| 1,394 → 1,393 |
|---|
| #include <16F887.h> |
| #device *=16 |
| #device adc=8 |
| #device PASS_STRINGS=IN_RAM |
| #zero_ram |
| #FUSES NOWDT //No Watch Dog Timer |
| #FUSES INTRC_IO //Internal RC Osc, no CLKOUT |
| #FUSES PUT //Power Up Timer |
| #FUSES MCLR //Master Clear pin enabled |
| #FUSES NOPROTECT //Code protected from reads |
| #FUSES NOCPD //No EE protection |
| #FUSES BROWNOUT //Reset when brownout detected |
| #FUSES NOIESO //Internal External Switch Over mode disabled |
| #FUSES NOFCMEN //Fail-safe clock monitor disabled |
| #FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O |
| #FUSES NODEBUG //No Debug mode for ICD |
| #FUSES NOWRT //Program memory not write protected |
| #FUSES BORV21 //Brownout reset at 2.1V |
| #use delay(clock=8000000,RESTART_WDT) |
| //#use rs232(baud=9600,parity=N,xmit=TXD,rcv=RXD,bits=8,errors) |
| #use rs232(baud=9600,parity=N,xmit=PIN_B7,rcv=PIN_B6,bits=8) |
| |
| |
| /*$F************************************************************************* |
| * |
| * Copyright (C)pa 2004 Mark Norton |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sublicense, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY |
| * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Functional |
| * Description: Implementation of sscanf() function for the CCS compiler |
| * |
| *****************************************************************************/ |
| #include <string.h> |
| #include <stdlib.h> |
| |
| /* Uncomment any of these to reduce the code size |
| Note that the HEX is a big hog |
| */ |
| #define NO_FLOAT |
| // #define NO_INT |
| // #define NO_SIGNED_INT |
| // #define NO_STRING |
| // #define NO_HEX |
| |
| /* ************************************************************************* |
| DESCRIPTION: Converts string pointed to by s to an unsigned long (16 bit) |
| RETURN: result of the conversion |
| ALGORITHM: none |
| NOTES: the next position in the string is returned in endptr |
| *************************************************************************** */ |
| long my_atoul(char *s, char *endptr, int base) |
| { |
| signed long result; |
| int index; |
| char c; |
| |
| index = 0; |
| result = 0; |
| *endptr = s; |
| |
| if (( !s ) || ( !*s )) |
| return ( 0 ); |
| |
| c = *s; |
| |
| // increase index if positive sign is detected |
| if (c == '+') |
| { |
| c = *(++s); |
| } |
| |
| // The number is a decimal number |
| if (base == 10) |
| { |
| while (c >= '0' && c <= '9') |
| { |
| result = 10*result + (c - '0'); |
| c = *(++s); |
| } |
| } |
| else if (base == 16) // The number is a hexa number |
| { |
| if (c == '0' && (*(s+1) == 'x' || *(s+1) == 'X')) |
| { |
| s += 2; |
| c = *s; |
| } |
| |
| c = toupper(c); |
| while ( 1 ) |
| { |
| if (c >= '0' && c <= '9') |
| result = (result << 4) + (c - '0'); |
| else if (c >= 'A' && c <='F') |
| result = (result << 4) + (c - 'A' + 10); |
| else |
| break; |
| c = toupper(*(++s)); |
| } |
| } |
| *endptr = s; |
| return(result); |
| } |
| |
| /* ************************************************************************* |
| DESCRIPTION: Converts string pointed to by s to a float |
| RETURN: result of the conversion |
| ALGORITHM: none |
| NOTES: the next position in the string is returned in endptr |
| *************************************************************************** */ |
| float my_atof(char * s, char *endptr) |
| { |
| float pow10 = 1.0; |
| float result = 0.0; |
| int sign = 0; |
| char c; |
| |
| c = *s; |
| |
| if(c == '-') |
| { |
| sign = 1; |
| c = *(++s); |
| } |
| else if(c == '+') |
| c = *(++s); |
| |
| |
| while((c >= '0' && c <= '9')) |
| { |
| result = 10*result + c - '0'; |
| c = *(++s); |
| } |
| |
| if (c == '.') |
| { |
| c = *(++s); |
| while((c >= '0' && c <= '9')) |
| { |
| pow10 = pow10*10; |
| result += (c - '0')/pow10; |
| c = *(++s); |
| } |
| } |
| |
| if (sign == 1) |
| result = -1*result; |
| |
| *endptr = s; |
| return(result); |
| } |
| |
| |
| /* ************************************************************************* |
| DESCRIPTION: Implementation of scanf() using CCS C compiler |
| RETURN: total number of arguments read |
| ALGORITHM: none |
| NOTES: none |
| *************************************************************************** */ |
| int8 sscanf( |
| char *buf, /* pointer to the buffer that we are scanning */ |
| char *fmt, /* pointer to the format string */ |
| char *pArgs) /* pointer to array of arguments */ |
| { |
| |
| int8 count = 0; |
| char *p; |
| int1 size_long; |
| int1 sign; |
| char *endptr; |
| |
| while (1) |
| { |
| /* Look to see if we are out of arguments */ |
| if ( !pArgs ) |
| return( count ); |
| |
| /* Gobble up the fmt string */ |
| while (*buf == *fmt) |
| { |
| if ((*buf == 0) || (*fmt == 0)) |
| return (count); |
| buf++; |
| fmt++; |
| } |
| |
| /* Check for the % */ |
| if (*fmt != '%') |
| break; |
| |
| /* fmt should be '%' go to the next character */ |
| fmt++; |
| |
| /* get the size modifier */ |
| switch (*fmt) |
| { |
| case 'l': |
| case 'L': |
| fmt++; |
| size_long = TRUE; |
| break; |
| default: |
| size_long = FALSE; |
| break; |
| } |
| |
| /* fmt should point to our first conversion letter at this point */ |
| switch (*fmt) |
| { |
| #ifndef NO_FLOAT |
| case 'f': |
| case 'F': |
| /* Get a pointer to this argument */ |
| p = (float *)(*pArgs); |
| |
| /* convert to a number */ |
| *(float *)p = (float)my_atof(buf, &endptr); |
| |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_SIGNED_INT |
| case 'd': |
| case 'D': |
| /* Get a pointer to this argument */ |
| p = (signed int8 *)(*pArgs); |
| if (*buf == '-') |
| { |
| buf++; |
| sign = TRUE; |
| } |
| else |
| sign = FALSE; |
| |
| /* convert to a number */ |
| if ( size_long ) |
| { |
| *(signed int16 *)p = (signed int16)my_atoul(buf, &endptr, 10); |
| if (sign) |
| *(signed int16 *)p = -(*(signed int16 *)p); |
| } |
| else |
| { |
| *(signed int8 *)p = (signed int8)my_atoul(buf, &endptr, 10); |
| if (sign) |
| *(signed int8 *)p = -(*(signed int8 *)p); |
| } |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_INT |
| case 'u': |
| case 'U': |
| /* Get a pointer to this argument */ |
| p = (int8 *)(*pArgs); |
| |
| /* convert to a number */ |
| if ( size_long ) |
| *(int16 *)p = (int16) my_atoul(buf, &endptr, 10); |
| else |
| *(int8 *)p = (int8) my_atoul(buf, &endptr, 10); |
| |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_STRING |
| case 's': |
| /* Get a pointer to this argument */ |
| p = (char *)(*pArgs); |
| |
| /* copy the chars */ |
| while (1) |
| { |
| if ((isspace(*buf)) || (!*buf)) |
| { |
| *p = 0; |
| break; |
| } |
| else |
| { |
| *p = *buf; |
| p++; |
| buf++; |
| } |
| } |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_HEX |
| case 'x': |
| case 'X': |
| /* Get a pointer to this argument */ |
| p = (int8 *)(*pArgs); |
| |
| /* convert to a number */ |
| if ( size_long ) |
| *(int16 *)p = (int16) my_atoul(buf, &endptr, 16); |
| else |
| *(int8 *)p = (int8) my_atoul(buf, &endptr, 16); |
| |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| /* unhandled format specifier */ |
| default: |
| return (count); |
| } |
| /* Technically this is incorrect but since the size of all pointers |
| are the same, who cares ;) |
| |
| point to the next argument |
| */ |
| pArgs += sizeof(char *); |
| |
| /* Move to the next format char */ |
| fmt++; |
| } |
| |
| return (count); |
| } |
| |
| |
| |
| void main() { |
| char x; |
| char sbuffer[64]; |
| char cmd=0,param=0; |
| long l; |
| |
| set_tris_a(0x80); |
| port_b_pullups(0xFF); |
| set_tris_b(0xFF); |
| set_tris_d(0); |
| set_tris_e(0x01); |
| setup_oscillator(OSC_8MHZ); |
| setup_adc_ports(sAN5|VSS_VDD); |
| setup_adc(ADC_CLOCK_INTERNAL); |
| set_adc_channel(5); |
| setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
| setup_timer_1(T1_INTERNAL|T1_DIV_BY_2); |
| setup_timer_2(T2_DIV_BY_16, 155, 1); |
| setup_ccp1(CCP_PWM); |
| set_pwm1_duty(75); |
| setup_comparator(NC_NC_NC_NC); |
| |
| sprintf(sbuffer,"/S30\n\"); |
| x = sscanf(sbuffer,"/%C%d", &cmd, ¶m); |
| printf("\n\rsscanf sez: %u found, cmd %X param %X\n\r",x,cmd,param); |
| |
| } |
| #include <16F887.h> |
| #device *=16 |
| #device adc=8 |
| #device PASS_STRINGS=IN_RAM |
| #zero_ram |
| #FUSES NOWDT //No Watch Dog Timer |
| #FUSES INTRC_IO //Internal RC Osc, no CLKOUT |
| #FUSES PUT //Power Up Timer |
| #FUSES MCLR //Master Clear pin enabled |
| #FUSES NOPROTECT //Code protected from reads |
| #FUSES NOCPD //No EE protection |
| #FUSES BROWNOUT //Reset when brownout detected |
| #FUSES NOIESO //Internal External Switch Over mode disabled |
| #FUSES NOFCMEN //Fail-safe clock monitor disabled |
| #FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O |
| #FUSES NODEBUG //No Debug mode for ICD |
| #FUSES NOWRT //Program memory not write protected |
| #FUSES BORV21 //Brownout reset at 2.1V |
| #use delay(clock=8000000,RESTART_WDT) |
| #use rs232(baud=BAUDRATE,parity=N,xmit=TXD,rcv=RXD,bits=8,errors) |
| |
| |
| /*$F************************************************************************* |
| * |
| * Copyright (C)pa 2004 Mark Norton |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sublicense, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY |
| * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Functional |
| * Description: Implementation of sscanf() function for the CCS compiler |
| * |
| *****************************************************************************/ |
| #include <string.h> |
| #include <stdlib.h> |
| |
| /* Uncomment any of these to reduce the code size |
| Note that the HEX is a big hog |
| */ |
| #define NO_FLOAT |
| // #define NO_INT |
| // #define NO_SIGNED_INT |
| // #define NO_STRING |
| // #define NO_HEX |
| |
| /* ************************************************************************* |
| DESCRIPTION: Converts string pointed to by s to an unsigned long (16 bit) |
| RETURN: result of the conversion |
| ALGORITHM: none |
| NOTES: the next position in the string is returned in endptr |
| *************************************************************************** */ |
| long my_atoul(char *s, char *endptr, int base) |
| { |
| signed long result; |
| int index; |
| char c; |
| |
| index = 0; |
| result = 0; |
| *endptr = s; |
| |
| if (( !s ) || ( !*s )) |
| return ( 0 ); |
| |
| c = *s; |
| |
| // increase index if positive sign is detected |
| if (c == '+') |
| { |
| c = *(++s); |
| } |
| |
| // The number is a decimal number |
| if (base == 10) |
| { |
| while (c >= '0' && c <= '9') |
| { |
| result = 10*result + (c - '0'); |
| c = *(++s); |
| } |
| } |
| else if (base == 16) // The number is a hexa number |
| { |
| if (c == '0' && (*(s+1) == 'x' || *(s+1) == 'X')) |
| { |
| s += 2; |
| c = *s; |
| } |
| |
| c = toupper(c); |
| while ( 1 ) |
| { |
| if (c >= '0' && c <= '9') |
| result = (result << 4) + (c - '0'); |
| else if (c >= 'A' && c <='F') |
| result = (result << 4) + (c - 'A' + 10); |
| else |
| break; |
| c = toupper(*(++s)); |
| } |
| } |
| *endptr = s; |
| return(result); |
| } |
| |
| /* ************************************************************************* |
| DESCRIPTION: Converts string pointed to by s to a float |
| RETURN: result of the conversion |
| ALGORITHM: none |
| NOTES: the next position in the string is returned in endptr |
| *************************************************************************** */ |
| float my_atof(char * s, char *endptr) |
| { |
| float pow10 = 1.0; |
| float result = 0.0; |
| int sign = 0; |
| char c; |
| |
| c = *s; |
| |
| if(c == '-') |
| { |
| sign = 1; |
| c = *(++s); |
| } |
| else if(c == '+') |
| c = *(++s); |
| |
| |
| while((c >= '0' && c <= '9')) |
| { |
| result = 10*result + c - '0'; |
| c = *(++s); |
| } |
| |
| if (c == '.') |
| { |
| c = *(++s); |
| while((c >= '0' && c <= '9')) |
| { |
| pow10 = pow10*10; |
| result += (c - '0')/pow10; |
| c = *(++s); |
| } |
| } |
| |
| if (sign == 1) |
| result = -1*result; |
| |
| *endptr = s; |
| return(result); |
| } |
| |
| |
| /* ************************************************************************* |
| DESCRIPTION: Implementation of scanf() using CCS C compiler |
| RETURN: total number of arguments read |
| ALGORITHM: none |
| NOTES: none |
| *************************************************************************** */ |
| int8 sscanf( |
| char *buf, /* pointer to the buffer that we are scanning */ |
| char *fmt, /* pointer to the format string */ |
| char *pArgs) /* pointer to array of arguments */ |
| { |
| |
| int8 count = 0; |
| char *p; |
| int1 size_long; |
| int1 sign; |
| char *endptr; |
| |
| while (1) |
| { |
| /* Look to see if we are out of arguments */ |
| if ( !pArgs ) |
| return( count ); |
| |
| /* Gobble up the fmt string */ |
| while (*buf == *fmt) |
| { |
| if ((*buf == 0) || (*fmt == 0)) |
| return (count); |
| buf++; |
| fmt++; |
| } |
| |
| /* Check for the % */ |
| if (*fmt != '%') |
| break; |
| |
| /* fmt should be '%' go to the next character */ |
| fmt++; |
| |
| /* get the size modifier */ |
| switch (*fmt) |
| { |
| case 'l': |
| case 'L': |
| fmt++; |
| size_long = TRUE; |
| break; |
| default: |
| size_long = FALSE; |
| break; |
| } |
| |
| /* fmt should point to our first conversion letter at this point */ |
| switch (*fmt) |
| { |
| #ifndef NO_FLOAT |
| case 'f': |
| case 'F': |
| /* Get a pointer to this argument */ |
| p = (float *)(*pArgs); |
| |
| /* convert to a number */ |
| *(float *)p = (float)my_atof(buf, &endptr); |
| |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_SIGNED_INT |
| case 'd': |
| case 'D': |
| /* Get a pointer to this argument */ |
| p = (signed int8 *)(*pArgs); |
| if (*buf == '-') |
| { |
| buf++; |
| sign = TRUE; |
| } |
| else |
| sign = FALSE; |
| |
| /* convert to a number */ |
| if ( size_long ) |
| { |
| *(signed int16 *)p = (signed int16)my_atoul(buf, &endptr, 10); |
| if (sign) |
| *(signed int16 *)p = -(*(signed int16 *)p); |
| } |
| else |
| { |
| *(signed int8 *)p = (signed int8)my_atoul(buf, &endptr, 10); |
| if (sign) |
| *(signed int8 *)p = -(*(signed int8 *)p); |
| } |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_INT |
| case 'u': |
| case 'U': |
| /* Get a pointer to this argument */ |
| p = (int8 *)(*pArgs); |
| |
| /* convert to a number */ |
| if ( size_long ) |
| *(int16 *)p = (int16) my_atoul(buf, &endptr, 10); |
| else |
| *(int8 *)p = (int8) my_atoul(buf, &endptr, 10); |
| |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_STRING |
| case 's': |
| /* Get a pointer to this argument */ |
| p = (char *)(*pArgs); |
| |
| /* copy the chars */ |
| while (1) |
| { |
| if ((isspace(*buf)) || (!*buf)) |
| { |
| *p = 0; |
| break; |
| } |
| else |
| { |
| *p = *buf; |
| p++; |
| buf++; |
| } |
| } |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| #ifndef NO_HEX |
| case 'x': |
| case 'X': |
| /* Get a pointer to this argument */ |
| p = (int8 *)(*pArgs); |
| |
| /* convert to a number */ |
| if ( size_long ) |
| *(int16 *)p = (int16) my_atoul(buf, &endptr, 16); |
| else |
| *(int8 *)p = (int8) my_atoul(buf, &endptr, 16); |
| |
| /* Make sure that we succeeded */ |
| if ( buf == endptr ) |
| return ( count ); |
| buf = endptr; |
| |
| /* count this one */ |
| count++; |
| break; |
| #endif |
| /* unhandled format specifier */ |
| default: |
| return (count); |
| } |
| /* Technically this is incorrect but since the size of all pointers |
| are the same, who cares ;) |
| |
| point to the next argument |
| */ |
| pArgs += sizeof(char *); |
| |
| /* Move to the next format char */ |
| fmt++; |
| } |
| |
| return (count); |
| } |
| |
| |
| |
| void main() { |
| char x; |
| char sbuffer[64]; |
| char cmd=0,param=0; |
| long l; |
| |
| set_tris_a(0x80); |
| port_b_pullups(0xFF); |
| set_tris_b(0xFF); |
| set_tris_d(0); |
| set_tris_e(0x01); |
| setup_oscillator(OSC_8MHZ); |
| setup_adc_ports(sAN5|VSS_VDD); |
| setup_adc(ADC_CLOCK_INTERNAL); |
| set_adc_channel(5); |
| setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1); |
| setup_timer_1(T1_INTERNAL|T1_DIV_BY_2); |
| setup_timer_2(T2_DIV_BY_16, 155, 1); |
| setup_ccp1(CCP_PWM); |
| set_pwm1_duty(75); |
| setup_comparator(NC_NC_NC_NC); |
| |
| sprintf(sbuffer,"/S30\n\"); |
| x = sscanf(sbuffer,"/%C%d", &cmd, ¶m); |
| printf("\n\rsscanf sez: %u found, cmd %X param %X\n\r",x,cmd,param); |
| |
| } |