Subversion Repositories svnkaklik

Compare Revisions

Regard whitespace Rev 142 → Rev 143

/roboti/istrobot/Laserus/SW/PIC/873/Reg.H
0,0 → 1,298
// Komplete definition of all Special Feature Registers
// of PIC16F87 and PIC16F88
// (c)miho 2005
 
#nolist
 
// SFR Registers in Memory Bank 0
#byte INDF = 0x00
#byte TMR0 = 0x01
#byte PCL = 0x02
#byte STATUS = 0x03
#bit IRP = STATUS.7
#bit RP1 = STATUS.6
#bit RP0 = STATUS.5
#bit TO = STATUS.4
#bit PD = STATUS.3
#bit Z = STATUS.2
#bit DC = STATUS.1
#bit C = STATUS.0
#byte FSR = 0x04
#byte PORTA = 0x05
#byte PORTB = 0x06
#byte PCLATH = 0x0A
#byte INTCON = 0x0B
#bit GIE = INTCON.7
#bit PEIE = INTCON.6
#bit TMR0IE = INTCON.5
#bit INT0IE = INTCON.4
#bit RBIE = INTCON.3
#bit TMR0IF = INTCON.2
#bit INT0IF = INTCON.1
#bit RBIF = INTCON.0
#byte PIR1 = 0x0C
#bit ADIF = PIR1.6
#bit RCIF = PIR1.5
#bit TXIF = PIR1.4
#bit SSPIF = PIR1.3
#bit CCP1IF = PIR1.2
#bit TMR2IF = PIR1.1
#bit TMR1IF = PIR1.0
#byte PIR2 = 0x0D
#bit OSFIF = PIR2.7
#bit CMIF = PIR2.6
#bit EEIF = PIR2.4
#byte TMR1L = 0x0E
#byte TMR1H = 0x0F
#byte T1CON = 0x10
#bit T1RUN = T1CON.6
#bit T1CKPS1 = T1CON.5
#bit T1CKPS0 = T1CON.4
#bit T1OSCEN = T1CON.3
#bit T1SYNC = T1CON.2
#bit TMR1CS = T1CON.1
#bit TMR1ON = T1CON.0
#byte TMR2 = 0x11
#byte T2CON = 0x12
#bit TOUTPS3 = T2CON.6
#bit TOUTPS2 = T2CON.5
#bit TOUTPS1 = T2CON.4
#bit TOUTPS0 = T2CON.3
#bit TMR2ON = T2CON.2
#bit T2CKPS1 = T2CON.1
#bit T2CKPS0 = T2CON.0
#byte SSPBUF = 0x13
#byte SSPCON1 = 0x14
#bit WCOL = SSPCON1.7
#bit SSPOV = SSPCON1.6
#bit SSPEN = SSPCON1.5
#bit CKP = SSPCON1.4
#bit SSPM3 = SSPCON1.3
#bit SSPM2 = SSPCON1.2
#bit SSPM1 = SSPCON1.1
#bit SSPM0 = SSPCON1.0
#byte CCPR1L = 0x15
#byte CCPR1H = 0x16
#byte CCP1CON = 0x17
#bit CCP1X = CCP1CON.5
#bit CCP1Y = CCP1CON.4
#bit CCP1M3 = CCP1CON.3
#bit CCP1M2 = CCP1CON.2
#bit CCP1M1 = CCP1CON.1
#bit CCP1M0 = CCP1CON.0
#byte RCSTA = 0x18
#bit SPEN = RCSTA.7
#bit RX9 = RCSTA.6
#bit SREN = RCSTA.5
#bit CREN = RCSTA.4
#bit ADDEN = RCSTA.3
#bit FERR = RCSTA.2
#bit OERR = RCSTA.1
#bit RX9D = RCSTA.0
#byte TXREG = 0x19
#byte RCREG = 0x1A
#byte ADRESH = 0x1E // F88 only
#byte ADCON0 = 0x1F // F88 only
#bit ADCS1 = ADCON0.7
#bit ADCS0 = ADCON0.6
#bit CHS2 = ADCON0.5
#bit CHS1 = ADCON0.4
#bit CHS0 = ADCON0.3
#bit GO = ADCON0.2
#bit ADON = ADCON0.0
 
// SFR Registers in Memory Bank 1
#byte INDF_1 = 0x80 // miror
#byte OPTION = 0x81
#bit RBPU = OPTION.7
#bit INTEDG = OPTION.6
#bit T0CS = OPTION.5
#bit T0SE = OPTION.4
#bit PSA = OPTION.3
#bit PS2 = OPTION.2
#bit PS1 = OPTION.1
#bit PS0 = OPTION.0
#byte PCL = 0x82
#byte STATUS_1 = 0x83 // mirror
#bit IRP_1 = STATUS_1.7
#bit RP1_1 = STATUS_1.6
#bit RP0_1 = STATUS_1.5
#bit TO_1 = STATUS_1.4
#bit PD_1 = STATUS_1.3
#bit Z_1 = STATUS_1.2
#bit DC_1 = STATUS_1.1
#bit C_1 = STATUS_1.0
#byte FSR = 0x84
#byte TRISA = 0x85
#byte TRISB = 0x86
#byte PCLATH_1 = 0x8A // mirror
#byte INTCON_1 = 0x8B // mirror
#bit GIE_1 = INTCON_1.7
#bit PEIE_1 = INTCON_1.6
#bit TMR0IE_1 = INTCON_1.5
#bit INT0IE_1 = INTCON_1.4
#bit RBIE_1 = INTCON_1.3
#bit TMR0IF_1 = INTCON_1.2
#bit INT0IF_1 = INTCON_1.1
#bit RBIF_1 = INTCON_1.0
#byte PIE1 = 0x8C
#bit ADIE = PIE1.6
#bit RCIE = PIE1.5
#bit TXIE = PIE1.4
#bit SSPIE = PIE1.3
#bit CCP1IE = PIE1.2
#bit TMR2IE = PIE1.1
#bit TMR1IE = PIE1.0
#byte PIE2 = 0x8D
#bit OSFIE = PIE2.7
#bit CMIE = PIE2.6
#bit EEIE = PIE2.4
#byte PCON = 0x8E
#bit POR = PCON.1
#bit BOR = PCON.0
#byte OSCCON = 0x8F
#bit IRCF2 = OSCCON.6
#bit IRCF1 = OSCCON.5
#bit IRCF0 = OSCCON.4
#bit OSTS = OSCCON.3
#bit IOFS = OSCCON.2
#bit SCS1 = OSCCON.1
#bit SCS0 = OSCCON.0
#byte OSCTUNE = 0x90
#bit TUN5 = OSCTUNE.5
#bit TUN4 = OSCTUNE.4
#bit TUN3 = OSCTUNE.3
#bit TUN2 = OSCTUNE.2
#bit TUN1 = OSCTUNE.1
#bit TUN0 = OSCTUNE.0
#byte PR2 = 0x92
#byte SSPADD = 0x93
#byte SSPSTAT = 0x94
#bit SMP = SSPSTAT.7
#bit CKE = SSPSTAT.6
#bit DA = SSPSTAT.5
#bit P = SSPSTAT.4
#bit S = SSPSTAT.3
#bit RW = SSPSTAT.2
#bit UA = SSPSTAT.1
#bit BF = SSPSTAT.0
#byte TXSTA = 0x98
#bit CSRC = TXSTA.7
#bit TX9 = TXSTA.6
#bit TXEN = TXSTA.5
#bit SYNC = TXSTA.4
#bit BRGH = TXSTA.2
#bit TRMT = TXSTA.1
#bit TX9D = TXSTA.0
#byte SPBRG = 0x99
#byte ANSEL = 0x9B // F88 only
#bit ANS6 = ANSEL.6
#bit ANS5 = ANSEL.5
#bit ANS4 = ANSEL.4
#bit ANS3 = ANSEL.3
#bit ANS2 = ANSEL.2
#bit ANS1 = ANSEL.1
#bit ANS0 = ANSEL.0
#byte CMCON = 0x9C
// #bit C2OUT = CMCON.7
// #bit C1OUT = CMCON.6
#bit C2INV = CMCON.5
#bit C1INV = CMCON.4
#bit CIS = CMCON.3
#bit CM2 = CMCON.2
#bit CM1 = CMCON.1
#bit CM0 = CMCON.0
#byte CVRCON = 0x9D
#bit CVREN = CVRCON.7
#bit CVROE = CVRCON.6
#bit CVRR = CVRCON.5
#bit CVR3 = CVRCON.3
#bit CVR2 = CVRCON.2
#bit CVR1 = CVRCON.1
#bit CVR0 = CVRCON.0
#byte ADRESL = 0x9E // F88 only
#byte ADCON1 = 0x9F // F88 only
#bit ADFM = ADCON1.7
#bit ADCS2 = ADCON1.6
#bit VCFG1 = ADCON1.5
#bit VCFG0 = ADCON1.4
 
// SFR Registers in Memory Bank 2
#byte INDF_2 = 0x100 // mirror
#byte TMR0_2 = 0x101 // mirror
#byte PCL_2 = 0x102 // mirror
#byte STATUS_2 = 0x103 // mirror
#bit IRP_2 = STATUS_2.7
#bit RP1_2 = STATUS_2.6
#bit RP0_2 = STATUS_2.5
#bit TO_2 = STATUS_2.4
#bit PD_2 = STATUS_2.3
#bit Z_2 = STATUS_2.2
#bit DC_2 = STATUS_2.1
#bit C_2 = STATUS_2.0
#byte FSR_2 = 0x104 // mirror
#byte WDTCON = 0x105
#bit WDTPS3 = WDTCON.4
#bit WDTPS2 = WDTCON.3
#bit WDTPS1 = WDTCON.2
#bit WDTPS0 = WDTCON.1
#bit SWDTEN = WDTCON.0
#byte PORTB_2 = 0x106 // mirror
#byte PCLATH_2 = 0x10A // mirror
#byte INTCON_2 = 0x10B // mirror
#bit GIE_2 = INTCON_2.7
#bit PEIE_2 = INTCON_2.6
#bit TMR0IE_2 = INTCON_2.5
#bit INT0IE_2 = INTCON_2.4
#bit RBIE_2 = INTCON_2.3
#bit TMR0IF_2 = INTCON_2.2
#bit INT0IF_2 = INTCON_2.1
#bit RBIF_2 = INTCON_2.0
#byte EEDATA = 0x10C
#byte EEADR = 0x10D
#byte EEDATH = 0x10E
#byte EEADRH = 0x10F
 
// SFR Registers in Memory Bank 3
#byte INDF_3 = 0x180 // mirror
#byte OPTION_3 = 0x181 // mirror
#bit RBPU_3 = OPTION_3.7
#bit INTEDG_3 = OPTION_3.6
#bit T0CS_3 = OPTION_3.5
#bit T0SE_3 = OPTION_3.4
#bit PSA_3 = OPTION_3.3
#bit PS2_3 = OPTION_3.2
#bit PS1_3 = OPTION_3.1
#bit PS0_3 = OPTION_3.0
#byte PCL_3 = 0x182 // mirror
#byte STATUS_3 = 0x183 // mirror
#bit IRP_3 = STATUS_3.7
#bit RP1_3 = STATUS_3.6
#bit RP0_3 = STATUS_3.5
#bit TO_3 = STATUS_3.4
#bit PD_3 = STATUS_3.3
#bit Z_3 = STATUS_3.2
#bit DC_3 = STATUS_3.1
#bit C_3 = STATUS_3.0
#byte FSR_3 = 0x184 // mirror
#byte TRISB_3 = 0x186 // mirror
#byte PLATH_3 = 0x18A // mirror
#byte INTCON_3 = 0x18B // mirror
#bit GIE_3 = INTCON_3.7
#bit PEIE_3 = INTCON_3.6
#bit TMR0IE_3 = INTCON_3.5
#bit INT0IE_3 = INTCON_3.4
#bit RBIE_3 = INTCON_3.3
#bit TMR0IF_3 = INTCON_3.2
#bit INT0IF_3 = INTCON_3.1
#bit RBIF_3 = INTCON_3.0
#byte EECON1 = 0x18C
#bit EEPGD = EECON1.7
#bit FREE = EECON1.4
#bit WRERR = EECON1.3
#bit WREN = EECON1.2
#bit WR = EECON1.1
#bit RD = EECON1.0
#byte EECON2 = 0x18D
 
#list
/roboti/istrobot/Laserus/SW/PIC/873/laserus.PJT
0,0 → 1,40
[PROJECT]
Target=laserus.HEX
Development_Mode=
Processor=0x873F
ToolSuite=CCS
 
[Directories]
Include=C:\Program Files\PICC\devices\;C:\Program Files\PICC\Dr
Library=
LinkerScript=
 
[Target Data]
FileList=C:\PIC\laserus\873\laserus.c
BuildTool=C-COMPILER
OptionString=+FM
AdditionalOptionString=
BuildRequired=1
 
[laserus.c]
Type=4
Path=
FileList=
BuildTool=
OptionString=
AdditionalOptionString=
 
[mru-list]
1=laserus.c
 
[Windows]
0=0000 laserus.c 0 0 796 451 3 0
 
[Opened Files]
1=C:\PIC\laserus\873\laserus.c
2=C:\PIC\laserus\873\laserus.h
3=C:\Program Files\PICC\devices\16F873.h
4=
[Units]
Count=1
1=C:\PIC\laserus\873\laserus.c (main)
/roboti/istrobot/Laserus/SW/PIC/873/laserus.c
0,0 → 1,130
#include "laserus.h"
 
#define SERVO PIN_B5 // Vystup pro rizeni serva
#define LASER PIN_B4 // Vstup pro cteni laseru
 
#define MOT_DIR_L PIN_C0 // Rizeni smeru otaceni motoru
#define MOT_DIR_R PIN_C3
 
// kroutitka
#define CERVENA 0 // AN0
#define CERNA 1 // AN1
//#define ZELENA 3 // AN3
//#define MODRA 4 // AN4
 
#byte INTCON = 0x0B // Interrupt configuration register
#bit GIE = INTCON.7
#bit PEIE = INTCON.6
#bit TMR0IE = INTCON.5
#bit INT0IE = INTCON.4
#bit RBIE = INTCON.3
#bit TMR0IF = INTCON.2
#bit INT0IF = INTCON.1
#bit RBIF = INTCON.0
 
boolean edge;
int8 uhel, olduhel;
int16 uhel16;
 
#int_EXT
EXT_isr()
{
int n, t1, t2, t;
 
set_timer0(0); // Vynulovani casovace pro 2ms
output_high(SERVO);
while(get_timer0()<(1000/256)); // Ceka 1ms
for(n=uhel; n>0; n--) delay_us(3); // Sirka impulzu podle uhlu
output_low(SERVO);
while(get_timer0()<(3000/256)); // Ceka do 3ms, nez zacne scanovat
 
set_timer0(0); // Vynulovani casovace pro zjisteni polohy cary
if(edge) // Zrcatko prejizdelo tam nebo zpet?
{
edge=false;
ext_int_edge(H_TO_L); // Pristi inerrupt bude od opacne hrany
INT0IF=0; // Povoleni dalsiho preruseni
enable_interrupts(INT_EXT);
enable_interrupts(GLOBAL);
// do
{
while(0==input(LASER)); // Ceka na detekci cary
// output_high(SERVO);
t1=get_timer0(); // Poznamena cas nabezne hrany
while(1==input(LASER)); // Ceka az zkonci cara
// output_low(SERVO);
t2=get_timer0(); // Poznamena cas sestupne hrany
t=t2-t1;
} while((t<3) || (t>20)); // Cara je detekovana, kdyz trva mezi xx ms
// if ((t>3) && (t<20)) uhel=(160-(read_adc()>>2))-t1;
// if (abs(olduhel-uhel)<40)
{
uhel=(160-(read_adc()>>2))-t1;
olduhel=uhel;
};
// uhel16=uhel;
// set_pwm1_duty(250-(uhel16<<2)); // Elektronicky diferencial
// set_pwm2_duty((uhel16));
set_adc_channel(CERNA);
}
else
{
edge=true;
ext_int_edge(L_TO_H); // Pristi inerrupt bude od opacne hrany
INT0IF=0; // Povoleni dalsiho preruseni
enable_interrupts(INT_EXT);
enable_interrupts(GLOBAL);
// do
{
while(0==input(LASER)); // Ceka na detekci cary
t1=get_timer0(); // Poznamena cas nabezne hrany
while(1==input(LASER)); // Ceka az zkonci cara
t2=get_timer0(); // Poznamena cas sestupne hrany
t=t2-t1;
} while((t<3) || (t>20)); // Cara je detekovana, kdyz trva mezi xx ms
if (abs(olduhel-uhel)<40)
{
// uhel=((read_adc()>>2)+32)+t1;
// olduhel=uhel;
};
set_adc_channel(CERVENA);
}
while(true);
}
 
 
 
void main()
{
 
setup_adc_ports(ALL_ANALOG); // Analogove vstupy pro cteni trimru
setup_adc(ADC_CLOCK_INTERNAL);
setup_spi(FALSE);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_256); // Casovac pro cteni laseru
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DIV_BY_4,255,1); // Casovac pro PWM cca 900Hz
setup_ccp1(CCP_PWM); // Nastaveni PWM pro diferencial RC1, RC2
setup_ccp2(CCP_PWM);
 
set_pwm1_duty(90); // Zastaveni PWM
set_pwm2_duty(90);
 
delay_ms(100);
set_adc_channel(CERVENA);
Delay_ms(1);
 
ext_int_edge(L_TO_H);
edge=true;
uhel=((read_adc()>>2)+32)+30;
olduhel=uhel;
 
enable_interrupts(INT_EXT);
enable_interrupts(GLOBAL);
 
delay_ms(1000);
 
output_high(MOT_DIR_L); // Oba motory vpred
output_high(MOT_DIR_R);
 
while(true);
}
/roboti/istrobot/Laserus/SW/PIC/873/laserus.h
0,0 → 1,15
#include <16F873.h>
#device adc=8
 
#FUSES NOWDT //No Watch Dog Timer
#FUSES XT //Crystal osc <= 4mhz
#FUSES NOPUT //No Power Up Timer
#FUSES NOPROTECT //Code not protected from reading
#FUSES NOBROWNOUT //No brownout reset
#FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#FUSES NOCPD //No EE protection
#FUSES NOWRT //Program memory not write protected
#FUSES NODEBUG //No Debug mode for ICD
 
#use delay(clock=4000000)