$fn=40; // model faces resolution.
include <../configuration.scad>


module WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu)
    {
        difference()
        {
            
   union()
         {   
                cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*S01_sila_materialu)/2, center = true, $fn=100);
         
             //tvorba prekryti statoru
             difference()
        {
           translate([0,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2])  
            
          cylinder (h = R01_vyska_preryti_statoru, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*R01_sila_materialu_pro_prekriti+2*S01_sila_materialu)/2, center = true, $fn=100);  
            
                    translate([0,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2]) 
       
       cylinder (h = R01_vyska_preryti_statoru+0.1, r=(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem+2*S01_sila_materialu)/2, center = true, $fn=100);       
            
         }    
             
         }  

//otvor pro lopatku 1
            rotate(a=[0,0,0]) 
            
           translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])  
                cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);
         
          rotate(a=[0,0,0]) 
               translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2+R01_sila_materialu_pro_prekriti,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2])  
                cube([3*R01_sila_materialu_pro_prekriti+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,R01_vyska_preryti_statoru+L01_tolerance_drzaku],true);
    
  
  //otvor pro lopatku 2
            rotate(a=[0,0,120]) 
            
           translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])  
                cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);          
         rotate(a=[0,0,120]) 
               translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2+R01_sila_materialu_pro_prekriti,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2])  
                cube([3*R01_sila_materialu_pro_prekriti+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,R01_vyska_preryti_statoru+L01_tolerance_drzaku],true);      

  
    //otvor pro lopatku 3
            rotate(a=[0,0,240]) 
            
           translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni)/2-L01_hloubka_zapusteni-L01_sila_zapusteni_drzaku/2,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)-L01_hloubka_zapusteni_drzaku/2])  
                cube([L01_sila_zapusteni_drzaku+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,L01_hloubka_zapusteni_drzaku],true);          
                
                 rotate(a=[0,0,240]) 
               translate([(R02_vzdalenost_mezi_uchyty_lopatek+2*L01_sila_zapusteni_drzaku+2*L01_hloubka_zapusteni+2*vule_mezi_statorem_rotorem)/2+R01_sila_materialu_pro_prekriti,0,((R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku)/2)+R01_vyska_preryti_statoru/2])  
                cube([3*R01_sila_materialu_pro_prekriti+L01_tolerance_drzaku,L01_hrana_drzaku_a+L01_tolerance_drzaku,R01_vyska_preryti_statoru+L01_tolerance_drzaku],true);
      //otvor na hřídelku          
   
  cylinder (h = R02_sila_mateiralu_pod_lopatkami+L01_hloubka_zapusteni_drzaku+0.1, r=prumer_osicky/2, center = true, $fn=100);
  
  
  
}  
}

//WINDGAUGE02A_R01(R02_sila_mateiralu_pod_lopatkami,L01_hloubka_zapusteni_drzaku,R02_vzdalenost_mezi_uchyty_lopatek,L01_sila_zapusteni_drzaku,L01_hloubka_zapusteni,prumer_pomocne_trubicky,zapusteni_pomocne_trubicky,vule_mezi_statorem_rotorem,R01_vyska_preryti_statoru,R01_sila_materialu_pro_prekriti,S01_sila_materialu);