| /programy/C/avr/Blik/avrm8ledtest.map |
|---|
| 0,0 → 1,274 |
| Archive member included because of file (symbol) |
| /usr/lib/gcc/avr/4.1.0/avr4/libgcc.a(_copy_data.o) |
| avrm8ledtest.o (__do_copy_data) |
| /usr/lib/gcc/avr/4.1.0/avr4/libgcc.a(_clear_bss.o) |
| avrm8ledtest.o (__do_clear_bss) |
| Memory Configuration |
| Name Origin Length Attributes |
| text 0x00000000 0x00002000 xr |
| data 0x00800060 0x0000ffa0 rw !x |
| eeprom 0x00810000 0x00010000 rw !x |
| *default* 0x00000000 0xffffffff |
| Linker script and memory map |
| LOAD /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| LOAD avrm8ledtest.o |
| LOAD /usr/lib/gcc/avr/4.1.0/avr4/libgcc.a |
| LOAD /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/libc.a |
| LOAD /usr/lib/gcc/avr/4.1.0/avr4/libgcc.a |
| .hash |
| *(.hash) |
| .dynsym |
| *(.dynsym) |
| .dynstr |
| *(.dynstr) |
| .gnu.version |
| *(.gnu.version) |
| .gnu.version_d |
| *(.gnu.version_d) |
| .gnu.version_r |
| *(.gnu.version_r) |
| .rel.init |
| *(.rel.init) |
| .rela.init |
| *(.rela.init) |
| .rel.text |
| *(.rel.text) |
| *(.rel.text.*) |
| *(.rel.gnu.linkonce.t*) |
| .rela.text |
| *(.rela.text) |
| *(.rela.text.*) |
| *(.rela.gnu.linkonce.t*) |
| .rel.fini |
| *(.rel.fini) |
| .rela.fini |
| *(.rela.fini) |
| .rel.rodata |
| *(.rel.rodata) |
| *(.rel.rodata.*) |
| *(.rel.gnu.linkonce.r*) |
| .rela.rodata |
| *(.rela.rodata) |
| *(.rela.rodata.*) |
| *(.rela.gnu.linkonce.r*) |
| .rel.data |
| *(.rel.data) |
| *(.rel.data.*) |
| *(.rel.gnu.linkonce.d*) |
| .rela.data |
| *(.rela.data) |
| *(.rela.data.*) |
| *(.rela.gnu.linkonce.d*) |
| .rel.ctors |
| *(.rel.ctors) |
| .rela.ctors |
| *(.rela.ctors) |
| .rel.dtors |
| *(.rel.dtors) |
| .rela.dtors |
| *(.rela.dtors) |
| .rel.got |
| *(.rel.got) |
| .rela.got |
| *(.rela.got) |
| .rel.bss |
| *(.rel.bss) |
| .rela.bss |
| *(.rela.bss) |
| .rel.plt |
| *(.rel.plt) |
| .rela.plt |
| *(.rela.plt) |
| .text 0x00000000 0x92 |
| *(.vectors) |
| .vectors 0x00000000 0x26 /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| 0x00000000 __vectors |
| 0x00000000 __vector_default |
| 0x00000026 __ctors_start = . |
| *(.ctors) |
| 0x00000026 __ctors_end = . |
| 0x00000026 __dtors_start = . |
| *(.dtors) |
| 0x00000026 __dtors_end = . |
| *(.progmem.gcc*) |
| *(.progmem*) |
| 0x00000026 . = ALIGN (0x2) |
| *(.init0) |
| *(.init1) |
| *(.init2) |
| .init2 0x00000026 0xc /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| *(.init3) |
| *(.init4) |
| .init4 0x00000032 0x16 /usr/lib/gcc/avr/4.1.0/avr4/libgcc.a(_copy_data.o) |
| 0x00000032 __do_copy_data |
| .init4 0x00000048 0x10 /usr/lib/gcc/avr/4.1.0/avr4/libgcc.a(_clear_bss.o) |
| 0x00000048 __do_clear_bss |
| *(.init5) |
| *(.init6) |
| *(.init7) |
| *(.init8) |
| *(.init9) |
| .init9 0x00000058 0x2 /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| *(.text) |
| .text 0x0000005a 0x2 /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| 0x0000005a __vector_1 |
| 0x0000005a __vector_12 |
| 0x0000005a __bad_interrupt |
| 0x0000005a __vector_6 |
| 0x0000005a __vector_3 |
| 0x0000005a __vector_11 |
| 0x0000005a __vector_13 |
| 0x0000005a __vector_17 |
| 0x0000005a __vector_7 |
| 0x0000005a __vector_5 |
| 0x0000005a __vector_4 |
| 0x0000005a __vector_9 |
| 0x0000005a __vector_2 |
| 0x0000005a __vector_15 |
| 0x0000005a __vector_8 |
| 0x0000005a __vector_14 |
| 0x0000005a __vector_10 |
| 0x0000005a __vector_16 |
| 0x0000005a __vector_18 |
| .text 0x0000005c 0x36 avrm8ledtest.o |
| 0x00000076 main |
| 0x0000005c delay_ms |
| 0x00000092 . = ALIGN (0x2) |
| *(.text.*) |
| 0x00000092 . = ALIGN (0x2) |
| *(.fini9) |
| *(.fini8) |
| *(.fini7) |
| *(.fini6) |
| *(.fini5) |
| *(.fini4) |
| *(.fini3) |
| *(.fini2) |
| *(.fini1) |
| *(.fini0) |
| 0x00000092 _etext = . |
| .data 0x00800060 0x0 load address 0x00000092 |
| 0x00800060 PROVIDE (__data_start, .) |
| *(.data) |
| *(.gnu.linkonce.d*) |
| 0x00800060 . = ALIGN (0x2) |
| 0x00800060 _edata = . |
| 0x00800060 PROVIDE (__data_end, .) |
| .bss 0x00800060 0x0 |
| 0x00800060 PROVIDE (__bss_start, .) |
| *(.bss) |
| *(COMMON) |
| 0x00800060 PROVIDE (__bss_end, .) |
| 0x00000092 __data_load_start = LOADADDR (.data) |
| 0x00000092 __data_load_end = (__data_load_start + SIZEOF (.data)) |
| .noinit 0x00800060 0x0 |
| 0x00800060 PROVIDE (__noinit_start, .) |
| *(.noinit*) |
| 0x00800060 PROVIDE (__noinit_end, .) |
| 0x00800060 _end = . |
| 0x00800060 PROVIDE (__heap_start, .) |
| .eeprom 0x00810000 0x0 |
| *(.eeprom*) |
| 0x00810000 __eeprom_end = . |
| .stab 0x00000000 0x738 |
| *(.stab) |
| .stab 0x00000000 0x36c /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| .stab 0x0000036c 0x3cc avrm8ledtest.o |
| 0x3d8 (size before relaxing) |
| .stabstr 0x00000000 0x76d |
| *(.stabstr) |
| .stabstr 0x00000000 0x76d /usr/lib/gcc/avr/4.1.0/../../../../avr/lib/avr4/crtm8.o |
| .stab.excl |
| *(.stab.excl) |
| .stab.exclstr |
| *(.stab.exclstr) |
| .stab.index |
| *(.stab.index) |
| .stab.indexstr |
| *(.stab.indexstr) |
| .comment |
| *(.comment) |
| .debug |
| *(.debug) |
| .line |
| *(.line) |
| .debug_srcinfo |
| *(.debug_srcinfo) |
| .debug_sfnames |
| *(.debug_sfnames) |
| .debug_aranges |
| *(.debug_aranges) |
| .debug_pubnames |
| *(.debug_pubnames) |
| .debug_info |
| *(.debug_info) |
| *(.gnu.linkonce.wi.*) |
| .debug_abbrev |
| *(.debug_abbrev) |
| .debug_line |
| *(.debug_line) |
| .debug_frame |
| *(.debug_frame) |
| .debug_str |
| *(.debug_str) |
| .debug_loc |
| *(.debug_loc) |
| .debug_macinfo |
| *(.debug_macinfo) |
| OUTPUT(avrm8ledtest.out elf32-avr) |
| /programy/C/avr/Blik/avrm8ledtest.out |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /programy/C/avr/Blik/avrm8ledtest.c |
|---|
| 0,0 → 1,76 |
| /********************************************* |
| * vim: set sw=8 ts=8 si : |
| * Author: Guido Socher, Copyright: GPL |
| * This program is to test the led connected to |
| * PC5. |
| * See http://linuxfocus.org/English/November2004/ |
| * for details. |
| * Chip type : ATMEGA8 |
| * Clock frequency : Internal clock 1 Mhz (factory default) |
| *********************************************/ |
| #include <avr/io.h> |
| #include <inttypes.h> |
| #define F_CPU 17000000UL // 1 MHz |
| #include <avr/delay.h> |
| /* compatibilty macros for old style */ |
| #ifndef cbi |
| #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) |
| #endif |
| #ifndef sbi |
| #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) |
| #endif |
| void delay_ms(unsigned int ms) |
| /* delay for a minimum of <ms> */ |
| { |
| // we use a calibrated macro. This is more |
| // accurate and not so much compiler dependent |
| // as self made code. |
| while(ms){ |
| _delay_ms(0.96); |
| ms--; |
| } |
| } |
| /* new style */ |
| int main(void) |
| { |
| /* INITIALIZE */ |
| /* enable PC5 as output */ |
| DDRC|= (1<<DDC5); |
| /* PC5 is 5 (see file include/avr/iom8.h) and 1<<PC5 is 00100000 |
| * This can also be written as _BV(PC5)*/ |
| while (1) { |
| /* led on, pin=0 */ |
| PORTC &= ~(1<<PC5); |
| delay_ms(500); |
| /* set output to 5V, LED off */ |
| PORTC|= (1<<PC5); |
| delay_ms(500); |
| } |
| return(0); |
| } |
| // // old style now depricated: |
| // int main(void) |
| // { |
| // // enable PC5 as output |
| // sbi(DDRC,PC5); |
| // while (1) { |
| // // led on, pin=0 |
| // cbi(PORTC,PC5); |
| // delay_ms(500); |
| // // set output to 5V, LED off |
| // sbi(PORTC,PC5); |
| // delay_ms(500); |
| // } |
| // return(0); |
| // } |
| // // end of old style |
| /programy/C/avr/Blik/avrm8ledtest.hex |
|---|
| 0,0 → 1,11 |
| :1000000012C02BC02AC029C028C027C026C025C0C6 |
| :1000100024C023C022C021C020C01FC01EC01DC0DC |
| :100020001CC01BC01AC011241FBECFE5D4E0DEBF28 |
| :10003000CDBF10E0A0E6B0E0E2E9F0E002C005903C |
| :100040000D92A036B107D9F710E0A0E6B0E001C0EC |
| :100050001D92A036B107E1F70EC0D2CF9C01E0EFB0 |
| :10006000FFE005C0CF010197F1F721503040211585 |
| :100070003105C1F70895CFE5D4E0DEBFCDBFA59A25 |
| :10008000AD9884EF91E0EADFAD9A84EF91E0E6DF8E |
| :02009000F7CFA8 |
| :00000001FF |
| /programy/C/avr/Blik/Makefile |
|---|
| 0,0 → 1,62 |
| # makefile, written by guido socher |
| MCU=atmega8 |
| #MCU=at90s4433 |
| CC=avr-gcc |
| OBJCOPY=avr-objcopy |
| # optimize for size: |
| CFLAGS=-g -mmcu=$(MCU) -Wall -Wstrict-prototypes -Os -mcall-prologues |
| #------------------- |
| all: avrm8ledtest.hex |
| #------------------- |
| help: |
| @echo "Usage: make all|load|load_pre|rdfuses|wrfuse1mhz|wrfuse4mhz|wrfusecrystal" |
| @echo "Warning: you will not be able to undo wrfusecrystal unless you connect an" |
| @echo " external crystal! uC is dead after wrfusecrystal if you do not" |
| @echo " have an external crystal." |
| #------------------- |
| avrm8ledtest.hex : avrm8ledtest.out |
| $(OBJCOPY) -R .eeprom -O ihex avrm8ledtest.out avrm8ledtest.hex |
| avrm8ledtest.out : avrm8ledtest.o |
| $(CC) $(CFLAGS) -o avrm8ledtest.out -Wl,-Map,avrm8ledtest.map avrm8ledtest.o |
| avrm8ledtest.o : avrm8ledtest.c |
| $(CC) $(CFLAGS) -Os -c avrm8ledtest.c |
| #------------------ |
| load: avrm8ledtest.hex |
| ./prg_load_uc avrm8ledtest.hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_pre: avrm8ledtest_pre.hex |
| ./prg_load_uc avrm8ledtest.hex |
| # |
| loaduisp: avrm8ledtest.hex |
| ./prg_load_uc -u avrm8ledtest.hex |
| # here is a pre-compiled version in case you have trouble with |
| # your development environment |
| load_preuisp: avrm8ledtest_pre.hex |
| ./prg_load_uc -u avrm8ledtest.hex |
| #------------------- |
| # fuse byte settings: |
| # Atmel AVR ATmega8 |
| # Fuse Low Byte = 0xe1 (1MHz internal), 0xe3 (4MHz internal), 0xe4 (8MHz internal) |
| # Fuse High Byte = 0xd9 |
| # Factory default is 0xe1 for low byte and 0xd9 for high byte |
| # Check this with make rdfuses |
| rdfuses: |
| ./prg_fusebit_uc -r |
| # use internal RC oscillator 1 Mhz |
| wrfuse1mhz: |
| ./prg_fusebit_uc -w 1 |
| # use internal RC oscillator 4 Mhz |
| wrfuse4mhz: |
| ./prg_fusebit_uc -w 4 |
| # use external 3-8 Mhz crystal |
| # Warning: you can not reset this to intenal unless you connect a crystal!! |
| wrfusecrystal: |
| @echo "Warning: The external crystal setting can not be changed back without a working crystal" |
| @echo " You have 3 seconds to abort this with crtl-c" |
| @sleep 3 |
| ./prg_fusebit_uc -w 0 |
| #------------------- |
| clean: |
| rm -f *.o *.map *.out *t.hex |
| #------------------- |
| /programy/C/avr/Blik/README.txt |
|---|
| 0,0 → 1,63 |
| AVR GCC development environment test software. |
| See the following article for details: |
| http://main.linuxfocus.org/English/November2004/article352.shtml |
| To compile type the command: |
| make |
| Note: You will get some warnings "#warning "This header file is obsolete." |
| during compilation with avr-libc-1.4.X. This is because this code will |
| also work with avr-libc-1.2.X |
| Alternative 1: Programming with uisp (dapa programmer): |
| ------------------------------------------------------- |
| Make sure that you have loaded the following modules in the kernel (for 2.4.x) |
| before you use the uisp programmer: |
| > /sbin/lsmod |
| Module Size Used by |
| parport_pc 17808 0 |
| ppdev 5312 0 (unused) |
| parport 25856 0 [parport_pc ppdev] |
| To compile and load use: |
| make loaduisp |
| Alternative 2: Programming with avrusb500 (high speed usb programmer from tuxgraphics): |
| --------------------------------------------------------------------------------------- |
| Make sure that you have loaded the following modules in the kernel |
| before you use the uisp programmer: |
| > /sbin/lsmod |
| Module Size Used by |
| ftdi_sio 20568 0 |
| usbcore 57792 1 [ftdi_sio usbserial] |
| To compile and load use: |
| make load |
| Files: |
| ------ |
| avrm8ledtest.c # the c source code for ATmega8 |
| avrm8ledtest_pre.hex # pre-compiled loadable object in case you have |
| # trouble to compile the software |
| Makefile # Makefile |
| README.txt # this file |
| circuit.gif # schematic as gif image |
| ------------------------------------------- |
| History: |
| version 0.1: 2004-10-01, first Version |
| version 0.2: 2004-12-30, corrected fault in delay_ms function |
| version 0.3: 2005-10-04, new modular programming with the scripts prg_load_uc |
| and prg_fusebit_uc for easy transition to the new |
| avrusb500 programmer |
| version 0.4: 2006-03-02, compiler independent delay loop. The old delay_ms |
| would behave totally different with the new gcc-4 |
| version. |
| version 0.5: 2006-03-10, Fault in delay_ms corrected |
| ------------------------------------------- |
| Copyright: GPL |
| Written by guido socher <guido at tuxgraphics.org> |
| ------------------------------------------- |
| /programy/C/avr/Blik/avrm8ledtest_pre.hex |
|---|
| 0,0 → 1,11 |
| :1000000012C02BC02AC029C028C027C026C025C0C6 |
| :1000100024C023C022C021C020C01FC01EC01DC0DC |
| :100020001CC01BC01AC011241FBECFE5D4E0DEBF28 |
| :10003000CDBF10E0A0E6B0E0E6E9F0E002C0059038 |
| :100040000D92A036B107D9F710E0A0E6B0E001C0EC |
| :100050001D92A036B107E1F710C0D2CFAC0120E06D |
| :1000600030E0E0EFF0E005C0CF010197F1F72F5F3E |
| :100070003F4F24173507C1F70895CFE5D4E0DEBF21 |
| :10008000CDBFA59AAD9884EF91E0E8DFAD9A84EFFB |
| :0600900091E0E4DFF7CF70 |
| :00000001FF |
| /programy/C/avr/Blik/prg_fusebit_uc |
|---|
| 0,0 → 1,97 |
| #!/bin/sh |
| prg="adude" |
| # |
| help() |
| { |
| echo "prg_fusebit_uc -- read and write fuse bits of the atmega8" |
| echo "" |
| echo "Usage: prg_fusebit_uc [-hu] -r|-w Freq" |
| echo "" |
| echo "OPTIONS: -h this help" |
| echo " -r read fuse bytes" |
| echo " -u use uisp instead of avrdude" |
| echo " avrdude can automatically detect dapa or avrusb500." |
| echo " uisp can only be used with the parallel port dapa." |
| echo " -w write fuse bytes such that a given Freq is used" |
| echo " a frequency of 0 means external crystal. Possible" |
| echo " values are 0,1,2,4,8" |
| echo "" |
| echo "EXAMPLE: program the fuses to 4MHz internal" |
| echo " prg_fusebit_uc -w 4" |
| echo "" |
| echo "Warning: you can not undo the setting \"external crystal\" unless" |
| echo " you have a crystal that works." |
| echo "This script can be easily adapted to different programmer types" |
| exit 0 |
| } |
| while [ -n "$1" ]; do |
| case $1 in |
| -h) help;shift 1;; |
| -u) prg="uisp";shift 1;; |
| -r) opt_r="1";shift 1;; |
| -w) opt_w="1";freq="$2";shift 2;; |
| -*) echo "error: no such option $1. -h for help";exit 1;; |
| *) break;; |
| esac |
| done |
| if [ -z "$opt_r" -a -z "$opt_w" ];then |
| # one of those options is mandatory |
| help |
| fi |
| hf=0xd9 |
| if [ "$opt_w" = "1" ]; then |
| case $freq in |
| 0) lf=0xee;echo "Make sure you have a crystal otherwise you can not change this!";sleep 2;; |
| 1) lf=0xe1;; |
| 2) lf=0xe2;; |
| 4) lf=0xe3;; |
| 8) lf=0xe4;; |
| *) echo "error: no such frequency, -h for help";exit 1;; |
| esac |
| fi |
| if [ "$prg" = "uisp" ]; then |
| if [ "$opt_r" = "1" ];then |
| set -x |
| uisp -dlpt=/dev/parport0 -dprog=dapa --rd_fuses |
| set +x |
| echo "Explanation: Fuse Low Byte: 0xe1 (1MHz intern), 0xe3 (4MHz intern), " |
| echo " 0xe4 (8MHz intern)" |
| echo " Fuse High Byte should be 0xd9" |
| exit 0 |
| fi |
| if [ "$opt_w" = "1" ]; then |
| set -x |
| uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_l=$lf |
| uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_h=$hf |
| set +x |
| exit 0 |
| fi |
| fi |
| if [ "$prg" = "adude" ]; then |
| if grep "Vendor=0403 ProdID=6001" /proc/bus/usb/devices > /dev/null ; then |
| prg="avrusb500" |
| else |
| prg="dapa" |
| fi |
| if [ "$opt_r" = "1" ];then |
| set -x |
| avrdude -p m8 -c $prg -v -q |
| set +x |
| echo "Explanation: Fuse Low Byte: 0xe1 (1MHz intern), 0xe3 (4MHz intern), " |
| echo " 0xe4 (8MHz intern)" |
| echo " Fuse High Byte should be 0xd9" |
| exit 0 |
| fi |
| if [ "$opt_w" = "1" ]; then |
| set -x |
| avrdude -p m8 -c $prg -u -v -U lfuse:w:$lf:m |
| avrdude -p m8 -c $prg -u -v -U hfuse:w:$hf:m |
| set +x |
| exit 0 |
| fi |
| fi |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |
| /programy/C/avr/Blik/prg_load_uc |
|---|
| 0,0 → 1,38 |
| #!/bin/sh |
| prg="adude" |
| if [ "$1" = "-u" ]; then |
| shift; |
| prg="uisp" |
| fi |
| if [ -z "$1" -o "$1" = "-h" -o "$1" = "--help" ]; then |
| echo "prg_load_uc -- load a .hex file into a atmega8 microcontroller" |
| echo "" |
| echo "Usage: prg_load_uc [-hu] File.hex" |
| echo "" |
| echo "OPTIONS: -h this help" |
| echo " -u use uisp instead of avrdude" |
| echo " avrdude can automatically detect dapa or avrusb500." |
| echo " uisp can only be used with the parallel port dapa." |
| echo "" |
| echo "This script can be easily adapted to different programmer types" |
| exit 0 |
| fi |
| pfile="$1" |
| if [ "$prg" = "uisp" ]; then |
| set -x |
| uisp -dlpt=/dev/parport0 --erase -dprog=dapa |
| uisp -dlpt=/dev/parport0 --upload if="$pfile" -dprog=dapa -v=3 --hash=32 --verify |
| set +x |
| fi |
| if [ "$prg" = "adude" ]; then |
| if grep "Vendor=0403 ProdID=6001" /proc/bus/usb/devices > /dev/null ; then |
| set -x |
| avrdude -p m8 -c avrusb500 -e -U flash:w:"$pfile" |
| set +x |
| else |
| set -x |
| avrdude -p m8 -c dapa -e -U flash:w:"$pfile" |
| set +x |
| fi |
| fi |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |
| /programy/C/avr/Blik/prg_read_uc |
|---|
| 0,0 → 1,38 |
| #!/bin/sh |
| prg="adude" |
| if [ "$1" = "-u" ]; then |
| shift; |
| prg="uisp" |
| fi |
| if [ -z "$1" -o "$1" = "-h" -o "$1" = "--help" ]; then |
| echo "prg_read_uc -- read the flahs of an atmega8 microcontroller" |
| echo "" |
| echo "Usage: prg_load_uc [-hu] File.hex" |
| echo "" |
| echo "OPTIONS: -h this help" |
| echo " -u use uisp instead of avrdude" |
| echo " avrdude can automatically detect dapa or avrusb500." |
| echo " uisp can only be used with the parallel port dapa." |
| echo "" |
| echo "This script can be easily adapted to different programmer types" |
| exit 0 |
| fi |
| pfile="$1" |
| if [ "$prg" = "uisp" ]; then |
| set -x |
| #uisp -dlpt=/dev/parport0 --erase -dprog=dapa |
| #uisp -dlpt=/dev/parport0 --upload if="$pfile" -dprog=dapa -v=3 --hash=32 --verify |
| set +x |
| fi |
| if [ "$prg" = "adude" ]; then |
| if grep "Vendor=0403 ProdID=6001" /proc/bus/usb/devices > /dev/null ; then |
| set -x |
| avrdude -v -v -p m8 -c avrusb500 -U flash:r:"$pfile:i" |
| set +x |
| else |
| set -x |
| avrdude -p m8 -c dapa -U flash:r:"$pfile:i" |
| set +x |
| fi |
| fi |
| Property changes: |
| Added: svn:executable |
| +* |
| \ No newline at end of property |