| 0,0 → 1,47 |
|---|
| Generated by EAGLE CAM Processor 6.1.0 |
| |
| Photoplotter Info File: D:/Honza/MLAB_E/Modules/Drivers/SERVOHUB01A/CAM_PROFI/V2.gpi |
| |
| Date : 1.10.2012 14:56:42 |
| Plotfile : D:/Honza/MLAB_E/Modules/Drivers/SERVOHUB01A/CAM_PROFI/V2.PHO |
| Apertures : generated: |
| Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch |
| |
| Parameter settings: |
| |
| Emulate Apertures : no |
| Tolerance Draw + : 0.00 % |
| Tolerance Draw - : 0.00 % |
| Tolerance Flash + : 0.00 % |
| Tolerance Flash - : 0.00 % |
| Rotate : no |
| Mirror : no |
| Optimize : yes |
| Auto fit : yes |
| OffsetX : 0inch |
| OffsetY : 0inch |
| |
| Plotfile Info: |
| |
| Coordinate Format : 2.4 |
| Coordinate Units : Inch |
| Data Mode : Absolute |
| Zero Suppression : None |
| End Of Block : * |
| |
| Apertures used: |
| |
| Code Shape Size used |
| |
| D10 draw 0.0050inch 21 |
| D11 draw 0.0040inch 97 |
| D12 rectangle 0.0669inch x 0.0709inch 4 |
| D13 rectangle 0.0512inch x 0.0591inch 2 |
| D14 rectangle 0.1004inch x 0.0984inch 4 |
| D15 round 0.2540inch 4 |
| D16 square 0.0650inch 38 |
| D17 rectangle 0.0591inch x 0.0512inch 12 |
| D18 draw 0.0560inch 31 |
| D19 draw 0.0400inch 1067 |
| D20 draw 0.0500inch 24 |
| |