Subversion Repositories svnkaklik

Rev

Rev 262 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log

Rev Author Line No. Line
262 kaklik 1
; Specify a file into which sidd will write messages.  
2
logfile ./sidd.log
3
 
4
; The input device and mixer
5
device /dev/dsp
6
mixer /dev/mixer
7
 
8
; Specify the mode of operation - stereo or mono.  In stereo mode,
9
; sidd will run two independent monitors, each with its own output file.
10
 
11
mode stereo
12
 
13
; The requested sample rate.  The software will use the closest
14
; setting available from the soundcard.
15
rate 48000
16
 
17
; Sample size, 8 or 16 bits.  16 bits is strongly recommended, 8 bit is
18
; provided in case your soundcard or driver doesn't do 16. 
19
 
20
bits 16
21
 
22
; Number of frequency bins to use.  The FFT size is 2*bins and the program
23
; will issue an output record every (2*bins)/rate seconds.
24
bins 2048
25
 
26
; Line input gains, left and right.  If using mono, set them both the same.
27
; Range is 0 to 100.  The logfile will report the actual values set, which 
28
; may differ a little.
348 kaklik 29
;gain line 77 100
262 kaklik 30
 
348 kaklik 31
gain mic 100 100
32
 
262 kaklik 33
; Overall input gains, comments as above.
348 kaklik 34
;gain overall 86 100
262 kaklik 35
 
36
; Overall record level, comments as above.
348 kaklik 37
;gain record 100 100
262 kaklik 38
 
39
; Specify a directory to contain daily data files.  Use '.' for the
40
; current directory.   Output files will be datadir/yymmdd.dat when running
41
; in mono, otherwise datadir/yymmdd.left.dat and datadir/yymmdd.right.dat
42
datadir .
43
 
44
; Enable real time scheduling of sidd.  Recommended so that soundcard buffers
45
; are read promptly, which means minimum latency before each fft buffer is
46
; timestamped. You have to be running as root for this to work.
47
sched high
48
 
49
; Specify the email address of whoever is to get any bad news.
50
; mail someone@someplace
51
 
52
; The loss-of-signal warning threshold and time delay.  If the input
53
; signal peak level (0-1.0) falls below the given threshold for more than
54
; the delay time, a warning will be issued.  The threshold applies to both
55
; left and right in stereo mode, on the assumption that you've set the gains
56
; so that the signal levels are about the same anyway.
57
los 0.06 5
58
 
59
; Specify a file into which spectrum data will regularly be written.  
60
; This file is overwritten with a fresh spectrum roughly every 
61
; 100 * 2 * bins/rate seconds.  The spectrum file contains three space
62
; separated columns: bin centre frequency (Hz) and the average power
63
; in the bin (relative), for the left and right channels.  In mono mode,
64
; there are just two columns
65
spectrum /tmp/sidspec 100
66
 
67
; Specify the channels to monitor.  The ident field is not actually used by
68
; sidd.
69
;
70
;   ident from   to
348 kaklik 71
band 18k3HWU 18200 18400 ; Le Blanc, France
72
band 19k6GBZ 19480 19680 ; Anthorn, UK
73
band 22k1GBZ 22050 22150 ; Skelton, UK 
74
band 20k3ICV 20190 20340 ; Tavolara, Italy
262 kaklik 75
band B1 20800 21000 ; Background channel
76
band B2 22650 22850 ; Background channel
77