2XX_API`
-		1291	`FT_STATUS WINAPI FT_CreateDeviceInfoList(`
-		1292	`LPDWORD lpdwNumDevs`
-		1293	`);`
-		1294
-		1295	`FTD2XX_API`
-		1296	`FT_STATUS WINAPI FT_GetDeviceInfoList(`
-		1297	`FT_DEVICE_LIST_INFO_NODE *pDest,`
-		1298	`LPDWORD lpdwNumDevs`
-		1299	`);`
-		1300
-		1301	`FTD2XX_API`
-		1302	`FT_STATUS WINAPI FT_GetDeviceInfoDetail(`
-		1303	`DWORD dwIndex,`
-		1304	`LPDWORD lpdwFlags,`
-		1305	`LPDWORD lpdwType,`
-		1306	`LPDWORD lpdwID,`
-		1307	`LPDWORD lpdwLocId,`
-		1308	`LPVOID lpSerialNumber,`
-		1309	`LPVOID lpDescription,`
-		1310	`FT_HANDLE *pftHandle`
-		1311	`);`
-		1312
-		1313
-		1314	`//`
-		1315	`// Version information`
-		1316	`//`
-		1317
-		1318	`FTD2XX_API`
-		1319	`FT_STATUS WINAPI FT_GetDriverVersion(`
-		1320	`FT_HANDLE ftHandle,`
-		1321	`LPDWORD lpdwVersion`
-		1322	`);`
-		1323
-		1324	`FTD2XX_API`
-		1325	`FT_STATUS WINAPI FT_GetLibraryVersion(`
-		1326	`LPDWORD lpdwVersion`
-		1327	`);`
-		1328
-		1329
-		1330	`FTD2XX_API`
-		1331	`FT_STATUS WINAPI FT_Rescan(`
-		1332	`void`
-		1333	`);`
-		1334
-		1335	`FTD2XX_API`
-		1336	`FT_STATUS WINAPI FT_Reload(`
-		1337	`WORD wVid,`
-		1338	`WORD wPid`
-		1339	`);`
-		1340
-		1341	`FTD2XX_API`
-		1342	`FT_STATUS WINAPI FT_GetComPortNumber(`
-		1343	`FT_HANDLE ftHandle,`
-		1344	`LPLONG lpdwComPortNumber`
-		1345	`);`
-		1346
-		1347
-		1348	`//`
-		1349	`// FT232H additional EEPROM functions`
-		1350	`//`
-		1351
-		1352	`FTD2XX_API`
-		1353	`FT_STATUS WINAPI FT_EE_ReadConfig(`
-		1354	`FT_HANDLE ftHandle,`
-		1355	`UCHAR ucAddress,`
-		1356	`PUCHAR pucValue`
-		1357	`);`
-		1358
-		1359	`FTD2XX_API`
-		1360	`FT_STATUS WINAPI FT_EE_WriteConfig(`
-		1361	`FT_HANDLE ftHandle,`
-		1362	`UCHAR ucAddress,`
-		1363	`UCHAR ucValue`
-		1364	`);`
-		1365
-		1366	`FTD2XX_API`
-		1367	`FT_STATUS WINAPI FT_EE_ReadECC(`
-		1368	`FT_HANDLE ftHandle,`
-		1369	`UCHAR ucOption,`
-		1370	`LPWORD lpwValue`
-		1371	`);`
-		1372
-		1373	`FTD2XX_API`
-		1374	`FT_STATUS WINAPI FT_GetQueueStatusEx(`
-		1375	`FT_HANDLE ftHandle,`
-		1376	`DWORD *dwRxBytes`
-		1377	`);`
-		1378
-		1379	`FTD2XX_API`
-		1380	`FT_STATUS WINAPI FT_ComPortIdle(`
-		1381	`FT_HANDLE ftHandle`
-		1382	`);`
-		1383
-		1384	`FTD2XX_API`
-		1385	`FT_STATUS WINAPI FT_ComPortCancelIdle(`
-		1386	`FT_HANDLE ftHandle`
-		1387	`);`
-		1388
-		1389	`FTD2XX_API`
-		1390	`FT_STATUS WINAPI FT_VendorCmdGet(`
-		1391	`FT_HANDLE ftHandle,`
-		1392	`UCHAR Request,`
-		1393	`UCHAR *Buf,`
-		1394	`USHORT Len`
-		1395	`);`
-		1396
-		1397	`FTD2XX_API`
-		1398	`FT_STATUS WINAPI FT_VendorCmdSet(`
-		1399	`FT_HANDLE ftHandle,`
-		1400	`UCHAR Request,`
-		1401	`UCHAR *Buf,`
-		1402	`USHORT Len`
-		1403	`);`
-		1404
-		1405	`FTD2XX_API`
-		1406	`FT_STATUS WINAPI FT_VendorCmdGetEx(`
-		1407	`FT_HANDLE ftHandle,`
-		1408	`USHORT wValue,`
-		1409	`UCHAR *Buf,`
-		1410	`USHORT Len`
-		1411	`);`
-		1412
-		1413	`FTD2XX_API`
-		1414	`FT_STATUS WINAPI FT_VendorCmdSetEx(`
-		1415	`FT_HANDLE ftHandle,`
-		1416	`USHORT wValue,`
-		1417	`UCHAR *Buf,`
-		1418	`USHORT Len`
-		1419	`);`
-		1420
-		1421	`#ifdef __cplusplus`
-		1422	`}`
-		1423	`#endif`
-		1424
-		1425
-		1426	`#endif /* FTD2XX_H */`
-		1427

Subversion Repositories – MLAB

(root)/Modules/CPLD_FPGA/XILINX_XVC/XVC_SOFTWARE/XVC_1x/lib_linux/ftd2xx.h @ 4579

Rev 3090 → Rev 4530