$fn=40; // model faces resolution.
include <../configuration.scad>
include <polyScrewThread_r1.scad>
PI=3.141592;
WINDGAUGE02A_L01();

//Model lopatky
module WINDGAUGE02A_L01()
        {
     difference()
        {       
        union()
        {
//koule vrchní
            translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+3*S01_sila_materialu)*2, $fn=100);       
            
            
//spodní válec        
cylinder (h = R01_vyska_preryti_statoru, r=S01_prumer_vnitrni/2+3*S01_sila_materialu, $fn=100); 
            
            
//lopatka 1   
translate([-L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
lopatka();
            
//lopatka 2 
          rotate([0, 0, 120])   
translate([-L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
lopatka();

//lopatka 3
         rotate([0, 0, 240])    
translate([-L01_hrana_drzaku_a/2,-(S01_prumer_vnitrni/2+2*S01_sila_materialu+L01_delka_uchytu+L01_prumer_lopatky/2),0])
lopatka();            


 
    }    

 //Odečet spodního válce
 translate([0,0,-(S01_prumer_vnitrni/2+2*S01_sila_materialu)])
cylinder (h = R01_vyska_preryti_statoru+(S01_prumer_vnitrni/2+2*S01_sila_materialu), r=S01_prumer_vnitrni/2+2*S01_sila_materialu, $fn=100);
 //odecet koule
 translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+2*S01_sila_materialu)*2, $fn=100);      
            
 }            
 difference()
        {       
 union()
            {
        //závit na ukotvení rotoru
                //zakladni material
                              
    cylinder (h = (S01_prumer_vnitrni/2+2*S01_sila_materialu)+R01_vyska_preryti_statoru, r=(lozisko_prumer_vnejsi/2-1), $fn=100);     
               
     vyztuhy();             
                }

 
   
translate([0,0,-5])
screw_thread((11-S01_tolerance_zavit),3,55,R01_vyska_preryti_statoru+10,PI/2,2);    
   }
   }
module vyztuhy()
{
    difference()
        {   

 translate([0,0,R01_vyska_preryti_statoru]) 
cylinder(h=(S01_prumer_vnitrni/2+3*S01_sila_materialu), r1=(lozisko_prumer_vnejsi/2-1), r2=(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu)-R01_vyska_preryti_statoru, center=false, $fn=100);  
 
            
 //vykousnutí 1           
            translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);  
  
//vykousnutí 2
 rotate([0, 0, 90])           
            translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);  
            
 //vykousnutí 3
 rotate([0, 0, 180])           
            translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);  
            
 //vykousnutí 4
 rotate([0, 0, 270])           
        translate([S01_sila_materialu/2,S01_sila_materialu/2,R01_vyska_preryti_statoru-0.005])
cube([(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(lozisko_prumer_vnejsi/2-1)+(S01_prumer_vnitrni/2+3*S01_sila_materialu),(S01_prumer_vnitrni/2+3*S01_sila_materialu)+0.01],center=false);               
 difference()
        {    
 translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+12*S01_sila_materialu)*2, $fn=100); 
            
            translate([0,0,R01_vyska_preryti_statoru])
sphere(d = (S01_prumer_vnitrni/2+3*S01_sila_materialu)*2, $fn=100); 

 }
 }    
 }  
 

 
module lopatka()
      { 
          difference()
        { 
 union()
        {
        
        translate([0,0,L01_prumer_lopatky/2])
         sphere(d = L01_prumer_lopatky, $fn=100);   
            
         translate([0,0,0])
            cube([L01_hrana_drzaku_a,L01_delka_uchytu+L01_prumer_lopatky/2+10,L01_hrana_drzaku_b],center=false);
         
       translate([0,0,0]) 
cylinder(h=(L01_prumer_lopatky/2), r1=L01_prumer_lopatky/3, r2=L01_prumer_lopatky/2, center=false, $fn=100);       
       
      } 
 translate([0,0,L01_prumer_lopatky/2])
         sphere(d = L01_prumer_lopatky-L01_sila_materialu_lopatky*2, $fn=100); 
  
      translate([-L01_prumer_lopatky+0.01,-L01_prumer_lopatky,0])
  cube([L01_prumer_lopatky+0.01,2*(L01_delka_uchytu+L01_prumer_lopatky/2+10),L01_prumer_lopatky],center=false);    
    
      
 } 
 }

//starý model 
/*
module WINDGAUGE02A_L01()
        
        union()
        {
        
        //prechod lopatka drzak
            difference()
        {
        translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/4,0])
            cube([L01_hrana_drzaku_a,(L01_prumer_lopatky/2)+5,L01_hrana_drzaku_b],center=true);
                sphere(d = L01_prumer_lopatky, $fn=100);
        }     
            
            difference()
        {
           //lopatka    
                sphere(d = L01_prumer_lopatky, $fn=100);
            
                sphere(d = L01_prumer_lopatky-2*L01_sila_materialu_lopatky, $fn=100);     
            
            
                translate([0,-L01_prumer_lopatky/2,-L01_prumer_lopatky/2])  
                    cube(size = L01_prumer_lopatky);
        }
        
        
         //uchyt_lopatky - tycka
        translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu/2,0])
            cube([L01_hrana_drzaku_a,L01_delka_uchytu,L01_hrana_drzaku_b],center=true);
       
       //uchyt_lopatky - tycka v rotoru
        translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu+L01_hloubka_zapusteni/2,0])
            cube([L01_hrana_drzaku_a,L01_hloubka_zapusteni,L01_hrana_drzaku_b],center=true);
        
        //uchyt_lopatky - v rotoru
        translate([-L01_hrana_drzaku_a/2,L01_prumer_lopatky/2+L01_delka_uchytu+L01_hloubka_zapusteni+L01_sila_zapusteni_drzaku/2,0])
            cube([L01_hrana_drzaku_a,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_b+2*L01_hloubka_zapusteni_drzaku],center=true);
        
      }   
       
 //  WINDGAUGE02A_L01(L01_hloubka_zapusteni,L01_hloubka_zapusteni_drzaku,L01_sila_zapusteni_drzaku,L01_hrana_drzaku_a,L01_hrana_drzaku_b,L01_tolerance_drzaku,L01_delka_uchytu,L01_prumer_lopatky,L01_sila_materialu_lopatky);