Problem with comparison.
| /Modules/CommSerial/I2CHUB02A/CAM_PROFI/bot.gpi |
|---|
| 0,0 → 1,52 |
| Generated by EAGLE CAM Processor 6.1.0 |
| Photoplotter Info File: D:/Honza/MLAB/Modules/CommSerial/I2CHUB02A/SCH_PCB/bot.gpi |
| Date : 25.3.2013 9:21:54 |
| Plotfile : D:/Honza/MLAB/Modules/CommSerial/I2CHUB02A/SCH_PCB/bot.gbr |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| Parameter settings: |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| Plotfile Info: |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| Apertures used: |
| Code Shape Size used |
| D10 rectangle 0.0118inch x 0.0472inch 24 |
| D11 square 0.0650inch 64 |
| D12 rectangle 0.0512inch x 0.0591inch 40 |
| D13 rectangle 0.0591inch x 0.0512inch 8 |
| D14 rectangle 0.0669inch x 0.0709inch 10 |
| D15 round 0.2540inch 4 |
| D16 rectangle 0.0551inch x 0.0709inch 32 |
| D17 rectangle 0.0480inch x 0.0880inch 3 |
| D18 rectangle 0.1417inch x 0.0866inch 1 |
| D19 rectangle 0.0984inch x 0.1004inch 2 |
| D20 rectangle 0.0500inch x 0.1000inch 2 |
| D21 draw 0.0100inch 4555 |
| D22 round 0.0317inch 8 |
| D23 draw 0.0240inch 33 |
| D24 draw 0.0160inch 67 |
| D25 round 0.0396inch 1 |