use <configuration/sloupek.scad>use <configuration/plbase.scad>use <configuration/bocnice.scad>use <configuration/spodni_kryt.scad>use <configuration/otvory.scad>use <configuration/text/Write.scad>use <upravena_bocnice.scad>include <configuration/manufactury_conf.scad>include <configuration.scad>include <configuration/otvory_conf.scad>barva_sloupku = "cyan";barva_listy = "red";barva_celicka = "green";barva_plbase = "yellow";//translate([0.5*10.16,-5.08,14])// cube([10.16,10.16,10.16]);//BOCNICE SE DNEM//-------------------------------------------------------------upravena_bocnice();//PLBASE HORNI//-------------------------------------------------------------translate([plbase_tolerance_horni-0.2,+plbase_tolerance_horni-0.2,vyska_bocnice/2-tloustka_plbase/2])rotate(a=[0,0,0]){//plbase_vrchni_kryt(pocet_der1+2,pocet_der2+2,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,plbase_tolerance_horni);plbase_vrchni_kryt_pro_odecet(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice,-0.2,tloustka_plbase);}translate([0,0,-vyska_bocnice/2-2*tloustka_plbase])spodni_kryt(pocet_der1-1,pocet_der2-1,radidus_hrany,vzdalenost_der,vzdalenost_od_okraje,prumer_sroubu,vyska_bocnice,prekryti_der,tloustka_bocnice);