Rev Author Line No. Line
1045 jacho 1 #include "main.h"
2  
3 #define LCD_ENABLE_PIN PIN_E0 ////
4 #define LCD_RS_PIN PIN_E1 ////
5 #define LCD_RW_PIN PIN_E2 ////
6 #define LCD_DATA4 PIN_D4 ////
7 #define LCD_DATA5 PIN_D5 ////
8 #define LCD_DATA6 PIN_D6 ////
9 #define LCD_DATA7 PIN_D7
10 #include <lcd.c>
11  
12 #define ONE_WIRE_PIN PIN_C7
13 #use rs232(uart1, baud=9600)
14  
15 void main()
16 {
17  
18 setup_adc_ports(NO_ANALOGS|VSS_VDD);
19 setup_adc(ADC_CLOCK_DIV_2);
20 setup_spi(SPI_SS_DISABLED);
21 setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
22 setup_timer_1(T1_DISABLED);
23 setup_timer_2(T2_DISABLED,0,1);
24 setup_ccp1(CCP_OFF);
25 setup_comparator(NC_NC_NC_NC); // This device COMP currently not supported by the PICWizard
26 setup_oscillator(OSC_8MHZ);
27  
28  
29 printf("Simple Thermomether\r\n",);
30 printf("(c) Kaklik 2013\r\n");
31 printf("www.mlab.cz\r\n");
32  
33 lcd_init();
34 lcd_putc("(c) Kaklik 2013");
35 lcd_gotoxy(3,2);
36 lcd_putc("www.mlab.cz");
37 Delay_ms(2000);
38  
39 while (TRUE)
40 {
41  
42 }
43  
44 }