Subversion Repositories svnkaklik

#include ".\camerus.h"

#define  CAMERA_ADR   0xC4

void main()

{

   setup_adc_ports(NO_ANALOGS);

   setup_adc(ADC_OFF);

   setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);

   setup_timer_1(T1_DISABLED);

   setup_timer_2(T2_DISABLED,0,1);

   output_high(PIN_C0);

   output_low(PIN_C6);

   Delay_ms(200);

   output_low(PIN_C0);

   Delay_ms(200);

   output_high(PIN_C0);

   i2c_start();      // Reset

   i2c_write(CAMERA_ADR);

   i2c_write(0x12);

   i2c_write(0x80 | 0x24);

   i2c_stop();

// **** Write data => Adr($13) = 0x05 ****

// This will tri-state the Y and UV busses on the OV6620, which

// will allow re-programming of the atmega8 to proceed at startup

// if needed.

   i2c_start();

   i2c_write(CAMERA_ADR);

   i2c_write(0x13);

   i2c_write(0x05);

   i2c_stop();

   Delay_ms(250);

//**** Write data => Adr($3F) = 0x42 ****

// This will turn on the external clock for the atmega8 to use.

   i2c_start();

   i2c_write(CAMERA_ADR);

   i2c_write(0x3F);

   i2c_write(0x42);

   i2c_stop();

// Wait for a short amount of time for the external clock

// to stabilize

   Delay_ms(250);

   output_low(PIN_C0);

// turn on the mega8 by releasing the reset line

   output_high(PIN_C6);

   while(true);

}