| /programy/C/avr/tests/ATmega128/Makefile |
|---|
| 0,0 → 1,61 |
| # makefile, written by guido socher |
| MCU=atmega128 |
| CC=avr-gcc |
| OBJCOPY=avr-objcopy |
| # optimize for size: |
| CFLAGS=-g -mmcu=$(MCU) -Wall -Wstrict-prototypes -Os -mcall-prologues |
| #------------------- |
| all: blik.hex |
| #------------------- |
| help: |
| @echo "Usage: make all|load|load_pre|rdfuses|wrfuse1mhz|wrfuse4mhz|wrfusecrystal" |
| @echo "Warning: you will not be able to undo wrfusecrystal unless you connect an" |
| @echo " external crystal! uC is dead after wrfusecrystal if you do not" |
| @echo " have an external crystal." |
| #------------------- |
| blik.hex : blik.out |
| $(OBJCOPY) -R .eeprom -O ihex blik.out blik.hex |
| blik.out : blik.o |
| $(CC) $(CFLAGS) -o blik.out -Wl,-Map,blik.map blik.o |
| blik.o : blik.c |
| $(CC) $(CFLAGS) -Os -c blik.c |
| #------------------ |
| load: $(FILE).hex |
| ./prg_load_uc $(FILE).hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_pre: $(FILE).hex |
| ./prg_load_uc $(FILE)_pre.hex |
| # |
| loaduisp: $(FILE).hex |
| ./prg_load_uc -u $(FILE).hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_preuisp: $(FILE)_pre.hex |
| ./prg_load_uc -u avrm8ledtest.hex |
| #------------------- |
| # fuse byte settings: |
| # Atmel AVR ATmega8 |
| # Fuse Low Byte = 0xe1 (1MHz internal), 0xe3 (4MHz internal), 0xe4 (8MHz internal) |
| # Fuse High Byte = 0xd9 |
| # Factory default is 0xe1 for low byte and 0xd9 for high byte |
| # Check this with make rdfuses |
| rdfuses: |
| ./prg_fusebit_uc -r |
| # use internal RC oscillator 1 Mhz |
| wrfuse1mhz: |
| ./prg_fusebit_uc -w 1 |
| # use internal RC oscillator 4 Mhz |
| wrfuse4mhz: |
| ./prg_fusebit_uc -w 4 |
| # use external 3-8 Mhz crystal |
| # Warning: you can not reset this to intenal unless you connect a crystal!! |
| wrfusecrystal: |
| @echo "Warning: The external crystal setting can not be changed back without a working crystal" |
| @echo " You have 3 seconds to abort this with crtl-c" |
| @sleep 3 |
| ./prg_fusebit_uc -w 0 |
| #------------------- |
| clean: |
| rm -f *.o *.map *.out *.hex |
| #------------------- |
| /programy/C/avr/tests/ATmega128/blik.c |
|---|
| 0,0 → 1,48 |
| /********************************************* |
| * vim: set sw=8 ts=8 si : |
| * Author: Guido Socher, Copyright: GPL |
| * This program is to test the led connected to |
| * PC5. |
| * See http://linuxfocus.org/English/November2004/ |
| * for details. |
| * Chip type : ATMEGA644 |
| * Clock frequency : Internal clock 1 Mhz (factory default) |
| *********************************************/ |
| #include <avr/io.h> |
| #include <inttypes.h> |
| #define F_CPU 8000000UL // 8 MHz |
| #include <util/delay.h> |
| + |
| +void cekej(int ms) |
| +{ |
| + |
| + // we use a calibrated macro. This is more |
| + // accurate and not so much compiler dependent |
| + // as self made code. |
| + while (ms) |
| + { |
| + _delay_ms(0.96); |
| + ms--; |
| + } |
| +} |
| + |
| +int main(void) |
| +{ |
| + /* INITIALIZE */ |
| + /* enable PC5 as output */ |
| + DDRC|= (1<<LED); |
| + |
| + /* PC5 is 5 (see file include/avr/iom8.h) and 1<<PC5 is 00100000 |
| + * This can also be written as _BV(PC5)*/ |
| + while (1) { |
| + /* led on, pin=0 */ |
| + PORTC|= (1<<LED); |
| + cekej(100); |
| + /* set output to 5V, LED off */ |
| + PORTC &= ~(1<<LED); |
| + cekej(1000); |
| + } |
| + return(0); |
| +} |
| /programy/C/avr/tests/ATmega128/blik.hex |
|---|
| 0,0 → 1,18 |
| :100000000C9446000C9465000C9465000C946500FB |
| :100010000C9465000C9465000C9465000C946500CC |
| :100020000C9465000C9465000C9465000C946500BC |
| :100030000C9465000C9465000C9465000C946500AC |
| :100040000C9465000C9465000C9465000C9465009C |
| :100050000C9465000C9465000C9465000C9465008C |
| :100060000C9465000C9465000C9465000C9465007C |
| :100070000C9465000C9465000C9465000C9465006C |
| :100080000C9465000C9465000C94650011241FBE4F |
| :10009000CFEFD0E1DEBFCDBF11E0A0E0B1E0E8E0FE |
| :1000A000F1E000E00BBF02C007900D92A030B10755 |
| :1000B000D9F711E0A0E0B1E001C01D92A030B10776 |
| :1000C000E1F70E9473000C9483000C9400009C01E3 |
| :1000D00006C080E897E00197F1F7215030402115E4 |
| :1000E0003105B9F70895CFEFD0E1DEBFCDBFA59AB6 |
| :1000F000AD9A84E690E00E946700AD9888EE93E0A8 |
| :080100000E946700F5CFFFCF5C |
| :00000001FF |
| /programy/C/avr/tests/ATmega128/blik.map |
|---|
| 0,0 → 1,361 |
| Archive member included because of file (symbol) |
| /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o (exit) |
| /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| blik.o (__do_clear_bss) |
| Memory Configuration |
| Name Origin Length Attributes |
| text 0x00000000 0x00020000 xr |
| data 0x00800060 0x0000ffa0 rw !x |
| eeprom 0x00810000 0x00010000 rw !x |
| fuse 0x00820000 0x00000400 rw !x |
| lock 0x00830000 0x00000400 rw !x |
| signature 0x00840000 0x00000400 rw !x |
| *default* 0x00000000 0xffffffff |
| Linker script and memory map |
| Address of section .data set to 0x800100 |
| LOAD /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| LOAD blik.o |
| LOAD /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a |
| LOAD /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/libc.a |
| LOAD /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a |
| .hash |
| *(.hash) |
| .dynsym |
| *(.dynsym) |
| .dynstr |
| *(.dynstr) |
| .gnu.version |
| *(.gnu.version) |
| .gnu.version_d |
| *(.gnu.version_d) |
| .gnu.version_r |
| *(.gnu.version_r) |
| .rel.init |
| *(.rel.init) |
| .rela.init |
| *(.rela.init) |
| .rel.text |
| *(.rel.text) |
| *(.rel.text.*) |
| *(.rel.gnu.linkonce.t*) |
| .rela.text |
| *(.rela.text) |
| *(.rela.text.*) |
| *(.rela.gnu.linkonce.t*) |
| .rel.fini |
| *(.rel.fini) |
| .rela.fini |
| *(.rela.fini) |
| .rel.rodata |
| *(.rel.rodata) |
| *(.rel.rodata.*) |
| *(.rel.gnu.linkonce.r*) |
| .rela.rodata |
| *(.rela.rodata) |
| *(.rela.rodata.*) |
| *(.rela.gnu.linkonce.r*) |
| .rel.data |
| *(.rel.data) |
| *(.rel.data.*) |
| *(.rel.gnu.linkonce.d*) |
| .rela.data |
| *(.rela.data) |
| *(.rela.data.*) |
| *(.rela.gnu.linkonce.d*) |
| .rel.ctors |
| *(.rel.ctors) |
| .rela.ctors |
| *(.rela.ctors) |
| .rel.dtors |
| *(.rel.dtors) |
| .rela.dtors |
| *(.rela.dtors) |
| .rel.got |
| *(.rel.got) |
| .rela.got |
| *(.rela.got) |
| .rel.bss |
| *(.rel.bss) |
| .rela.bss |
| *(.rela.bss) |
| .rel.plt |
| *(.rel.plt) |
| .rela.plt |
| *(.rela.plt) |
| .text 0x00000000 0x108 |
| *(.vectors) |
| .vectors 0x00000000 0x8c /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| 0x00000000 __vectors |
| 0x00000000 __vector_default |
| *(.vectors) |
| *(.progmem.gcc*) |
| *(.progmem*) |
| 0x0000008c . = ALIGN (0x2) |
| 0x0000008c __trampolines_start = . |
| *(.trampolines) |
| .trampolines 0x0000008c 0x0 linker stubs |
| *(.trampolines*) |
| 0x0000008c __trampolines_end = . |
| *(.jumptables) |
| *(.jumptables*) |
| *(.lowtext) |
| *(.lowtext*) |
| 0x0000008c __ctors_start = . |
| *(.ctors) |
| 0x0000008c __ctors_end = . |
| 0x0000008c __dtors_start = . |
| *(.dtors) |
| 0x0000008c __dtors_end = . |
| SORT(*)(.ctors) |
| SORT(*)(.dtors) |
| *(.init0) |
| .init0 0x0000008c 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| 0x0000008c __init |
| *(.init0) |
| *(.init1) |
| *(.init1) |
| *(.init2) |
| .init2 0x0000008c 0xc /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| *(.init2) |
| *(.init3) |
| *(.init3) |
| *(.init4) |
| .init4 0x00000098 0x1a /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| 0x00000098 __do_copy_data |
| .init4 0x000000b2 0x10 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| 0x000000b2 __do_clear_bss |
| *(.init4) |
| *(.init5) |
| *(.init5) |
| *(.init6) |
| *(.init6) |
| *(.init7) |
| *(.init7) |
| *(.init8) |
| *(.init8) |
| *(.init9) |
| .init9 0x000000c2 0x8 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| *(.init9) |
| *(.text) |
| .text 0x000000ca 0x4 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| 0x000000ca __vector_22 |
| 0x000000ca __vector_28 |
| 0x000000ca __vector_1 |
| 0x000000ca __vector_32 |
| 0x000000ca __vector_34 |
| 0x000000ca __vector_24 |
| 0x000000ca __vector_12 |
| 0x000000ca __bad_interrupt |
| 0x000000ca __vector_6 |
| 0x000000ca __vector_31 |
| 0x000000ca __vector_3 |
| 0x000000ca __vector_23 |
| 0x000000ca __vector_30 |
| 0x000000ca __vector_25 |
| 0x000000ca __vector_11 |
| 0x000000ca __vector_13 |
| 0x000000ca __vector_17 |
| 0x000000ca __vector_19 |
| 0x000000ca __vector_7 |
| 0x000000ca __vector_27 |
| 0x000000ca __vector_5 |
| 0x000000ca __vector_33 |
| 0x000000ca __vector_4 |
| 0x000000ca __vector_9 |
| 0x000000ca __vector_2 |
| 0x000000ca __vector_21 |
| 0x000000ca __vector_15 |
| 0x000000ca __vector_29 |
| 0x000000ca __vector_8 |
| 0x000000ca __vector_26 |
| 0x000000ca __vector_14 |
| 0x000000ca __vector_10 |
| 0x000000ca __vector_16 |
| 0x000000ca __vector_18 |
| 0x000000ca __vector_20 |
| .text 0x000000ce 0x38 blik.o |
| 0x000000e6 main |
| 0x000000ce cekej |
| .text 0x00000106 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .text 0x00000106 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| 0x00000106 . = ALIGN (0x2) |
| *(.text.*) |
| .text.libgcc 0x00000106 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .text.libgcc 0x00000106 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| 0x00000106 . = ALIGN (0x2) |
| *(.fini9) |
| .fini9 0x00000106 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| 0x00000106 exit |
| 0x00000106 _exit |
| *(.fini9) |
| *(.fini8) |
| *(.fini8) |
| *(.fini7) |
| *(.fini7) |
| *(.fini6) |
| *(.fini6) |
| *(.fini5) |
| *(.fini5) |
| *(.fini4) |
| *(.fini4) |
| *(.fini3) |
| *(.fini3) |
| *(.fini2) |
| *(.fini2) |
| *(.fini1) |
| *(.fini1) |
| *(.fini0) |
| .fini0 0x00000106 0x2 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| *(.fini0) |
| 0x00000108 _etext = . |
| .data 0x00800100 0x0 load address 0x00000108 |
| 0x00800100 PROVIDE (__data_start, .) |
| *(.data) |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| .data 0x00800100 0x0 blik.o |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| *(.data*) |
| *(.rodata) |
| *(.rodata*) |
| *(.gnu.linkonce.d*) |
| 0x00800100 . = ALIGN (0x2) |
| 0x00800100 _edata = . |
| 0x00800100 PROVIDE (__data_end, .) |
| .bss 0x00800100 0x0 load address 0x00000108 |
| 0x00800100 PROVIDE (__bss_start, .) |
| *(.bss) |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| .bss 0x00800100 0x0 blik.o |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| *(.bss*) |
| *(COMMON) |
| 0x00800100 PROVIDE (__bss_end, .) |
| 0x00000108 __data_load_start = LOADADDR (.data) |
| 0x00000108 __data_load_end = (__data_load_start + SIZEOF (.data)) |
| .noinit 0x00800100 0x0 |
| 0x00800100 PROVIDE (__noinit_start, .) |
| *(.noinit*) |
| 0x00800100 PROVIDE (__noinit_end, .) |
| 0x00800100 _end = . |
| 0x00800100 PROVIDE (__heap_start, .) |
| .eeprom 0x00810000 0x0 |
| *(.eeprom*) |
| 0x00810000 __eeprom_end = . |
| .fuse |
| *(.fuse) |
| *(.lfuse) |
| *(.hfuse) |
| *(.efuse) |
| .lock |
| *(.lock*) |
| .signature |
| *(.signature*) |
| .stab 0x00000000 0x804 |
| *(.stab) |
| .stab 0x00000000 0x414 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| .stab 0x00000414 0x3f0 blik.o |
| 0x3fc (size before relaxing) |
| .stabstr 0x00000000 0x7ef |
| *(.stabstr) |
| .stabstr 0x00000000 0x7ef /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm128.o |
| .stab.excl |
| *(.stab.excl) |
| .stab.exclstr |
| *(.stab.exclstr) |
| .stab.index |
| *(.stab.index) |
| .stab.indexstr |
| *(.stab.indexstr) |
| .comment |
| *(.comment) |
| .debug |
| *(.debug) |
| .line |
| *(.line) |
| .debug_srcinfo |
| *(.debug_srcinfo) |
| .debug_sfnames |
| *(.debug_sfnames) |
| .debug_aranges |
| *(.debug_aranges) |
| .debug_pubnames |
| *(.debug_pubnames) |
| .debug_info |
| *(.debug_info) |
| *(.gnu.linkonce.wi.*) |
| .debug_abbrev |
| *(.debug_abbrev) |
| .debug_line |
| *(.debug_line) |
| .debug_frame |
| *(.debug_frame) |
| .debug_str |
| *(.debug_str) |
| .debug_loc |
| *(.debug_loc) |
| .debug_macinfo |
| *(.debug_macinfo) |
| OUTPUT(blik.out elf32-avr) |
| LOAD linker stubs |
| /programy/C/avr/tests/ATmega128/blik.out |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /programy/C/avr/tests/ATmega168/Makefile |
|---|
| 0,0 → 1,61 |
| # makefile, written by guido socher |
| MCU=atmega168 |
| CC=avr-gcc |
| OBJCOPY=avr-objcopy |
| # optimize for size: |
| CFLAGS=-g -mmcu=$(MCU) -Wall -Wstrict-prototypes -Os -mcall-prologues |
| #------------------- |
| all: blik.hex |
| #------------------- |
| help: |
| @echo "Usage: make all|load|load_pre|rdfuses|wrfuse1mhz|wrfuse4mhz|wrfusecrystal" |
| @echo "Warning: you will not be able to undo wrfusecrystal unless you connect an" |
| @echo " external crystal! uC is dead after wrfusecrystal if you do not" |
| @echo " have an external crystal." |
| #------------------- |
| blik.hex : blik.out |
| $(OBJCOPY) -R .eeprom -O ihex blik.out blik.hex |
| blik.out : blik.o |
| $(CC) $(CFLAGS) -o blik.out -Wl,-Map,blik.map blik.o |
| blik.o : blik.c |
| $(CC) $(CFLAGS) -Os -c blik.c |
| #------------------ |
| load: $(FILE).hex |
| ./prg_load_uc $(FILE).hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_pre: $(FILE).hex |
| ./prg_load_uc $(FILE)_pre.hex |
| # |
| loaduisp: $(FILE).hex |
| ./prg_load_uc -u $(FILE).hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_preuisp: $(FILE)_pre.hex |
| ./prg_load_uc -u avrm8ledtest.hex |
| #------------------- |
| # fuse byte settings: |
| # Atmel AVR ATmega8 |
| # Fuse Low Byte = 0xe1 (1MHz internal), 0xe3 (4MHz internal), 0xe4 (8MHz internal) |
| # Fuse High Byte = 0xd9 |
| # Factory default is 0xe1 for low byte and 0xd9 for high byte |
| # Check this with make rdfuses |
| rdfuses: |
| ./prg_fusebit_uc -r |
| # use internal RC oscillator 1 Mhz |
| wrfuse1mhz: |
| ./prg_fusebit_uc -w 1 |
| # use internal RC oscillator 4 Mhz |
| wrfuse4mhz: |
| ./prg_fusebit_uc -w 4 |
| # use external 3-8 Mhz crystal |
| # Warning: you can not reset this to intenal unless you connect a crystal!! |
| wrfusecrystal: |
| @echo "Warning: The external crystal setting can not be changed back without a working crystal" |
| @echo " You have 3 seconds to abort this with crtl-c" |
| @sleep 3 |
| ./prg_fusebit_uc -w 0 |
| #------------------- |
| clean: |
| rm -f *.o *.map *.out *.hex |
| #------------------- |
| /programy/C/avr/tests/ATmega168/blik.c |
|---|
| 0,0 → 1,48 |
| /********************************************* |
| * vim: set sw=8 ts=8 si : |
| * Author: Guido Socher, Copyright: GPL |
| * This program is to test the led connected to |
| * PC5. |
| * See http://linuxfocus.org/English/November2004/ |
| * for details. |
| * Chip type : ATMEGA644 |
| * Clock frequency : Internal clock 1 Mhz (factory default) |
| *********************************************/ |
| #include <avr/io.h> |
| #include <inttypes.h> |
| #define F_CPU 16000000UL // 8 MHz |
| #include <util/delay.h> |
| + |
| +void cekej(int ms) |
| +{ |
| + |
| + // we use a calibrated macro. This is more |
| + // accurate and not so much compiler dependent |
| + // as self made code. |
| + while (ms) |
| + { |
| + _delay_ms(0.96); |
| + ms--; |
| + } |
| +} |
| + |
| +int main(void) |
| +{ |
| + /* INITIALIZE */ |
| + /* enable PC5 as output */ |
| + DDRC|= (1<<LED); |
| + |
| + /* PC5 is 5 (see file include/avr/iom8.h) and 1<<PC5 is 00100000 |
| + * This can also be written as _BV(PC5)*/ |
| + while (1) { |
| + /* led on, pin=0 */ |
| + PORTC|= (1<<LED); |
| + cekej(1000); |
| + /* set output to 5V, LED off */ |
| + PORTC &= ~(1<<LED); |
| + cekej(100); |
| + } |
| + return(0); |
| +} |
| /programy/C/avr/tests/ATmega168/blik.hex |
|---|
| 0,0 → 1,15 |
| :100000000C9434000C9451000C9451000C94510049 |
| :100010000C9451000C9451000C9451000C9451001C |
| :100020000C9451000C9451000C9451000C9451000C |
| :100030000C9451000C9451000C9451000C945100FC |
| :100040000C9451000C9451000C9451000C945100EC |
| :100050000C9451000C9451000C9451000C945100DC |
| :100060000C9451000C94510011241FBECFEFD4E02A |
| :10007000DEBFCDBF11E0A0E0B1E0E0EEF0E002C0F5 |
| :1000800005900D92A030B107D9F711E0A0E0B1E0E2 |
| :1000900001C01D92A030B107E1F70E945F000C94EF |
| :1000A0006F000C9400009C0106C080E09FE0019767 |
| :1000B000F1F72150304021153105B9F70895CFEF00 |
| :1000C000D4E0DEBFCDBF3D9A459A88EE93E00E9412 |
| :1000D0005300459884E690E00E945300F5CFFFCF8F |
| :00000001FF |
| /programy/C/avr/tests/ATmega168/blik.map |
|---|
| 0,0 → 1,358 |
| Archive member included because of file (symbol) |
| /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o (exit) |
| /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_copy_data.o) |
| blik.o (__do_copy_data) |
| /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| blik.o (__do_clear_bss) |
| Memory Configuration |
| Name Origin Length Attributes |
| text 0x00000000 0x00020000 xr |
| data 0x00800060 0x0000ffa0 rw !x |
| eeprom 0x00810000 0x00010000 rw !x |
| fuse 0x00820000 0x00000400 rw !x |
| lock 0x00830000 0x00000400 rw !x |
| signature 0x00840000 0x00000400 rw !x |
| *default* 0x00000000 0xffffffff |
| Linker script and memory map |
| Address of section .data set to 0x800100 |
| LOAD /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| LOAD blik.o |
| LOAD /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a |
| LOAD /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/libc.a |
| LOAD /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a |
| .hash |
| *(.hash) |
| .dynsym |
| *(.dynsym) |
| .dynstr |
| *(.dynstr) |
| .gnu.version |
| *(.gnu.version) |
| .gnu.version_d |
| *(.gnu.version_d) |
| .gnu.version_r |
| *(.gnu.version_r) |
| .rel.init |
| *(.rel.init) |
| .rela.init |
| *(.rela.init) |
| .rel.text |
| *(.rel.text) |
| *(.rel.text.*) |
| *(.rel.gnu.linkonce.t*) |
| .rela.text |
| *(.rela.text) |
| *(.rela.text.*) |
| *(.rela.gnu.linkonce.t*) |
| .rel.fini |
| *(.rel.fini) |
| .rela.fini |
| *(.rela.fini) |
| .rel.rodata |
| *(.rel.rodata) |
| *(.rel.rodata.*) |
| *(.rel.gnu.linkonce.r*) |
| .rela.rodata |
| *(.rela.rodata) |
| *(.rela.rodata.*) |
| *(.rela.gnu.linkonce.r*) |
| .rel.data |
| *(.rel.data) |
| *(.rel.data.*) |
| *(.rel.gnu.linkonce.d*) |
| .rela.data |
| *(.rela.data) |
| *(.rela.data.*) |
| *(.rela.gnu.linkonce.d*) |
| .rel.ctors |
| *(.rel.ctors) |
| .rela.ctors |
| *(.rela.ctors) |
| .rel.dtors |
| *(.rel.dtors) |
| .rela.dtors |
| *(.rela.dtors) |
| .rel.got |
| *(.rel.got) |
| .rela.got |
| *(.rela.got) |
| .rel.bss |
| *(.rel.bss) |
| .rela.bss |
| *(.rela.bss) |
| .rel.plt |
| *(.rel.plt) |
| .rela.plt |
| *(.rela.plt) |
| .text 0x00000000 0xe0 |
| *(.vectors) |
| .vectors 0x00000000 0x68 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| 0x00000000 __vectors |
| 0x00000000 __vector_default |
| *(.vectors) |
| *(.progmem.gcc*) |
| *(.progmem*) |
| 0x00000068 . = ALIGN (0x2) |
| 0x00000068 __trampolines_start = . |
| *(.trampolines) |
| .trampolines 0x00000068 0x0 linker stubs |
| *(.trampolines*) |
| 0x00000068 __trampolines_end = . |
| *(.jumptables) |
| *(.jumptables*) |
| *(.lowtext) |
| *(.lowtext*) |
| 0x00000068 __ctors_start = . |
| *(.ctors) |
| 0x00000068 __ctors_end = . |
| 0x00000068 __dtors_start = . |
| *(.dtors) |
| 0x00000068 __dtors_end = . |
| SORT(*)(.ctors) |
| SORT(*)(.dtors) |
| *(.init0) |
| .init0 0x00000068 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| 0x00000068 __init |
| *(.init0) |
| *(.init1) |
| *(.init1) |
| *(.init2) |
| .init2 0x00000068 0xc /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| *(.init2) |
| *(.init3) |
| *(.init3) |
| *(.init4) |
| .init4 0x00000074 0x16 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_copy_data.o) |
| 0x00000074 __do_copy_data |
| .init4 0x0000008a 0x10 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| 0x0000008a __do_clear_bss |
| *(.init4) |
| *(.init5) |
| *(.init5) |
| *(.init6) |
| *(.init6) |
| *(.init7) |
| *(.init7) |
| *(.init8) |
| *(.init8) |
| *(.init9) |
| .init9 0x0000009a 0x8 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| *(.init9) |
| *(.text) |
| .text 0x000000a2 0x4 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| 0x000000a2 __vector_22 |
| 0x000000a2 __vector_1 |
| 0x000000a2 __vector_24 |
| 0x000000a2 __vector_12 |
| 0x000000a2 __bad_interrupt |
| 0x000000a2 __vector_6 |
| 0x000000a2 __vector_3 |
| 0x000000a2 __vector_23 |
| 0x000000a2 __vector_25 |
| 0x000000a2 __vector_11 |
| 0x000000a2 __vector_13 |
| 0x000000a2 __vector_17 |
| 0x000000a2 __vector_19 |
| 0x000000a2 __vector_7 |
| 0x000000a2 __vector_5 |
| 0x000000a2 __vector_4 |
| 0x000000a2 __vector_9 |
| 0x000000a2 __vector_2 |
| 0x000000a2 __vector_21 |
| 0x000000a2 __vector_15 |
| 0x000000a2 __vector_8 |
| 0x000000a2 __vector_14 |
| 0x000000a2 __vector_10 |
| 0x000000a2 __vector_16 |
| 0x000000a2 __vector_18 |
| 0x000000a2 __vector_20 |
| .text 0x000000a6 0x38 blik.o |
| 0x000000be main |
| 0x000000a6 cekej |
| .text 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .text 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_copy_data.o) |
| .text 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| 0x000000de . = ALIGN (0x2) |
| *(.text.*) |
| .text.libgcc 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .text.libgcc 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_copy_data.o) |
| .text.libgcc 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| 0x000000de . = ALIGN (0x2) |
| *(.fini9) |
| .fini9 0x000000de 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| 0x000000de exit |
| 0x000000de _exit |
| *(.fini9) |
| *(.fini8) |
| *(.fini8) |
| *(.fini7) |
| *(.fini7) |
| *(.fini6) |
| *(.fini6) |
| *(.fini5) |
| *(.fini5) |
| *(.fini4) |
| *(.fini4) |
| *(.fini3) |
| *(.fini3) |
| *(.fini2) |
| *(.fini2) |
| *(.fini1) |
| *(.fini1) |
| *(.fini0) |
| .fini0 0x000000de 0x2 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| *(.fini0) |
| 0x000000e0 _etext = . |
| .data 0x00800100 0x0 load address 0x000000e0 |
| 0x00800100 PROVIDE (__data_start, .) |
| *(.data) |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| .data 0x00800100 0x0 blik.o |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_copy_data.o) |
| .data 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| *(.data*) |
| *(.rodata) |
| *(.rodata*) |
| *(.gnu.linkonce.d*) |
| 0x00800100 . = ALIGN (0x2) |
| 0x00800100 _edata = . |
| 0x00800100 PROVIDE (__data_end, .) |
| .bss 0x00800100 0x0 load address 0x000000e0 |
| 0x00800100 PROVIDE (__bss_start, .) |
| *(.bss) |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| .bss 0x00800100 0x0 blik.o |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_exit.o) |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_copy_data.o) |
| .bss 0x00800100 0x0 /usr/lib/gcc/avr/4.2.2/avr5/libgcc.a(_clear_bss.o) |
| *(.bss*) |
| *(COMMON) |
| 0x00800100 PROVIDE (__bss_end, .) |
| 0x000000e0 __data_load_start = LOADADDR (.data) |
| 0x000000e0 __data_load_end = (__data_load_start + SIZEOF (.data)) |
| .noinit 0x00800100 0x0 |
| 0x00800100 PROVIDE (__noinit_start, .) |
| *(.noinit*) |
| 0x00800100 PROVIDE (__noinit_end, .) |
| 0x00800100 _end = . |
| 0x00800100 PROVIDE (__heap_start, .) |
| .eeprom 0x00810000 0x0 |
| *(.eeprom*) |
| 0x00810000 __eeprom_end = . |
| .fuse |
| *(.fuse) |
| *(.lfuse) |
| *(.hfuse) |
| *(.efuse) |
| .lock |
| *(.lock*) |
| .signature |
| *(.signature*) |
| .stab 0x00000000 0x744 |
| *(.stab) |
| .stab 0x00000000 0x378 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| .stab 0x00000378 0x3cc blik.o |
| 0x3d8 (size before relaxing) |
| .stabstr 0x00000000 0x767 |
| *(.stabstr) |
| .stabstr 0x00000000 0x767 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr5/crtm168.o |
| .stab.excl |
| *(.stab.excl) |
| .stab.exclstr |
| *(.stab.exclstr) |
| .stab.index |
| *(.stab.index) |
| .stab.indexstr |
| *(.stab.indexstr) |
| .comment |
| *(.comment) |
| .debug |
| *(.debug) |
| .line |
| *(.line) |
| .debug_srcinfo |
| *(.debug_srcinfo) |
| .debug_sfnames |
| *(.debug_sfnames) |
| .debug_aranges |
| *(.debug_aranges) |
| .debug_pubnames |
| *(.debug_pubnames) |
| .debug_info |
| *(.debug_info) |
| *(.gnu.linkonce.wi.*) |
| .debug_abbrev |
| *(.debug_abbrev) |
| .debug_line |
| *(.debug_line) |
| .debug_frame |
| *(.debug_frame) |
| .debug_str |
| *(.debug_str) |
| .debug_loc |
| *(.debug_loc) |
| .debug_macinfo |
| *(.debug_macinfo) |
| OUTPUT(blik.out elf32-avr) |
| LOAD linker stubs |
| /programy/C/avr/tests/ATmega168/blik.out |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /programy/C/avr/tests/ATmega8/Makefile |
|---|
| 0,0 → 1,61 |
| # makefile, written by kaklik |
| MCU=atmega8 |
| CC=avr-gcc |
| OBJCOPY=avr-objcopy |
| # optimize for size: |
| CFLAGS=-g -mmcu=$(MCU) -Wall -Wstrict-prototypes -Os -mcall-prologues |
| #------------------- |
| all: blik.hex |
| #------------------- |
| help: |
| @echo "Usage: make all|load|load_pre|rdfuses|wrfuse1mhz|wrfuse4mhz|wrfusecrystal" |
| @echo "Warning: you will not be able to undo wrfusecrystal unless you connect an" |
| @echo " external crystal! uC is dead after wrfusecrystal if you do not" |
| @echo " have an external crystal." |
| #------------------- |
| blik.hex : blik.out |
| $(OBJCOPY) -R .eeprom -O ihex blik.out blik.hex |
| blik.out : blik.o |
| $(CC) $(CFLAGS) -o blik.out -Wl,-Map,blik.map blik.o |
| blik.o : blik.c |
| $(CC) $(CFLAGS) -Os -c blik.c |
| #------------------ |
| load: $(FILE).hex |
| ./prg_load_uc $(FILE).hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_pre: $(FILE).hex |
| ./prg_load_uc $(FILE)_pre.hex |
| # |
| loaduisp: $(FILE).hex |
| ./prg_load_uc -u $(FILE).hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_preuisp: $(FILE)_pre.hex |
| ./prg_load_uc -u avrm8ledtest.hex |
| #------------------- |
| # fuse byte settings: |
| # Atmel AVR ATmega8 |
| # Fuse Low Byte = 0xe1 (1MHz internal), 0xe3 (4MHz internal), 0xe4 (8MHz internal) |
| # Fuse High Byte = 0xd9 |
| # Factory default is 0xe1 for low byte and 0xd9 for high byte |
| # Check this with make rdfuses |
| rdfuses: |
| ./prg_fusebit_uc -r |
| # use internal RC oscillator 1 Mhz |
| wrfuse1mhz: |
| ./prg_fusebit_uc -w 1 |
| # use internal RC oscillator 4 Mhz |
| wrfuse4mhz: |
| ./prg_fusebit_uc -w 4 |
| # use external 3-8 Mhz crystal |
| # Warning: you can not reset this to intenal unless you connect a crystal!! |
| wrfusecrystal: |
| @echo "Warning: The external crystal setting can not be changed back without a working crystal" |
| @echo " You have 3 seconds to abort this with crtl-c" |
| @sleep 3 |
| ./prg_fusebit_uc -w 0 |
| #------------------- |
| clean: |
| rm -f *.o *.map *.out *.hex |
| #------------------- |
| /programy/C/avr/tests/ATmega8/blik.c |
|---|
| 0,0 → 1,76 |
| /********************************************* |
| * vim: set sw=8 ts=8 si : |
| * Author: Guido Socher, Copyright: GPL |
| * This program is to test the led connected to |
| * PC5. |
| * See http://linuxfocus.org/English/November2004/ |
| * for details. |
| * Chip type : ATMEGA644 |
| * Clock frequency : Internal clock 1 Mhz (factory default) |
| *********************************************/ |
| #include <avr/io.h> |
| #include <inttypes.h> |
| #define F_CPU 1000000UL // 1 MHz |
| #include <util/delay.h> |
| /* compatibilty macros for old style */ |
| #ifndef cbi |
| #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) |
| #endif |
| #ifndef sbi |
| #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) |
| #endif |
| void delay_ms(unsigned int ms) |
| /* delay for a minimum of <ms> */ |
| { |
| // we use a calibrated macro. This is more |
| // accurate and not so much compiler dependent |
| // as self made code. |
| while(ms){ |
| _delay_ms(0.96); |
| ms--; |
| } |
| } |
| /* new style */ |
| int main(void) |
| { |
| /* INITIALIZE */ |
| /* enable PC5 as output */ |
| DDRC|= (1<<DDC5); |
| /* PC5 is 5 (see file include/avr/iom8.h) and 1<<PC5 is 00100000 |
| * This can also be written as _BV(PC5)*/ |
| while (1) { |
| /* led on, pin=0 */ |
| PORTC &= ~(1<<PC5); |
| delay_ms(100); |
| /* set output to 5V, LED off */ |
| PORTC|= (1<<PC5); |
| delay_ms(1000); |
| } |
| return(0); |
| } |
| // // old style now depricated: |
| // int main(void) |
| // { |
| // // enable PC5 as output |
| // sbi(DDRC,PC5); |
| // while (1) { |
| // // led on, pin=0 |
| // cbi(PORTC,PC5); |
| // delay_ms(500); |
| // // set output to 5V, LED off |
| // sbi(PORTC,PC5); |
| // delay_ms(500); |
| // } |
| // return(0); |
| // } |
| // // end of old style |
| /programy/C/avr/tests/ATmega8/blik.hex |
|---|
| 0,0 → 1,11 |
| :1000000012C02CC02BC02AC029C028C027C026C0BF |
| :1000100025C024C023C022C021C020C01FC01EC0D4 |
| :100020001DC01CC01BC011241FBECFE5D4E0DEBF25 |
| :10003000CDBF10E0A0E6B0E0E4E9F0E002C005903A |
| :100040000D92A036B107D9F710E0A0E6B0E001C0EC |
| :100050001D92A036B107E1F70ED01BC0D1CF9C0195 |
| :1000600006C080EF90E00197F1F721503040211554 |
| :100070003105B9F70895CFE5D4E0DEBFCDBFA59A2D |
| :10008000AD9884E690E0EBDFAD9A88EE93E0E7DF91 |
| :04009000F7CFFFCFD8 |
| :00000001FF |
| /programy/C/avr/tests/ATmega8/blik.map |
|---|
| 0,0 → 1,350 |
| Archive member included because of file (symbol) |
| /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o (exit) |
| /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_copy_data.o) |
| blik.o (__do_copy_data) |
| /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_clear_bss.o) |
| blik.o (__do_clear_bss) |
| Memory Configuration |
| Name Origin Length Attributes |
| text 0x00000000 0x00002000 xr |
| data 0x00800060 0x0000ffa0 rw !x |
| eeprom 0x00810000 0x00010000 rw !x |
| fuse 0x00820000 0x00000400 rw !x |
| lock 0x00830000 0x00000400 rw !x |
| signature 0x00840000 0x00000400 rw !x |
| *default* 0x00000000 0xffffffff |
| Linker script and memory map |
| LOAD /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| LOAD blik.o |
| LOAD /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a |
| LOAD /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/libc.a |
| LOAD /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a |
| .hash |
| *(.hash) |
| .dynsym |
| *(.dynsym) |
| .dynstr |
| *(.dynstr) |
| .gnu.version |
| *(.gnu.version) |
| .gnu.version_d |
| *(.gnu.version_d) |
| .gnu.version_r |
| *(.gnu.version_r) |
| .rel.init |
| *(.rel.init) |
| .rela.init |
| *(.rela.init) |
| .rel.text |
| *(.rel.text) |
| *(.rel.text.*) |
| *(.rel.gnu.linkonce.t*) |
| .rela.text |
| *(.rela.text) |
| *(.rela.text.*) |
| *(.rela.gnu.linkonce.t*) |
| .rel.fini |
| *(.rel.fini) |
| .rela.fini |
| *(.rela.fini) |
| .rel.rodata |
| *(.rel.rodata) |
| *(.rel.rodata.*) |
| *(.rel.gnu.linkonce.r*) |
| .rela.rodata |
| *(.rela.rodata) |
| *(.rela.rodata.*) |
| *(.rela.gnu.linkonce.r*) |
| .rel.data |
| *(.rel.data) |
| *(.rel.data.*) |
| *(.rel.gnu.linkonce.d*) |
| .rela.data |
| *(.rela.data) |
| *(.rela.data.*) |
| *(.rela.gnu.linkonce.d*) |
| .rel.ctors |
| *(.rel.ctors) |
| .rela.ctors |
| *(.rela.ctors) |
| .rel.dtors |
| *(.rel.dtors) |
| .rela.dtors |
| *(.rela.dtors) |
| .rel.got |
| *(.rel.got) |
| .rela.got |
| *(.rela.got) |
| .rel.bss |
| *(.rel.bss) |
| .rela.bss |
| *(.rela.bss) |
| .rel.plt |
| *(.rel.plt) |
| .rela.plt |
| *(.rela.plt) |
| .text 0x00000000 0x94 |
| *(.vectors) |
| .vectors 0x00000000 0x26 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| 0x00000000 __vectors |
| 0x00000000 __vector_default |
| *(.vectors) |
| *(.progmem.gcc*) |
| *(.progmem*) |
| 0x00000026 . = ALIGN (0x2) |
| 0x00000026 __trampolines_start = . |
| *(.trampolines) |
| .trampolines 0x00000026 0x0 linker stubs |
| *(.trampolines*) |
| 0x00000026 __trampolines_end = . |
| *(.jumptables) |
| *(.jumptables*) |
| *(.lowtext) |
| *(.lowtext*) |
| 0x00000026 __ctors_start = . |
| *(.ctors) |
| 0x00000026 __ctors_end = . |
| 0x00000026 __dtors_start = . |
| *(.dtors) |
| 0x00000026 __dtors_end = . |
| SORT(*)(.ctors) |
| SORT(*)(.dtors) |
| *(.init0) |
| .init0 0x00000026 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| 0x00000026 __init |
| *(.init0) |
| *(.init1) |
| *(.init1) |
| *(.init2) |
| .init2 0x00000026 0xc /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| *(.init2) |
| *(.init3) |
| *(.init3) |
| *(.init4) |
| .init4 0x00000032 0x16 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_copy_data.o) |
| 0x00000032 __do_copy_data |
| .init4 0x00000048 0x10 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_clear_bss.o) |
| 0x00000048 __do_clear_bss |
| *(.init4) |
| *(.init5) |
| *(.init5) |
| *(.init6) |
| *(.init6) |
| *(.init7) |
| *(.init7) |
| *(.init8) |
| *(.init8) |
| *(.init9) |
| .init9 0x00000058 0x4 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| *(.init9) |
| *(.text) |
| .text 0x0000005c 0x2 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| 0x0000005c __vector_1 |
| 0x0000005c __vector_12 |
| 0x0000005c __bad_interrupt |
| 0x0000005c __vector_6 |
| 0x0000005c __vector_3 |
| 0x0000005c __vector_11 |
| 0x0000005c __vector_13 |
| 0x0000005c __vector_17 |
| 0x0000005c __vector_7 |
| 0x0000005c __vector_5 |
| 0x0000005c __vector_4 |
| 0x0000005c __vector_9 |
| 0x0000005c __vector_2 |
| 0x0000005c __vector_15 |
| 0x0000005c __vector_8 |
| 0x0000005c __vector_14 |
| 0x0000005c __vector_10 |
| 0x0000005c __vector_16 |
| 0x0000005c __vector_18 |
| .text 0x0000005e 0x34 blik.o |
| 0x00000076 main |
| 0x0000005e delay_ms |
| .text 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| .text 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_copy_data.o) |
| .text 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_clear_bss.o) |
| 0x00000092 . = ALIGN (0x2) |
| *(.text.*) |
| .text.libgcc 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| .text.libgcc 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_copy_data.o) |
| .text.libgcc 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_clear_bss.o) |
| 0x00000092 . = ALIGN (0x2) |
| *(.fini9) |
| .fini9 0x00000092 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| 0x00000092 exit |
| 0x00000092 _exit |
| *(.fini9) |
| *(.fini8) |
| *(.fini8) |
| *(.fini7) |
| *(.fini7) |
| *(.fini6) |
| *(.fini6) |
| *(.fini5) |
| *(.fini5) |
| *(.fini4) |
| *(.fini4) |
| *(.fini3) |
| *(.fini3) |
| *(.fini2) |
| *(.fini2) |
| *(.fini1) |
| *(.fini1) |
| *(.fini0) |
| .fini0 0x00000092 0x2 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| *(.fini0) |
| 0x00000094 _etext = . |
| .data 0x00800060 0x0 load address 0x00000094 |
| 0x00800060 PROVIDE (__data_start, .) |
| *(.data) |
| .data 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| .data 0x00800060 0x0 blik.o |
| .data 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| .data 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_copy_data.o) |
| .data 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_clear_bss.o) |
| *(.data*) |
| *(.rodata) |
| *(.rodata*) |
| *(.gnu.linkonce.d*) |
| 0x00800060 . = ALIGN (0x2) |
| 0x00800060 _edata = . |
| 0x00800060 PROVIDE (__data_end, .) |
| .bss 0x00800060 0x0 load address 0x00000094 |
| 0x00800060 PROVIDE (__bss_start, .) |
| *(.bss) |
| .bss 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| .bss 0x00800060 0x0 blik.o |
| .bss 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_exit.o) |
| .bss 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_copy_data.o) |
| .bss 0x00800060 0x0 /usr/lib/gcc/avr/4.2.2/avr4/libgcc.a(_clear_bss.o) |
| *(.bss*) |
| *(COMMON) |
| 0x00800060 PROVIDE (__bss_end, .) |
| 0x00000094 __data_load_start = LOADADDR (.data) |
| 0x00000094 __data_load_end = (__data_load_start + SIZEOF (.data)) |
| .noinit 0x00800060 0x0 |
| 0x00800060 PROVIDE (__noinit_start, .) |
| *(.noinit*) |
| 0x00800060 PROVIDE (__noinit_end, .) |
| 0x00800060 _end = . |
| 0x00800060 PROVIDE (__heap_start, .) |
| .eeprom 0x00810000 0x0 |
| *(.eeprom*) |
| 0x00810000 __eeprom_end = . |
| .fuse |
| *(.fuse) |
| *(.lfuse) |
| *(.hfuse) |
| *(.efuse) |
| .lock |
| *(.lock*) |
| .signature |
| *(.signature*) |
| .stab 0x00000000 0x744 |
| *(.stab) |
| .stab 0x00000000 0x378 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| .stab 0x00000378 0x3cc blik.o |
| 0x3d8 (size before relaxing) |
| .stabstr 0x00000000 0x768 |
| *(.stabstr) |
| .stabstr 0x00000000 0x768 /usr/lib/gcc/avr/4.2.2/../../../../avr/lib/avr4/crtm8.o |
| .stab.excl |
| *(.stab.excl) |
| .stab.exclstr |
| *(.stab.exclstr) |
| .stab.index |
| *(.stab.index) |
| .stab.indexstr |
| *(.stab.indexstr) |
| .comment |
| *(.comment) |
| .debug |
| *(.debug) |
| .line |
| *(.line) |
| .debug_srcinfo |
| *(.debug_srcinfo) |
| .debug_sfnames |
| *(.debug_sfnames) |
| .debug_aranges |
| *(.debug_aranges) |
| .debug_pubnames |
| *(.debug_pubnames) |
| .debug_info |
| *(.debug_info) |
| *(.gnu.linkonce.wi.*) |
| .debug_abbrev |
| *(.debug_abbrev) |
| .debug_line |
| *(.debug_line) |
| .debug_frame |
| *(.debug_frame) |
| .debug_str |
| *(.debug_str) |
| .debug_loc |
| *(.debug_loc) |
| .debug_macinfo |
| *(.debug_macinfo) |
| OUTPUT(blik.out elf32-avr) |
| LOAD linker stubs |
| /programy/C/avr/tests/ATmega8/blik.out |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |