| /dokumenty/luxmetr/test_baterii/LUX0.TXT |
|---|
| 0,0 → 1,7 |
| $LUX0.1 0.845 40.451 26.090 |
| $LUX0.1 4.665 40.451 26.090 |
| $LUX0.1 7.917 40.690 26.090 |
| $LUX0.1 11.176 40.690 26.090 |
| $LUX0.1 14.444 40.690 26.090 |
| $LUX0.1 17.711 41.408 26.568 |
| $LUX0.1 21.087 41.408 26.808 |
| /dokumenty/luxmetr/test_baterii/LUX1.TXT |
|---|
| 0,0 → 1,22 |
| $LUX0.1 0.828 41.648 27.047 |
| $LUX0.1 4.642 41.648 26.329 |
| $LUX0.1 7.895 39.733 25.611 |
| $LUX0.1 11.155 39.493 25.611 |
| $LUX0.1 14.424 42.366 27.526 |
| $LUX0.1 17.690 39.254 25.611 |
| $LUX0.1 21.066 39.733 25.611 |
| $LUX0.1 24.328 39.733 25.371 |
| $LUX0.1 27.594 39.493 25.371 |
| $LUX0.1 30.868 38.775 24.893 |
| $LUX0.1 34.136 38.057 22.978 |
| $LUX0.1 37.400 38.775 26.808 |
| $LUX0.1 40.773 36.382 22.021 |
| $LUX0.1 44.038 33.988 21.781 |
| $LUX0.1 47.308 33.988 21.781 |
| $LUX0.1 50.576 34.467 22.021 |
| $LUX0.1 53.842 34.706 23.935 |
| $LUX0.1 57.211 42.844 27.047 |
| $LUX0.1 60.641 43.084 27.286 |
| $LUX0.1 63.909 45.238 28.722 |
| $LUX0.1 67.176 43.562 27.526 |
| $LUX0.1 70.440 42.605 27.047 |
| /dokumenty/luxmetr/test_baterii/LUX2.TXT |
|---|
| 0,0 → 1,7 |
| $LUX0.1 0.820 42.605 27.286 |
| $LUX0.1 4.478 42.605 27.286 |
| $LUX0.1 7.733 20.345 9.095 |
| $LUX0.1 10.988 37.579 23.696 |
| $LUX0.1 14.257 34.228 19.388 |
| $LUX0.1 17.520 39.254 25.371 |
| $LUX0.1 20.896 39.733 25.611 |
| /dokumenty/luxmetr/test_baterii/LUX3.TXT |
|---|
| 0,0 → 1,28 |
| $LUX0.1 0.833 34.706 23.457 |
| $LUX0.1 4.494 35.185 23.457 |
| $LUX0.1 7.749 35.185 23.457 |
| $LUX0.1 11.014 35.185 23.457 |
| $LUX0.1 14.284 35.185 23.457 |
| $LUX0.1 17.552 35.424 23.696 |
| $LUX0.1 20.932 35.664 23.935 |
| $LUX0.1 24.197 35.664 23.696 |
| $LUX0.1 27.466 35.424 23.696 |
| $LUX0.1 30.740 35.185 23.457 |
| $LUX0.1 34.009 35.185 23.457 |
| $LUX0.1 37.275 35.424 23.696 |
| $LUX0.1 40.653 35.424 23.696 |
| $LUX0.1 43.923 35.664 23.696 |
| $LUX0.1 47.196 35.664 23.935 |
| $LUX0.1 50.466 35.664 23.935 |
| $LUX0.1 53.731 35.664 23.935 |
| $LUX0.1 57.109 35.664 24.175 |
| $LUX0.1 60.540 35.903 24.175 |
| $LUX0.1 63.813 35.903 24.175 |
| $LUX0.1 67.086 31.834 21.302 |
| $LUX0.1 70.355 33.270 22.260 |
| $LUX0.1 73.624 33.031 22.260 |
| $LUX0.1 76.999 33.031 22.260 |
| $LUX0.1 80.271 33.031 22.260 |
| $LUX0.1 83.543 33.031 22.260 |
| $LUX0.1 86.814 33.270 22.260 |
| $LUX0.1 90.088 33.270 22.260 |
| /dokumenty/luxmetr/test_baterii/LUX4.TXT |
|---|
| 0,0 → 1,18 |
| $LUX0.1 0.836 16.755 11.250 |
| $LUX0.1 4.498 15.797 10.292 |
| $LUX0.1 7.753 13.404 8.377 |
| $LUX0.1 11.010 12.686 8.377 |
| $LUX0.1 14.271 13.164 8.617 |
| $LUX0.1 17.527 14.122 8.617 |
| $LUX0.1 20.896 14.601 10.532 |
| $LUX0.1 24.168 14.361 20.106 |
| $LUX0.1 27.438 37.579 25.611 |
| $LUX0.1 30.712 37.818 25.611 |
| $LUX0.1 33.978 37.818 25.611 |
| $LUX0.1 37.250 37.579 25.371 |
| $LUX0.1 40.629 37.579 25.371 |
| $LUX0.1 43.899 37.579 25.371 |
| $LUX0.1 47.174 37.579 25.371 |
| $LUX0.1 50.441 36.860 23.457 |
| $LUX0.1 53.710 36.621 24.653 |
| $LUX0.1 57.089 35.903 24 |
| /dokumenty/luxmetr/test_baterii/LUX5.TXT |
|---|
| 0,0 → 1,25 |
| $LUX0.1 0.841 44.520 28.483 |
| $LUX0.1 4.506 44.520 28.483 |
| $LUX0.1 7.761 44.998 28.722 |
| $LUX0.1 11.028 43.323 27.286 |
| $LUX0.1 14.300 44.280 28.483 |
| $LUX0.1 17.569 44.520 28.004 |
| $LUX0.1 20.953 42.366 27.765 |
| $LUX0.1 24.219 44.041 28.004 |
| $LUX0.1 27.490 39.493 24.893 |
| $LUX0.1 30.766 43.562 28.004 |
| $LUX0.1 34.035 42.844 27.765 |
| $LUX0.1 37.302 44.759 28.483 |
| $LUX0.1 40.681 44.759 28.483 |
| $LUX0.1 43.952 45.238 28.722 |
| $LUX0.1 47.225 44.998 28.722 |
| $LUX0.1 50.496 44.998 28.722 |
| $LUX0.1 53.761 44.998 28.722 |
| $LUX0.1 57.140 44.998 28.722 |
| $LUX0.1 60.566 44.998 28.722 |
| $LUX0.1 63.838 44.998 28.483 |
| $LUX0.1 67.108 44.998 28.483 |
| $LUX0.1 70.377 44.998 28.244 |
| $LUX0.1 73.645 44.759 28.483 |
| $LUX0.1 77.018 44.998 28.483 |
| $LUX0.1 80.288 44.759 28.244 |
| /dokumenty/luxmetr/test_baterii/LUX6.TXT |
|---|
| 0,0 → 1,83 |
| $LUX0.1 0.837 44.041 27.765 |
| $LUX0.1 4.497 43.802 27.526 |
| $LUX0.1 7.752 44.280 27.765 |
| $LUX0.1 11.017 44.280 27.765 |
| $LUX0.1 14.287 44.280 27.765 |
| $LUX0.1 17.555 44.041 27.526 |
| $LUX0.1 20.934 43.802 27.526 |
| $LUX0.1 24.199 44.041 27.765 |
| $LUX0.1 27.468 44.520 28.004 |
| $LUX0.1 30.742 44.041 27.765 |
| $LUX0.1 34.011 44.041 27.765 |
| $LUX0.1 37.277 43.802 27.526 |
| $LUX0.1 40.653 43.802 27.765 |
| $LUX0.1 43.923 43.802 28.004 |
| $LUX0.1 47.196 44.041 27.765 |
| $LUX0.1 50.466 44.759 28.244 |
| $LUX0.1 53.730 44.280 28.244 |
| $LUX0.1 57.107 44.280 28.244 |
| $LUX0.1 60.535 44.280 28.004 |
| $LUX0.1 63.809 44.041 28.244 |
| $LUX0.1 67.081 44.041 28.244 |
| $LUX0.1 70.350 44.041 28.244 |
| $LUX0.1 73.619 44.520 28.483 |
| $LUX0.1 76.993 44.759 28.722 |
| $LUX0.1 80.265 44.998 28.722 |
| $LUX0.1 83.537 44.998 28.722 |
| $LUX0.1 86.809 44.998 28.962 |
| $LUX0.1 90.083 45.238 28.962 |
| $LUX0.1 93.452 44.759 28.722 |
| $LUX0.1 96.722 44.998 28.722 |
| $LUX0.1 99.996 44.759 28.722 |
| $LUX0.1 103.268 44.998 28.722 |
| $LUX0.1 106.551 44.759 28.722 |
| $LUX0.1 109.829 44.998 28.722 |
| $LUX0.1 113.212 44.998 28.962 |
| $LUX0.1 116.652 44.998 28.483 |
| $LUX0.1 119.925 45.238 28.722 |
| $LUX0.1 123.208 44.998 28.962 |
| $LUX0.1 126.489 44.998 28.722 |
| $LUX0.1 129.875 44.759 28.483 |
| $LUX0.1 133.158 44.759 28.244 |
| $LUX0.1 136.436 44.520 28.244 |
| $LUX0.1 139.715 44.280 28.004 |
| $LUX0.1 142.999 44.280 28.004 |
| $LUX0.1 146.383 44.280 27.765 |
| $LUX0.1 149.660 44.041 27.765 |
| $LUX0.1 152.939 44.280 27.765 |
| $LUX0.1 156.219 44.041 27.765 |
| $LUX0.1 159.503 44.280 27.765 |
| $LUX0.1 162.782 44.041 27.526 |
| $LUX0.1 166.171 44.041 27.765 |
| $LUX0.1 169.604 44.041 27.765 |
| $LUX0.1 172.883 44.280 28.004 |
| $LUX0.1 176.167 44.520 28.004 |
| $LUX0.1 179.442 44.041 28.004 |
| $LUX0.1 182.831 44.280 28.244 |
| $LUX0.1 186.112 44.520 28.244 |
| $LUX0.1 189.389 44.520 28.244 |
| $LUX0.1 192.674 44.520 28.244 |
| $LUX0.1 195.954 44.520 28.244 |
| $LUX0.1 199.342 44.520 28.244 |
| $LUX0.1 202.622 44.520 28.244 |
| $LUX0.1 205.900 44.280 28.244 |
| $LUX0.1 209.185 44.041 28.244 |
| $LUX0.1 212.459 43.802 28.004 |
| $LUX0.1 215.848 44.041 28.244 |
| $LUX0.1 219.128 44.280 28.483 |
| $LUX0.1 222.407 44.280 28.483 |
| $LUX0.1 225.852 44.280 28.483 |
| $LUX0.1 229.130 44.280 28.483 |
| $LUX0.1 232.411 44.280 28.483 |
| $LUX0.1 235.799 43.802 28.244 |
| $LUX0.1 239.078 44.041 28.244 |
| $LUX0.1 242.363 44.280 28.483 |
| $LUX0.1 245.636 44.280 28.483 |
| $LUX0.1 248.913 44.998 28.722 |
| $LUX0.1 252.302 44.280 28.004 |
| $LUX0.1 255.580 43.562 28.004 |
| $LUX0.1 258.861 43.323 28.004 |
| $LUX0.1 262.138 43.802 28.722 |
| $LUX0.1 265.415 44.041 28.483 |
| $LUX0.1 268.803 44.280 28.483 |
| $LUX0.1 272.080 44.041 28.004 |
| /dokumenty/skolni/BP/LASERy/NewFile0.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile0.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 2.00mV/ -110mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 1.000us/ 0.000000s |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 108mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile0.wfm |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile1.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile1.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 10.0mV/ -43.2mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 1.000us/ 1.200000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 52.0mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile10.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile11.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile11.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 50.0mV/ -156mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 1.000us/ 0.000000s |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Normal DC 208mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile12.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile12.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 50.0mV/ -156mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 1.000us/ 0.000000s |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Normal DC 208mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile2.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile2.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 10.0mV/ -43.2mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 1.000us/ 2.640000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 45.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile3.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile3.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 20.0mV/ -63.2mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 10.00us/ 2.640000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 45.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 25.00MSa |
| /dokumenty/skolni/BP/LASERy/NewFile4.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile4.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 19.4mV/ -77.6mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 2.000us/ 7.440000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 45.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 50.00MSa |
| /dokumenty/skolni/BP/LASERy/NewFile5.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile5.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 50.0mV/ -140mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 2.000us/ 5.840000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 45.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile6.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile6.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 50.0mV/ -140mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 2.000us/ 5.840000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 45.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile7.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile7.txt |
|---|
| 0,0 → 1,15 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 50.0mV/ -96.0mV DC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| Time Time Ref Main Scale Delay |
| Main Center 2.000us/ 640.0000ns |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 45.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile8.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile8.txt |
|---|
| 0,0 → 1,17 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 20.0mV/ -68.0mV DC Off Off |
| CH2 On 20.0mV/ 4.80mV AC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| CH2 1M Ohm 10X |
| Time Time Ref Main Scale Delay |
| Main Center 2.000us/ -1.520000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 16.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/BP/LASERy/NewFile9.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /dokumenty/skolni/BP/LASERy/NewFile9.txt |
|---|
| 0,0 → 1,17 |
| Analog Ch State Scale Position Coupling BW Limit Invert |
| CH1 On 20.0mV/ -68.0mV DC Off Off |
| CH2 On 20.0mV/ 4.80mV AC Off Off |
| Analog Ch Impedance Probe |
| CH1 1M Ohm 1X |
| CH2 1M Ohm 10X |
| Time Time Ref Main Scale Delay |
| Main Center 2.000us/ -1.520000us |
| Trigger Source Slope Mode Coupling Level Holdoff |
| Edge CH1 Rising Auto DC 16.2mV 500ns |
| Acquisition Sampling Memory Depth Sample Rate |
| Normal Realtime Normal 100.0MSa |
| /dokumenty/skolni/PRA2/hysterezni_smycka/HystSmycka_2012v2.pdf |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
