$fn=40; // model faces resolution.
include <../configuration.scad>


include <polyScrewThread_r1.scad>

PI=3.141592;


//Držák ložisek, rotoru, senzoru

module WINDGAUGE01A_S01()
    {
    //valec se zavitem
    union()  
        {
        difference()
        {
            union()
            {
            translate([0,0,S01_sila_materialu])
                screw_thread((S01_prumer_vnitrni-S01_tolerance_zavit),S01_hloubka_zavitu,55,S01_vyska_horni_zavit,PI/2,2);  
            
            //spodní doraz
            cylinder (h = S01_sila_materialu, r=S01_prumer_vnitrni/2+5/2*S01_sila_materialu, $fn=100);  


            //krycí ovál - usnadnění povolení
            difference()
            {
            cylinder (h = R01_vyska_preryti_statoru+5, r=S01_prumer_vnitrni/2+5/2*S01_sila_materialu, $fn=100); 

            cylinder (h = R01_vyska_preryti_statoru+5+0.01, r=S01_prumer_vnitrni/2+3/2*S01_sila_materialu, $fn=100);            
            
            } 
         
          
       
         
         
         
            
            }            

        //odstranění vnitřní výplně
        translate([0,0,S01_sila_materialu])
            cylinder (h = S01_vyska_horni_zavit+0.01, r=S01_prumer_vnitrni/2-S01_hloubka_zavitu/2-S01_sila_materialu, $fn=100); 
            
               
            //otvor na ložisko s vodiči         
        translate([0,0,S01_sila_materialu/2])           
            cylinder (h = S01_sila_materialu+0.01, r=(LO_spodni_prumer+0.2)/2, center = true, $fn=100);     
     
        }

//držák ložiska
 difference()
            {
 cylinder (h = LO_vyska_bez_krytu, r=(LO_spodni_prumer+2*S01_sila_materialu)/2, $fn=100); 
  
              translate([0,0,LO_vyska_bez_krytu])   
   cylinder(h=R02_zavit_vyska+100, r1=(LO_spodni_prumer+S01_sila_materialu)/2, r2=(LO_spodni_prumer+2*S01_sila_materialu)/2, center=false,$fn=100); 
               
                
                cylinder (h = LO_vyska_bez_krytu, r=(LO_spodni_prumer)/2, $fn=100);
                }
/*
//držák ložiska doraz                
 difference()
            {

  
              translate([0,0,LO_vyska_bez_krytu])   
   cylinder(h=2*S01_sila_materialu, r1=(LO_spodni_prumer+2*S01_sila_materialu)/2, r2=(LO_spodni_prumer)/2, center=false,$fn=100); 
               
             translate([0,0,LO_vyska_bez_krytu])   
   cylinder(h=2*S01_sila_materialu, r1=(LO_spodni_prumer)/2, r2=(LO_spodni_prumer-2*S01_sila_materialu)/2, center=false,$fn=100);    
                }                
                
        
   
*/
 }}

//sloupek na senzor
module SLOUPEK()
{    
translate([0,0,S01_sila_materialu]) 
    difference () 
    {
        
        cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky, r= sirka_matky/2+S01_sila_materialu, $fn=20);
        
        translate([0,0,R01_vyska_preryti_statoru+2*lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky-vyska_matky]) 
            cylinder (h = vyska_matky+0.01, r= (sirka_matky+0.2)/2, $fn=6);
        
        translate([0,0,-0.01]) 
            cylinder (h = R01_vyska_preryti_statoru+2*lozisko_vyska+2*S01_sila_materialu+2*S01_sila_materialu+vyska_hlavy_sroubu+magnet_vyska+vyska_matky+0.01, r= (prumer_sroubu+0.2)/2, $fn=40);
               
        translate([0,0,-0.01]) 
            cylinder (h = vyska_hlavy_sroubu-S01_sila_materialu, r= (prumer_hlavy_sroubu)/2, $fn=40);
    
        translate([0,0,vyska_hlavy_sroubu-S01_sila_materialu-0.02]) 
            cylinder(h=2+0.02, r1=(prumer_hlavy_sroubu)/2, r2=(prumer_sroubu+0.2)/2);  
    
    }       
}
   

  
WINDGAUGE01A_S01();