Problem with comparison.
/Modules/CommSerial/I2CHUB02B/CAM_PROFI/smb.gpi |
---|
0,0 → 1,46 |
Generated by EAGLE CAM Processor 6.5.0 |
Photoplotter Info File: D:/MLAB/Modules/CommSerial/I2CHUB02B/SCH_PCB/smb.gpi |
Date : 11.3.2015 19:24:03 |
Plotfile : D:/MLAB/Modules/CommSerial/I2CHUB02B/SCH_PCB/smb.gbr |
Apertures : generated: |
Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
Parameter settings: |
Emulate Apertures : no |
Tolerance Draw + : 0.00 % |
Tolerance Draw - : 0.00 % |
Tolerance Flash + : 0.00 % |
Tolerance Flash - : 0.00 % |
Rotate : no |
Mirror : no |
Optimize : yes |
Auto fit : yes |
OffsetX : 0inch |
OffsetY : 0inch |
Plotfile Info: |
Coordinate Format : 2.4 |
Coordinate Units : Inch |
Data Mode : Absolute |
Zero Suppression : None |
End Of Block : * |
Apertures used: |
Code Shape Size used |
D10 rectangle 0.0218inch x 0.0690inch 24 |
D11 square 0.0730inch 68 |
D12 rectangle 0.0592inch x 0.0671inch 32 |
D13 rectangle 0.0671inch x 0.0592inch 12 |
D14 rectangle 0.0749inch x 0.0789inch 10 |
D15 round 0.2620inch 4 |
D16 rectangle 0.0560inch x 0.0960inch 3 |
D17 rectangle 0.1497inch x 0.0946inch 1 |
D18 rectangle 0.1064inch x 0.1084inch 2 |
D19 rectangle 0.0580inch x 0.1080inch 2 |